pwm: Some fixes preparing chardev support
Subsystems (4)
cover pwm: Some fixes preparing chardev support
Hello,
while working on character device support for PWMs I found a few inconsistencies that are fixed in this series. After that I plan to work on getting the character device support into shape to get it into mainline, too.
While some of these patches qualify as fixes I think there is no urge to get them into 6.15, but given there is a bunch of such changes I might send them to all together to Linus for inclusion to 6.15.
Best regards
Uwe
Uwe Kleine-König (6):
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be
modified
pwm: stm32: Don't open-code TIM_CCER_CCxE()
pwm: stm32: Emit debug output also for corner cases of the rounding
callbacks
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was
rounded up
pwm: Do stricter return value checking for .round_waveform_tohw()
drivers/pwm/core.c | 23 ++++++++++++----------- drivers/pwm/pwm-axi-pwmgen.c | 10 +++++++--- drivers/pwm/pwm-stm32.c | 25 +++++++++---------------- 3 files changed, 28 insertions(+), 30 deletions(-)
base-commit: e48e99b6edf41c69c5528aa7ffb2daf3c59ee105
Signature · 1 line
2.47.2
PATCH 1/6 pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
Waveform parameters are supposed to be rounded down to the next value possible for the hardware. However when a requested value is too small, .round_waveform_tohw() is supposed to pick the next bigger value and return 1. Let pwm_set_waveform() behave in the same way.
This creates consistency between pwm_set_waveform_might_sleep() with exact=false and pwm_round_waveform_might_sleep() + pwm_set_waveform_might_sleep() with exact=true.
The PWM_DEBUG rounding check has to be adapted to only trigger if no uprounding happend.
--- drivers/pwm/core.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/pwm/core.c +7 -6
@@ -322,7 +322,7 @@ static int __pwm_set_waveform(struct pwm_device *pwm,const struct pwm_ops *ops = chip->ops;char wfhw[WFHWSIZE ];struct pwm_waveform wf_rounded; -int err; +int err, ret_tohw;BUG_ON (WFHWSIZE < ops->sizeof_wfhw);
@@ -332,16 +332,16 @@ static int __pwm_set_waveform(struct pwm_device *pwm,if (!pwm_wf_valid (wf))return -EINVAL ; - err =__pwm_round_waveform_tohw (chip, pwm, wf, &wfhw); -if (err) -return err; + ret_tohw =__pwm_round_waveform_tohw (chip, pwm, wf, &wfhw); +if (ret_tohw <0 ) +return ret_tohw;if ((IS_ENABLED (CONFIG_PWM_DEBUG ) || exact) && wf->period_length_ns) { err =__pwm_round_waveform_fromhw (chip, pwm, &wfhw, &wf_rounded);if (err)return err; -if (IS_ENABLED (CONFIG_PWM_DEBUG ) && !pwm_check_rounding (wf, &wf_rounded)) +if (IS_ENABLED (CONFIG_PWM_DEBUG ) && ret_tohw ==0 && !pwm_check_rounding (wf, &wf_rounded))dev_err (&chip->dev,"Wrong rounding: requested %llu/%llu [+%llu], result %llu/%llu [+%llu]\n" , wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns, wf_rounded.duty_length_ns, wf_rounded.period_length_ns, wf_rounded.duty_offset_ns);
@@ -382,7 +382,8 @@ static int __pwm_set_waveform(struct pwm_device *pwm, wf_rounded.duty_length_ns, wf_rounded.period_length_ns, wf_rounded.duty_offset_ns, wf_set.duty_length_ns, wf_set.period_length_ns, wf_set.duty_offset_ns); } -return 0 ; + +return ret_tohw; }/**
Signature · 1 line
2.47.2
Re: [PATCH 1/6] pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
Quoted 5 lines · Uwe Kleine-König
Waveform parameters are supposed to be rounded down to the next value possible for the hardware. However when a requested value is too small, .round_waveform_tohw() is supposed to pick the next bigger value and return 1. Let
pwm_set_waveform()behave in the same way.
Quoted 8 lines
This creates consistency between
pwm_set_waveform_might_sleep()with exact=false andpwm_round_waveform_might_sleep()+pwm_set_waveform_might_sleep()with exact=true.The
PWM_DEBUGrounding check has to be adapted to only trigger if no uprounding happend.Signed-off-by Uwe Kleine-König <[email protected]>
PATCH 2/6 pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
In reply to Uwe Kleine-KönigIf another channel is already enabled period must not be modified. If the requested period is smaller than this unchangable period the driver is still supposed to search a duty_cycle according to the usual rounding rules.
