Skip to contentSkip to conversation

x86: Use resource_set_{range,size}() helpers

PATCH In review Ilpo Järvinen 4 participants 11 messages Apr 16, 2025 – Apr 19, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86: Use resource_set_{range,size}() helpers

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

---
 arch/x86/kernel/acpi/boot.c    | 4 ++--
 arch/x86/kernel/amd_nb.c       | 3 +--
 arch/x86/kernel/apic/apic.c    | 3 +--
 arch/x86/kernel/apic/io_apic.c | 3 +--
 arch/x86/kernel/probe_roms.c   | 3 +--
 arch/x86/pci/fixup.c           | 4 ++--
 arch/x86/pci/intel_mid_pci.c   | 2 +-
 7 files changed, 9 insertions(+), 13 deletions(-)
arch/x86/kernel/acpi/boot.c +2 -2
index dae6a73be40e..4490cbc01030 100644
@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/efi-bgrt.h>
 #include <linux/serial_core.h>
+#include <linux/sizes.h>
 #include <linux/pgtable.h>
 
 #include <asm/e820/api.h>
@@ -940,8 +941,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
 	snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
 		 hpet_tbl->sequence);
 
-	hpet_res->start = hpet_address;
-	hpet_res->end = hpet_address + (1 * 1024) - 1;
+	resource_set_range(hpet_res, hpet_address, SZ_1K);
 
 	return 0;
 }
arch/x86/kernel/amd_nb.c +1 -2
index 6d12a9b69432..cba336dcb40d 100644
@@ -164,8 +164,7 @@ struct resource *amd_get_mmconfig_range(struct resource *res)
 			 FAM10H_MMIO_CONF_BUSRANGE_MASK;
 
 	res->flags = IORESOURCE_MEM;
-	res->start = base;
-	res->end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
+	resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));
 	return res;
 }
 
arch/x86/kernel/apic/apic.c +1 -2
index 62584a347931..efd3304ecbb3 100644
@@ -2640,8 +2640,7 @@ static int __init lapic_insert_resource(void)
 		return -1;
 
 	/* Put local APIC into the resource map. */
-	lapic_resource.start = apic_mmio_base;
-	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+	resource_set_range(&lapic_resource, apic_mmio_base, PAGE_SIZE);
 	insert_resource(&iomem_resource, &lapic_resource);
 
 	return 0;
arch/x86/kernel/apic/io_apic.c +1 -2
index eebc360ed1bb..3069885d6421 100644
@@ -2571,8 +2571,7 @@ void __init io_apic_init_mappings(void)
 				__fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), ioapic_phys);
 		idx++;
 
-		ioapic_res->start = ioapic_phys;
-		ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
+		resource_set_range(ioapic_res, ioapic_phys, IO_APIC_SLOT_SIZE);
 		ioapic_res++;
 	}
 }
arch/x86/kernel/probe_roms.c +1 -2
index cc2c34ba7228..44da85e50c44 100644
@@ -260,8 +260,7 @@ void __init probe_roms(void)
 		if (!length || start + length > upper || !romchecksum(rom, length))
 			continue;
 
-		adapter_rom_resources[i].start = start;
-		adapter_rom_resources[i].end = start + length - 1;
+		resource_set_range(&adapter_rom_resources[i], start, length);
 		request_resource(&iomem_resource, &adapter_rom_resources[i]);
 
 		start = adapter_rom_resources[i++].end & ~2047UL;
arch/x86/pci/fixup.c +2 -2
index efefeb82ab61..94e98e3bf041 100644
@@ -7,6 +7,7 @@
 #include <linux/delay.h>
 #include <linux/dmi.h>
 #include <linux/pci.h>
+#include <linux/sizes.h>
 #include <linux/suspend.h>
 #include <linux/vgaarb.h>
 #include <asm/amd_node.h>
@@ -347,8 +348,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
 			if (res->parent)
 				release_resource(res);
 
-			res->start = 0xC0000;
-			res->end = res->start + 0x20000 - 1;
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;
 			dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
arch/x86/pci/intel_mid_pci.c +1 -1
index b433b1753016..5e047e802d5d 100644
@@ -399,7 +399,7 @@ static void pci_fixed_bar_fixup(struct pci_dev *dev)
 
