omap fixes against v4.3-rc1
The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:
Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.3/fixes-rc1
for you to fetch changes up to 60fdcb8863d9b4a8b6c6b367886fadb50d4c0b07:
ARM: dts: Fixup model name for HP t410 dts (2015-09-14 13:33:47 -0700)
----------------------------------------------------------------
Fixes for omaps against v4.3-rc1:
- Fix long time regression on beagle for tfp410 pin muxing
- Fix dm814x control base address typo and related Ethernet phy configuration
- Fix igepv2 Ethernet pinmuxing as only some boards have it
- Fix pbias regulator compatible values as a pending regulator fix needs those for MMC1 to work properly
- Fix beagle-x15 MMC1 regulator and make pcf857x built-in
- Fix omap5 and dra7 Kconfig options when built as the only SoCs selected
- Fix PM errata for omap5 and dra7 as they too need it
- Fix phycore mpu voltage
Also included are a few cosmetic fixes:
- Remove unused of_irq macros
- Fix dra7 ethernet name
----------------------------------------------------------------
Carl Frederik Werner (1):
ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again
Javier Martinez Canillas (1):
ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi
Kishon Vijay Abraham I (3):
ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node
ARM: dts: Use ti,pbias compatible string for pbias
ARM: omap2plus_defconfig: make PCF857x built-in
Nicolas Chauvet (1):
ARM: dts: Fixup model name for HP t410 dts
Nishanth Menon (5):
ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410
ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well
ARM: OMAP2+: board-generic: Remove stale of_irq macros
ARM: DRA7: Select missing options for SoC only build
ARM: OMAP5: Cleanup options for SoC only build
Teresa Remmet (1):
ARM: dts: am335x-phycore-som: Fix mpu voltage
Tony Lindgren (1):
ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY
Vishal Mahaveer (1):
ARM: dts: DRA7: fix a typo in ethernet
arch/arm/boot/dts/am335x-phycore-som.dtsi | 4 ++-- arch/arm/boot/dts/am57xx-beagle-x15.dts | 4 ++-- arch/arm/boot/dts/dm8148-evm.dts | 4 ++-- arch/arm/boot/dts/dm8148-t410.dts | 6 +++--- arch/arm/boot/dts/dm814x.dtsi | 8 ++++---- arch/arm/boot/dts/dra7.dtsi | 4 ++-- arch/arm/boot/dts/omap2430.dtsi | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-igep.dtsi | 6 ------ arch/arm/boot/dts/omap3-igep0020-common.dtsi | 6 ++++++ arch/arm/boot/dts/omap3.dtsi | 2 +- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/boot/dts/omap5.dtsi | 2 +- arch/arm/configs/omap2plus_defconfig | 2 +- arch/arm/mach-omap2/Kconfig | 6 +++++- arch/arm/mach-omap2/board-generic.c | 7 ------- arch/arm/mach-omap2/pm.h | 3 ++- 17 files changed, 34 insertions(+), 36 deletions(-)
Quoted 3 lines · Tony Lindgren
- Fix pbias regulator compatible values as a pending regulator fix needs those for MMC1 to work properly
And when the pbias regulator fix hits mainline, I'll send one more pull request to correct the reg entries for pbias for the MMC hassles. Here's a summary FYI:
http://article.gmane.org/gmane.linux.kernel.mmc/33911
Regards,
Tony
Quoted 34 lines · Tony Lindgren
The following changes since commit
6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omaptags/omap-for-v4.3/fixes-rc1for you to fetch changes up to
60fdcb8863d9b4a8b6c6b367886fadb50d4c0b07:ARM: dts: Fixup model name for HP t410 dts (2015-09-14 13:33:47 -0700)
----------------------------------------------------------------
Fixes for omaps against v4.3-rc1:- Fix long time regression on beagle for tfp410 pin muxing
- Fix dm814x control base address typo and related Ethernet phy configuration
- Fix igepv2 Ethernet pinmuxing as only some boards have it
- Fix pbias regulator compatible values as a pending regulator fix needs those for MMC1 to work properly
- Fix beagle-x15 MMC1 regulator and make pcf857x built-in
- Fix omap5 and dra7
Kconfigoptions when built as the only SoCs selected- Fix PM errata for omap5 and dra7 as they too need it
- Fix phycore mpu voltage
Quoted 7 lines
Also included are a few cosmetic fixes:
- Remove unused
of_irqmacros- Fix dra7 ethernet name
----------------------------------------------------------------
Thanks, pulled into fixes.
Kevin