serial: 8250_dw: Preserve original value of DLF register
Subsystems (3)
PATCH v3 1/1 serial: 8250_dw: Preserve original value of DLF register
Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters.
---
v3:
- modify the commit message
- use personal email to sign
drivers/tty/serial/8250/8250_dwlib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/tty/serial/8250/8250_dwlib.c +4 -2
@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)struct dw8250_port_data *pd = p->private_data;struct dw8250_data *data =to_dw8250_data (pd);struct uart_8250_port *up =up_to_u8250p (p); -u32 reg; +u32 reg, orig; pd->hw_rs485_support =dw8250_detect_rs485_hw (p);if (pd->hw_rs485_support) {
@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)dev_dbg (p->dev,"Designware UART version %c.%c%c\n" , (reg >>24 ) &0xff , (reg >>16 ) &0xff , (reg >>8 ) &0xff ); +/* Preserve value written by firmware or bootloader */ + orig =dw8250_readl_ext (p,DW_UART_DLF );dw8250_writel_ext (p,DW_UART_DLF , ~0U ); reg =dw8250_readl_ext (p,DW_UART_DLF ); -dw8250_writel_ext (p,DW_UART_DLF ,0 ); +dw8250_writel_ext (p,DW_UART_DLF , orig);if (reg) { pd->dlf_size =fls (reg);
Signature · 1 line
2.39.2
Quoted 4 lines · Ruihong Luo
Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters.
Eventually it gets to the point of clean and good fix, thank you!
Note, you are not supposed to do anything. Either Greg will pick this up after merge window closes, or he will comment on the issues he finds, if any. The process might take a few weeks (2 weeks of merge window + Greg's backlog size, which is huge).
Quoted 38 lines
Fixes 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")Signed-off-by Ruihong Luo <[email protected]>---
v3:
- modify the commit message
- use personal email to signdrivers/tty/serial/8250/8250_dwlib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)drivers/tty/serial/8250/8250_dwlib.c +4
-2@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)struct dw8250_port_data *pd = p->private_data;struct dw8250_data *data =to_dw8250_data (pd);struct uart_8250_port *up =up_to_u8250p (p); -u32 reg; +u32 reg, orig; pd->hw_rs485_support =dw8250_detect_rs485_hw (p);if (pd->hw_rs485_support) {@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)dev_dbg (p->dev,"Designware UART version %c.%c%c\n" , (reg >>24 ) &0xff , (reg >>16 ) &0xff , (reg >>8 ) &0xff ); +/* Preserve value written by firmware or bootloader */ + orig =dw8250_readl_ext (p,DW_UART_DLF );dw8250_writel_ext (p,DW_UART_DLF , ~0U ); reg =dw8250_readl_ext (p,DW_UART_DLF ); -dw8250_writel_ext (p,DW_UART_DLF ,0 ); +dw8250_writel_ext (p,DW_UART_DLF , orig);if (reg) { pd->dlf_size =fls (reg);Signature · 1 line
2.39.2
Signature · 2 lines
With Best Regards, Andy Shevchenko
Ilpo Järvinen
maintainerQuoted 6 lines · Ruihong Luo
Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters.
Fixes 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Add also:
Quoted 24 lines
Signed-off-by Ruihong Luo <[email protected]>---
v3:
- modify the commit message
- use personal email to signdrivers/tty/serial/8250/8250_dwlib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)drivers/tty/serial/8250/8250_dwlib.c +1
-1@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)struct dw8250_port_data *pd = p->private_data;struct dw8250_data *data =to_dw8250_data (pd);struct uart_8250_port *up =up_to_u8250p (p); -u32 reg; +u32 reg, orig; pd->hw_rs485_support =dw8250_detect_rs485_hw (p);if (pd->hw_rs485_support) {@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)dev_dbg (p->dev,"Designware UART version %c.%c%c\n" , (reg >>24 ) &0xff , (reg >>16 ) &0xff , (reg >>8 ) &0xff );
drivers/tty/serial/8250/8250_dwlib.c void dw8250_setup_port(struct uart_port *p) · line 280
Quoted 10 lines
drivers/tty/serial/8250/8250_dwlib.c +3
-1+/* Preserve value written by firmware or bootloader */ + orig =dw8250_readl_ext (p,DW_UART_DLF );dw8250_writel_ext (p,DW_UART_DLF , ~0U ); reg =dw8250_readl_ext (p,DW_UART_DLF ); -dw8250_writel_ext (p,DW_UART_DLF ,0 ); +dw8250_writel_ext (p,DW_UART_DLF , orig);if (reg) { pd->dlf_size =fls (reg);
The change looks good but I'd prefer the variable to be called old_dlf which is inline how 8250_port names its variables does when it preserves a registers across some auto-detection write.
Signature · 1 line
i.