Update lpfc to revision 14.4.0.12
Subsystems (2)
cover Update lpfc to revision 14.4.0.12
Update lpfc to revision 14.4.0.12
This patch set contains updates to log messaging, revision of outdated comment descriptions, fixes to kref accounting, support for BB credit recovery in point-to-point mode, and introduction of registering unique platform name identifiers with fabrics.
The patches were cut against Martin's 6.19/scsi-queue tree.
Justin Tee (11):
lpfc: Update various NPIV diagnostic log messaging
lpfc: Revise discovery related function headers and comments
lpfc: Remove redundant NULL ptr assignment in lpfc_els_free_iocb
lpfc: Ensure unregistration of rpis for received PLOGIs
lpfc: Fix leaked ndlp krefs when in point-to-point topology
lpfc: Modify kref handling for Fabric Controller ndlps
lpfc: Fix reusing an ndlp that is marked NLP_DROPPED during FLOGI
lpfc: Allow support for BB credit recovery in point-to-point topology
lpfc: Add capability to register Platform Name ID to fabric
lpfc: Update lpfc version to 14.4.0.12
lpfc: Copyright updates for 14.4.0.12 patches
drivers/scsi/lpfc/lpfc.h | 5 +- drivers/scsi/lpfc/lpfc_ct.c | 36 +++++ drivers/scsi/lpfc/lpfc_disc.h | 3 +- drivers/scsi/lpfc/lpfc_els.c | 249 ++++++++++++++++++++--------- drivers/scsi/lpfc/lpfc_hbadisc.c | 6 +- drivers/scsi/lpfc/lpfc_hw.h | 25 ++- drivers/scsi/lpfc/lpfc_init.c | 12 +- drivers/scsi/lpfc/lpfc_nportdisc.c | 21 +-- drivers/scsi/lpfc/lpfc_sli.c | 92 ++++++++++- drivers/scsi/lpfc/lpfc_version.h | 2 +- 10 files changed, 341 insertions(+), 110 deletions(-)
Signature · 1 line
2.38.0
PATCH 1/11 lpfc: Update various NPIV diagnostic log messaging
Update PRLI status log message to automatically warn when CQE status is non-zero.
When issuing an RSCN, log ndlp's kref count to the debugfs trace buffer.
Add the NPIV virtual port index to the FDMI registration log message with the fabric.
--- drivers/scsi/lpfc/lpfc_els.c | 6 +++--- drivers/scsi/lpfc/lpfc_init.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +3 -3
@@ -2367,7 +2367,7 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, mode =KERN_INFO ;/* Warn PRLI status */ - lpfc_printf_vlog(vport, mode, LOG_ELS, + lpfc_vlog_msg(vport, mode, LOG_ELS, "2754 PRLI DID:%06X Status:x%x/x%x, " "data: x%x x%x x%lx\n", ndlp->nlp_DID, ulp_status,
@@ -3597,8 +3597,8 @@ lpfc_issue_els_rscn(struct lpfc_vport *vport, uint8_t retry) }lpfc_debugfs_disc_trc (vport,LPFC_DISC_TRC_ELS_CMD , -"Issue RSCN: did:x%x" , - ndlp->nlp_DID,0 ,0 ); +"Issue RSCN: did:x%x refcnt %d" , + ndlp->nlp_DID,kref_read (&ndlp->kref),0 ); rc =lpfc_sli_issue_iocb (phba,LPFC_ELS_RING , elsiocb,0 );if (rc ==IOCB_ERROR ) {
drivers/scsi/lpfc/lpfc_init.c +3 -3
@@ -9082,9 +9082,9 @@ lpfc_setup_fdmi_mask(struct lpfc_vport *vport) vport->fdmi_port_mask =LPFC_FDMI2_PORT_ATTR ; } -lpfc_printf_log (phba,KERN_INFO ,LOG_DISCOVERY , -"6077 Setup FDMI mask: hba x%x port x%x\n" , - vport->fdmi_hba_mask, vport->fdmi_port_mask); +lpfc_printf_vlog (vport,KERN_INFO ,LOG_DISCOVERY , +"6077 Setup FDMI mask: hba x%x port x%x\n" , + vport->fdmi_hba_mask, vport->fdmi_port_mask); }/**
Signature · 1 line
2.38.0
PATCH 2/11 lpfc: Revise discovery related function headers and comments
In reply to Justin TeeCorrecting discovery related function headers, return status information, and comment descriptions. There are no functional changes.
--- drivers/scsi/lpfc/lpfc_els.c | 17 ++++++++--------- drivers/scsi/lpfc/lpfc_sli.c | 9 +++++---- 2 files changed, 13 insertions(+), 13 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +8 -9
@@ -3024,6 +3024,7 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, ndlp->nlp_DID, ulp_status, ulp_word4); +/* Call NLP_EVT_DEVICE_RM if link is down or LOGO is aborted */ if (lpfc_error_lost_link (vport, ulp_status, ulp_word4)) skip_recovery =1 ; }
@@ -3306,7 +3307,8 @@ lpfc_reg_fab_ctrl_node(struct lpfc_vport *vport, struct lpfc_nodelist *fc_ndlp)* * This routine is a generic completion callback function for Discovery ELS cmd. * Currently used by the ELS command issuing routines for the ELS State Change -* Request (SCR), lpfc_issue_els_scr() and the ELS RDF, lpfc_issue_els_rdf(). +* Request (SCR), lpfc_issue_els_scr(), Exchange Diagnostic Capabilities (EDC), +* lpfc_issue_els_edc() and the ELS RDF, lpfc_issue_els_rdf(). * These commands will be retried once only for ELS timeout errors. **/ static void
@@ -3705,10 +3707,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)lpfc_nlp_put (ndlp);return 1 ; } -/* This will cause the callback-function lpfc_cmpl_els_cmd to -* trigger the release of the node. -*/ -/* Don't release reference count as RDF is likely outstanding */ +return 0 ; }
@@ -4299,7 +4298,7 @@ lpfc_issue_els_edc(struct lpfc_vport *vport, uint8_t retry) rc =lpfc_sli_issue_iocb (phba,LPFC_ELS_RING , elsiocb,0 );if (rc ==IOCB_ERROR ) {/* The additional lpfc_nlp_put will cause the following -* lpfc_els_free_iocb routine to trigger the rlease of +* lpfc_els_free_iocb routine to trigger the release of * the node. */ lpfc_els_free_iocb (phba, elsiocb);
@@ -5127,7 +5126,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) {struct lpfc_dmabuf *buf_ptr, *buf_ptr1; -/* The I/O iocb is complete. Clear the node and first dmbuf */ +/* The I/O iocb is complete. Clear the node and first dmabuf */ elsiocb->ndlp =NULL ;/* cmd_dmabuf = cmd, cmd_dmabuf->next = rsp, bpl_dmabuf = bpl */
