Failure to build with LLVM for the Wii
Hi,
I’m trying to build the kernel for the Nintendo Wii, using LLVM instead of gcc, in order to bring Rust support to this architecture (and also because my distribution doesn’t ship a cross-compiling gcc), but I get this build issue near the end:
``` % make O=wii LLVM=1 ARCH=powerpc -j1 make[1]: Entering directory '/home/linkmauve/dev/linux/wii' GEN Makefile CALL ../scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers WRAP arch/powerpc/boot/dtbImage.wii objcopy: Unable to recognise the format of the input file `vmlinux' make[3]: *** [../arch/powerpc/boot/Makefile:394: arch/powerpc/boot/dtbImage.wii] Error 1 make[2]: *** [../arch/powerpc/Makefile:236: zImage] Error 2 make[1]: *** [/home/linkmauve/dev/linux/Makefile:248: __sub-make] Error 2 make[1]: Leaving directory '/home/linkmauve/dev/linux/wii' make: *** [Makefile:248: __sub-make] Error 2 ```
I believe it should use $(OBJCOPY) instead of objcopy, which is set to llvm-objcopy, but couldn’t figure out where it is misconfigured.
Thanks for your help!
Signature · 1 line
Link Mauve
Le 29/01/2026 à 11:55, Link Mauve a écrit :
Quoted 24 lines
[Vous ne recevez pas souvent de courriers de [email protected]. Découvrez pourquoi ceci est important à https://aka.ms/LearnAboutSenderIdentification ]
Hi,
I’m trying to build the kernel for the Nintendo Wii, using LLVM instead of gcc, in order to bring Rust support to this architecture (and also because my distribution doesn’t ship a cross-compiling gcc), but I get this build issue near the end:
``` % make O=wii LLVM=1 ARCH=powerpc -j1 make[1]: Entering directory '/home/linkmauve/dev/linux/wii' GEN Makefile CALL ../scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers WRAP arch/powerpc/boot/dtbImage.wii objcopy: Unable to recognise the format of the input file `vmlinux' make[3]: *** [../arch/powerpc/boot/Makefile:394: arch/powerpc/boot/dtbImage.wii] Error 1 make[2]: *** [../arch/powerpc/Makefile:236: zImage] Error 2 make[1]: *** [/home/linkmauve/dev/linux/Makefile:248: __sub-make] Error 2 make[1]: Leaving directory '/home/linkmauve/dev/linux/wii' make: *** [Makefile:248: __sub-make] Error 2 ```
Quoted 2 lines
I believe it should use $(OBJCOPY) instead of objcopy, which is set to llvm-objcopy, but couldn’t figure out where it is misconfigured.
Must be here I guess:
arch/powerpc/boot/wrapper:${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
arch/powerpc/boot/wrapper: ${CROSS}objcopy $4 $1 \
arch/powerpc/boot/wrapper: ${CROSS}objcopy -O binary "$ofile".elf "$ofile"
arch/powerpc/boot/wrapper: ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
arch/powerpc/boot/wrapper: ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"Hi Link,
Quoted 20 lines · Link Mauve
I’m trying to build the kernel for the Nintendo Wii, using LLVM instead of gcc, in order to bring Rust support to this architecture (and also because my distribution doesn’t ship a cross-compiling gcc), but I get this build issue near the end:
``` % make O=wii LLVM=1 ARCH=powerpc -j1 make[1]: Entering directory '/home/linkmauve/dev/linux/wii' GEN Makefile CALL ../scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers WRAP arch/powerpc/boot/dtbImage.wii objcopy: Unable to recognise the format of the input file `vmlinux' make[3]: *** [../arch/powerpc/boot/Makefile:394: arch/powerpc/boot/dtbImage.wii] Error 1 make[2]: *** [../arch/powerpc/Makefile:236: zImage] Error 2 make[1]: *** [/home/linkmauve/dev/linux/Makefile:248: __sub-make] Error 2 make[1]: Leaving directory '/home/linkmauve/dev/linux/wii' make: *** [Makefile:248: __sub-make] Error 2 ```
Quoted 4 lines
I believe it should use $(OBJCOPY) instead of objcopy, which is set to llvm-objcopy, but couldn’t figure out where it is misconfigured.
Thanks for your help!
It is the arch/powerpc/boot/wrapper script:
https://github.com/ClangBuiltLinux/linux/issues/1601
I have a WIP series from long ago that may be a good starting point for getting something working but there were some errors I never got around to solving before having to shelve it for other issues:
Maybe something I (or someone else) can get back to soon.
Cheers,
Nathan
Quoted 36 lines · Nathan Chancellor
Hi Link,
Quoted 20 lines · Link Mauve
I’m trying to build the kernel for the Nintendo Wii, using LLVM instead of gcc, in order to bring Rust support to this architecture (and also because my distribution doesn’t ship a cross-compiling gcc), but I get this build issue near the end:
``` % make O=wii LLVM=1 ARCH=powerpc -j1 make[1]: Entering directory '/home/linkmauve/dev/linux/wii' GEN Makefile CALL ../scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers WRAP arch/powerpc/boot/dtbImage.wii objcopy: Unable to recognise the format of the input file `vmlinux' make[3]: *** [../arch/powerpc/boot/Makefile:394: arch/powerpc/boot/dtbImage.wii] Error 1 make[2]: *** [../arch/powerpc/Makefile:236: zImage] Error 2 make[1]: *** [/home/linkmauve/dev/linux/Makefile:248: __sub-make] Error 2 make[1]: Leaving directory '/home/linkmauve/dev/linux/wii' make: *** [Makefile:248: __sub-make] Error 2 ```Quoted 4 lines
I believe it should use $(OBJCOPY) instead of objcopy, which is set to llvm-objcopy, but couldn’t figure out where it is misconfigured.