So don't set the duty_cycle to 0 but continue to determine an appropriate value for ccr.
--- drivers/pwm/pwm-stm32.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/pwm/pwm-stm32.c +3 -9
@@ -103,22 +103,16 @@ static int stm32_pwm_round_waveform_tohw(struct pwm_chip *chip,if (ret) goto out; -/* -* calculate the best value for ARR for the given PSC, refuse if -* the resulting period gets bigger than the requested one. -*/ arr =mul_u64_u64_div_u64 (wf->period_length_ns, rate, (u64 )NSEC_PER_SEC * (wfhw->psc +1 ));if (arr <= wfhw->arr) {/* -* requested period is small than the currently +* requested period is smaller than the currently * configured and unchangable period, report back the smallest -* possible period, i.e. the current state; Initialize -* ccr to anything valid. +* possible period, i.e. the current state and return 1 +* to indicate the wrong rounding direction. */ - wfhw->ccr =0 ; ret =1 ; - goto out; } }else {
Signature · 1 line
2.47.2
PATCH 3/6 pwm: stm32: Don't open-code TIM_CCER_CCxE()
In reply to Uwe Kleine-KönigInstead of manually calculating the offset of the channels CCxE bit, make use of the TIM_CCER_CCxE macro.
--- drivers/pwm/pwm-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pwm/pwm-stm32.c +1 -1
@@ -88,7 +88,7 @@ static int stm32_pwm_round_waveform_tohw(struct pwm_chip *chip, rate =clk_get_rate (priv->clk); -if (active_channels (priv) & ~(1 << ch *4 )) { +if (active_channels (priv) & ~TIM_CCER_CCxE (ch +1 )) {u64 arr;/*
Signature · 1 line
2.47.2
PATCH 4/6 pwm: stm32: Emit debug output also for corner cases of the rounding callbacks
In reply to Uwe Kleine-KönigWhen you're interested in the actual register settings the driver chooses or interprets you want to see them also for calls that hit corner cases.
Make sure that all calls to stm32_pwm_round_waveform_tohw() and stm32_pwm_round_waveform_fromhw() emit the debug message about the register settings.
--- drivers/pwm/pwm-stm32.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/pwm/pwm-stm32.c +5 -6
@@ -180,11 +180,11 @@ static int stm32_pwm_round_waveform_tohw(struct pwm_chip *chip, wfhw->ccr =min_t (u64, ccr, wfhw->arr +1 ); +out:dev_dbg (&chip->dev,"pwm#%u: %lld/%lld [+%lld] @%lu -> CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x\n" , pwm->hwpwm, wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns, rate, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr); -out:clk_disable (priv->clk);return ret;
@@ -236,17 +236,16 @@ static int stm32_pwm_round_waveform_fromhw(struct pwm_chip *chip, wf->duty_length_ns = ccr_ns; wf->duty_offset_ns =0 ; } - -dev_dbg (&chip->dev,"pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n" , - pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate, - wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns); - }else { *wf = (struct pwm_waveform ){ .period_length_ns =0 , }; } +dev_dbg (&chip->dev,"pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n" , + pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate, + wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns); +return 0 ; }
Signature · 1 line
2.47.2
kernel test robot
build botRe: [PATCH 4/6] pwm: stm32: Emit debug output also for corner cases of the rounding callbacks
kernel test robot noticed the following build errors:
Hi Uwe,
kernel test robot noticed the following build errors:
[auto build test ERROR on e48e99b6edf41c69c5528aa7ffb2daf3c59ee105]
url: https://github.com/intel-lab-lkp/linux/commits/Uwe-Kleine-K-nig/pwm-Let-pwm_set_waveform-succeed-even-if-lowlevel-driver-rounded-up/20250405-173024 base: e48e99b6edf41c69c5528aa7ffb2daf3c59ee105 patch link: https://lore.kernel.org/r/fe154e79319da5ff4159cdc71201a9d3b395e491.1743844730.git.u.kleine-koenig%40baylibre.com patch subject: [PATCH 4/6] pwm: stm32: Emit debug output also for corner cases of the rounding callbacks config: arm-randconfig-004-20250406 (https://download.01.org/0day-ci/archive/20250406/[email protected]/config) compiler: arm-linux-gnueabi-gcc (GCC) 10.5.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250406/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from include/linux/device.h:15,
