Skip to contentSkip to conversation

mm/resource: Move child to new resource when release mem region.

PATCH In review [email protected] 3 participants 3 messages Oct 10, 2019 – Oct 11, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mm/resource: Move child to new resource when release mem region.

From: Tianyu Lan <[email protected]>

When release mem region, old mem region may be splited to two regions. Current allocate new struct resource for high end mem region but not move child resources whose ranges are in the high end range to new resource. When adjust old mem region's range, adjust_resource() detects child region's range is out of new range and return error. Move child resources to high end resource before adjusting old mem range.

---
This patch is to prepare for memory hot-remove function in Hyper-V balloon driver.

---
 kernel/resource.c | 38 ++++++++++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)
kernel/resource.c +33 -4
index 158f04ec1d4f..7856347adfd2 100644
@@ -181,6 +181,38 @@ static struct resource *alloc_resource(gfp_t flags)
 	return res;
 }
 
+static void move_child_to_newresource(struct resource *old,
+				      struct resource *new)
+{
+	struct resource *tmp, **p, **np;
+
+	if (!old->child)
+		return;
+
+	p = &old->child;
+	np = &new->child;
+
+	for (;;) {
+		tmp = *p;
+		if (!tmp)
+			break;
+
+		if (tmp->start >= new->start && tmp->end <= new->end) {
+			tmp->parent = new;
+			*np = tmp;
+			np = &tmp->sibling;
+			*p = tmp->sibling;
+
+			if (!tmp->sibling)
+				*np = NULL;
+			continue;
+		}
+
+		p = &tmp->sibling;
+	}
+}
+
 /* Return the conflict entry if you can't request it */
 static struct resource * __request_resource(struct resource *root, struct resource *new)
 {
@@ -1231,9 +1263,6 @@ EXPORT_SYMBOL(__release_region);
  * Note:
  * - Additional release conditions, such as overlapping region, can be
  *   supported after they are confirmed as valid cases.
- * - When a busy memory resource gets split into two entries, the code
- *   assumes that all children remain in the lower address entry for
- *   simplicity.  Enhance this logic when necessary.
  */
 int release_mem_region_adjustable(struct resource *parent,
 				  resource_size_t start, resource_size_t size)
@@ -1316,11 +1345,12 @@ int release_mem_region_adjustable(struct resource *parent,
 			new_res->sibling = res->sibling;
 			new_res->child = NULL;
 
+			move_child_to_newresource(res, new_res);
+			res->sibling = new_res;
 			ret = __adjust_resource(res, res->start,
 						start - res->start);
 			if (ret)
 				break;
-			res->sibling = new_res;
 			new_res = NULL;
 		}
 
Signature · 1 line
2.14.5
#1 lore raw
Quoted 7 lines · On 10/10/19 12:28 AM, [email protected] wrote:

When release mem region, old mem region may be splited to two regions. Current allocate new struct resource for high end mem region but not move child resources whose ranges are in the high end range to new resource. When adjust old mem region's range, adjust_resource() detects child region's range is out of new range and return error. Move child resources to high end resource before adjusting old mem range.

From the comment, it appears the old code intended to have the behavior that you are changing. Could you explain _why_ this has become a problem for you?

#2 lore raw
Quoted 11 lines · On 10/10/2019 10:29 PM, Dave Hansen wrote:> On 10/10/19 12:28 AM…
Quoted 7 lines

When release mem region, old mem region may be splited to two regions. Current allocate new struct resource for high end mem region but not move child resources whose ranges are in the high end range to new resource. When adjust old mem region's range, adjust_resource() detects child region's range is out of new range and return error. Move child resources to high end resource before adjusting old mem range.

From the comment, it appears the old code intended to have the behavior
that you are changing. Could you explain _why_ this has become a problem for you?

Hi Dave:
Thanks for your review. current code assumes that all children remain in
the lower address entry for simplicity. For memory hot-remove, selecting
remove region via scanning system memory may hit case of child in the higher address entry.

For example, the following output from /proc/iomem shows kernel code, data and bss locate from 3a000000 to 3b5fffff and these resources are the system ram resource's children. If the 39800000-39ffffff was selected as remove range, the resource will be split into two ranges 00100000-397fffff and 39800000-b87f1fff. Current code move kernel image related resources under 00100000-397fffff resource. This will cause adjust_resource() return error because children are not in the parent's range.

00100000-b87f1fff : System RAM
3a000000-3ac00e80 : Kernel code
3ac00e81-3b33883f : Kernel data
3b4d3000-3b5fffff : Kernel bss