Skip to contentSkip to conversation

trouble getting systemd oneshot to run

DISCUSSION Greg Wilson-Lindberg 3 participants 6 messages Mar 14, 2018 – Mar 15, 2018

lore
Share & tools
lore
#0 lore raw

I'm building yocto for a raspberry pi3 from Qt's b2qt version.

I'm running into two problems, I've got all of the files copying to the correct locations but the .service is not running at startup. I used connman-conf.bb as the template for my .bb file:

SUMMARY="recipe to create CAN bus startup service"

LICENSE = "CLOSED"
LIC_FILES_CHKSUM = ""

inherit systemd

SRC_URI = "file://can_start.sh \
           file://canstart.service \

"

S = "${WORKDIR}"

PACKAGE_ARCH = "${MACHINE_ARCH}"

FILES_${PN} = "${datadir}/*"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi
}

SYSTEMD_SERVICE_${PN} = "canstart.service"

Service file:

[Unit]
Description=Startup CAN bus interface

[Service]
Type=oneshot
ExecStart=@SCRIPTDIR@/can_start.sh

[Install]
WantedBy=network.target

From looking at the connman-conf sample I'm setting everything up correctly and the service should default to running on startup but it is not.

The second 'problem' is really just perplexing, if I dump the variables S contains a path to a directory in my root not "${WORKDIR}".

Any and all help with this would be greatly appreciated.

Regards,

Greg Wilson-Lindberg

#1 lore raw

I am no expert, but I have a similar recipe. It might be over complicated, but I put the script in one package and the service in another something like:

PACKAGES += "${PN}-service"
FILES_${PN} = "${datadir}/canstart/canstart.sh " FILES_${PN}-service = "${systemd_unitdir}/system/canstart.service " SYSTEMD_PACKAGES = ${PN}-service" SYSTEMD_SERVICE_${PN}-service = canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Of course, this requires image to install both canstart and canstart-service.

Hope this helps,
Jeremy Thien

Quoted 67 lines · Greg Wilson-Lindberg

I'm building yocto for a raspberry pi3 from Qt's b2qt version.

I'm running into two problems, I've got all of the files copying to the correct locations but the .service is not running at startup. I used connman-conf.bb as the template for my .bb file:

SUMMARY="recipe to create CAN bus startup service"

LICENSE = "CLOSED"
LIC_FILES_CHKSUM = ""

inherit systemd

SRC_URI = "file://can_start.sh \ file://canstart.service \"

S = "${WORKDIR}"

PACKAGE_ARCH = "${MACHINE_ARCH}"

FILES_${PN} = "${datadir}/*"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi}

SYSTEMD_SERVICE_${PN} = "canstart.service"

Service file:

[Unit]
Description=Startup CAN bus interface

[Service]
Type=oneshot
ExecStart=@SCRIPTDIR@/can_start.sh

[Install]
WantedBy=network.target

From looking at the connman-conf sample I'm setting everything up correctly and the service should default to running on startup but it is not.

The second 'problem' is really just perplexing, if I dump the variables S contains a path to a directory in my root not "${WORKDIR}".

Any and all help with this would be greatly appreciated.

Regards,

Greg Wilson-Lindberg
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 3 lines
Jeremy Thien
Director of Engineering | Adtec Digital
[email protected] | mobile: +1 (904) 910-1749
#2 lore raw

I changed it to look like:

PACKAGES += "${PN}-service"

FILES_${PN} = "${datadir}/*"
FILES_${PN}-service = "${systemd_system_unitdir}/canstart.service"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi
}

SYSTEMD_PACKAGES = "${PN}-service" SYSTEMD_SERVICE_${PN}-service = "canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Still got the same results, my task is not running at startup.
To make sure that there wasn't some problem in running the script, I changed the ExecStart to echo to a file in /tmp. Nothing there. The .service file is not being executed. I've obviously got something totally messed up, but I'm darned if I understand what it is.

________________________________
From: Jeremy Thien <[email protected]>
Sent: Wednesday, March 14, 2018 1:08 PM
To: Greg Wilson-Lindberg
Cc: [email protected]
Subject: Re: [yocto] trouble getting systemd oneshot to run

I am no expert, but I have a similar recipe. It might be over complicated, but I put the script in one package and the service in another something like:

PACKAGES += "${PN}-service"
FILES_${PN} = "${datadir}/canstart/canstart.sh " FILES_${PN}-service = "${systemd_unitdir}/system/canstart.service " SYSTEMD_PACKAGES = ${PN}-service" SYSTEMD_SERVICE_${PN}-service = canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Of course, this requires image to install both canstart and canstart-service.