@@ -8734,7 +8733,7 @@ lpfc_els_rcv_rls(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,* @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. * -* This routine processes Read Timout Value (RTV) IOCB received as an +* This routine processes Read Timeout Value (RTV) IOCB received as an * ELS unsolicited event. It first checks the remote port state. If the * remote port is not in NLP_STE_UNMAPPED_NODE state or NLP_STE_MAPPED_NODE * state, it invokes the lpfc_els_rsl_reject() routine to send the reject
@@ -10843,7 +10842,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,lpfc_els_unsol_buffer (phba, pring, vport, elsiocb);/* * The different unsolicited event handlers would tell us -* if they are done with "mp" by setting cmd_dmabuf to NULL. +* if they are done with "mp" by setting cmd_dmabuf/bpl_dmabuf to NULL. */ if (elsiocb->cmd_dmabuf) {lpfc_in_buf_free (phba, elsiocb->cmd_dmabuf);
drivers/scsi/lpfc/lpfc_sli.c +5 -4
@@ -19858,13 +19858,15 @@ lpfc_sli4_remove_rpis(struct lpfc_hba *phba) }/** -* lpfc_sli4_resume_rpi - Remove the rpi bitmask region +* lpfc_sli4_resume_rpi - Resume traffic relative to an RPI * @ndlp: pointer to lpfc nodelist data structure. * @cmpl: completion call-back. * @iocbq: data to load as mbox ctx_u information * -* This routine is invoked to remove the memory region that -* provided rpi via a bitmask. +* Return codes +* 0 - successful +* -ENOMEM - No available memory +* -EIO - The mailbox failed to complete successfully. **/ int lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,
@@ -19894,7 +19896,6 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,return -EIO ; } -/* Post all rpi memory regions to the port. */ lpfc_resume_rpi (mboxq, ndlp);if (cmpl) { mboxq->mbox_cmpl = cmpl;
Signature · 1 line
2.38.0
PATCH 3/11 lpfc: Remove redundant NULL ptr assignment in lpfc_els_free_iocb
In reply to Justin TeeRemove redundant cmd_dmabuf and bpl_dmabuf NULL ptr assignment as they are already initialized to NULL when handling a new unsolicited event.
--- drivers/scsi/lpfc/lpfc_els.c | 2 -- 1 file changed, 2 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +0 -2
@@ -5159,14 +5159,12 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) }else { buf_ptr1 = elsiocb->cmd_dmabuf;lpfc_els_free_data (phba, buf_ptr1); - elsiocb->cmd_dmabuf =NULL ; } }if (elsiocb->bpl_dmabuf) { buf_ptr = elsiocb->bpl_dmabuf;lpfc_els_free_bpl (phba, buf_ptr); - elsiocb->bpl_dmabuf =NULL ; }lpfc_sli_release_iocbq (phba, elsiocb);return 0 ;
Signature · 1 line
2.38.0
PATCH 4/11 lpfc: Ensure unregistration of rpis for received PLOGIs
In reply to Justin TeeUnregistration of an rpi object should be done when a PLOGI is received as PLOGI receipt implies an implicit LOGO. Previously, the driver would continue using the same, already registered, rpi and ACC the received PLOGI.
Replace the ACC and early return statement with break to execute the rest of the lpfc_rcv_plogi logic outside the switch case statement. This ensures unregistration and reregistration of an rpi after PLOGI_ACC completion.
--- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_nportdisc.c | 17 ++++------------- 2 files changed, 5 insertions(+), 14 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +1 -1
@@ -3263,7 +3263,7 @@ lpfc_reg_fab_ctrl_node(struct lpfc_vport *vport, struct lpfc_nodelist *fc_ndlp)return -ENOMEM ; } rc =lpfc_reg_rpi (phba, vport->vpi, fc_ndlp->nlp_DID, - (u8 *)&vport->fc_sparam, mbox, fc_ndlp->nlp_rpi); + (u8 *)&ns_ndlp->fc_sparam, mbox, fc_ndlp->nlp_rpi);if (rc) { rc = -EACCES ; goto out;
drivers/scsi/lpfc/lpfc_nportdisc.c +4 -13
@@ -452,18 +452,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,*/ if (!(ndlp->nlp_type &NLP_FABRIC ) && !(phba->nvmet_support)) { -/* Clear ndlp info, since follow up PRLI may have -* updated ndlp information -*/ - ndlp->nlp_type &= ~(NLP_FCP_TARGET |NLP_FCP_INITIATOR ); - ndlp->nlp_type &= ~(NLP_NVME_TARGET |NLP_NVME_INITIATOR ); - ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE ; - ndlp->nlp_nvme_info &= ~NLP_NVME_NSLER ; -clear_bit (NLP_FIRSTBURST , &ndlp->nlp_flag); - -lpfc_els_rsp_acc (vport,ELS_CMD_PLOGI , cmdiocb, - ndlp,NULL ); -return 1 ; +break ; }if (nlp_portwwn !=0 && nlp_portwwn !=wwn_to_u64 (sp->portName.u.wwn))
@@ -485,7 +474,9 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,lpfc_nlp_set_state (vport, ndlp,NLP_STE_NPR_NODE );break ; } - +/* Clear ndlp info, since follow up processes may have +* updated ndlp information +*/ ndlp->nlp_type &= ~(NLP_FCP_TARGET |NLP_FCP_INITIATOR ); ndlp->nlp_type &= ~(NLP_NVME_TARGET |NLP_NVME_INITIATOR ); ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE ;
Signature · 1 line
2.38.0
PATCH 5/11 lpfc: Fix leaked ndlp krefs when in point-to-point topology
In reply to Justin TeeIn point-to-point topology, the driver sometimes defers the unsolicited FLOGI LS_ACC until it sends its FLOGI to the remote port. When this happens, lpfc neglects to release the ndlp allocated for the unsolicited FLOGI. This patch adds code to release the ndlp for the deferred unsolicited FLOGI LS_ACC.
