Skip to contentSkip to conversation

ARM64: dts: meson: fix register ranges for SD/eMMC

PATCH Superseded Kevin Hilman 1 participant 2 messages Jun 5, 2018 – Jun 8, 2018

Subsystems (2)
Device tree bindings Arm/Amlogic Meson SoC support
lore
Share & tools
lore

Kevin Hilman

author maintainer
#0 lore raw

PATCH v2 1/1 ARM64: dts: meson: fix register ranges for SD/eMMC

Based on updated information from Amlogic, correct the register range for the SD/eMMC blocks to the right size.

Reported-by Yixun Lan <[email protected]>
Tested-by Yixun Lan <[email protected]>
Signed-off-by Kevin Hilman <[email protected]>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi  | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/amlogic/meson-axg.dtsi +2 -2
index fee87737a201..67d7115e4eff 100644
@@ -132,7 +132,7 @@
 
 			sd_emmc_b: sd at 5000 {
 				compatible = "amlogic,meson-axg-mmc";
-				reg = <0x0 0x5000 0x0 0x2000>;
+				reg = <0x0 0x5000 0x0 0x800>;
 				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,

@@ -144,7 +144,7 @@
 
 			sd_emmc_c: mmc at 7000 {
 				compatible = "amlogic,meson-axg-mmc";
-				reg = <0x0 0x7000 0x0 0x2000>;
+				reg = <0x0 0x7000 0x0 0x800>;
 				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
arch/arm64/boot/dts/amlogic/meson-gx.dtsi +3 -3
index 3c31e21cbed7..b003f324ca31 100644
@@ -457,21 +457,21 @@
 
 			sd_emmc_a: mmc at 70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
-				reg = <0x0 0x70000 0x0 0x2000>;
+				reg = <0x0 0x70000 0x0 0x800>;
 				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc at 72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
-				reg = <0x0 0x72000 0x0 0x2000>;
+				reg = <0x0 0x72000 0x0 0x800>;
 				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc at 74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
-				reg = <0x0 0x74000 0x0 0x2000>;
+				reg = <0x0 0x74000 0x0 0x800>;
 				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
Signature · 1 line
2.11.0