Hope this helps,
Jeremy Thien

On Wed, Mar 14, 2018 at 3:21 PM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:

I'm building yocto for a raspberry pi3 from Qt's b2qt version.

I'm running into two problems, I've got all of the files copying to the correct locations but the .service is not running at startup. I used connman-conf.bb<http://connman-conf.bb> as the template for my .bb file:

SUMMARY="recipe to create CAN bus startup service"

LICENSE = "CLOSED"
LIC_FILES_CHKSUM = ""

inherit systemd

SRC_URI = "file://can_start.sh \
           file://canstart.service \

"

S = "${WORKDIR}"

PACKAGE_ARCH = "${MACHINE_ARCH}"

FILES_${PN} = "${datadir}/*"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi
}

SYSTEMD_SERVICE_${PN} = "canstart.service"

Service file:

[Unit]
Description=Startup CAN bus interface

[Service]
Type=oneshot
ExecStart=@SCRIPTDIR@/can_start.sh

[Install]
WantedBy=network.target

From looking at the connman-conf sample I'm setting everything up correctly and the service should default to running on startup but it is not.

The second 'problem' is really just perplexing, if I dump the variables S contains a path to a directory in my root not "${WORKDIR}".

Any and all help with this would be greatly appreciated.

Regards,

Greg Wilson-Lindberg

--
_______________________________________________
yocto mailing list
[email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
--
Jeremy Thien
Director of Engineering | Adtec Digital [email protected]<mailto:[email protected]> | mobile: +1 (904) 910-1749

#3 lore raw
Quoted 21 lines · Greg Wilson-Lindberg

I changed it to look like:

PACKAGES += "${PN}-service"

FILES_${PN} = "${datadir}/*"
FILES_${PN}-service = "${systemd_system_unitdir}/canstart.service"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi}

SYSTEMD_PACKAGES = "${PN}-service" SYSTEMD_SERVICE_${PN}-service = "canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Quoted 8 lines

Still got the same results, my task is not running at startup. To make sure that there wasn't some problem in running the script, I changed the ExecStart to echo to a file in /tmp. Nothing there. The .service file is not being executed.
I've obviously got something totally messed up, but I'm darned if I understand what it is.

You can check with systemctl status and other commands on the service on running system and might find more details

Quoted 105 lines

------------------------------
*From:* Jeremy Thien <[email protected]>
*Sent:* Wednesday, March 14, 2018 1:08 PM
*To:* Greg Wilson-Lindberg
*Cc:* [email protected]
*Subject:* Re: [yocto] trouble getting systemd oneshot to run

I am no expert, but I have a similar recipe. It might be over complicated, but I put the script in one package and the service in another something like:

PACKAGES += "${PN}-service"
FILES_${PN} = "${datadir}/canstart/canstart.sh " FILES_${PN}-service = "${systemd_unitdir}/system/canstart.service " SYSTEMD_PACKAGES = ${PN}-service" SYSTEMD_SERVICE_${PN}-service = canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Of course, this requires image to install both canstart and canstart-service.

Hope this helps,
Jeremy Thien

Quoted 58 lines · Greg Wilson-Lindberg

I'm building yocto for a raspberry pi3 from Qt's b2qt version.

I'm running into two problems, I've got all of the files copying to the correct locations but the .service is not running at startup. I used connman-conf.bb as the template for my .bb file:

SUMMARY="recipe to create CAN bus startup service"

LICENSE = "CLOSED"
LIC_FILES_CHKSUM = ""

inherit systemd

SRC_URI = "file://can_start.sh \ file://canstart.service \"

S = "${WORKDIR}"

PACKAGE_ARCH = "${MACHINE_ARCH}"

FILES_${PN} = "${datadir}/*"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi}

SYSTEMD_SERVICE_${PN} = "canstart.service"

Service file:

[Unit]
Description=Startup CAN bus interface

[Service]
Type=oneshot
ExecStart=@SCRIPTDIR@/can_start.sh

[Install]
WantedBy=network.target

From looking at the connman-conf sample I'm setting everything up correctly and the service should default to running on startup but it is not.

The second 'problem' is really just perplexing, if I dump the variables S contains a path to a directory in my root not "${WORKDIR}".

Any and all help with this would be greatly appreciated.