An NLP_FLOGI_DFR_ACC flag is introduced to facilitate identifying an ndlp with an expected deferred FLOGI LS_ACC completion. When lpfc_cmpl_els_rsp detects the correct qualifiers, it releases the initial reference on the ndlp object. And when lpfc_cmpl_els_rsp exits, the remaining put for the deferred action is executed and the ndlp is released.
--- drivers/scsi/lpfc/lpfc.h | 1 - drivers/scsi/lpfc/lpfc_disc.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 65 +++++++++++++++++++++++++---------- 3 files changed, 48 insertions(+), 19 deletions(-)
drivers/scsi/lpfc/lpfc.h +0 -1
@@ -311,7 +311,6 @@ struct lpfc_defer_flogi_acc {u16 rx_id;u16 ox_id;struct lpfc_nodelist *ndlp; - };#define LPFC_VMID_TIMER 300/* timer interval in seconds */
drivers/scsi/lpfc/lpfc_disc.h +1 -0
@@ -208,6 +208,7 @@ enum lpfc_nlp_flag {NPR list */ NLP_RM_DFLT_RPI =26 ,/* need to remove leftover dflt RPI */ NLP_NODEV_REMOVE =27 ,/* Defer removal till discovery ends */ +NLP_FLOGI_DFR_ACC =28 ,/* FLOGI LS_ACC was Deferred */ NLP_SC_REQ =29 ,/* Target requires authentication */ NLP_FIRSTBURST =30 ,/* Target supports FirstBurst */ NLP_RPI_REGISTERED =31 /* nlp_rpi is valid */
drivers/scsi/lpfc/lpfc_els.c +47 -18
118 lines not on this page · raw message
Signature · 1 line
2.38.0
PATCH 6/11 lpfc: Modify kref handling for Fabric Controller ndlps
In reply to Justin TeeCurrently, there is a kref put in the lpfc_cleanup routine that takes care of outstanding references on fabric controller ndlps in UNUSED state. While typically there is a state change from UNUSED -> REGLOGIN when the ndlp successfully logs into the fabric, there may be cases when FLOGI is unsuccessful and the ndlp will remain in UNUSED state without a registered rpi, yet the ndlp incorrectly has a kref count of one.
To address this, handling of Fabric Controller ndlps are moved into the
routines: lpfc_issue_els_scr, lpfc_issue_els_rdf, lpfc_cmpl_els_disc_cmd.
In both lpfc_issue_els_scr and lpfc_issue_els_rdf, if there does not exist a previously created fabric controller ndlp, an ndlp will be created. Otherwise, we can reuse the pre-existing ndlp object.
In lpfc_cmpl_els_disc_cmd, if the SCR or RDF are not successfully issued, the initial reference on the ndlp that is not registered with upper layers will be decremented with a kref_put.
--- drivers/scsi/lpfc/lpfc_els.c | 97 ++++++++++++++++++++++++----------- drivers/scsi/lpfc/lpfc_init.c | 6 --- 2 files changed, 67 insertions(+), 36 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +67 -30
@@ -3390,11 +3390,21 @@ lpfc_cmpl_els_disc_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,lpfc_cmpl_els_edc (phba, cmdiocb, rspiocb);return ; } +if (ulp_status) {/* ELS discovery cmd completes with error */ lpfc_printf_vlog (vport,KERN_WARNING ,LOG_ELS |LOG_CGN_MGMT ,"4203 ELS cmd x%x error: x%x x%X\n" , cmd, ulp_status, ulp_word4); + +/* In the case where the ELS cmd completes with an error and +* the node does not have RPI registered, the node is +* outstanding and should put its initial reference. +*/ +if ((cmd ==ELS_CMD_SCR || cmd ==ELS_CMD_RDF ) && + !(ndlp->fc4_xpt_flags &SCSI_XPT_REGD ) && + !test_and_set_bit (NLP_DROPPED , &ndlp->nlp_flag)) +lpfc_nlp_put (ndlp); goto out; }
@@ -3463,6 +3473,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry)uint8_t *pcmd;uint16_t cmdsize;struct lpfc_nodelist *ndlp; +bool node_created = false; cmdsize = (sizeof (uint32_t ) +sizeof (SCR ));
@@ -3472,21 +3483,21 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry)if (!ndlp)return 1 ;lpfc_enqueue_node (vport, ndlp); + node_created = true; } elsiocb =lpfc_prep_els_iocb (vport,1 , cmdsize, retry, ndlp, ndlp->nlp_DID,ELS_CMD_SCR );if (!elsiocb) -return 1 ; + goto out_node_created;if (phba->sli_rev ==LPFC_SLI_REV4 ) { rc =lpfc_reg_fab_ctrl_node (vport, ndlp);if (rc) { -lpfc_els_free_iocb (phba, elsiocb);lpfc_printf_vlog (vport,KERN_ERR ,LOG_NODE ,"0937 %s: Failed to reg fc node, rc %d\n" , __func__, rc); -return 1 ; + goto out_free_iocb; } } pcmd = (uint8_t *)elsiocb->cmd_dmabuf->virt;
