common/mlx5: add ConnectX-10 NVLink-C2C device ID
Subsystems (2)
PATCH 1/1 common/mlx5: add ConnectX-10 NVLink-C2C device ID
This adds the ConnectX-10 NVLink-C2C device ID to the list of NVIDIA devices that run the mlx5 drivers.
The device is still in development stage.
Signed-off-by Raslan Darawsheh <[email protected]>
--- drivers/common/mlx5/mlx5_common.h | 1 + drivers/crypto/mlx5/mlx5_crypto.c | 4 ++++ drivers/net/mlx5/mlx5.c | 4 ++++ 3 files changed, 9 insertions(+)
drivers/common/mlx5/mlx5_common.h +1 -0
@@ -157,6 +157,7 @@ enum {PCI_DEVICE_ID_MELLANOX_CONNECTX9 =0x1025 ,PCI_DEVICE_ID_MELLANOX_BLUEFIELD4 =0xa2df ,PCI_DEVICE_ID_MELLANOX_CONNECTX10 =0x1027 , + PCI_DEVICE_ID_MELLANOX_CONNECTX10C2C = 0x2101, };/* Maximum number of simultaneous unicast MAC addresses. */
drivers/crypto/mlx5/mlx5_crypto.c +4 -0
@@ -499,6 +499,10 @@ static const struct rte_pci_id mlx5_crypto_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX10 ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX10C2C ) + }, { .vendor_id = 0 }
drivers/net/mlx5/mlx5.c +4 -0
@@ -3936,6 +3936,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX10 ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX10C2C ) + }, { .vendor_id = 0 }
Signature · 1 line
2.53.0
Hi,
Quoted 5 lines · Raslan Darawsheh
This adds the ConnectX-10 NVLink-C2C device ID to the list of NVIDIA devices that run the mlx5 drivers.
The device is still in development stage.Signed-off-by Raslan Darawsheh <[email protected]>
Patch applied to next-net-mlx,
Kindest regards
Raslan Darawsheh