configs/freescale_imx8mqevk: bump BSP components to 4.14.98_2.0.0
PATCH 1/1 configs/freescale_imx8mqevk: bump BSP components to 4.14.98_2.0.0
Update Kernel, U-Boot and ATF to NXP BSP version rel_imx_4.14.98_2.0.0_ga
--- configs/freescale_imx8mqevk_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/freescale_imx8mqevk_defconfig +3 -3
@@ -7,7 +7,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/fsl-imx8mq-evk.dtb" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.14.98_2.0.0_ga" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8mq-evk"
@@ -20,14 +20,14 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="rel_imx_4.14.98_2.0.0_ga" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.14.98_2.0.0_ga" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_FORMAT_IMX=y
Signature · 1 line
2.23.0
Fabio Estevam
reviewerPATCH 1/1 configs/freescale_imx8mqevk: bump BSP components to 4.14.98_2.0.0
Hi Julien,
Quoted 2 lines · Julien Olivain
Update Kernel, U-Boot and ATF to NXP BSP version rel_imx_4.14.98_2.0.0_ga
What about switching to imx_4.19.35_1.1.0 instead?
Thanks
PATCH 1/1 configs/freescale_imx8mqevk: bump BSP components to 4.14.98_2.0.0
Hi Fabio,
Quoted 8 lines · Fabio Estevam
Hi Julien,
Quoted 3 lines · Julien Olivain
Update Kernel, U-Boot and ATF to NXP BSP version
rel_imx_4.14.98_2.0.0_gaWhat about switching to imx_4.19.35_1.1.0 instead?
Some packages, like imx-gpu-viv are linked to the i.MX uboot/kernel/atf versions. For example i.MX BSP 4.14.78-1.0.0 uses imx-gpu-viv-6.2.4.p2.3,
but 4.19.35-1.1.0 uses imx-gpu-viv-6.4.0.p1.0, ... (One could eventually workaround this by using kernel-module-imx-gpu-viv, though). This is also
probably the case for other i.MX packages like imx-sc-firmware (with SC RPC API
version), and firmware-imx, and maybe others...
On the other hand, some other board vendors are providing their own BSPs derived from older NXP BSPs (e.g. TechNexion latest BSP is still based on
4.14.98_2.0.0). So updating EVK board to 4.19.35_1.1.0 would probably require
an imx-gpu-viv update too, but would also probably break the TechNexion PicoPi
8M.
This means that, some of the i.MX defconfigs needs to be aligned altogether,
with those packages. My intent was to not update beyond the latest TechNexion
BSP version.
Maybe the correct long-term solution would be to add a "Custom Version" option
in KConfig, for those packages with kernel/uboot/atf dependencies?
Best regards,
Julien.
Thomas Petazzoni
AppliedPATCH 1/1 configs/freescale_imx8mqevk: bump BSP components to 4.14.98_2.0.0
In reply to Julien OlivainQuoted 6 lines · On Tue, 3 Dec 2019 21:38:05 +0100 Julien Olivain <[email protected]> wrote:
Update Kernel, U-Boot and ATF to NXP BSP version rel_imx_4.14.98_2.0.0_ga
Signed-off-by Julien Olivain <[email protected]>--- configs/freescale_imx8mqevk_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Applied to master, thanks.
Fabio: I saw your comment about bumping to 4.19. It obviously makes sense to upgrade to 4.19 when possible, but since bumping to a slightly newer 4.14 also makes sense on its own, I've applied Julien's patch. But of course, bumping to 4.19 needs to be done at some point in the future.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com