@@ -3505,23 +3516,27 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry) phba->fc_stat.elsXmitSCR++; elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd; elsiocb->ndlp =lpfc_nlp_get (ndlp); -if (!elsiocb->ndlp) { -lpfc_els_free_iocb (phba, elsiocb); -return 1 ; - } +if (!elsiocb->ndlp) + goto out_free_iocb;lpfc_debugfs_disc_trc (vport,LPFC_DISC_TRC_ELS_CMD ,"Issue SCR: did:x%x refcnt %d" , ndlp->nlp_DID,kref_read (&ndlp->kref),0 ); rc =lpfc_sli_issue_iocb (phba,LPFC_ELS_RING , elsiocb,0 ); -if (rc ==IOCB_ERROR ) { -lpfc_els_free_iocb (phba, elsiocb); -lpfc_nlp_put (ndlp); -return 1 ; - } +if (rc ==IOCB_ERROR ) + goto out_iocb_error;return 0 ; + +out_iocb_error: +lpfc_nlp_put (ndlp); +out_free_iocb: +lpfc_els_free_iocb (phba, elsiocb); +out_node_created: +if (node_created) +lpfc_nlp_put (ndlp); +return 1 ; }/**
@@ -3734,7 +3749,12 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)* * Return code * 0 - Successfully issued rdf command -* 1 - Failed to issue rdf command +* < 0 - Failed to issue rdf command +* -EACCES - RDF not required for NPIV_PORT +* -ENODEV - No fabric controller device available +* -ENOMEM - No available memory +* -EIO - The mailbox failed to complete successfully. +* **/ int lpfc_issue_els_rdf (struct lpfc_vport *vport,uint8_t retry)
@@ -3745,25 +3765,30 @@ lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry)struct lpfc_nodelist *ndlp;uint16_t cmdsize;int rc; +bool node_created = false; +int err; cmdsize =sizeof (*prdf); +/* RDF ELS is not required on an NPIV VN_Port. */ +if (vport->port_type ==LPFC_NPIV_PORT ) +return -EACCES ; + ndlp =lpfc_findnode_did (vport, Fabric_Cntl_DID);if (!ndlp) { ndlp =lpfc_nlp_init (vport, Fabric_Cntl_DID);if (!ndlp)return -ENODEV ;lpfc_enqueue_node (vport, ndlp); + node_created = true; } -/* RDF ELS is not required on an NPIV VN_Port. */ -if (vport->port_type ==LPFC_NPIV_PORT ) -return -EACCES ; - elsiocb =lpfc_prep_els_iocb (vport,1 , cmdsize, retry, ndlp, ndlp->nlp_DID,ELS_CMD_RDF ); -if (!elsiocb) -return -ENOMEM ; +if (!elsiocb) { + err = -ENOMEM ; + goto out_node_created; + }/* Configure the payload for the supported FPIN events. */ prdf = (struct lpfc_els_rdf_req *)elsiocb->cmd_dmabuf->virt;
@@ -3789,8 +3814,8 @@ lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry) elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd; elsiocb->ndlp =lpfc_nlp_get (ndlp);if (!elsiocb->ndlp) { -lpfc_els_free_iocb (phba, elsiocb); -return -EIO ; + err = -EIO ; + goto out_free_iocb; } lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
@@ -3799,11 +3824,19 @@ lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry) rc =lpfc_sli_issue_iocb (phba,LPFC_ELS_RING , elsiocb,0 );if (rc ==IOCB_ERROR ) { -lpfc_els_free_iocb (phba, elsiocb); -lpfc_nlp_put (ndlp); -return -EIO ; + err = -EIO ; + goto out_iocb_error; }return 0 ; + +out_iocb_error: +lpfc_nlp_put (ndlp); +out_free_iocb: +lpfc_els_free_iocb (phba, elsiocb); +out_node_created: +if (node_created) +lpfc_nlp_put (ndlp); +return err; }/**
@@ -3824,19 +3857,23 @@ static int lpfc_els_rcv_rdf(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) { + int rc; + + rc =lpfc_els_rsp_acc (vport,ELS_CMD_RDF , cmdiocb, ndlp,NULL );/* Send LS_ACC */ - if (lpfc_els_rsp_acc(vport, ELS_CMD_RDF, cmdiocb, ndlp, NULL)) { +if (rc) {lpfc_printf_vlog (vport,KERN_INFO ,LOG_ELS |LOG_CGN_MGMT , -"1623 Failed to RDF_ACC from x%x for x%x\n" , - ndlp->nlp_DID, vport->fc_myDID); +"1623 Failed to RDF_ACC from x%x for x%x Data: %d\n" , + ndlp->nlp_DID, vport->fc_myDID, rc);return -EIO ; } + rc =lpfc_issue_els_rdf (vport,0 );/* Issue new RDF for reregistering */ -if (lpfc_issue_els_rdf (vport,0 )) { +if (rc) {lpfc_printf_vlog (vport,KERN_INFO ,LOG_ELS |LOG_CGN_MGMT , -"2623 Failed to re register RDF for x%x\n" , - vport->fc_myDID); +"2623 Failed to re register RDF for x%x Data: %d\n" , + vport->fc_myDID, rc);return -EIO ; }
drivers/scsi/lpfc/lpfc_init.c +0 -6
@@ -3057,12 +3057,6 @@ lpfc_cleanup(struct lpfc_vport *vport)lpfc_vmid_vport_cleanup (vport);list_for_each_entry_safe (ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { -if (ndlp->nlp_DID == Fabric_Cntl_DID && - ndlp->nlp_state ==NLP_STE_UNUSED_NODE ) { -lpfc_nlp_put (ndlp); -continue ; - } -/* Fabric Ports not in UNMAPPED state are cleaned up in the * DEVICE_RM event. */
Signature · 1 line
2.38.0
PATCH 7/11 lpfc: Fix reusing an ndlp that is marked NLP_DROPPED during FLOGI
In reply to Justin TeeIt's possible for an unstable link to repeatedly bounce allowing a FLOGI retry, but then bounce again forcing an abort of the FLOGI. Ensure that the initial reference count on the FLOGI ndlp is restored in this faulty link scenario.
