arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
Subsystems (2)
PATCH v4 1/1 arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
CAN instance 0 in the mcu domain is brought on the J721E-SK board through header J1. Thus, add its respective transceiver 1 dt node to add support for this CAN instance.
CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK board through headers J5, J6 and J2 respectively. Thus, add their respective transceivers 2, 3 and 4 dt nodes to add support for these CAN instances.
---
Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3
v4: Changelog:
1) Made transceiver ID and can-phy ID in sync for all applicable nodes
Link to v3:
https://lore.kernel.org/all/[email protected]/
v3: Changelog:
1) Updated board name in capital letters in commit message description
2) Updated test logs to include communication between all applicable CAN instances
Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
v2: Changelog:
1) Re-ordered status = "okay" property to the end of all applicable dt nodes following kernel documentation
Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++ 1 file changed, 116 insertions(+)
arch/arm64/boot/dts/ti/k3-j721e-sk.dts +116 -0
@@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 { <3300000 0x1>; }; + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_gpio_pins_default>; + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_gpio_pins_default>; + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>; + }; + + transceiver4: can-phy4 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_gpio_pins_default>; + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>; + }; + dp_pwr_3v3: fixedregulator-dp-prw { compatible = "regulator-fixed"; regulator-name = "dp-pwr";
@@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ >; }; + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ + >; + }; + + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */ + >; + }; + + main_mcan5_pins_default: main-mcan5-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */ + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */ + >; + }; + + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */ + >; + }; + + main_mcan9_pins_default: main-mcan9-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */ + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */ + >; + }; + + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
@@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */ + >; + }; + /* Reset for M.2 M Key slot on PCIe1 */ mkey_reset_pins_default: mkey-reset-pns-default-pins { pinctrl-single,pins = <
@@ -1108,6 +1196,34 @@ &pcie1_rc { num-lanes = <2>; }; +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +&main_mcan9 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + &ufs_wrapper { status = "disabled"; };
Signature · 1 line
2.34.1
LGTM :)
Quoted 10 lines · Beleswar Padhi
CAN instance 0 in the mcu domain is brought on the J721E-SK board through header J1. Thus, add its respective transceiver 1 dt node to add support for this CAN instance.
CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK board through headers J5, J6 and J2 respectively. Thus, add their respective transceivers 2, 3 and 4 dt nodes to add support for these CAN instances.
Signed-off-by Beleswar Padhi <[email protected]>
Quoted 175 lines
---
Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3v4: Changelog:
1) Made transceiver ID and can-phy ID in sync for all applicable nodesLink to v3:
https://lore.kernel.org/all/[email protected]/v3: Changelog:
1) Updated board name in capital letters in commit message description
2) Updated test logs to include communication between all applicable CAN instancesLink to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/v2: Changelog:
1) Re-ordered status = "okay" property to the end of all applicable dt nodes following kernel documentationLink to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++ 1 file changed, 116 insertions(+)arch/arm64/boot/dts/ti/k3-j721e-sk.dts +116
-0@@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 { <3300000 0x1>; }; + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_gpio_pins_default>; + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_gpio_pins_default>; + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>; + }; + + transceiver4: can-phy4 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_gpio_pins_default>; + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>; + }; + dp_pwr_3v3: fixedregulator-dp-prw { compatible = "regulator-fixed"; regulator-name = "dp-pwr";@@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ >; }; + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ + >; + }; + + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */ + >; + }; + + main_mcan5_pins_default: main-mcan5-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */ + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */ + >; + }; + + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */ + >; + }; + + main_mcan9_pins_default: main-mcan9-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */ + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */ + >; + }; + + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */@@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */ + >; + }; + /* Reset for M.2 M Key slot on PCIe1 */ mkey_reset_pins_default: mkey-reset-pns-default-pins { pinctrl-single,pins = <@@ -1108,6 +1196,34 @@ &pcie1_rc { num-lanes = <2>; }; +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +&main_mcan9 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + &ufs_wrapper { status = "disabled"; };
Hi Beleswar Padhi,
Quoted 10 lines · Beleswar Padhi
CAN instance 0 in the mcu domain is brought on the J721E-SK board through header J1. Thus, add its respective transceiver 1 dt node to add support for this CAN instance.
CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK board through headers J5, J6 and J2 respectively. Thus, add their respective transceivers 2, 3 and 4 dt nodes to add support for these CAN instances.
[...]
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/1] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
commit: 021d3d5f0741e5393a7a110ac909fc746b1e0a4d
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh