frame buffer compression and 915GM
Dear All.
How can I find out if FBC is disabled/enabled for my i915GM on kernel 2.6.38.6-27 and on rawhide 2.6.39-1.
Thanks
Quoted 5 lines · SD
Dear All.
How can I find out if FBC is disabled/enabled for my i915GM on kernel 2.6.38.6-27 and on rawhide 2.6.39-1.
Thanks
debugfs has it. For example:
cat /sys/kernel/debug/dri/0/i915_fbc_status
Ben
OK, thank you. I checked it, and I got unexpected answer -
FBC unsupported on this chipset.
But on my old OpenSuse:
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-xmc2 2.6.27.45-0.1-pae #1 SMP 2010-02-22 16:49:47 +0100 i686 Build Date: 22 September 2010 11:23:20AM
...
(**) intel(0): Option "FramebufferCompression" "on"
...
(**) intel(0): Framebuffer compression enabled
...
As you can see - It was supported 3 years ago.
I would like to know why now FBC becomes unsupported ?
Thank you.
I also get "FBC unsupported on this chipset" with 2.6.38.6 on i945GM, although I can remember it used to work a year ago or so. Have there been some correctness checks that disable it on hardware known to be bugged?
Thanks, Clemens
2011/5/27 SD <[email protected]>:
Quoted 22 lines
OK, thank you. I checked it, and I got unexpected answer -
FBC unsupported on this chipset.
But on my old OpenSuse:
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-xmc2 2.6.27.45-0.1-pae #1 SMP 2010-02-22 16:49:47 +0100 i686 Build Date: 22 September 2010 11:23:20AM
...(**) intel(0): Option "FramebufferCompression" "on"
...
(**) intel(0): Framebuffer compression enabled
...As you can see - It was supported 3 years ago.
Quoted 8 lines
I would like to know why now FBC becomes unsupported ?
Thank you.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · Clemens Eisserer
From: Clemens Eisserer <[email protected]>
Subject: Re: [Intel-gfx] frame buffer compression and 915GM
To: "intel-gfx" <[email protected]>
Date: Friday, May 27, 2011, 6:50 PM
I also get "FBC unsupported on this
chipset" with 2.6.38.6 on i945GM,
although I can remember it used to work a year ago or so. Have there been some correctness checks that disable it on hardware
known to be bugged?
Quoted 1 line
Thanks, Clemens
Unsupported, disabled, enabled are different things.
If FBC supported it can be disabled/enabled.
If it is unsupported it means that something is wrong with detection, because second OS on the same laptop - 3 years old OpenSuse uses it without problems.
Thank you.
Quoted 40 lines
2011/5/27 SD <[email protected]>:
Quoted 1 line
OK, thank you. I checked it, and I got unexpected
answer -
Quoted 11 lines
FBC unsupported on this chipset.
But on my old OpenSuse:
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-xmc22.6.27.45-0.1-pae #1 SMP 2010-02-22 16:49:47 +0100 i686
Quoted 11 lines
Build Date: 22 September 2010 11:23:20AM
...(**) intel(0): Option "FramebufferCompression" "on"
...
(**) intel(0): Framebuffer compression enabled
...As you can see - It was supported 3 years ago.
I would like to know why now FBC becomes unsupported
?
Quoted 7 lines
Thank you.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 3 lines · SD
OK, thank you. I checked it, and I got unexpected answer -
FBC unsupported on this chipset.
I'd need to know exactly which chipset you have. For example. Ironlake mobile, we disabled FBC because it was actually consuming more power.
You can check your specific chipset, and look at the has_fbc field here:drivers/gpu/drm/i915/i915_drv.c
Ben
Quoted 17 lines · Ben Widawsky
From: Ben Widawsky <[email protected]>
Subject: Re: [Intel-gfx] frame buffer compression and 915GM
To: "SD" <[email protected]>
Cc: [email protected]
Date: Friday, May 27, 2011, 11:48 PMQuoted 1 line · SD
OK, thank you. I checked it, and I got unexpected
answer -
Quoted 2 lines
FBC unsupported on this chipset.
I'd need to know exactly which chipset you have. For example. Ironlake
mobile, we disabled FBC because it was actually consuming more power.
Quoted 6 lines
You can check your specific chipset, and look at the
has_fbcfield here:drivers/gpu/drm/i915/i915_drv.cBen
Thanks.
I checked it out.
You threw FBC from i915_drv since 2.6.33, because in 2.6.32 there was not any sign of pci_id detection. And since then I got awful screen picture quality, because I start to test with Fedora 12 and then jumped to Fedora 13 with 33 kernel, and since then never had normal picture - always flickers.
I know you are all very clever here and are thinking about some Watts, but I am, like a user, thinking about my eyes first and want to tell you that you did mistake. May be FBC uses more power (I am not sure about it, as long 3D performance on i915gm is "nothing" anyway), but it looks like FBC helps to produce nice and smooth picture on laptop LSD.
My card id:
[ 0.100352] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300 [ 0.100431] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
and I would like to have ability to ENABLE FBC in rawhide or in Fedora 15. Do you know why? Because I want to use Fedora, but still can't.