Quoted 9 lines

Regards,

Greg Wilson-Lindberg
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
Jeremy Thien
Director of Engineering | Adtec Digital [email protected] | mobile: +1 (904) 910-1749 --
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#4 lore raw

Agreed. I would expect the service file to be in /lib/systemd/system/canstart.service and a symbolic link in /etc/systemd/system/network.target.wants/canstart.service.

If those are both present, then the problem is in the service file. If the symbolic link is missing, try "systemctl enable canstart.service" to see if there is any useful information. "systemctl start canstart.service" and "systemctl status canstart.service" may also help.

In my particular service file, I wanted to start after networking is up so I followed this post
<https://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/>. In the Install section, I have "WantedBy=multi-user.target". In the Unit section, I have "After=network-online.target" and "Wants=network-online.target".

Quoted 141 lines · Khem Raj
Quoted 21 lines · Greg Wilson-Lindberg

I changed it to look like:

PACKAGES += "${PN}-service"

FILES_${PN} = "${datadir}/*"
FILES_${PN}-service = "${systemd_system_unitdir}/canstart.service"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi}

SYSTEMD_PACKAGES = "${PN}-service" SYSTEMD_SERVICE_${PN}-service = "canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Quoted 8 lines

Still got the same results, my task is not running at startup. To make sure that there wasn't some problem in running the script, I changed the ExecStart to echo to a file in /tmp. Nothing there. The .service file is not being executed.
I've obviously got something totally messed up, but I'm darned if I understand what it is.

You can check with systemctl status and other commands on the service on running system and might find more details

Quoted 95 lines

------------------------------
*From:* Jeremy Thien <[email protected]>
*Sent:* Wednesday, March 14, 2018 1:08 PM
*To:* Greg Wilson-Lindberg
*Cc:* [email protected]
*Subject:* Re: [yocto] trouble getting systemd oneshot to run

I am no expert, but I have a similar recipe. It might be over complicated, but I put the script in one package and the service in another something like:

PACKAGES += "${PN}-service"
FILES_${PN} = "${datadir}/canstart/canstart.sh " FILES_${PN}-service = "${systemd_unitdir}/system/canstart.service " SYSTEMD_PACKAGES = ${PN}-service" SYSTEMD_SERVICE_${PN}-service = canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Of course, this requires image to install both canstart and canstart-service.

Hope this helps,
Jeremy Thien

Quoted 58 lines · Greg Wilson-Lindberg

I'm building yocto for a raspberry pi3 from Qt's b2qt version.

I'm running into two problems, I've got all of the files copying to the correct locations but the .service is not running at startup. I used connman-conf.bb as the template for my .bb file:

SUMMARY="recipe to create CAN bus startup service"

LICENSE = "CLOSED"
LIC_FILES_CHKSUM = ""

inherit systemd

SRC_URI = "file://can_start.sh \ file://canstart.service \"

S = "${WORKDIR}"

PACKAGE_ARCH = "${MACHINE_ARCH}"

FILES_${PN} = "${datadir}/*"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi}

SYSTEMD_SERVICE_${PN} = "canstart.service"

Service file:

[Unit]
Description=Startup CAN bus interface

[Service]
Type=oneshot
ExecStart=@SCRIPTDIR@/can_start.sh

[Install]
WantedBy=network.target

From looking at the connman-conf sample I'm setting everything up correctly and the service should default to running on startup but it is not.

The second 'problem' is really just perplexing, if I dump the variables S contains a path to a directory in my root not "${WORKDIR}".

Any and all help with this would be greatly appreciated.

Quoted 9 lines

Regards,

Greg Wilson-Lindberg
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Quoted 11 lines

--
Jeremy Thien
Director of Engineering | Adtec Digital [email protected] | mobile: +1 (904) 910-1749 <(904)%20910-1749>
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Quoted 1 line

--

Jeremy Thien
Director of Engineering | Adtec Digital [email protected] | mobile: +1 (904) 910-1749

#5 lore raw

Well, first, thanks to all for the help.

The recommendation for systemctl is what finally led me to my mistake. I was blindly figuring that systemd would figure out that my file named can_start.sh was a shell script, without putting #!/bin/sh at the beginning of it. dumb.

At any rate, I've got it running now, on to the next problem.

Thanks again for the community and all of your help,

Greg

________________________________
From: Jeremy Thien <[email protected]>
Sent: Thursday, March 15, 2018 6:44:17 AM
To: Khem Raj
Cc: Greg Wilson-Lindberg; [email protected]
Subject: Re: [yocto] trouble getting systemd oneshot to run

Agreed. I would expect the service file to be in /lib/systemd/system/canstart.service and a symbolic link in /etc/systemd/system/network.target.wants/canstart.service.

