nfsd: fix handling of readdir in v4root vs. mount upcall timeout
Subsystems (2)
Jeff Layton
maintainerPATCH 1/1 nfsd: fix handling of readdir in v4root vs. mount upcall timeout
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set RDATTR_ERROR for it to the error.
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
--- fs/nfsd/nfs4xdr.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
fs/nfsd/nfs4xdr.c +12 -0
@@ -3588,6 +3588,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,struct readdir_cd *ccd = ccdv; struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);struct xdr_stream *xdr = cd->xdr; +struct svc_export *exp = cd->rd_fhp->fh_export;int start_offset = xdr->buf->len;int cookie_offset;u32 name_and_cookie;
@@ -3629,6 +3630,17 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,case nfserr_noent:xdr_truncate_encode (xdr, start_offset); goto skip_entry; +case nfserr_jukebox: +/* +* The pseudoroot should only display dentries that lead to +* exports. If we get EJUKEBOX here, then we can't tell whether +* this entry should be included. Just fail the whole READDIR +* with NFS4ERR_DELAY in that case, and hope that the situation +* will resolve itself by the client's next attempt. +*/ +if (exp->ex_flags &NFSEXP_V4ROOT ) + goto fail; + fallthrough;default :/* * If the client requested the RDATTR_ERROR attribute,
Signature · 1 line
2.38.1
Quoted 8 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.
Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 41 lines
Cc Steve Dickson <[email protected]>Reported-by JianHong Yin <[email protected]>Signed-off-by Jeff Layton <[email protected]>---
fs/nfsd/nfs4xdr.c| 12 ++++++++++++1 file changed, 12 insertions(+)fs/nfsd/nfs4xdr.c +12
-0@@ -3588,6 +3588,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,struct readdir_cd *ccd = ccdv; struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);struct xdr_stream *xdr = cd->xdr; +struct svc_export *exp = cd->rd_fhp->fh_export;int start_offset = xdr->buf->len;int cookie_offset;u32 name_and_cookie;@@ -3629,6 +3630,17 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,case nfserr_noent:xdr_truncate_encode (xdr, start_offset); goto skip_entry; +case nfserr_jukebox: +/* +* The pseudoroot should only display dentries that lead to +* exports. If we get EJUKEBOX here, then we can't tell whether +* this entry should be included. Just fail the whole READDIR +* with NFS4ERR_DELAY in that case, and hope that the situation +* will resolve itself by the client's next attempt. +*/ +if (exp->ex_flags &NFSEXP_V4ROOT ) + goto fail; + fallthrough;default :/* * If the client requested the RDATTR_ERROR attribute, Signature · 1 line
2.38.1
--
Chuck Lever
Jeff Layton
maintainerQuoted 15 lines · Chuck Lever III
Quoted 7 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Mounting doesn't usually require working READDIR. In that situation, a readdir() might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.
If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
Quoted 48 lines
Quoted 42 lines
Cc Steve Dickson <[email protected]>Reported-by JianHong Yin <[email protected]>Signed-off-by Jeff Layton <[email protected]>---
fs/nfsd/nfs4xdr.c| 12 ++++++++++++1 file changed, 12 insertions(+)fs/nfsd/nfs4xdr.c +12
-0@@ -3588,6 +3588,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,struct readdir_cd *ccd = ccdv; struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);struct xdr_stream *xdr = cd->xdr; +struct svc_export *exp = cd->rd_fhp->fh_export;int start_offset = xdr->buf->len;int cookie_offset;u32 name_and_cookie;@@ -3629,6 +3630,17 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,case nfserr_noent:xdr_truncate_encode (xdr, start_offset); goto skip_entry; +case nfserr_jukebox: +/* +* The pseudoroot should only display dentries that lead to +* exports. If we get EJUKEBOX here, then we can't tell whether +* this entry should be included. Just fail the whole READDIR +* with NFS4ERR_DELAY in that case, and hope that the situation +* will resolve itself by the client's next attempt. +*/ +if (exp->ex_flags &NFSEXP_V4ROOT ) + goto fail; + fallthrough;default :/* * If the client requested the RDATTR_ERROR attribute, Signature · 1 line
2.38.1--
Chuck Lever
Signature · 1 line
Jeff Layton <[email protected]>
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
Ian
Jeff Layton
maintainerQuoted 35 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in follow_down().
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Signature · 1 line
Jeff Layton <[email protected]>
Quoted 47 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().
Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Quoted 6 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Yep, saw that, ;)
Ian
Quoted 74 lines · Ian Kent
Quoted 47 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Quoted 1 line
Quoted 7 lines
Quoted 5 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Yep, saw that, ;)
I'm not sure if there is consensus on this patch.
It's been pushed to nfsd's for-rc branch for wider testing, but if there's a strong objection I can pull it out before the next -rc PR.
--
Chuck Lever
Quoted 84 lines · Chuck Lever III
Quoted 81 lines · Ian Kent
Quoted 47 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Quoted 6 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Quoted 6 lines
Quoted 1 line
Yep, saw that, ;)
I'm not sure if there is consensus on this patch.
It's been pushed to nfsd's for-rc branch for wider testing, but if there's a strong objection I can pull it out before the next -rc PR.
Also, do we agree that it should get a "Cc: stable" tag?
