ARM: dts: meson: add a node which describes the SRAM
Subsystems (2)
Martin Blumenstingl
reviewerPATCH 1/1 ARM: dts: meson: add a node which describes the SRAM
All 32bit Meson SoCs contain 128KiB SRAM. This SRAM is used when suspending the device (the the ARM Power Firmware on Meson8/Meson8b/Meson8m2 saves the DDR settings there) and to boot the secondary CPU cores.
Signed-off-by Martin Blumenstingl <[email protected]>
--- arch/arm/boot/dts/meson.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/meson.dtsi +8 -0
@@ -244,5 +244,13 @@ interrupt-names = "macirq"; status = "disabled"; }; + + ahb_sram: sram at d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + }; }; }; /* end of / */
Signature · 1 line
2.13.2
PATCH 1/1 ARM: dts: meson: add a node which describes the SRAM
Quoted 6 lines · Martin Blumenstingl
All 32bit Meson SoCs contain 128KiB SRAM. This SRAM is used when suspending the device (the the ARM Power Firmware on Meson8/Meson8b/Meson8m2 saves the DDR settings there) and to boot the secondary CPU cores.
Signed-off-by Martin Blumenstingl <[email protected]>
Applied to v4.14/dt,
Thanks,
Kevin