Skip to contentSkip to conversation

No sound with ice_1724 when I restart the system since I upgrade to 2.6.26 (+workaround)

DISCUSSION Amaury De Ganseman 1 participant 1 message Jul 20, 2008

lore
Share & tools
lore
#0 lore raw

Hi all, I think it's better to send here ;-)

Additional infos:

Kernel 2.6.26 from kernel.org

/proc/asound/cards:
0 [Juli ]: ICE1724 - ESI Juli@

                      ESI Juli@ at 0xb400, irq 18

+ /var/lib/alsa/asound.state in attach (after stop alsasound, rm asound.state and then restart alsa --> so sound is working)

---------- Forwarded message ----------
From: Amaury De Ganseman <[email protected]>
Date: Tue, Jul 15, 2008 at 9:50 PM
Subject: No sound when I restart the system since I upgrade to 2.6.26 (+workaround)
To: [email protected]

Hi all,

Here is the description and workaround to have sound.
It's related to mixer..but I don't know why it saves wrong mixer settings.

Thanks for help

#I have this problem (no sound when I start the system) since I upgrade to kernel 2.6.26 (driver: ice1724)
#rm asound.state helps but after stopping alsa
#This is in /var/lib/alsa:
localhost alsa # rm asound.state
rm: remove regular file `asound.state'? y
localhost alsa # /etc/init.d/alsasound restart
* WARNING: you are stopping a boot service.
* Stopping pulseaudio ...

                 [ ok ]

* Storing ALSA Mixer Levels ...

                 [ ok ]

* Killing processes using ALSA ...

                 [ ok ]

* Unloading ALSA modules ...

                 [ ok ]

* Loading ALSA modules ...
* Could not detect custom ALSA settings. Loading all detected alsa drivers.
* Loading: snd_ice1724 ...

                 [ ok ]

* Restoring Mixer Levels ...
alsactl: set_control:1300: incompatible field type for control #1
alsactl: set_control:1300: incompatible field type for control #32

                 [ ok ]

* Starting pulseaudio ...
#No sound with amarok (I restart amarok)

                         [ ok ]

localhost alsa # /etc/init.d/alsasound stop
* WARNING: you are stopping a boot service.
* Stopping pulseaudio ...

                 [ ok ]

* Storing ALSA Mixer Levels ...

                 [ ok ]

* Killing processes using ALSA ...

                 [ ok ]

* Unloading ALSA modules ...

                 [ ok ]

localhost alsa # rm asound.state
rm: remove regular file `asound.state'? y
localhost alsa # /etc/init.d/alsasound start
* Loading ALSA modules ...
* Could not detect custom ALSA settings. Loading all detected alsa drivers.
* Loading: snd_ice1724 ...

                 [ ok ]

* Restoring Mixer Levels ...
* No mixer config in /var/lib/alsa/asound.state, you have to unmute
your card!

       [ ok ]

#So I raise up the level of PCM:
localhost alsa # alsamixer

localhost alsa # /etc/init.d/pulseaudio start
* Starting pulseaudio ...

                 [ ok ]

localhost alsa #

#Now I have sound....

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel