arm64: dts: meson: sm1: set gpio interrupt controller compatible
Subsystems (2)
Jerome Brunet
reviewerPATCH 1/1 arm64: dts: meson: sm1: set gpio interrupt controller compatible
Set the appropriate gpio interrupt controller compatible for the sm1 SoC family. This newer version of the controller can now trig irq on both edge of the input signal
--- arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +5 -0
@@ -134,6 +134,11 @@ power-domains = <&pwrc PWRC_SM1_ETH_ID>; }; +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; };
Signature · 1 line
2.21.0
Kevin Hilman
maintainerQuoted 5 lines · Jerome Brunet
Set the appropriate gpio interrupt controller compatible for the sm1 SoC family. This newer version of the controller can now trig irq on both edge of the input signal
Signed-off-by Jerome Brunet <[email protected]>
Queued.
I may do a late round for the dev cycle of v5.4, otherwise this will go for v5.5. If it goes for v5.5, it should probably have a Fixes tag, no?
Kevin
Quoted 22 lines
--- arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 5 +++++ 1 file changed, 5 insertions(+)arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +5
-0@@ -134,6 +134,11 @@ power-domains = <&pwrc PWRC_SM1_ETH_ID>; }; +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; };Signature · 1 line
2.21.0
Jerome Brunet
reviewerQuoted 6 lines · Kevin Hilman
Quoted 4 lines · Jerome Brunet
Set the appropriate gpio interrupt controller compatible for the sm1 SoC family. This newer version of the controller can now trig irq on both edge of the input signal
Quoted 6 lines
Quoted 1 line
Signed-off-by Jerome Brunet <[email protected]>Queued.
I may do a late round for the dev cycle of v5.4, otherwise this will go for v5.5.
No problem
Quoted 1 line
If it goes for v5.5, it should probably have a Fixes tag, no?
Maybe, but then every change to meson-sm1.dtsi would be some kind of fix on what is provided by meson-g12-common.dtsi.
Not sure this really qualify as a fix but I'll do as you prefer, just let me know
Quoted 25 lines
Kevin
Quoted 22 lines
--- arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 5 +++++ 1 file changed, 5 insertions(+)arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +5
-0@@ -134,6 +134,11 @@ power-domains = <&pwrc PWRC_SM1_ETH_ID>; }; +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; };Signature · 1 line
2.21.0