Skip to contentSkip to conversation

ARM: ux500: disable msp2 device tree node

PATCH New Linus Walleij 2 participants 2 messages Feb 11, 2014 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: ux500: disable msp2 device tree node

Commit 70b41abc151f9
"ARM: ux500: move MSP pin control to the device tree" accidentally activated MSP2, giving rise to a boot scroll scream as the kernel attempts to probe a driver for it and fails to obtain DMA channel 14.

Fix this up by marking the node disabled again.

---
Hi ARM SoC guys, can you please apply this patch directly for fixes, there is no point to send a pull request with a single patch in it.

---
 arch/arm/boot/dts/ste-href.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/ste-href.dtsi +0 -1
index 0c1e8d871ed1..6cb9b68e2188 100644
@@ -188,7 +188,6 @@
 		msp2: msp at 80117000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
 		};
 
 		msp3: msp at 80125000 {
Signature · 1 line
1.8.5.3
Applied
#1 lore raw

PATCH 1/1 ARM: ux500: disable msp2 device tree node

Quoted 6 lines · Linus Walleij

Commit 70b41abc151f9
"ARM: ux500: move MSP pin control to the device tree" accidentally activated MSP2, giving rise to a boot scroll scream as the kernel attempts to probe a driver for it and fails to obtain DMA channel 14.

Quoted 8 lines

Fix this up by marking the node disabled again.

---
Hi ARM SoC guys, can you please apply this patch directly for fixes, there is no point to send a pull request with a single patch in it.

Applied to fixes,

Kevin