--
Chuck Lever
Jeff Layton
maintainerQuoted 83 lines · Chuck Lever III
Quoted 83 lines · Chuck Lever III
Quoted 81 lines · Ian Kent
Quoted 47 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Quoted 6 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Quoted 9 lines
Quoted 6 lines
Quoted 1 line
Yep, saw that, ;)
I'm not sure if there is consensus on this patch.
It's been pushed to nfsd's for-rc branch for wider testing, but if there's a strong objection I can pull it out before the next -rc PR.
Also, do we agree that it should get a "Cc: stable" tag?
Yes, I think so. This potentially exposes some info to clients that they really shouldn't have.
Signature · 1 line
Jeff Layton <[email protected]>
Quoted 75 lines · Chuck Lever III
Quoted 75 lines · Ian Kent
Quoted 46 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Quoted 5 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Quoted 5 lines
Quoted 1 line
Yep, saw that, ;)
I'm not sure if there is consensus on this patch.
It's been pushed to nfsd's for-rc branch for wider testing, but if there's a strong objection I can pull it out before the next -rc PR.
I don't have any objections, my original comment about it breaking
existing behavior has been addressed.
The only reason I've commented further is because of my time with
automounting but, as Jeff kind-off points out nfsd is not quite the
same as what I'm used to, specifically the way exports are implemented
in nfsd.
Still you never know, my comments may trigger a thought in someone along
the way, ;)
Ian
Quoted 80 lines · Ian Kent
Quoted 78 lines · Chuck Lever III
Quoted 70 lines · Ian Kent
Quoted 46 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Quoted 6 lines
Quoted 5 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Yep, saw that, ;)
I'm not sure if there is consensus on this patch.
Quoted 7 lines
Quoted 2 lines
It's been pushed to nfsd's for-rc branch for wider testing, but if there's a strong objection I can pull it out before the next -rc PR.
I don't have any objections, my original comment about it breaking
existing behavior has been addressed.
Actually I'm confused with the other patch series Jeff mentioned.
I still don't have any objections, ;)
I was a little curious about the error handling but that's
because my memories of the jukebox error handling on the client
side are different to what's being done but here it's the server
so it makes sense to assume the client will do the work and retry
or whatever.
Ian
Jeff Layton
maintainerQuoted 60 lines · Ian Kent
Quoted 47 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Quoted 8 lines
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
it gets walked into but it's usually the only sane choice.
Yes, it does need to already be mounted.
The proposed kernel patches from Richard only trigger an automount if the parent mount is exported with -o crossmnt. I think this is necessary to avoid nfs client activity triggering automounts of filesystems that are not exported.
Quoted 8 lines
Quoted 7 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.
Signature · 1 line
Jeff Layton <[email protected]>
Quoted 65 lines · Jeff Layton
Quoted 64 lines · Ian Kent
Quoted 46 lines · Jeff Layton
Quoted 34 lines · Ian Kent
Quoted 23 lines · Jeff Layton
Quoted 13 lines · Chuck Lever III
Quoted 6 lines · Jeff Layton
If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set
RDATTR_ERRORfor it to the error.Quoted 7 lines
That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports.
If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation.
Quoted 9 lines
Thank you for chasing this down!
Failing the whole READDIR when mountd times out might be a bad idea. If the mountd upcall times out every time, the client can't make any progress and will continue to emit the failing READDIR request.
Would it be better to skip the unresolvable entry instead and let the READDIR succeed without that entry?
Quoted 6 lines
Mounting doesn't usually require working READDIR. In that situation, a
readdir()might hang (until the client kills), but a lookup of other dentries that aren't perpetually stalled should be ok in this situation.If mountd is that hosed then I think it's unlikely that any progress will be possible anyway.
The READDIR shouldn't trigger a mount yes, but if it's a valid automount
point (basically a valid dentry in this case I think) it should be listed.
Quoted 9 lines
It certainly shouldn't hold up the READDIR, passing into it is when a
mount should occur.
That's usually the behavior we want for automounts, we don't want mount
storms on directories full of automount points.
We only want to display it if it's a valid _exported_ mountpoint.
Quoted 8 lines
The idea here is to only reveal the parts of the namespace that are exported in the nfsv4 pseudoroot. The "normal" contents are not shown -- only exported mountpoints and ancestor directories of those mountpoints.
We don't want mountd triggering automounts, in general. If the underlying filesystem was exported, then it should also already be mounted, since nfsd doesn't currently trigger automounts in
follow_down().Umm ... must they already be mounted?
Can't it be a valid mount point either not yet mounted or timed out
and umounted. In that case shouldn't it be listed, I know that's
not the that good an outcome because its stat info will change when
Quoted 8 lines
Quoted 2 lines
it gets walked into but it's usually the only sane choice.
Yes, it does need to already be mounted.
The proposed kernel patches from Richard only trigger an automount if the parent mount is exported with -o crossmnt. I think this is necessary to avoid nfs client activity triggering automounts of filesystems that are not exported.
I'll be interested to see how this goes.
Over the years I've had a lot of difficulty with automount unwanted
mounting ...
Still nfsd exports are a bit like invisible dentry trees to the local
system aren't they ... so this situation is very different to what
I've worked on ...
Ian
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
There is also a separate patchset by Richard Weinberger to allow nfsd to trigger automounts if the parent filesystem is exported with -o crossmnt. That should be ok with this patch, since the automount will be triggered before the upcall to mountd. That should ensure that it's already mounted by the time we get to upcalling for its export.