Skip to contentSkip to conversation

scsi: scsi_debug: Fix atomic write enable module param description

PATCH Applied John Garry 3 participants 3 messages Dec 11, 2025 – Dec 17, 2025 SCSI

lore
Share & tools
lore

John Garry

author
#0 lore raw

PATCH 1/1 scsi: scsi_debug: Fix atomic write enable module param description

The atomic write enable module param is "atomic_wr", and not "atomic_write", so fix the module param description.

Fixes 84f3a3c01d70 ("scsi: scsi_debug: Atomic write support")
drivers/scsi/scsi_debug.c +1 -1
index b2ab97be5db3d..047d56d23beab 100644
@@ -7410,7 +7410,7 @@ MODULE_PARM_DESC(lbprz,
 MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
 MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
 MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
-MODULE_PARM_DESC(atomic_write, "enable ATOMIC WRITE support, support WRITE ATOMIC(16) (def=0)");
+MODULE_PARM_DESC(atomic_wr, "enable ATOMIC WRITE support, support WRITE ATOMIC(16) (def=0)");
 MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
 MODULE_PARM_DESC(lun_format, "LUN format: 0->peripheral (def); 1 --> flat address method");
 MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
Signature · 1 line
2.43.5
Reviewed-by on v1 1/1
#1 lore raw
Quoted 11 lines · John Garry

The atomic write enable module param is "atomic_wr", and not "atomic_write", so fix the module param description.

Fixes 84f3a3c01d70 ("scsi: scsi_debug: Atomic write support")
drivers/scsi/scsi_debug.c +0 -0
index b2ab97be5db3d..047d56d23beab 100644

drivers/scsi/scsi_debug.c MODULE_PARM_DESC(lbprz, · line 7416

Quoted 8 lines
drivers/scsi/scsi_debug.c +1 -1
@@ -7410,7 +7410,7 @@ MODULE_PARM_DESC(lbprz,
  MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
  MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
  MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
-MODULE_PARM_DESC(atomic_write, "enable ATOMIC WRITE support, support WRITE ATOMIC(16) (def=0)");
+MODULE_PARM_DESC(atomic_wr, "enable ATOMIC WRITE support, support WRITE ATOMIC(16) (def=0)");
  MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
  MODULE_PARM_DESC(lun_format, "LUN format: 0->peripheral (def); 1 --> flat address method");
  MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");