P. S.
Sorry about all above, if an awful picture on my i915gm has not any relation to FBC.
Quoted 28 lines · SD
Quoted 17 lines · Ben Widawsky
From: Ben Widawsky <[email protected]>
Subject: Re: [Intel-gfx] frame buffer compression and 915GM
To: "SD" <[email protected]>
Cc: [email protected]
Date: Friday, May 27, 2011, 11:48 PMQuoted 1 line · SD
OK, thank you. I checked it, and I got unexpected
answer -
Quoted 2 lines
FBC unsupported on this chipset.
I'd need to know exactly which chipset you have. For example. Ironlake
mobile, we disabled FBC because it was actually consuming more power.Quoted 6 lines
You can check your specific chipset, and look at the
has_fbcfield here:drivers/gpu/drm/i915/i915_drv.cBen
Quoted 6 lines
Thanks.
I checked it out.
You threw FBC fromi915_drvsince 2.6.33, because in 2.6.32 there was not any sign ofpci_iddetection. And since then I got awful screen picture quality, because I start to test with Fedora 12 and then jumped to Fedora 13 with 33 kernel, and since then never had normal picture - always flickers.I know you are all very clever here and are thinking about some Watts, but I am, like a user, thinking about my eyes first and want to tell you that you did mistake. May be FBC uses more power (I am not sure about it, as long 3D performance on i915gm is "nothing" anyway), but it looks like FBC helps to produce nice and smooth picture on laptop LSD.
I don't think FBC should have any positive impact on the display, but I suppose that is a subjective thing.
You should see Jesse's commit in keithp's drm-intel-next (c1a9f047638b27e481d097910604316b8a0d132b). If you're capable of writing code, I'd suggest you do the same thing for intel_i915gm_info where fbc can be enabled, but is off by default. If not, hopefully I, or someone else will get around to it eventually.
Ben
Quoted 71 lines · Ben Widawsky
From: Ben Widawsky <[email protected]>
Subject: Re: [Intel-gfx] frame buffer compression and 915GM
To: "SD" <[email protected]>
Cc: [email protected]
Date: Sunday, May 29, 2011, 2:47 AMQuoted 3 lines · SD
--- On Fri, 5/27/11, Ben Widawsky <[email protected]>
Quoted 3 lines · wrote:
Quoted 3 lines
From: Ben Widawsky <[email protected]>
Subject: Re: [Intel-gfx] frame buffer compressionand 915GM
Quoted 6 lines
Quoted 6 lines
To: "SD" <[email protected]>
Cc: [email protected]
Date: Friday, May 27, 2011, 11:48 PMQuoted 1 line · SD
OK, thank you. I checked it, and I got
unexpected
Quoted 5 lines
Quoted 5 lines
answer -
Quoted 2 lines
FBC unsupported on this chipset.
I'd need to know exactly which chipset you have.
For
Quoted 2 lines
Quoted 2 lines
example. Ironlake
mobile, we disabled FBC because it was actuallyconsuming
Quoted 3 lines
Quoted 3 lines
more power.
You can check your specific chipset, and look at
the
Quoted 9 lines
Quoted 5 lines
has_fbcfield here:drivers/gpu/drm/i915/i915_drv.cBen
Thanks.
I checked it out.
You threw FBC fromi915_drvsince 2.6.33, because in2.6.32 there was not any sign of
pci_iddetection. And since then I got awful screen picture quality, because I start to test with Fedora 12 and then jumped to Fedora 13 with 33 kernel, and since then never had normal picture - always flickers.Quoted 2 lines
I know you are all very clever here and are thinking
about some Watts, but I am, like a user, thinking about my eyes first and want to tell you that you did mistake.
Quoted 1 line
May be FBC uses more power (I am not sure about it, as
long 3D performance on i915gm is "nothing" anyway), but it looks like FBC helps to produce nice and smooth picture on laptop LSD.
I don't think FBC should have any positive impact on the display, but I
suppose that is a subjective thing.You should see Jesse's commit in keithp's drm-intel-next (
c1a9f047638b27e481d097910604316b8a0d132b). If you're capable of writing
code, I'd suggest you do the same thing forintel_i915gm_infowhere fbc
can be enabled, but is off by default. If not, hopefully I, or someone
else will get around to it eventually.
Quoted 2 lines
Ben
Actually, I prefer if some of you can add module parameter to control FBC from the kernel command line, as it was popped up somewhere about 2.6.40 and, which is more important, was previously in xorg.conf as - Option "FramebufferCompression" "boolean" Module parameter for grub would be the best way, because as long as you can't test video output thoughtfully by yourself, let allow users to decide.
But, to be able to enable FBC, I suppose
My card id:
[ 0.100352] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300 [ 0.100431] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
those:
static const struct intel_device_info intel_i945g_info = {
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i945gm_info = {
.gen = 3, .is_i945gm = 1, .is_mobile = 1, .has_hotplug = 1, .cursor_needs_physical = 1, .has_overlay = 1, .overlay_needs_physical = 1, .supports_tv = 1,
};
should have at least: ".has_fbc = 1/0" as initial state, otherwise it always will be unsupported.
And please, do it yourself, as it is still yours responsibility. I am just unhappy user.
Sincerely.