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
-		dev->resource[i].end = dev->resource[i].start + size - 1;
+		resource_set_size(&dev->resource[i], size);
 		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
 	}
 }
Signature · 1 line
2.39.5
#1 lore raw
Quoted 5 lines · Ilpo Järvinen

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

...

arch/x86/kernel/amd_nb.c struct resource *amd_get_mmconfig_range(struct resource *res) · line 167

Quoted 1 line
arch/x86/kernel/amd_nb.c +1 -0
+	resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));

Then probably

	resource_set_range(res, base, BIT_ULL(segn_busn_bits) * SZ_1M);

to follow the same "While at it"?

...

arch/x86/pci/fixup.c static void pci_fixup_video(struct pci_dev *pdev) · line 353

Quoted 3 lines
arch/x86/pci/fixup.c +1 -0
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;

I'm wondering why not DEFINE_RES_MEM() in such cases?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#2 lore raw
Quoted 1 line · Andy Shevchenko

On Wed, Apr 16, 2025 at 01:13:18PM +0300, Ilpo Järvinen wrote:

...

Quoted 5 lines

arch/x86/pci/fixup.c static void pci_fixup_video(struct pci_dev *pdev) · line 353

Quoted 3 lines
arch/x86/pci/fixup.c +1 -0
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;

I'm wondering why not DEFINE_RES_MEM() in such cases?

For the reference:
1af56ff09e67 ("resource: replace open coded variants of DEFINE_RES_*_NAMED()")

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#3 lore raw
In reply to Andy Shevchenko
Quoted 9 lines · Andy Shevchenko
Quoted 5 lines · Ilpo Järvinen

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

...

Quoted 7 lines

arch/x86/kernel/amd_nb.c struct resource *amd_get_mmconfig_range(struct resource *res) · line 167

Quoted 1 line
arch/x86/kernel/amd_nb.c +1 -0
+	resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));

Then probably

	resource_set_range(res, base, BIT_ULL(segn_busn_bits) * SZ_1M);

to follow the same "While at it"?

I'll change that now since you brought it up. It did cross my mind to convert that to * SZ_1M but it seemed to go farther than I wanted with a simple conversion patch.

I've never liked the abuse of BIT*() for size related shifts though, I recall I saw somewhere a helper that was better named for size related operations but I just cannot recall its name and seem to not find that anymore :-(. But until I come across it once again, I guess I'll have to settle to BIT*().

Quoted 5 lines

arch/x86/pci/fixup.c static void pci_fixup_video(struct pci_dev *pdev) · line 353

Quoted 3 lines
arch/x86/pci/fixup.c +1 -0
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;

I'm wondering why not DEFINE_RES_MEM() in such cases?

I guess you meant DEFINE_RES() as that seems to allow giving custom flags. However, DEFINE_RES*() will overwrite ->name which seems something that ought to not be done here.

I found one other case from the same file though which is truly defines a resource from scratch.

Signature · 1 line
 i.
#4 lore raw
Quoted 9 lines · Ilpo Järvinen
Quoted 7 lines · Andy Shevchenko

arch/x86/pci/fixup.c static void pci_fixup_video(struct pci_dev *pdev) · line 353

Quoted 3 lines · Ilpo Järvinen
arch/x86/pci/fixup.c +1 -0
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;

I'm wondering why not DEFINE_RES_MEM() in such cases?

Quoted 3 lines

I guess you meant DEFINE_RES() as that seems to allow giving custom flags. However, DEFINE_RES*() will overwrite ->name which seems something that ought to not be done here.

Okay, I haven't checked the initial state of name field here, so then DEFINE_RES_MEM_NAMED()? Or don't we have one?

In any case I would rather see a one assignment for these cases than something hidden behind proposed conversions.

Quoted 2 lines

I found one other case from the same file though which is truly defines a resource from scratch.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#5 lore raw
Quoted 10 lines · Andy Shevchenko
Quoted 9 lines · Ilpo Järvinen
Quoted 7 lines · Andy Shevchenko

arch/x86/pci/fixup.c static void pci_fixup_video(struct pci_dev *pdev) · line 353

Quoted 3 lines · Ilpo Järvinen
arch/x86/pci/fixup.c +1 -0
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;

I'm wondering why not DEFINE_RES_MEM() in such cases?

