Skip to contentSkip to conversation

Char: isicom, fix card locking

PATCH New Jiri Slaby 1 participant 1 message Dec 6, 2006 1 message not in the archive Char and misc drivers

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Jiri Slaby

author
#1 lore raw

PATCH 1/1 Char: isicom, fix card locking

Quoted 79 lines · Eric Fox

Here is what i was able to capture from a terminal logged in to the machine with the ISI board:

strace setserial -g /dev/ttyM0
execve("/bin/setserial", ["setserial", "-g", "/dev/ttyM0"], [/* 17 vars */]) = 0
uname({sys="Linux", node="dialin-0.vab.com", ...}) = 0
brk(0) = 0x804d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=19713, ...}) = 0 old_mmap(NULL, 19713, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f05000
close(3) = 0
open("/lib/tls/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\36"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1454802, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7f04000
old_mmap(0x39d000, 1223900, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x39d000
old_mmap(0x4c2000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x124000) = 0x4c2000 old_mmap(0x4c6000, 7388, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4c6000
close(3) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7f03000
mprotect(0x4c2000, 4096, PROT_READ) = 0
mprotect(0x399000, 4096, PROT_READ) = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7f036c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0xb7f05000, 19713) = 0
open("/dev/ttyM0", O_RDWR|O_NONBLOCK

And, here is what I captured using minicom from another machine connected to the serial port console of the machine with the ISI board (minicom.cap):

strace setserial -g /dev/ttyM0
execve("/bin/setserial", ["setserial", "-g", "/dev/ttyM0"], [/* 17 vars */]) = 0
uname({sys="Linux", node="dialin-0.vab.com", ...BUG: soft lockup detected on CPU#1!

 [<c01041a3>] dump_trace+0x6b/0x1ab
 [<c010436a>] show_trace_log_lvl+0x17/0x2b
 [<c037ddb1>] __func__.5+0x84c/0x497af
DWARF2 unwinder stuck at __func__.5+0x84c/0x497af

Leftover inexact backtrace:

 [<c010438d>] show_trace+0xf/0x11
 [<c010446c>] dump_stack+0x13/0x15
 [<c0138dca>] softlockup_tick+0xa1/0xaf
 [<c0124bc2>] update_process_times+0x39/0x5c
 [<c0111219>] smp_apic_timer_interrupt+0x8a/0xa2
 [<c0103f0b>] apic_timer_interrupt+0x1f/0x24
 [<c0365437>] _spin_lock_irqsave+0x16/0x27
 [<f882407e>] lock_card_at_interrupt+0x17/0x47 [isicom]
 [<f88241ca>] isicom_tx+0x64/0xe9 [isicom]
 [<f8824166>] isicom_tx+0x0/0xe9 [isicom]
 [<c0124d00>] run_timer_softirq+0x112/0x15c
 [<c0120bd1>] __do_softirq+0x5e/0xba
 [<c0120c5b>] do_softirq+0x2e/0x32
 [<c011121e>] smp_apic_timer_interrupt+0x8f/0xa2
 [<c0103f0b>] apic_timer_interrupt+0x1f/0x24
 [<c0101973>] mwait_idle_with_hints+0x34/0x38
 [<c0101983>] mwait_idle+0xc/0x1b
 [<c010183f>] cpu_idle+0x66/0x7b
 =======================
BUG: soft lockup detected on CPU#1!
 [<c01041a3>] dump_trace+0x6b/0x1ab
 [<c010436a>] show_trace_log_lvl+0x17/0x2b
 [<c037ddb1>] __func__.5+0x84c/0x497af
DWARF2 unwinder stuck at __func__.5+0x84c/0x497af
Quoted 1 line

Hope some of this will help.

Certainly, it did, could you test the attached patch?

--
isicom, fix card locking

Somebody omitted spin_unlock in interrupt handler and hence card causes dead-lock. Add two unlocks, before returning from handler, if the lock was acquired before.
Thanks Eric Fox <[email protected]> for pointing this out.

---
commit 09a4c63d32367a615fc42a2e8455e5fd37f9c3ed
tree 2c2a050cbc551021d09a581d5cc16fd6a7934c69
parent e62438630ca37539c8cc1553710bbfaa3cf960a7
author Jiri Slaby <[email protected]> Wed, 06 Dec 2006 15:13:18 +0100 committer Jiri Slaby <[email protected]> Wed, 06 Dec 2006 15:18:43 +0100

 drivers/char/isicom.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/char/isicom.c +2 -0
index 58c955e..c55b359 100644
@@ -592,6 +592,7 @@ static irqreturn_t isicom_interrupt(int 
 			ClearInterrupt(base);
 		else
 			outw(0x0000, base+0x04); /* enable interrupts */
+		spin_unlock(&card->card_lock);
 		return IRQ_HANDLED;
 	}
 
@@ -712,6 +713,7 @@ static irqreturn_t isicom_interrupt(int 
 		ClearInterrupt(base);
 	else
 		outw(0x0000, base+0x04); /* enable interrupts */
+	spin_unlock(&card->card_lock);
 
 	return IRQ_HANDLED;
 }