Skip to contentSkip to conversation

Philips SPC 900NC PC Camera via usb with v4l

DISCUSSION maddin2010 2 participants 2 messages Jul 20, 2010 – Aug 11, 2010 Media (V4L/DVB)

lore
Share & tools
lore

maddin2010

author
#0 lore raw

Hi,

Iam trying to capture a video or an image from the Philips SPC 900NC PC Camera - Webcam.

I downloded the capture.c file and changed following lines.

...
//had to be replaced from - fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; to fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420;
fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
...

than after compiling and executing I get an output of dots.

Do I have to download somewhere a headerfile, becaue in the Spec is a header file which is not on the homepage.

What I need is a little push, so I maybe see an image or an video from the webcam, so that I can begin experimenting with it.

Is the video somewhere in the Memmory in form of a stream ?

Hopefully you can help me a bit,

Thx in advance,

Martin

Signature · 7 lines
View this message in context: http://video4linux-list.1448896.n2.nabble.com/Philips-SPC-900NC-PC-Camera-via-usb-with-v4l-tp5316010p5316010.html
Sent from the video4linux-list mailing list archive at Nabble.com.

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#1 lore raw

Hi Martin,

I'm not an expert on this, but with some help from this list I was able to get my SPC 600 NC working.  Let's start with some of the same diagnostics.

Is there an entry for your web cam when you execute the following command?

lsusb

One of my problems with the SPC 600 NC was the sn9c102 module was being erroneously loaded.  What do you get when you execute the following command?

lsmod | grep sn9c

In the case of the SPC 600 NC, I needed the system to use the gspca module.  I had to remove the sn9c102 module and then blacklist it so future kernel updates wouldn't reload it.

Let us know what you find,

Curt

--- On Tue, 7/20/10, maddin2010 <[email protected]> wrote:

From: maddin2010 <[email protected]>
Subject: Philips SPC 900NC PC Camera via usb with v4l
To: [email protected]
Date: Tuesday, July 20, 2010, 11:12 AM

Hi,

Iam trying to capture a video or an image from the Philips SPC 900NC PC Camera - Webcam.

I downloded the capture.c file and changed following lines.

...
//had to be replaced from - fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; to fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420; fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;
...

than after compiling and executing I get an output of dots.

Do I have to download somewhere a headerfile, becaue in the Spec is a header file which is not on the homepage.

What I need is a little push, so I maybe see an image or an video from the webcam, so that I can begin experimenting with it.

Is the video somewhere in the Memmory in form of a stream ?

Hopefully you can help me a bit,

Thx in advance,

Martin

Signature · 15 lines
View this message in context: http://video4linux-list.1448896.n2.nabble.com/Philips-SPC-900NC-PC-Camera-via-usb-with-v4l-tp5316010p5316010.html
Sent from the video4linux-list mailing list archive at Nabble.com.

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list



      
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list