Skip to contentSkip to conversation

amlogic: add Khadas VIM3L support

PATCH New Christian Hewitt 3 participants 6 messages Dec 11, 2019 – Jan 7, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover amlogic: add Khadas VIM3L support

Khadas VIM3L is a new revision of the VIM3 board that swaps the premium A311D chip for Amlogic's mid-range S905D3 chip.

Christian Hewitt (2):
ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
boards: amlogic: add Khadas VIM3L support

 arch/arm/dts/Makefile                   |   1 +
 arch/arm/dts/meson-sm1-khadas-vim3l.dts |  95 +++++++++++++++++++++++
 board/amlogic/w400/README.khadas-vim3l  | 132 ++++++++++++++++++++++++++++++++
 configs/khadas-vim3l_defconfig          |  62 +++++++++++++++
 4 files changed, 290 insertions(+)
 create mode 100644 arch/arm/dts/meson-sm1-khadas-vim3l.dts
 create mode 100644 board/amlogic/w400/README.khadas-vim3l
 create mode 100644 configs/khadas-vim3l_defconfig
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/2 ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1

Import the Khadas VIM3L device-tree from [1]

[1] e42617b825f8 ("Linux 5.5-rc1")

---
 arch/arm/dts/Makefile                   |  1 +
 arch/arm/dts/meson-sm1-khadas-vim3l.dts | 95 +++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm/dts/meson-sm1-khadas-vim3l.dts
arch/arm/dts/Makefile +1 -0
index 3dc9c4d..b6c9f82 100644
@@ -152,6 +152,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-g12a-sei510.dtb \
 	meson-g12b-odroid-n2.dtb \
 	meson-g12b-a311d-khadas-vim3.dtb \
+	meson-sm1-khadas-vim3l.dtb \
 	meson-sm1-sei610.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
arch/arm/dts/meson-sm1-khadas-vim3l.dts new file +95 -0

95 lines not on this page · raw message

Signature · 1 line
2.7.4
#2 lore raw

PATCH 2/2 boards: amlogic: add Khadas VIM3L support

In reply to Christian Hewitt

Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip instead of A311D. Board config is derived from khadas-vim3_defconfig and sei610_defconfig. README is based on README.khadas-vim3; the difference is that VIM3L uses FIP files from the g12a folder in vendor sources not the g12b folder.

