s390x: Ignore gcc 12 warnings for low addresses
PATCH 1/1 s390x: Ignore gcc 12 warnings for low addresses
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.
---
Alternatives:
* Use memory clobber instead of memory output
Use address in register input instead of memory input
(may require WRITE_ONCE)
* Disable the warning globally
* Don't use gcc 12.0, with newer versions --param=min-pagesize=0 might avoid the problem
lib/s390x/asm/cpacf.h | 7 +++++++ s390x/skey.c | 7 +++++++ 2 files changed, 14 insertions(+)
lib/s390x/asm/cpacf.h +7 -0
@@ -152,6 +152,12 @@ static __always_inline void __cpacf_query(unsigned int opcode, cpacf_mask_t *mas register unsigned long r0 asm("0") = 0; /* query function */ register unsigned long r1 asm("1") = (unsigned long) mask; +/* +* gcc 12.0.1 warns if mask is < 4k. +* We use such addresses to test invalid or protected mask arguments. +*/ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Warray-bounds" asmvolatile (" spm 0\n" /* pckmo doesn't change the cc */ /* Parameter regs are ignored, but must be nonzero and unique */
@@ -160,6 +166,7 @@ static __always_inline void __cpacf_query(unsigned int opcode, cpacf_mask_t *mas : "=m" (*mask) : [fc] "d" (r0), [pba] "a" (r1), [opc] "i" (opcode) : "cc"); +#pragma GCC diagnostic pop }static inline int __cpacf_check_opcode (unsigned int opcode)
s390x/skey.c +7 -0
@@ -242,12 +242,19 @@ static void test_store_cpu_address(void)*/ static void set_prefix_key_1 (uint32_t *prefix_ptr) { +/* +* gcc 12.0.1 warns if prefix_ptr is < 4k. +* We need such addresses to test fetch protection override. +*/ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Warray-bounds" asmvolatile ("spka 0x10\n\t" "spx %0\n\t" "spka 0\n" ::"Q" (*prefix_ptr) ); +#pragma GCC diagnostic pop }/*
base-commit: c315f52b88b967cfb4cd58f3b4e1987378c47f3b
Signature · 1 line
2.33.1
Quoted 5 lines · On Mon, 16 May 2022 16:43:32 +0200 Janis Schoetterl-Glausch…
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.
I really dislike this
Quoted 8 lines
Signed-off-by Janis Schoetterl-Glausch <[email protected]>---
Alternatives:
* Use memory clobber instead of memory output Use address in register input instead of memory input (may requireWRITE_ONCE)
this sounds better. would you also get rid of the asm("0") annotations on the variables? I really dislike those too
Quoted 59 lines
* Disable the warning globally
* Don't use gcc 12.0, with newer versions --param=min-pagesize=0 might avoid the problemlib/s390x/asm/cpacf.h | 7 +++++++ s390x/skey.c | 7 +++++++ 2 files changed, 14 insertions(+)lib/s390x/asm/cpacf.h +7
-0@@ -152,6 +152,12 @@ static __always_inline void __cpacf_query(unsigned int opcode, cpacf_mask_t *mas register unsigned long r0 asm("0") = 0; /* query function */ register unsigned long r1 asm("1") = (unsigned long) mask; +/* +* gcc 12.0.1 warns if mask is < 4k. +* We use such addresses to test invalid or protected mask arguments. +*/ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Warray-bounds" asmvolatile (" spm 0\n" /* pckmo doesn't change the cc */ /* Parameter regs are ignored, but must be nonzero and unique */@@ -160,6 +166,7 @@ static __always_inline void __cpacf_query(unsigned int opcode, cpacf_mask_t *mas : "=m" (*mask) : [fc] "d" (r0), [pba] "a" (r1), [opc] "i" (opcode) : "cc"); +#pragma GCC diagnostic pop }static inline int __cpacf_check_opcode (unsigned int opcode)s390x/skey.c +7
-0@@ -242,12 +242,19 @@ static void test_store_cpu_address(void)*/ static void set_prefix_key_1 (uint32_t *prefix_ptr) { +/* +* gcc 12.0.1 warns if prefix_ptr is < 4k. +* We need such addresses to test fetch protection override. +*/ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Warray-bounds" asmvolatile ("spka 0x10\n\t" "spx %0\n\t" "spka 0\n" ::"Q" (*prefix_ptr) ); +#pragma GCC diagnostic pop }/* base-commit:
c315f52b88b967cfb4cd58f3b4e1987378c47f3b
Quoted 10 lines · Claudio Imbrenda
Quoted 5 lines · On Mon, 16 May 2022 16:43:32 +0200 Janis Schoetterl-Glausch…
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.I really dislike this
I agree the pragmas are ugly. But maybe we should mimic what the kernel is doing here?
