ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
Subsystems (2)
PATCH v2 1/1 ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
Enable both gxbb USB controller and add a 5V regulator for the OTG port VBUS
---
This patch was written on Kevin Hilman's repository[1] and branch[2]:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git
[2] v4.8/integ
Chnages since v1:
- rename the usb_pwr node to usb_otg_pwr
- rename the regulator-name "USB_PWR" to "USB_OTG_PWR"
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +29 -0
@@ -64,6 +64,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + usb_otg_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_OTG_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + leds { compatible = "gpio-leds"; blue {
@@ -149,6 +161,23 @@ pinctrl-names = "default"; }; +&usb0_phy { + status = "okay"; + phy-supply = <&usb_otg_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + /* SD */ &sd_emmc_b { status = "okay";
Signature · 1 line
2.7.4
PATCH v2 1/1 ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
Quoted 8 lines · Brian Kim
Enable both gxbb USB controller and add a 5V regulator for the OTG port VBUS
Signed-off-by Brian Kim <[email protected]>---
This patch was written on Kevin Hilman's repository[1] and branch[2]:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git
[2] v4.8/integ
Applied to the v4.10/dt64 branch, and will be included shortly in the integration branch.
Kevin