from include/linux/dmaengine.h:8,
from include/linux/mfd/stm32-timers.h:11,
from drivers/pwm/pwm-stm32.c:12:
drivers/pwm/pwm-stm32.c: In function 'stm32_pwm_round_waveform_fromhw':
>> drivers/pwm/pwm-stm32.c:246:60: error: 'rate' undeclared (first use in this function)
246 | pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate,
| ^~~~
include/linux/dev_printk.h:139:35: note: in definition of macro 'dev_no_printk'
139 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/pwm/pwm-stm32.c:245:2: note: in expansion of macro 'dev_dbg'
245 | dev_dbg(&chip->dev, "pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n",
| ^~~~~~~
drivers/pwm/pwm-stm32.c:246:60: note: each undeclared identifier is reported only once for each function it appears in
246 | pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate,
| ^~~~
include/linux/dev_printk.h:139:35: note: in definition of macro 'dev_no_printk'
139 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/pwm/pwm-stm32.c:245:2: note: in expansion of macro 'dev_dbg'
245 | dev_dbg(&chip->dev, "pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n",
| ^~~~~~~vim +/rate +246 drivers/pwm/pwm-stm32.c
208
209 static int stm32_pwm_round_waveform_fromhw(struct pwm_chip *chip,
210 struct pwm_device *pwm,
211 const void *_wfhw,
212 struct pwm_waveform *wf)
213 {
214 const struct stm32_pwm_waveform *wfhw = _wfhw;
215 struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
216 unsigned int ch = pwm->hwpwm;
217
218 if (wfhw->ccer & TIM_CCER_CCxE(ch + 1)) {
219 unsigned long rate = clk_get_rate(priv->clk);
220 u64 ccr_ns;
221
222 /* The result doesn't overflow for rate >= 15259 */
223 wf->period_length_ns = stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * (wfhw->arr + 1),
224 NSEC_PER_SEC, rate);
225
226 ccr_ns = stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * wfhw->ccr,
227 NSEC_PER_SEC, rate);
228
229 if (wfhw->ccer & TIM_CCER_CCxP(ch + 1)) {
230 wf->duty_length_ns =
231 stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * (wfhw->arr + 1 - wfhw->ccr),
232 NSEC_PER_SEC, rate);
233
234 wf->duty_offset_ns = ccr_ns;
235 } else {
236 wf->duty_length_ns = ccr_ns;
237 wf->duty_offset_ns = 0;
238 }
239 } else {
240 *wf = (struct pwm_waveform){
241 .period_length_ns = 0,
242 };
243 }
244
245 dev_dbg(&chip->dev, "pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n",
> 246 pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate, 247 wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns);
248
249 return 0;
250 }
251
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
kernel test robot
build botRe: [PATCH 4/6] pwm: stm32: Emit debug output also for corner cases of the rounding callbacks
In reply to Uwe Kleine-Königkernel test robot noticed the following build errors:
Hi Uwe,
kernel test robot noticed the following build errors:
[auto build test ERROR on e48e99b6edf41c69c5528aa7ffb2daf3c59ee105]
url: https://github.com/intel-lab-lkp/linux/commits/Uwe-Kleine-K-nig/pwm-Let-pwm_set_waveform-succeed-even-if-lowlevel-driver-rounded-up/20250405-173024 base: e48e99b6edf41c69c5528aa7ffb2daf3c59ee105 patch link: https://lore.kernel.org/r/fe154e79319da5ff4159cdc71201a9d3b395e491.1743844730.git.u.kleine-koenig%40baylibre.com patch subject: [PATCH 4/6] pwm: stm32: Emit debug output also for corner cases of the rounding callbacks config: x86_64-buildonly-randconfig-001-20250406 (https://download.01.org/0day-ci/archive/20250406/[email protected]/config) compiler: clang version 20.1.2 (https://github.com/llvm/llvm-project 58df0ef89dd64126512e4ee27b4ac3fd8ddf6247) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250406/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
>> drivers/pwm/pwm-stm32.c:246:60: error: use of undeclared identifier 'rate'
246 | pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate,
| ^1 error generated.