$ git show 8b202ee218395 commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 Author: Sven Schnelle <[email protected]> Date: Mon Apr 25 14:17:42 2022 +0200
s390: disable -Warray-bounds
gcc-12 shows a lot of array bound warnings on s390. This is caused by the S390_lowcore macro which uses a hardcoded address of 0.
Wrapping that with absolute_pointer() works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution.
... so we should maybe disable it in the Makefile, too, until the kernel folks found a nicer solution?
Thomas
Quoted 33 lines · On Tue, 17 May 2022 18:09:54 +0200 Thomas Huth <[email protected]> wrote:
Quoted 10 lines · Claudio Imbrenda
Quoted 5 lines · On Mon, 16 May 2022 16:43:32 +0200 Janis Schoetterl-Glausch…
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.I really dislike this
I agree the pragmas are ugly. But maybe we should mimic what the kernel is doing here?
$ git show 8b202ee218395 commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 Author: Sven Schnelle <[email protected]> Date: Mon Apr 25 14:17:42 2022 +0200s390: disable -Warray-bounds
gcc-12 shows a lot of array bound warnings on s390. This is caused by the
S390_lowcoremacro which uses a hardcoded address of 0.Wrapping that with
absolute_pointer()works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution.
Quoted 2 lines
... so we should maybe disable it in the
Makefile, too, until the kernel folks found a nicer solution?
it's a bit extreme, but if it's good enough for the kernel, it's good enough for us
Quoted 3 lines
Thomas
Quoted 31 lines · Thomas Huth
Quoted 10 lines · Claudio Imbrenda
Quoted 5 lines · On Mon, 16 May 2022 16:43:32 +0200 Janis Schoetterl-Glausch…
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.I really dislike this
I agree the pragmas are ugly. But maybe we should mimic what the kernel is doing here?
$ git show 8b202ee218395 commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 Author: Sven Schnelle <[email protected]> Date: Mon Apr 25 14:17:42 2022 +0200s390: disable -Warray-bounds
gcc-12 shows a lot of array bound warnings on s390. This is caused by theS390_lowcoremacro which uses a hardcoded address of 0. Wrapping that withabsolute_pointer()works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution.
Quoted 5 lines
... so we should maybe disable it in the
Makefile, too, until the kernel folks found a nicer solution?Thomas
Neat, wasn't aware of that commit.
I don't think we need to concern ourselves with performance in this case and can define
+#define HIDE_PTR(ptr) \
+({ \
+ uint64_t __ptr; \
+ asm ("" : "=d" (__ptr) : "0" (ptr)); \
+ (typeof(ptr))__ptr; \+})
+
in some header (which?).
Another alternative would be to define some extern symbols for the addresses we want to use. It might be nice to have a symbol for the lowcore anyway, then we can get rid of
static struct lowcore *lc;
struct lowcore *lc = (struct lowcore *)0x0;
...
in a bunch of tests.
And use that symbol to derive the addresses we want to use.emulator.c uses -1 to generate an addressing exception, we either need another symbol for that or use another invalid address. (Can't get to -1 from lowcore/0 because the max array size is signed int64 max)
Quoted 52 lines · Janis Schoetterl-Glausch
Quoted 31 lines · Thomas Huth
Quoted 10 lines · Claudio Imbrenda
Quoted 5 lines · On Mon, 16 May 2022 16:43:32 +0200 Janis Schoetterl-Glausch…
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.I really dislike this
I agree the pragmas are ugly. But maybe we should mimic what the kernel is doing here?
