New: Loose IRQ or fail SCSI Commands under heavy I/O

http://bugme.osdl.org/show_bug.cgi?id=1156

Summary: Loose IRQ or fail SCSI Commands under heavy I/O
Kernel Version: 2.6.0-test2 and test 3
Status: NEW
Severity: high
Owner: [email protected]
Submitter: [email protected]

Distribution: Debian Testing

Hardware Environment: PIII 1 Gz on Intel 815ae2 mainboard
Software Environment: cdrecord or standard GNU commands
Problem Description:  Under heavy I/O performance lags and one of the devices 

(it changes every time) will loose it's IRQ. Sometimes the operation will continue, sometimes it will seg fault and every once in a while it will lock the PC, hard. When using SCSI emulation to a cd-rw drive cdrecord simply seg faults. When I reboot to 2.4.21 SCSI emulation works perfect. I have swapped out burners and tested on an Asus A7N8X based system with the same results.

Steps to reproduce:

Compile 2.6.0-test2 or 3 w/ SCSI emulation and appropriate support for hardware. Copy large amounts of data, 1 GB or more, from one drive to another, wait for IRQ to drop and lock-up the system or stop the transfer. Or merely attempt to burn a CD, it fails 2 out of 3 when burning CDs. Both problems are very consistent.

Device seems to be: Generic mmc CD-RW.
Current: 0x0002
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).

Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
FIFO size      : 4194304 = 4096 KB
Track 01: data   404 MB
Total size:      464 MB (46:00.98) = 207074 sectors
Lout start:      464 MB (46:02/74) = 207074 sectors
cdrecord: Input/output error. test unit ready: scsi sendcmd: no error

Segmentation Fault

I cannot post a copy of the IRQ failure becuase it's lock-up every time now.