vim +/rate +246 drivers/pwm/pwm-stm32.c
208
209 static int stm32_pwm_round_waveform_fromhw(struct pwm_chip *chip,
210 struct pwm_device *pwm,
211 const void *_wfhw,
212 struct pwm_waveform *wf)
213 {
214 const struct stm32_pwm_waveform *wfhw = _wfhw;
215 struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
216 unsigned int ch = pwm->hwpwm;
217
218 if (wfhw->ccer & TIM_CCER_CCxE(ch + 1)) {
219 unsigned long rate = clk_get_rate(priv->clk);
220 u64 ccr_ns;
221
222 /* The result doesn't overflow for rate >= 15259 */
223 wf->period_length_ns = stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * (wfhw->arr + 1),
224 NSEC_PER_SEC, rate);
225
226 ccr_ns = stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * wfhw->ccr,
227 NSEC_PER_SEC, rate);
228
229 if (wfhw->ccer & TIM_CCER_CCxP(ch + 1)) {
230 wf->duty_length_ns =
231 stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * (wfhw->arr + 1 - wfhw->ccr),
232 NSEC_PER_SEC, rate);
233
234 wf->duty_offset_ns = ccr_ns;
235 } else {
236 wf->duty_length_ns = ccr_ns;
237 wf->duty_offset_ns = 0;
238 }
239 } else {
240 *wf = (struct pwm_waveform){
241 .period_length_ns = 0,
242 };
243 }
244
245 dev_dbg(&chip->dev, "pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n",
> 246 pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate, 247 wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns);
248
249 return 0;
250 }
251
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
PATCH 5/6 pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
In reply to Uwe Kleine-KönigThe .round_waveform_tohw() is supposed to return 1 if the requested waveform cannot be implemented by rounding down all parameters. Also adapt the corresponding comment to better describe why the implemented procedure is right.
--- drivers/pwm/pwm-axi-pwmgen.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/pwm/pwm-axi-pwmgen.c +7 -3
@@ -75,6 +75,7 @@ static int axi_pwmgen_round_waveform_tohw(struct pwm_chip *chip, {struct axi_pwmgen_waveform *wfhw = _wfhw;struct axi_pwmgen_ddata *ddata =axi_pwmgen_ddata_from_chip (chip); +int ret =0 ;if (wf->period_length_ns ==0 ) { *wfhw = (struct axi_pwmgen_waveform){
@@ -91,12 +92,15 @@ static int axi_pwmgen_round_waveform_tohw(struct pwm_chip *chip,if (wfhw->period_cnt ==0 ) {/* * The specified period is too short for the hardware. -* Let's round .duty_cycle down to 0 to get a (somewhat) -* valid result. +* So round up .period_cnt to 1 (i.e. the smallest +* possible period). With .duty_cycle and .duty_offset +* being less than or equal to .period, their rounded +* value must be 0. */ wfhw->period_cnt =1 ; wfhw->duty_cycle_cnt =0 ; wfhw->duty_offset_cnt =0 ; + ret =1 ; }else { wfhw->duty_cycle_cnt = min_t(u64, mul_u64_u32_div(wf->duty_length_ns, ddata->clk_rate_hz, NSEC_PER_SEC),
@@ -111,7 +115,7 @@ static int axi_pwmgen_round_waveform_tohw(struct pwm_chip *chip, pwm->hwpwm, wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns, ddata->clk_rate_hz, wfhw->period_cnt, wfhw->duty_cycle_cnt, wfhw->duty_offset_cnt); -return 0 ; +return ret; } static int axi_pwmgen_round_waveform_fromhw(struct pwm_chip *chip, struct pwm_device *pwm,
Signature · 1 line
2.47.2
Re: [PATCH 5/6] pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
Quoted 6 lines · Uwe Kleine-König
The .round_waveform_tohw() is supposed to return 1 if the requested waveform cannot be implemented by rounding down all parameters. Also adapt the corresponding comment to better describe why the implemented procedure is right.
Signed-off-by Uwe Kleine-König <[email protected]>
PATCH 6/6 pwm: Do stricter return value checking for .round_waveform_tohw()
In reply to Uwe Kleine-KönigThe .round_waveform_tohw() is supposed to return 0 if the request could be rounded down to match the hardware capabilities and return 1 if rounding down wasn't possible.
Expand the PWM_DEBUG check to not only assert proper downrounding if 0 was returned but also check that it was actually rounded up when the callback signalled uprounding.