$ git show 8b202ee218395 commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 Author: Sven Schnelle <[email protected]> Date: Mon Apr 25 14:17:42 2022 +0200s390: disable -Warray-bounds
gcc-12 shows a lot of array bound warnings on s390. This is caused by theS390_lowcoremacro which uses a hardcoded address of 0. Wrapping that withabsolute_pointer()works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution.Quoted 5 lines
... so we should maybe disable it in the
Makefile, too, until the kernel folks found a nicer solution?Thomas
Neat, wasn't aware of that commit.
I don't think we need to concern ourselves with performance in this case and can define
(quoted diff) +7
-0+#define HIDE_PTR(ptr) \ +({ \ + uint64_t __ptr; \ + asm ("" : "=d" (__ptr) : "0" (ptr)); \ + (typeof(ptr))__ptr; \ +}) +in some header (which?).
Quoted 8 lines
Another alternative would be to define some extern symbols for the addresses we want to use. It might be nice to have a symbol for the lowcore anyway, then we can get rid of
static struct lowcore *lc;
struct lowcore *lc = (struct lowcore *)0x0;
...in a bunch of tests.
I like that idea.
Quoted 4 lines
And use that symbol to derive the addresses we want to use.
emulator.cuses -1 to generate an addressing exception, we either need another symbol for that or use another invalid address. (Can't get to -1 from lowcore/0 because the max array size is signed int64 max)
Maybe use INT64_MAX or something similar? Would that work?
Thomas
Quoted 64 lines · Thomas Huth
Quoted 52 lines · Janis Schoetterl-Glausch
Quoted 31 lines · Thomas Huth
Quoted 10 lines · Claudio Imbrenda
Quoted 5 lines · On Mon, 16 May 2022 16:43:32 +0200 Janis Schoetterl-Glausch…
gcc 12 warns if a memory operand to inline asm points to memory in the first 4k bytes. However, in our case, these operands are fine, either because we actually want to use that memory, or expect and handle the resulting exception.
Therefore, silence the warning.I really dislike this
I agree the pragmas are ugly. But maybe we should mimic what the kernel is doing here?
$ git show 8b202ee218395 commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 Author: Sven Schnelle <[email protected]> Date: Mon Apr 25 14:17:42 2022 +0200s390: disable -Warray-bounds
gcc-12 shows a lot of array bound warnings on s390. This is caused by theS390_lowcoremacro which uses a hardcoded address of 0. Wrapping that withabsolute_pointer()works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution.Quoted 5 lines
... so we should maybe disable it in the
Makefile, too, until the kernel folks found a nicer solution?Thomas
Neat, wasn't aware of that commit.
I don't think we need to concern ourselves with performance in this case and can define
(quoted diff) +7
-0+#define HIDE_PTR(ptr) \ +({ \ + uint64_t __ptr; \ + asm ("" : "=d" (__ptr) : "0" (ptr)); \ + (typeof(ptr))__ptr; \ +}) +in some header (which?).
Quoted 8 lines
Another alternative would be to define some extern symbols for the addresses we want to use. It might be nice to have a symbol for the lowcore anyway, then we can get rid of
static struct lowcore *lc;
struct lowcore *lc = (struct lowcore *)0x0;
...in a bunch of tests.
I like that idea.
Quoted 6 lines
Quoted 4 lines
And use that symbol to derive the addresses we want to use.
emulator.cuses -1 to generate an addressing exception, we either need another symbol for that or use another invalid address. (Can't get to -1 from lowcore/0 because the max array size is signed int64 max)Maybe use
INT64_MAXor something similar? Would that work?
I did it slightly different than in my prototype --- used a pointer instead of an array, doesn't matter then.
Quoted 3 lines
Thomas