Quoted 6 lines
Quoted 3 lines

I guess you meant DEFINE_RES() as that seems to allow giving custom flags. However, DEFINE_RES*() will overwrite ->name which seems something that ought to not be done here.

Okay, I haven't checked the initial state of name field here, so then DEFINE_RES_MEM_NAMED()? Or don't we have one?

There's pre-existing res->name on it and your suggestion would have resulted in overwriting it with NULL. res->name seems to be filled earlier by PCI probe code.

Quoted 2 lines

In any case I would rather see a one assignment for these cases than something hidden behind proposed conversions.

TBH, these DEFINE_RES*() helpers are doing hidden things such as blantantly overwriting ->name which I only realized after I had already converted to it as per your suggestion.

And yes, it is possible to pass the pre-existing res->name to DEFINE_RES_NAMED() if that what you insist, though it seems doing it for the sake of DEFINE_RES*() interface rather than this code wanting to really define the resource from scratch.

Given the hidden overwriting, please be careful on suggesting DEFINE_RES*() conversions as it's not as trivial as it seems.

Quoted 5 lines
Quoted 2 lines

I found one other case from the same file though which is truly defines a resource from scratch.

Signature · 1 line
 i.
#6 lore raw
Quoted 4 lines · Ilpo Järvinen
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Ilpo Järvinen
Quoted 1 line · Andy Shevchenko

On Wed, Apr 16, 2025 at 01:13:18PM +0300, Ilpo Järvinen wrote:

...

Quoted 10 lines
Quoted 10 lines
Quoted 9 lines
Quoted 5 lines

arch/x86/pci/fixup.c static void pci_fixup_video(struct pci_dev *pdev) · line 353

Quoted 3 lines
arch/x86/pci/fixup.c +1 -0
+			resource_set_range(res, 0xC0000, SZ_128K);
 			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
 				     IORESOURCE_PCI_FIXED;

I'm wondering why not DEFINE_RES_MEM() in such cases?

I guess you meant DEFINE_RES() as that seems to allow giving custom flags. However, DEFINE_RES*() will overwrite ->name which seems something that ought to not be done here.

Quoted 6 lines
Quoted 2 lines

Okay, I haven't checked the initial state of name field here, so then DEFINE_RES_MEM_NAMED()? Or don't we have one?

There's pre-existing res->name on it and your suggestion would have resulted in overwriting it with NULL. res->name seems to be filled earlier by PCI probe code.

Okay, then the resource_*() may make more sense, indeed.

Quoted 6 lines
Quoted 2 lines

In any case I would rather see a one assignment for these cases than something hidden behind proposed conversions.

TBH, these DEFINE_RES*() helpers are doing hidden things such as blantantly overwriting ->name which I only realized after I had already converted to it as per your suggestion.

They are specifically named in capital letters, so main use is in static assignments, but they are made compound literals, so it's possible to initialise the on-stack or on-heap at run-time with this be kept in mind. That's why there is nothing hidden, it implies that the struct is fully assigned (with the provided fields and some defaults).

Quoted 7 lines

And yes, it is possible to pass the pre-existing res->name to DEFINE_RES_NAMED() if that what you insist, though it seems doing it for the sake of DEFINE_RES*() interface rather than this code wanting to really define the resource from scratch.

Given the hidden overwriting, please be careful on suggesting DEFINE_RES*() conversions as it's not as trivial as it seems.

Yeah, seems not everybody aware of the difference with foo_init_something() vs. FOO_INIT_SOMETHING() :-)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

I found one other case from the same file though which is truly defines a resource from scratch.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw
In reply to Ilpo Järvinen
Quoted 23 lines · Ilpo Järvinen
Quoted 9 lines · Andy Shevchenko
Quoted 5 lines · Ilpo Järvinen

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

...

Quoted 7 lines

arch/x86/kernel/amd_nb.c struct resource *amd_get_mmconfig_range(struct resource *res) · line 167

Quoted 1 line
arch/x86/kernel/amd_nb.c +1 -0
+	resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));

Then probably

	resource_set_range(res, base, BIT_ULL(segn_busn_bits) * SZ_1M);

to follow the same "While at it"?