--- drivers/pwm/core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/pwm/core.c +6 -6
@@ -270,10 +270,10 @@ int pwm_round_waveform_might_sleep(struct pwm_device *pwm, struct pwm_waveform * wf_req.duty_length_ns, wf_req.period_length_ns, wf_req.duty_offset_ns, ret_tohw);if (IS_ENABLED (CONFIG_PWM_DEBUG ) && - ret_tohw ==0 && !pwm_check_rounding (&wf_req, wf)) -dev_err (&chip->dev,"Wrong rounding: requested %llu/%llu [+%llu], result %llu/%llu [+%llu]\n" , + (ret_tohw ==0 ) !=pwm_check_rounding (&wf_req, wf)) +dev_err (&chip->dev,"Wrong rounding: requested %llu/%llu [+%llu], result %llu/%llu [+%llu], ret: %d\n" , wf_req.duty_length_ns, wf_req.period_length_ns, wf_req.duty_offset_ns, - wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns); + wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns, ret_tohw);return ret_tohw; }
@@ -341,10 +341,10 @@ static int __pwm_set_waveform(struct pwm_device *pwm,if (err)return err; -if (IS_ENABLED (CONFIG_PWM_DEBUG ) && ret_tohw ==0 && !pwm_check_rounding (wf, &wf_rounded)) -dev_err (&chip->dev,"Wrong rounding: requested %llu/%llu [+%llu], result %llu/%llu [+%llu]\n" , +if (IS_ENABLED (CONFIG_PWM_DEBUG ) && (ret_tohw ==0 ) !=pwm_check_rounding (wf, &wf_rounded)) +dev_err (&chip->dev,"Wrong rounding: requested %llu/%llu [+%llu], result %llu/%llu [+%llu], ret: %d\n" , wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns, - wf_rounded.duty_length_ns, wf_rounded.period_length_ns, wf_rounded.duty_offset_ns); + wf_rounded.duty_length_ns, wf_rounded.period_length_ns, wf_rounded.duty_offset_ns, ret_tohw);if (exact &&pwmwfcmp (wf, &wf_rounded)) { dev_dbg(&chip->dev, "Requested no rounding, but %llu/%llu [+%llu] -> %llu/%llu [+%llu]\n",
Signature · 1 line
2.47.2
Quoted 14 lines · Uwe Kleine-König
Hello,
while working on character device support for PWMs I found a few inconsistencies that are fixed in this series. After that I plan to work on getting the character device support into shape to get it into mainline, too.
While some of these patches qualify as fixes I think there is no urge to get them into 6.15, but given there is a bunch of such changes I might send them to all together to Linus for inclusion to 6.15.
Best regards
Uwe
Quoted 10 lines
Uwe Kleine-König (6):
pwm: Letpwm_set_waveform()succeed even if lowlevel driver rounded up
pwm: stm32: Search an appropriateduty_cycleif period cannot be
modified
pwm: stm32: Don't open-codeTIM_CCER_CCxE()
pwm: stm32: Emit debug output also for corner cases of the rounding
callbacks
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was
rounded up
pwm: Do stricter return value checking for .round_waveform_tohw()
I applied patches #1, #2 and #5 to
https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/fixes
I still havn't made up my mind about trying to get these into v6.15, but at least they should be included in next for now.
Best regards
Uwe
Quoted 26 lines · Uwe Kleine-König
Quoted 14 lines · Uwe Kleine-König
Hello,
while working on character device support for PWMs I found a few inconsistencies that are fixed in this series. After that I plan to work on getting the character device support into shape to get it into mainline, too.
While some of these patches qualify as fixes I think there is no urge to get them into 6.15, but given there is a bunch of such changes I might send them to all together to Linus for inclusion to 6.15.
Best regards
UweQuoted 10 lines
Uwe Kleine-König (6):
pwm: Letpwm_set_waveform()succeed even if lowlevel driver rounded up
pwm: stm32: Search an appropriateduty_cycleif period cannot be
modified
pwm: stm32: Don't open-codeTIM_CCER_CCxE()
pwm: stm32: Emit debug output also for corner cases of the rounding
callbacks
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was
rounded up
pwm: Do stricter return value checking for .round_waveform_tohw()
Quoted 2 lines
I applied patches #1, #2 and #5 to
https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/fixes
And patches #3, #4 and #6 applied to
https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/for-next
with
drivers/pwm/pwm-stm32.c +1 -1
@@ -213,10 +213,10 @@ static int stm32_pwm_round_waveform_fromhw(struct pwm_chip *chip, {const struct stm32_pwm_waveform *wfhw = _wfhw;struct stm32_pwm *priv =to_stm32_pwm_dev (chip); +unsigned long rate =clk_get_rate (priv->clk);unsigned int ch = pwm->hwpwm;if (wfhw->ccer &TIM_CCER_CCxE (ch +1 )) { -unsigned long rate =clk_get_rate (priv->clk);u64 ccr_ns;/* The result doesn't overflow for rate >= 15259 */
squashed into #4 to fix the build failure that the 0day robot reported in this thread.
Best regards
Uwe