If those are both present, then the problem is in the service file. If the symbolic link is missing, try "systemctl enable canstart.service" to see if there is any useful information. "systemctl start canstart.service" and "systemctl status canstart.service" may also help.

In my particular service file, I wanted to start after networking is up so I followed this post<https://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/>. In the Install section, I have "WantedBy=multi-user.target". In the Unit section, I have "After=network-online.target" and "Wants=network-online.target".

On Wed, Mar 14, 2018 at 10:28 PM Khem Raj <[email protected]<mailto:[email protected]>> wrote:
On Wed, Mar 14, 2018 at 3:20 PM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:

I changed it to look like:

PACKAGES += "${PN}-service"

FILES_${PN} = "${datadir}/*"
FILES_${PN}-service = "${systemd_system_unitdir}/canstart.service"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi
}

SYSTEMD_PACKAGES = "${PN}-service" SYSTEMD_SERVICE_${PN}-service = "canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Still got the same results, my task is not running at startup.
To make sure that there wasn't some problem in running the script, I changed the ExecStart to echo to a file in /tmp. Nothing there. The .service file is not being executed. I've obviously got something totally messed up, but I'm darned if I understand what it is.

You can check with systemctl status and other commands on the service on running system and might find more details

________________________________
From: Jeremy Thien <[email protected]<mailto:[email protected]>>
Sent: Wednesday, March 14, 2018 1:08 PM
To: Greg Wilson-Lindberg
Cc: [email protected]<mailto:[email protected]>
Subject: Re: [yocto] trouble getting systemd oneshot to run

I am no expert, but I have a similar recipe. It might be over complicated, but I put the script in one package and the service in another something like:

PACKAGES += "${PN}-service"
FILES_${PN} = "${datadir}/canstart/canstart.sh " FILES_${PN}-service = "${systemd_unitdir}/system/canstart.service " SYSTEMD_PACKAGES = ${PN}-service" SYSTEMD_SERVICE_${PN}-service = canstart.service" SYSTEMD_AUTO_ENABLE_${PN}-service = "enable"

Of course, this requires image to install both canstart and canstart-service.

Hope this helps,
Jeremy Thien

On Wed, Mar 14, 2018 at 3:21 PM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:

I'm building yocto for a raspberry pi3 from Qt's b2qt version.

I'm running into two problems, I've got all of the files copying to the correct locations but the .service is not running at startup. I used connman-conf.bb<http://connman-conf.bb> as the template for my .bb file:

SUMMARY="recipe to create CAN bus startup service"

LICENSE = "CLOSED"
LIC_FILES_CHKSUM = ""

inherit systemd

SRC_URI = "file://can_start.sh \
           file://canstart.service \

"

S = "${WORKDIR}"

PACKAGE_ARCH = "${MACHINE_ARCH}"

FILES_${PN} = "${datadir}/*"

do_install () {
    if test -e ${WORKDIR}/can_start.sh &&
       test -e ${WORKDIR}/canstart.service; then
        install -d ${D}${datadir}/canstart
        install -m 0755 ${WORKDIR}/can_start.sh ${D}${datadir}/canstart
        install -d ${D}${systemd_system_unitdir}
        install -m 0644 ${WORKDIR}/canstart.service ${D}${systemd_system_unitdir}
        sed -i -e 's|@SCRIPTDIR@|${datadir}/canstart|g' ${D}${systemd_system_unitdir}/canstart.service
    fi
}

SYSTEMD_SERVICE_${PN} = "canstart.service"

Service file:

[Unit]
Description=Startup CAN bus interface

[Service]
Type=oneshot
ExecStart=@SCRIPTDIR@/can_start.sh

[Install]
WantedBy=network.target

From looking at the connman-conf sample I'm setting everything up correctly and the service should default to running on startup but it is not.

The second 'problem' is really just perplexing, if I dump the variables S contains a path to a directory in my root not "${WORKDIR}".

Any and all help with this would be greatly appreciated.

Regards,

Greg Wilson-Lindberg

--
_______________________________________________
yocto mailing list
[email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
--
Jeremy Thien
Director of Engineering | Adtec Digital [email protected]<mailto:[email protected]> | mobile: +1 (904) 910-1749<tel:(904)%20910-1749> --
_______________________________________________
yocto mailing list
[email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
--
Jeremy Thien
Director of Engineering | Adtec Digital [email protected]<mailto:[email protected]> | mobile: +1 (904) 910-1749