--- drivers/scsi/lpfc/lpfc_els.c | 36 +++++++++++++++++++++++++------- drivers/scsi/lpfc/lpfc_hbadisc.c | 4 +++- 2 files changed, 32 insertions(+), 8 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +29 -7
@@ -934,10 +934,15 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,/* Check to see if link went down during discovery */ if (lpfc_els_chk_latt (vport)) {/* One additional decrement on node reference count to -* trigger the release of the node +* trigger the release of the node. Make sure the ndlp +* is marked NLP_DROPPED. */ -if (!(ndlp->fc4_xpt_flags &SCSI_XPT_REGD )) +if (!test_bit (NLP_IN_DEV_LOSS , &ndlp->nlp_flag) && + !test_bit (NLP_DROPPED , &ndlp->nlp_flag) && + !(ndlp->fc4_xpt_flags &SCSI_XPT_REGD )) { +set_bit (NLP_DROPPED , &ndlp->nlp_flag);lpfc_nlp_put (ndlp); + } goto out; }
@@ -995,9 +1000,10 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOERR_LOOP_OPEN_FAILURE))) lpfc_vlog_msg(vport, KERN_WARNING, LOG_ELS,"2858 FLOGI Status:x%x/x%x TMO" -":x%x Data x%lx x%x\n" , +":x%x Data x%lx x%x x%lx x%x\n" , ulp_status, ulp_word4, tmo, - phba->hba_flag, phba->fcf.fcf_flag); + phba->hba_flag, phba->fcf.fcf_flag, + ndlp->nlp_flag, ndlp->fc4_xpt_flags);/* Check for retry */ if (lpfc_els_retry (phba, cmdiocb, rspiocb)) {
@@ -1015,14 +1021,17 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,* reference to trigger node release. */ if (!test_bit (NLP_IN_DEV_LOSS , &ndlp->nlp_flag) && - !(ndlp->fc4_xpt_flags &SCSI_XPT_REGD )) + !test_bit (NLP_DROPPED , &ndlp->nlp_flag) && + !(ndlp->fc4_xpt_flags &SCSI_XPT_REGD )) { +set_bit (NLP_DROPPED , &ndlp->nlp_flag);lpfc_nlp_put (ndlp); + }lpfc_printf_vlog (vport,KERN_WARNING ,LOG_ELS ,"0150 FLOGI Status:x%x/x%x " -"xri x%x TMO:x%x refcnt %d\n" , +"xri x%x iotag x%x TMO:x%x refcnt %d\n" , ulp_status, ulp_word4, cmdiocb->sli4_xritag, - tmo,kref_read (&ndlp->kref)); + cmdiocb->iotag, tmo,kref_read (&ndlp->kref));/* If this is not a loop open failure, bail out */ if (!(ulp_status == IOSTAT_LOCAL_REJECT &&
@@ -1279,6 +1288,19 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,uint32_t tmo, did;int rc; +/* It's possible for lpfc to reissue a FLOGI on an ndlp that is marked +* NLP_DROPPED. This happens when the FLOGI completed with the XB bit +* set causing lpfc to reference the ndlp until the XRI_ABORTED CQE is +* issued. The time window for the XRI_ABORTED CQE can be as much as +* 2*2*RA_TOV allowing for ndlp reuse of this type when the link is +* cycling quickly. When true, restore the initial reference and remove +* the NLP_DROPPED flag as lpfc is retrying. +*/ +if (test_and_clear_bit (NLP_DROPPED , &ndlp->nlp_flag)) { +if (!lpfc_nlp_get (ndlp)) +return 1 ; + } + cmdsize = (sizeof (uint32_t ) +sizeof (struct serv_parm )); elsiocb =lpfc_prep_els_iocb (vport,1 , cmdsize, retry, ndlp, ndlp->nlp_DID,ELS_CMD_FLOGI );
drivers/scsi/lpfc/lpfc_hbadisc.c +3 -1
@@ -424,6 +424,7 @@ lpfc_check_nlp_post_devloss(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) {if (test_and_clear_bit (NLP_IN_RECOV_POST_DEV_LOSS , &ndlp->save_flags)) { +clear_bit (NLP_DROPPED , &ndlp->nlp_flag);lpfc_nlp_get (ndlp);lpfc_printf_vlog (vport,KERN_INFO ,LOG_DISCOVERY |LOG_NODE , "8438 Devloss timeout reversed on DID x%x "
@@ -566,7 +567,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)return fcf_inuse; } -lpfc_nlp_put (ndlp); +if (!test_and_set_bit (NLP_DROPPED , &ndlp->nlp_flag)) +lpfc_nlp_put (ndlp);return fcf_inuse; }
Signature · 1 line
2.38.0
PATCH 8/11 lpfc: Allow support for BB credit recovery in point-to-point topology
In reply to Justin TeeCurrently, BB credit recovery is excluded to fabric topology mode. This patch allows setting of BB_SC_N in PLOGIs and PLOGI_ACCs when in point-to-point mode so that BB credit recovery can operate in point-to-point topology as well.
--- drivers/scsi/lpfc/lpfc_els.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +4 -2
@@ -2279,7 +2279,8 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) sp->cmn.valid_vendor_ver_level =0 ;memset (sp->un.vendorVersion,0 ,sizeof (sp->un.vendorVersion)); - sp->cmn.bbRcvSizeMsb &=0xF ; +if (!test_bit (FC_PT2PT , &vport->fc_flag)) + sp->cmn.bbRcvSizeMsb &=0xF ;/* Check if the destination port supports VMID */ ndlp->vmid_support =0 ;
@@ -5670,7 +5671,8 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, sp->cmn.valid_vendor_ver_level =0 ;memset (sp->un.vendorVersion,0 ,sizeof (sp->un.vendorVersion)); - sp->cmn.bbRcvSizeMsb &=0xF ; +if (!test_bit (FC_PT2PT , &vport->fc_flag)) + sp->cmn.bbRcvSizeMsb &=0xF ;/* If our firmware supports this feature, convey that * info to the target using the vendor specific field.
Signature · 1 line
2.38.0
PATCH 9/11 lpfc: Add capability to register Platform Name ID to fabric
In reply to Justin TeeFC-LS and FC-GS specifications outline fields for registering a platform name identifier (PNI) to the fabric. The PNI assists fabrics with identifying the physical server source of frames in the fabric.
lpfc generates a PNI based partially on the uuid specific for the system. Initial attempts to extract a uuid are made from SMBIOS's System Information 08h uuid entry. If SMBIOS DMI does not exist, then Open Firmware Device-Tree's virtual partition uuid property is used. Otherwise, a PNI is not generated and PNI registration with the fabric is skipped.
The PNI is submitted in FLOGI and FDISC frames. After successful fabric login, the RSPNI_PNI CT frame is submitted to the fabric to register the OS host name tying it to the PNI.