---
 board/amlogic/w400/README.khadas-vim3l | 132 +++++++++++++++++++++++++++++++++
 configs/khadas-vim3l_defconfig         |  62 ++++++++++++++++
 2 files changed, 194 insertions(+)
 create mode 100644 board/amlogic/w400/README.khadas-vim3l
 create mode 100644 configs/khadas-vim3l_defconfig
board/amlogic/w400/README.khadas-vim3l new file +132 -0
new file mode 100644
index 0000000..b53a67c
@@ -0,0 +1,132 @@
+U-Boot for Khadas VIM3L
+=======================
+
+Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion
+Technology Co., Ltd. with the following specifications:
+
+ - Amlogic S905D3 Arm Cortex-A55 quad-core SoC
+ - 2GB LPDDR4 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.1 display
+ - 40-pin GPIO header
+ - 1 x USB 3.0 Host, 1 x USB 2.0 Host
+ - eMMC, microSD
+ - M.2
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+Currently the U-Boot port supports the following devices:
+ - serial
+ - eMMC, microSD
+ - Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - ADC
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make khadas-vim3l_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ > DIR=vim3l-u-boot
+ > git clone --depth 1 \
+       https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
+       $DIR
+
+ > cd vim3l-u-boot
+ > make kvim3l_defconfig
+ > make
+ > export UBOOTDIR=$PWD
+
+ Go back to mainline U-Boot source tree then :
+ > mkdir fip
+
+ > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/
+ > cp $UBOOTDIR/fip/g12a/bl2.bin fip/
+ > cp $UBOOTDIR/fip/g12a/bl30.bin fip/
+ > cp $UBOOTDIR/fip/g12a/bl31.img fip/
+ > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
+ > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/piei.fw fip/
+ > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > sh fip/blx_fix.sh \
+	fip/bl30.bin \
+	fip/zero_tmp \
+	fip/bl30_zero.bin \
+	fip/bl301.bin \
+	fip/bl301_zero.bin \
+	fip/bl30_new.bin \
+	bl30
+
+ > sh fip/blx_fix.sh \
+	fip/bl2.bin \
+	fip/zero_tmp \
+	fip/bl2_zero.bin \
+	fip/acs.bin \
+	fip/bl21_zero.bin \
+	fip/bl2_new.bin \
+	bl2
+
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+					--output fip/bl30_new.bin.g12a.enc \
+					--level v3
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+					--output fip/bl30_new.bin.enc \
+					--level v3 --type bl30
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+					--output fip/bl31.img.enc \
+					--level v3 --type bl31
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+					--output fip/bl33.bin.enc \
+					--level v3 --type bl33 --compress lz4
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+					--output fip/bl2.n.bin.sig
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
+		--output fip/u-boot.bin \
+		--bl2 fip/bl2.n.bin.sig \
+		--bl30 fip/bl30_new.bin.enc \
+		--bl31 fip/bl31.img.enc \
+		--bl33 fip/bl33.bin.enc \
+		--ddrfw1 fip/ddr4_1d.fw \
+		--ddrfw2 fip/ddr4_2d.fw \
+		--ddrfw3 fip/ddr3_1d.fw \
+		--ddrfw4 fip/piei.fw \
+		--ddrfw5 fip/lpddr4_1d.fw \
+		--ddrfw6 fip/lpddr4_2d.fw \
+		--ddrfw7 fip/diag_lpddr4.fw \
+		--ddrfw8 fip/aml_ddr.fw \
+		--ddrfw9 fip/lpddr3_1d.fw \
+		--level v3
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
configs/khadas-vim3l_defconfig new file +62 -0

62 lines not on this page · raw message

Signature · 1 line
2.7.4
#4 lore raw

cover amlogic: add Khadas VIM3L support

In reply to Christian Hewitt
Quoted 7 lines · Christian Hewitt

Khadas VIM3L is a new revision of the VIM3 board that swaps the premium A311D chip for Amlogic's mid-range S905D3 chip.

Christian Hewitt (2):
ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
boards: amlogic: add Khadas VIM3L support

Quoted 9 lines
 arch/arm/dts/Makefile                   |   1 +
 arch/arm/dts/meson-sm1-khadas-vim3l.dts |  95 +++++++++++++++++++++++
 board/amlogic/w400/README.khadas-vim3l  | 132 ++++++++++++++++++++++++++++++++
 configs/khadas-vim3l_defconfig          |  62 +++++++++++++++
 4 files changed, 290 insertions(+)
 create mode 100644 arch/arm/dts/meson-sm1-khadas-vim3l.dts
 create mode 100644 board/amlogic/w400/README.khadas-vim3l
 create mode 100644 configs/khadas-vim3l_defconfig

Will push for next U-Boot release.

Neil

#5 lore raw

cover amlogic: add Khadas VIM3L support

In reply to Christian Hewitt
Quoted 7 lines · Christian Hewitt

Khadas VIM3L is a new revision of the VIM3 board that swaps the premium A311D chip for Amlogic's mid-range S905D3 chip.

Christian Hewitt (2):
ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
boards: amlogic: add Khadas VIM3L support

Quoted 9 lines
 arch/arm/dts/Makefile                   |   1 +
 arch/arm/dts/meson-sm1-khadas-vim3l.dts |  95 +++++++++++++++++++++++
 board/amlogic/w400/README.khadas-vim3l  | 132 ++++++++++++++++++++++++++++++++
 configs/khadas-vim3l_defconfig          |  62 +++++++++++++++
 4 files changed, 290 insertions(+)
 create mode 100644 arch/arm/dts/meson-sm1-khadas-vim3l.dts
 create mode 100644 board/amlogic/w400/README.khadas-vim3l
 create mode 100644 configs/khadas-vim3l_defconfig

Applied to u-boot-amlogic