I'll change that now since you brought it up. It did cross my mind to convert that to * SZ_1M but it seemed to go farther than I wanted with a simple conversion patch.

Quoted 5 lines

I've never liked the abuse of BIT*() for size related shifts though, I recall I saw somewhere a helper that was better named for size related operations but I just cannot recall its name and seem to not find that anymore :-(. But until I come across it once again, I guess I'll have to settle to BIT*().

BITS_TO_LONGS()?

Thanks,

Ingo

#8 lore raw
Quoted 26 lines · Ingo Molnar
Quoted 23 lines · Ilpo Järvinen
Quoted 9 lines · Andy Shevchenko
Quoted 5 lines · Ilpo Järvinen

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

...

Quoted 7 lines

arch/x86/kernel/amd_nb.c struct resource *amd_get_mmconfig_range(struct resource *res) · line 167

Quoted 1 line
arch/x86/kernel/amd_nb.c +1 -0
+	resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));

Then probably

	resource_set_range(res, base, BIT_ULL(segn_busn_bits) * SZ_1M);

to follow the same "While at it"?

I'll change that now since you brought it up. It did cross my mind to convert that to * SZ_1M but it seemed to go farther than I wanted with a simple conversion patch.

Quoted 7 lines
Quoted 5 lines

I've never liked the abuse of BIT*() for size related shifts though, I recall I saw somewhere a helper that was better named for size related operations but I just cannot recall its name and seem to not find that anymore :-(. But until I come across it once again, I guess I'll have to settle to BIT*().

BITS_TO_LONGS()?

Hi Ingo,

I'm not entiry sure if you're referring to my BIT*() matching unrelated macros such as BITS_TO_LONGS() (I only meant BIT() and BIT_ULL() which I thought was clear from the context), or that BITS_TO_LONGS() would be the solution what I'm looking for.

In case you meant the latter, BITS_TO_LONGS() is not what I'm after. BIT(n) sets nth bit and what I'm looking for is converting n to power of two size. Obviously, both are mathematically doing 2^n (or 1 << n) but they feel conceptually very different things.

Signature · 1 line
 i.
#9 lore raw
Quoted 34 lines · Ilpo Järvinen
Quoted 32 lines · Ingo Molnar
Quoted 28 lines · Ilpo Järvinen
Quoted 9 lines · Andy Shevchenko
Quoted 5 lines · Ilpo Järvinen

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

...

Quoted 7 lines

arch/x86/kernel/amd_nb.c struct resource *amd_get_mmconfig_range(struct resource *res) · line 167

Quoted 1 line
arch/x86/kernel/amd_nb.c +1 -0
+	resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));

Then probably

	resource_set_range(res, base, BIT_ULL(segn_busn_bits) * SZ_1M);

to follow the same "While at it"?

I'll change that now since you brought it up. It did cross my mind to convert that to * SZ_1M but it seemed to go farther than I wanted with a simple conversion patch.

I've never liked the abuse of BIT*() for size related shifts though, I recall I saw somewhere a helper that was better named for size related operations but I just cannot recall its name and seem to not find that anymore :-(. But until I come across it once again, I guess I'll have to settle to BIT*().

Quoted 8 lines
Quoted 1 line

BITS_TO_LONGS()?

Hi Ingo,

I'm not entiry sure if you're referring to my BIT*() matching unrelated macros such as BITS_TO_LONGS() (I only meant BIT() and BIT_ULL() which I thought was clear from the context), or that BITS_TO_LONGS() would be the solution what I'm looking for.

Indeed, I misremembered BITS_TO_LONGS() - now that I looked up its definition it's definitely not what you wanted... :)

Thanks,

Ingo

maintainer Acked-by on v1 1/1
#10 lore raw
In reply to Ilpo Järvinen
Quoted 8 lines · Ilpo Järvinen

Convert open coded resource size calculations to use resource_set_{range,size}() helpers.

While at it, use SZ_* for size parameter which makes the intent of code more obvious.