--- drivers/scsi/lpfc/lpfc.h | 4 ++ drivers/scsi/lpfc/lpfc_ct.c | 36 +++++++++++++ drivers/scsi/lpfc/lpfc_els.c | 18 +++++-- drivers/scsi/lpfc/lpfc_hbadisc.c | 2 + drivers/scsi/lpfc/lpfc_hw.h | 25 ++++++++- drivers/scsi/lpfc/lpfc_nportdisc.c | 4 -- drivers/scsi/lpfc/lpfc_sli.c | 83 ++++++++++++++++++++++++++++++ 7 files changed, 164 insertions(+), 8 deletions(-)
drivers/scsi/lpfc/lpfc.h +4 -0
@@ -633,6 +633,7 @@ struct lpfc_vport {#define FC_CT_RSPN_ID 0x8/* RSPN_ID accepted by switch */ #define FC_CT_RFT_ID 0x10/* RFT_ID accepted by switch */ #define FC_CT_RPRT_DEFER 0x20/* Defer issuing FDMI RPRT */ +#define FC_CT_RSPNI_PNI 0x40/* RSPNI_PNI accepted by switch */ struct list_head fc_nodes;spinlock_t fc_nodes_list_lock;/* spinlock for fc_nodes list */
@@ -1077,6 +1078,9 @@ struct lpfc_hba {uint32_t nport_event_cnt;/* timestamp for nlplist entry */ +unsigned long pni;/* 64-bit Platform Name Identifier */ +#define PATH_UUID_IBM "ibm,partition-uuid" +uint8_t wwnn[8 ];uint8_t wwpn[8 ];uint32_t RandomData[7 ];
drivers/scsi/lpfc/lpfc_ct.c +36 -0
@@ -1742,6 +1742,28 @@ lpfc_cmpl_ct_cmd_rsnn_nn(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,return ; } +static void +lpfc_cmpl_ct_cmd_rspni_pni (struct lpfc_hba *phba,struct lpfc_iocbq *cmdiocb, +struct lpfc_iocbq *rspiocb) +{ +struct lpfc_vport *vport; +struct lpfc_dmabuf *outp; +struct lpfc_sli_ct_request *ctrsp; +u32 ulp_status; + + vport = cmdiocb->vport; + ulp_status =get_job_ulpstatus (phba, rspiocb); + +if (ulp_status ==IOSTAT_SUCCESS ) { + outp = cmdiocb->rsp_dmabuf; + ctrsp = (struct lpfc_sli_ct_request *)outp->virt; +if (be16_to_cpu (ctrsp->CommandResponse.bits.CmdRsp) == +SLI_CT_RESPONSE_FS_ACC ) + vport->ct_flags |=FC_CT_RSPNI_PNI ; + } +lpfc_cmpl_ct (phba, cmdiocb, rspiocb); +} +static void lpfc_cmpl_ct_cmd_da_id (struct lpfc_hba *phba,struct lpfc_iocbq *cmdiocb,struct lpfc_iocbq *rspiocb)
@@ -1956,6 +1978,8 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, bpl->tus.f.bdeSize =RSPN_REQUEST_SZ ; else if (cmdcode == SLI_CTNS_RSNN_NN) bpl->tus.f.bdeSize = RSNN_REQUEST_SZ; + else if (cmdcode == SLI_CTNS_RSPNI_PNI) + bpl->tus.f.bdeSize = RSPNI_REQUEST_SZ; else if (cmdcode == SLI_CTNS_DA_ID) bpl->tus.f.bdeSize = DA_ID_REQUEST_SZ; else if (cmdcode == SLI_CTNS_RFF_ID)
@@ -2077,6 +2101,18 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, CtReq->un.rsnn.symbname, size); cmpl = lpfc_cmpl_ct_cmd_rsnn_nn;break ; +case SLI_CTNS_RSPNI_PNI : + vport->ct_flags &= ~FC_CT_RSPNI_PNI ; + CtReq->CommandResponse.bits.CmdRsp = +cpu_to_be16 (SLI_CTNS_RSPNI_PNI ); + CtReq->un.rspni.pni =cpu_to_be64 (phba->pni); +scnprintf (CtReq->un.rspni.symbname, +sizeof (CtReq->un.rspni.symbname),"OS Host Name::%s" , + phba->os_host_name); + CtReq->un.rspni.len =strnlen (CtReq->un.rspni.symbname, +sizeof (CtReq->un.rspni.symbname)); + cmpl = lpfc_cmpl_ct_cmd_rspni_pni; +break ;case SLI_CTNS_DA_ID :/* Implement DA_ID Nameserver request */ CtReq->CommandResponse.bits.CmdRsp =
drivers/scsi/lpfc/lpfc_els.c +15 -3
@@ -650,8 +650,6 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_class_sup |=FC_COS_CLASS2 ;if (sp->cls3.classValid) ndlp->nlp_class_sup |=FC_COS_CLASS3 ; -if (sp->cls4.classValid) - ndlp->nlp_class_sup |=FC_COS_CLASS4 ; ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb &0x0F ) <<8 ) | sp->cmn.bbRcvSizeLsb;
@@ -1356,6 +1354,14 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,/* Can't do SLI4 class2 without support sequence coalescing */ sp->cls2.classValid =0 ; sp->cls2.seqDelivery =0 ; + +/* Fill out Auxiliary Parameter Data */ +if (phba->pni) { + sp->aux.flags = +AUX_PARM_DATA_VALID |AUX_PARM_PNI_VALID ; + sp->aux.pni =cpu_to_be64 (phba->pni); + sp->aux.npiv_cnt =cpu_to_be16 (phba->max_vpi -1 ); + } }else {/* Historical, setting sequential-delivery bit for SLI3 */ sp->cls2.seqDelivery = (sp->cls2.classValid) ?1 :0 ;
@@ -5657,7 +5663,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, sp->cls1.classValid =0 ; sp->cls2.classValid =0 ; sp->cls3.classValid =0 ; - sp->cls4.classValid =0 ;/* Copy our worldwide names */ memcpy(&sp->portName, &vport->fc_sparam.portName,
@@ -11510,6 +11515,13 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, sp->cls2.seqDelivery =1 ; sp->cls3.seqDelivery =1 ; +/* Fill out Auxiliary Parameter Data */ +if (phba->pni) { + sp->aux.flags = +AUX_PARM_DATA_VALID |AUX_PARM_PNI_VALID ; + sp->aux.pni =cpu_to_be64 (phba->pni); + } + pcmd +=sizeof (uint32_t );/* CSP Word 2 */ pcmd +=sizeof (uint32_t );/* CSP Word 3 */ pcmd +=sizeof (uint32_t );/* CSP Word 4 */
drivers/scsi/lpfc/lpfc_hbadisc.c +2 -0