Thanks for your help!
It is the
arch/powerpc/boot/wrapperscript:https://github.com/ClangBuiltLinux/linux/issues/1601
I have a WIP series from long ago that may be a good starting point for getting something working but there were some errors I never got around to solving before having to shelve it for other issues:
Quoted 7 lines
Maybe something I (or someone else) can get back to soon.
Cheers,
Nathan
Hi Nathan,
your last 3 patches on this branch do indeed fix the wrapper script for the cross-compilation with LLVM=1 ARCH=powerpc without CROSS_COMPILE set or GNU binutils in PATH. They look good to me! Would you be willing to submit them now without touching the VDSO? That part does not seem to be necessary to fix the wrapper script for this usecase, so it should strictly be an improvement. I'd also be happy to pick up your patches, send them and follow-up on feedback if you don't want to do it yourself.
Best regards,
Aelin
Hi Aelin,
Quoted 47 lines · Aelin
Quoted 36 lines · Nathan Chancellor
Hi Link,
Quoted 20 lines · Link Mauve
I’m trying to build the kernel for the Nintendo Wii, using LLVM instead of gcc, in order to bring Rust support to this architecture (and also because my distribution doesn’t ship a cross-compiling gcc), but I get this build issue near the end:
``` % make O=wii LLVM=1 ARCH=powerpc -j1 make[1]: Entering directory '/home/linkmauve/dev/linux/wii' GEN Makefile CALL ../scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers WRAP arch/powerpc/boot/dtbImage.wii objcopy: Unable to recognise the format of the input file `vmlinux' make[3]: *** [../arch/powerpc/boot/Makefile:394: arch/powerpc/boot/dtbImage.wii] Error 1 make[2]: *** [../arch/powerpc/Makefile:236: zImage] Error 2 make[1]: *** [/home/linkmauve/dev/linux/Makefile:248: __sub-make] Error 2 make[1]: Leaving directory '/home/linkmauve/dev/linux/wii' make: *** [Makefile:248: __sub-make] Error 2 ```Quoted 4 lines
I believe it should use $(OBJCOPY) instead of objcopy, which is set to llvm-objcopy, but couldn’t figure out where it is misconfigured.
Thanks for your help!
It is the
arch/powerpc/boot/wrapperscript:https://github.com/ClangBuiltLinux/linux/issues/1601
I have a WIP series from long ago that may be a good starting point for getting something working but there were some errors I never got around to solving before having to shelve it for other issues:
Quoted 7 lines
Maybe something I (or someone else) can get back to soon.
Cheers,
NathanHi Nathan,
Quoted 7 lines
your last 3 patches on this branch do indeed fix the wrapper script for the cross-compilation with LLVM=1 ARCH=powerpc without
CROSS_COMPILEset or GNU binutils in PATH. They look good to me! Would you be willing to submit them now without touching the VDSO? That part does not seem to be necessary to fix the wrapper script for this usecase, so it should strictly be an improvement. I'd also be happy to pick up your patches, send them and follow-up on feedback if you don't want to do it yourself.
Thanks a lot for testing. For the record, I submitted the vDSO parts separately and it landed as
4406b12214f6 ("powerpc/vdso: Link with ld.lld when requested")
so it can safely be ignored altogether.
I am a little busy with things at the moment so I am not sure how soon I will be able to pick this up. I am more than happy to let you take over from here if you have the time and energy to get it tested and submitted now. You can either take full authorship or stick a Co-developed-by on it, does not matter to me.
Cheers,
Nathan
Hi!
Quoted 20 lines · Link Mauve
I’m trying to build the kernel for the Nintendo Wii, using LLVM instead of gcc, in order to bring Rust support to this architecture (and also because my distribution doesn’t ship a cross-compiling gcc), but I get this build issue near the end:
``` % make O=wii LLVM=1 ARCH=powerpc -j1 make[1]: Entering directory '/home/linkmauve/dev/linux/wii' GEN Makefile CALL ../scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers WRAP arch/powerpc/boot/dtbImage.wii objcopy: Unable to recognise the format of the input file `vmlinux' make[3]: *** [../arch/powerpc/boot/Makefile:394: arch/powerpc/boot/dtbImage.wii] Error 1 make[2]: *** [../arch/powerpc/Makefile:236: zImage] Error 2 make[1]: *** [/home/linkmauve/dev/linux/Makefile:248: __sub-make] Error 2 make[1]: Leaving directory '/home/linkmauve/dev/linux/wii' make: *** [Makefile:248: __sub-make] Error 2 ```
Quoted 2 lines
I believe it should use $(OBJCOPY) instead of objcopy, which is set to llvm-objcopy, but couldn’t figure out where it is misconfigured.
Other people already pointed you places, but to find out for yourself:
make V=1
will tell you all that happens. The kernel build system tries to not say much at all normally, but sometimes you want to see whatever is happening :-)
Segher