For the change in acpi/boot.c

Quoted 126 lines
---
 arch/x86/kernel/acpi/boot.c    | 4 ++--
 arch/x86/kernel/amd_nb.c       | 3 +--
 arch/x86/kernel/apic/apic.c    | 3 +--
 arch/x86/kernel/apic/io_apic.c | 3 +--
 arch/x86/kernel/probe_roms.c   | 3 +--
 arch/x86/pci/fixup.c           | 4 ++--
 arch/x86/pci/intel_mid_pci.c   | 2 +-
 7 files changed, 9 insertions(+), 13 deletions(-)
arch/x86/kernel/acpi/boot.c +2 -2
index dae6a73be40e..4490cbc01030 100644
@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/efi-bgrt.h>
 #include <linux/serial_core.h>
+#include <linux/sizes.h>
 #include <linux/pgtable.h>
 
 #include <asm/e820/api.h>
@@ -940,8 +941,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
        snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
                 hpet_tbl->sequence);
 
-       hpet_res->start = hpet_address;
-       hpet_res->end = hpet_address + (1 * 1024) - 1;
+       resource_set_range(hpet_res, hpet_address, SZ_1K);
 
        return 0;
 }
arch/x86/kernel/amd_nb.c +1 -2
index 6d12a9b69432..cba336dcb40d 100644
@@ -164,8 +164,7 @@ struct resource *amd_get_mmconfig_range(struct resource *res)
                         FAM10H_MMIO_CONF_BUSRANGE_MASK;
 
        res->flags = IORESOURCE_MEM;
-       res->start = base;
-       res->end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
+       resource_set_range(res, base, 1ULL << (segn_busn_bits + 20));
        return res;
 }
 
arch/x86/kernel/apic/apic.c +1 -2
index 62584a347931..efd3304ecbb3 100644
@@ -2640,8 +2640,7 @@ static int __init lapic_insert_resource(void)
                return -1;
 
        /* Put local APIC into the resource map. */
-       lapic_resource.start = apic_mmio_base;
-       lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+       resource_set_range(&lapic_resource, apic_mmio_base, PAGE_SIZE);
        insert_resource(&iomem_resource, &lapic_resource);
 
        return 0;
arch/x86/kernel/apic/io_apic.c +1 -2
index eebc360ed1bb..3069885d6421 100644
@@ -2571,8 +2571,7 @@ void __init io_apic_init_mappings(void)
                                __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), ioapic_phys);
                idx++;
 
-               ioapic_res->start = ioapic_phys;
-               ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
+               resource_set_range(ioapic_res, ioapic_phys, IO_APIC_SLOT_SIZE);
                ioapic_res++;
        }
 }
arch/x86/kernel/probe_roms.c +1 -2
index cc2c34ba7228..44da85e50c44 100644
@@ -260,8 +260,7 @@ void __init probe_roms(void)
                if (!length || start + length > upper || !romchecksum(rom, length))
                        continue;
 
-               adapter_rom_resources[i].start = start;
-               adapter_rom_resources[i].end = start + length - 1;
+               resource_set_range(&adapter_rom_resources[i], start, length);
                request_resource(&iomem_resource, &adapter_rom_resources[i]);
 
                start = adapter_rom_resources[i++].end & ~2047UL;
arch/x86/pci/fixup.c +2 -2
index efefeb82ab61..94e98e3bf041 100644
@@ -7,6 +7,7 @@
 #include <linux/delay.h>
 #include <linux/dmi.h>
 #include <linux/pci.h>
+#include <linux/sizes.h>
 #include <linux/suspend.h>
 #include <linux/vgaarb.h>
 #include <asm/amd_node.h>
@@ -347,8 +348,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
                        if (res->parent)
                                release_resource(res);
 
-                       res->start = 0xC0000;
-                       res->end = res->start + 0x20000 - 1;
+                       resource_set_range(res, 0xC0000, SZ_128K);
                        res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
                                     IORESOURCE_PCI_FIXED;
                        dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
arch/x86/pci/intel_mid_pci.c +1 -2
index b433b1753016..5e047e802d5d 100644
@@ -399,7 +399,7 @@ static void pci_fixed_bar_fixup(struct pci_dev *dev)
 
        for (i = 0; i < PCI_STD_NUM_BARS; i++) {
                pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
-               dev->resource[i].end = dev->resource[i].start + size - 1;
+               resource_set_size(&dev->resource[i], size);
                dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
        }
 }
--

2.39.5