arm64: dts: meson: audio updates
Subsystems (2)
Jerome Brunet
reviewercover arm64: dts: meson: audio updates
The patchset features a few updates to prepare the addition of the audio on sm1. It fixes the register range of audio fifo which was incorrect.
It also create another layer of dtsi, common to g12a and g12b but not sm1. The audio related device are moved to this file.
This was done because the audio bus, which was at 0xff642000 on g12, has moved 0xff660000 on sm1. Overwriting the reg property was option but it would have left confusing node names on the sm1.
Jerome Brunet (5):
arm64: dts: meson: axg: fix audio fifo reg size
arm64: dts: meson: g12: fix audio fifo reg size
arm64: dts: meson: g12: add a g12 layer
arm64: dts: meson: g12: factor the power domain.
arm64: dts: meson: g12: move audio bus out of g12-common
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 12 +- .../boot/dts/amlogic/meson-g12-common.dtsi | 320 ---------------- arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 344 ++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 15 +- arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 14 +- 5 files changed, 352 insertions(+), 353 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12.dtsi
Signature · 1 line
2.21.0
Jerome Brunet
reviewerPATCH 1/5 arm64: dts: meson: axg: fix audio fifo reg size
The register region size initially is too small to access all the fifo registers.
--- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/amlogic/meson-axg.dtsi +6 -6
@@ -1162,7 +1162,7 @@ toddr_a: audio-controller@100 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
@@ -1173,7 +1173,7 @@ toddr_b: audio-controller@140 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
@@ -1184,7 +1184,7 @@ toddr_c: audio-controller@180 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
@@ -1195,7 +1195,7 @@ frddr_a: audio-controller@1c0 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
@@ -1206,7 +1206,7 @@ frddr_b: audio-controller@200 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
@@ -1217,7 +1217,7 @@ frddr_c: audio-controller@240 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
Signature · 1 line
2.21.0
Jerome Brunet
reviewerPATCH 2/5 arm64: dts: meson: g12: fix audio fifo reg size
In reply to Jerome BrunetThe register region size initially is too small to access all the fifo registers.
--- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +6 -6
@@ -1509,7 +1509,7 @@ toddr_a: audio-controller@100 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
@@ -1521,7 +1521,7 @@ toddr_b: audio-controller@140 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
@@ -1533,7 +1533,7 @@ toddr_c: audio-controller@180 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
@@ -1545,7 +1545,7 @@ frddr_a: audio-controller@1c0 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
@@ -1557,7 +1557,7 @@ frddr_b: audio-controller@200 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
@@ -1569,7 +1569,7 @@ frddr_c: audio-controller@240 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
Signature · 1 line
2.21.0
Jerome Brunet
reviewerPATCH 3/5 arm64: dts: meson: g12: add a g12 layer
In reply to Jerome BrunetWhile the sm1 is very close to the g12a/b family, somethings apply differently on the g12a/b and not the sm1. This introduce a new layer of dtsi for part which apply to the g12a and g12b but not the sm1.
--- arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 2 +- 3 files changed, 9 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12.dtsi
arch/arm64/boot/dts/amlogic/meson-g12.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Jerome Brunet <[email protected]> + */ + +#include "meson-g12-common.dtsi"
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +1 -1
@@ -3,7 +3,7 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include "meson-g12-common.dtsi" +#include "meson-g12.dtsi" #include <dt-bindings/power/meson-g12a-power.h> / {
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +1 -1
@@ -4,7 +4,7 @@ * Author: Neil Armstrong <[email protected]> */ -#include "meson-g12-common.dtsi" +#include "meson-g12.dtsi" #include <dt-bindings/power/meson-g12a-power.h> / {
Signature · 1 line
2.21.0
Jerome Brunet
reviewerPATCH 4/5 arm64: dts: meson: g12: factor the power domain.
In reply to Jerome BrunetThe power domain declared in the g12a and g12b dtsi are the same. Move the declaration of these power domains in the g12 common dtsi.
--- arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 13 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 ------------- arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 12 ------------ 3 files changed, 13 insertions(+), 25 deletions(-)
arch/arm64/boot/dts/amlogic/meson-g12.dtsi +13 -0
@@ -5,3 +5,16 @@ */ #include "meson-g12-common.dtsi" +#include <dt-bindings/power/meson-g12a-power.h> + +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; + +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&sd_emmc_a { + amlogic,dram-access-quirk; +};
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +0 -13
@@ -4,7 +4,6 @@ */ #include "meson-g12.dtsi" -#include <dt-bindings/power/meson-g12a-power.h> / { compatible = "amlogic,g12a";
@@ -110,15 +109,3 @@ }; }; }; - -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -};
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +0 -12
@@ -5,7 +5,6 @@ */ #include "meson-g12.dtsi" -#include <dt-bindings/power/meson-g12a-power.h> / { compatible = "amlogic,g12b";
@@ -102,14 +101,3 @@ compatible = "amlogic,g12b-clkc"; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -};
Signature · 1 line
2.21.0
Jerome Brunet
reviewerPATCH 5/5 arm64: dts: meson: g12: move audio bus out of g12-common
In reply to Jerome BrunetThe base address of the audio bus and pdm device are different between the g12 and sm1 SoC families. Overwriting the reg property only would leave with confusing node names on the sm1.
Move the audio related devices to the g12 dtsi. The appropriate nodes will be created for the sm1 later on.
--- .../boot/dts/amlogic/meson-g12-common.dtsi | 320 ----------------- arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 324 ++++++++++++++++++ 2 files changed, 324 insertions(+), 320 deletions(-)
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +0 -320
@@ -5,13 +5,10 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/g12a-clkc.h> #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> / {
@@ -19,39 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - efuse: efuse { compatible = "amlogic,meson-gxbb-efuse"; clocks = <&clkc CLKID_EFUSE>;
@@ -1457,290 +1421,6 @@ }; }; - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - status = "disabled"; - }; - }; - usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>;
arch/arm64/boot/dts/amlogic/meson-g12.dtsi +324 -0
331 lines not on this page · raw message
Signature · 1 line
2.21.0
Kevin Hilman
maintainerQuoted 10 lines · Jerome Brunet
The patchset features a few updates to prepare the addition of the audio on sm1. It fixes the register range of audio fifo which was incorrect.
It also create another layer of dtsi, common to g12a and g12b but not sm1. The audio related device are moved to this file.
This was done because the audio bus, which was at
0xff642000on g12, has moved0xff660000on sm1. Overwriting the reg property was option but it would have left confusing node names on the sm1.
Quoted 6 lines
Jerome Brunet (5):
arm64: dts: meson: axg: fix audio fifo reg size
arm64: dts: meson: g12: fix audio fifo reg size
arm64: dts: meson: g12: add a g12 layer
arm64: dts: meson: g12: factor the power domain.
arm64: dts: meson: g12: move audio bus out of g12-common
Queued for v5.5,
Kevin