@@ -4373,6 +4373,8 @@ lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)lpfc_ns_cmd (vport,SLI_CTNS_RNN_ID ,0 ,0 );lpfc_ns_cmd (vport,SLI_CTNS_RSNN_NN ,0 ,0 );lpfc_ns_cmd (vport,SLI_CTNS_RSPN_ID ,0 ,0 ); +if (phba->pni) +lpfc_ns_cmd (vport,SLI_CTNS_RSPNI_PNI ,0 ,0 );lpfc_ns_cmd (vport,SLI_CTNS_RFT_ID ,0 ,0 ); if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
drivers/scsi/lpfc/lpfc_hw.h +24 -1
@@ -168,6 +168,11 @@ struct lpfc_sli_ct_request {uint8_t len;uint8_t symbname[255 ]; } rspn; +struct rspni {/* For RSPNI_PNI requests */ +__be64 pni; +u8 len; +u8 symbname[255 ]; + } rspni;struct gff {uint32_t PortId; } gff;
@@ -213,6 +218,8 @@ struct lpfc_sli_ct_request { sizeof(struct da_id))#define RSPN_REQUEST_SZ (offsetof(struct lpfc_sli_ct_request, un) + \ sizeof(struct rspn)) +#define RSPNI_REQUEST_SZ (offsetof(struct lpfc_sli_ct_request, un) + \ + sizeof(struct rspni))/* * FsType Definitions
@@ -309,6 +316,7 @@ struct lpfc_sli_ct_request {#define SLI_CTNS_RIP_NN 0x0235#define SLI_CTNS_RIPA_NN 0x0236#define SLI_CTNS_RSNN_NN 0x0239 +#define SLI_CTNS_RSPNI_PNI 0x0240#define SLI_CTNS_DA_ID 0x0300/*
@@ -512,6 +520,21 @@ struct class_parms {uint8_t word3Reserved2;/* Fc Word 3, bit 0: 7 */ }; +enum aux_parm_flags { +AUX_PARM_PNI_VALID =0x20 ,/* FC Word 0, bit 29 */ +AUX_PARM_DATA_VALID =0x40 ,/* FC Word 0, bit 30 */ +}; + +struct aux_parm { +u8 flags;/* FC Word 0, bit 31:24 */ +u8 ext_feat[3 ];/* FC Word 0, bit 23:0 */ + +__be64 pni;/* FC Word 1 and 2, platform name identifier */ + +__be16 rsvd;/* FC Word 3, bit 31:16 */ +__be16 npiv_cnt;/* FC Word 3, bit 15:0 */ +} __packed; +struct serv_parm {/* Structure is in Big Endian format */ struct csp cmn;struct lpfc_name portName;
@@ -519,7 +542,7 @@ struct serv_parm { /* Structure is in Big Endian format */struct class_parms cls1;struct class_parms cls2;struct class_parms cls3; -struct class_parms cls4; +struct aux_parm aux; union { uint8_t vendorVersion[16]; struct {
drivers/scsi/lpfc/lpfc_nportdisc.c +0 -4
@@ -432,8 +432,6 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_class_sup |=FC_COS_CLASS2 ;if (sp->cls3.classValid) ndlp->nlp_class_sup |=FC_COS_CLASS3 ; -if (sp->cls4.classValid) - ndlp->nlp_class_sup |=FC_COS_CLASS4 ; ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb &0x0F ) <<8 ) | sp->cmn.bbRcvSizeLsb;/* if already logged in, do implicit logout */
@@ -1417,8 +1415,6 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport, ndlp->nlp_class_sup |=FC_COS_CLASS2 ;if (sp->cls3.classValid) ndlp->nlp_class_sup |=FC_COS_CLASS3 ; -if (sp->cls4.classValid) - ndlp->nlp_class_sup |=FC_COS_CLASS4 ; ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb &0x0F ) <<8 ) | sp->cmn.bbRcvSizeLsb;
drivers/scsi/lpfc/lpfc_sli.c +83 -0
101 lines not on this page · raw message
Signature · 1 line
2.38.0
Re: [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric
Quoted 10 lines · Justin Tee
FC-LS and FC-GS specifications outline fields for registering a platform name identifier (PNI) to the fabric. The PNI assists fabrics with identifying the physical server source of frames in the fabric.
lpfc generates a PNI based partially on the uuid specific for the system. Initial attempts to extract a uuid are made from SMBIOS's System Information 08h uuid entry. If SMBIOS DMI does not exist, then Open Firmware Device-Tree's virtual partition uuid property is used. Otherwise, a PNI is not generated and PNI registration with the fabric is skipped.
Quoted 5 lines
The PNI is submitted in FLOGI and FDISC frames. After successful fabric login, the
RSPNI_PNICT frame is submitted to the fabric to register the OS host name tying it to the PNI.Signed-off-by Justin Tee <[email protected]>
Still does not match From address.
Quoted 23 lines
--- drivers/scsi/lpfc/lpfc.h | 4 ++ drivers/scsi/lpfc/lpfc_ct.c | 36 +++++++++++++ drivers/scsi/lpfc/lpfc_els.c | 18 +++++-- drivers/scsi/lpfc/lpfc_hbadisc.c | 2 + drivers/scsi/lpfc/lpfc_hw.h | 25 ++++++++- drivers/scsi/lpfc/lpfc_nportdisc.c | 4 -- drivers/scsi/lpfc/lpfc_sli.c | 83 ++++++++++++++++++++++++++++++ 7 files changed, 164 insertions(+), 8 deletions(-)drivers/scsi/lpfc/lpfc.h +1
-0@@ -633,6 +633,7 @@ struct lpfc_vport {#define FC_CT_RSPN_ID 0x8/* RSPN_ID accepted by switch */ #define FC_CT_RFT_ID 0x10/* RFT_ID accepted by switch */ #define FC_CT_RPRT_DEFER 0x20/* Defer issuing FDMI RPRT */ +#define FC_CT_RSPNI_PNI 0x40/* RSPNI_PNI accepted by switch */ struct list_head fc_nodes;spinlock_t fc_nodes_list_lock;/* spinlock for fc_nodes list */
drivers/scsi/lpfc/lpfc.h struct lpfc_hba { · line 1082
Quoted 5 lines
drivers/scsi/lpfc/lpfc.h +2
-0@@ -1077,6 +1078,9 @@ struct lpfc_hba {uint32_t nport_event_cnt;/* timestamp for nlplist entry */ +unsigned long pni;/* 64-bit Platform Name Identifier */ +#define PATH_UUID_IBM "ibm,partition-uuid"
Where did you document the ABI?
Best regards,
Krzysztof
Re: [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric
Quoted 3 lines
Quoted 1 line
+#define
PATH_UUID_IBM"ibm,partition-uuid"Where did you document the ABI?
So, if of_get_property does not find anything, then our driver will simply not register a UUID with the fabric. We’re aiming for best-effort on platforms that don’t implement SMBIOS, is this handling acceptable?
Regards,
Justin
Re: [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric
Quoted 7 lines · Justin Tee
Quoted 3 lines
Quoted 1 line
+#define
PATH_UUID_IBM"ibm,partition-uuid"Where did you document the ABI?
So, if
of_get_propertydoes not find anything, then our driver will simply not register a UUID with the fabric. We’re aiming for best-effort on platforms that don’t implement SMBIOS, is this handling acceptable?
That's not really answer to my question. I asked where is ABI documented and you answer how driver behaves. Not related.
Best regards,
Krzysztof
Re: [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric
Quoted 2 lines
That's not really answer to my question. I asked where is ABI documented and you answer how driver behaves. Not related.
So, referencing lshw, the device tree ibm,partition-uuid property is used when reporting UUID on IBM Power systems
https://github.com/lyonel/lshw/commit/9c5c2f0706db330114ff4624e0931ac40c1d6fe2
Additionally, referencing how libnvme generates UUIDs, the same property seems to have been chosen by IBM as the basis for NQN generation as well
https://github.com/linux-nvme/libnvme/commit/62bac64627b7ee99c49f30a399240acf04c95d92
Regards,
Justin
Re: [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric
Quoted 6 lines · Justin Tee
Quoted 2 lines
That's not really answer to my question. I asked where is ABI documented and you answer how driver behaves. Not related.
So, referencing lshw, the device tree ibm,partition-uuid property is used when reporting UUID on IBM Power systems
https://github.com/lyonel/lshw/commit/9c5c2f0706db330114ff4624e0931ac40c1d6fe2
lshw is a program, not an ABI documentation. ePAPR is documentation, bindings are.
Quoted 5 lines
Additionally, referencing how libnvme generates UUIDs, the same property seems to have been chosen by IBM as the basis for NQN generation as well
https://github.com/linux-nvme/libnvme/commit/62bac64627b7ee99c49f30a399240acf04c95d92
So you never defined an interface but you use it? Sound like that. And what stops us from changing this property here to anything else? Like I wanted different name? Do you understand what ABI is?
Best regards,
Krzysztof
Re: [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric
Hi Brian,
Was wondering if it was possible to help point to any documentation that the “/proc/device-tree/ibm,partition-uuid” property would always be available on IBM PowerPC platforms?
Essentially, does there exist ABI documentation that this property can reliably be used for lshw, libnvme, and the lpfc driver?
Regards,
Justin
PATCH 10/11 lpfc: Update lpfc version to 14.4.0.12
In reply to Justin TeeUpdate lpfc version to 14.4.0.12
--- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_version.h +1 -1
@@ -20,7 +20,7 @@* included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "14.4.0.11" +#define LPFC_DRIVER_VERSION "14.4.0.12"#define LPFC_DRIVER_NAME "lpfc"/* Used for SLI 2/3 */
Signature · 1 line
2.38.0
Re: [PATCH 10/11] lpfc: Update lpfc version to 14.4.0.12
Quoted 12 lines · Justin Tee
Update lpfc version to 14.4.0.12
Signed-off-by Justin Tee <[email protected]>--- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/scsi/lpfc/lpfc_version.h +0
-0
drivers/scsi/lpfc/lpfc_version.h line 23
Quoted 5 lines
drivers/scsi/lpfc/lpfc_version.h +1
-1@@ -20,7 +20,7 @@* included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "14.4.0.11" +#define LPFC_DRIVER_VERSION "14.4.0.12"
This makes little sense on its own. Please organize patches in logical chunks. Not mentioning that this is useless information - you are duplicating kernel version.
Best regards,
Krzysztof
Re: [PATCH 10/11] lpfc: Update lpfc version to 14.4.0.12
Hi Krzysztof,
Quoted 3 lines
This makes little sense on its own. Please organize patches in logical chunks. Not mentioning that this is useless information - you are duplicating kernel version.
Understood from the viewpoint of the kernel version. We’ve had previous discussions about this with James Bottomley and Martin, and they’ve been gracious enough to allow us to tag our patchset updates with driver version updates. The purpose for the lpfc driver version updates is to assist in tracking our patchsets into the various Linux distributions.
Regards,
Justin
PATCH 11/11 lpfc: Copyright updates for 14.4.0.12 patches
In reply to Justin TeeUpdate copyrights to 2025 for files modified in the 14.4.0.12 patch set.
--- drivers/scsi/lpfc/lpfc_disc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_disc.h +1 -1
@@ -1,7 +1,7 @@/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * -* Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term * +* Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2013 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. *
Signature · 1 line
2.38.0
Re: [PATCH 11/11] lpfc: Copyright updates for 14.4.0.12 patches
Quoted 1 line · Justin Tee
Update copyrights to 2025 for files modified in the 14.4.0.12 patch set.
This makes no sense on its own. We do not care about copyrights and such patch has zero meaning to us. Plus it should be result of copyright work, IOW, must be squashed if at all.
Quoted 2 lines
Signed-off-by Justin Tee <[email protected]>
Does not match from address.
Quoted 9 lines
--- drivers/scsi/lpfc/lpfc_disc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/scsi/lpfc/lpfc_disc.h +0
-0
drivers/scsi/lpfc/lpfc_disc.h line 7
Quoted 8 lines
drivers/scsi/lpfc/lpfc_disc.h +1
-1@@ -1,7 +1,7 @@/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * -* Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term * +* Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2013 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. *
Best regards,
Krzysztof
Re: [PATCH 11/11] lpfc: Copyright updates for 14.4.0.12 patches
Quoted 3 lines
This makes no sense on its own. We do not care about copyrights and such patch has zero meaning to us. Plus it should be result of copyright work, IOW, must be squashed if at all.
A separate copyright update patch for file modifications in patchsets is what was historically requested by certain Linux distributions in the past. But, I can certainly repost with this squashed into the patch that updated lpfc_dish.h itself.
Quoted 3 lines
Quoted 1 line
Signed-off-by Justin Tee <[email protected]>Does not match from address.
Sure, will revise in an updated patchset.
Regards,
Justin