dir: do all size checks before seeking back and fix file closing
PATCH 1/1 dir: do all size checks before seeking back and fix file closing
--- dir.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
dir.c +2 -2
@@ -122,11 +122,11 @@ static int add_excludes_from_file_1(cons size =lseek (fd,0 ,SEEK_END );if (size <0 ) goto err; -lseek (fd,0 ,SEEK_SET );if (size ==0 ) {close (fd);return 0 ; } +lseek (fd,0 ,SEEK_SET ); buf =xmalloc (size+1 );if (read (fd, buf, size) != size) goto err;
@@ -146,7 +146,7 @@ static int add_excludes_from_file_1(consreturn 0 ; err: -if (0 <= fd) +if (0 >= fd)close (fd);return -1 ; }
Signature · 4 lines
1.4.2.GIT -- Jonas Fonseca
dir.c static int add_excludes_from_file_1(cons · line 150
Quoted 4 lines · Jonas Fonseca
err:
dir.c +1
-1-if (0 <= fd) +if (0 >= fd)close (fd);
Could you explain that piece? You now only close "fd" if it's zero (stdin) or negative (invalid). The old code (close if its >=0) make more sense.
-Mitch
Mitchell Blank Jr <[email protected]> wrote Sat, Aug 26, 2006:
Quoted 8 lines
dir.c static int add_excludes_from_file_1(cons · line 150
Quoted 4 lines · Jonas Fonseca
err:
dir.c +1
-1-if (0 <= fd) +if (0 >= fd)close (fd);Could you explain that piece? You now only close "fd" if it's zero (stdin) or negative (invalid). The old code (close if its >=0) make more sense.
Ah, yes, sorry for the noise. I read the old code as (fd <= 0).
Signature · 1 line
Jonas Fonseca
Quoted 6 lines · Jonas Fonseca
dir.c +0
-0
dir.c static int add_excludes_from_file_1(cons · line 129
Quoted 9 lines
dir.c +1
-1@@ -122,11 +122,11 @@ static int add_excludes_from_file_1(cons size =lseek (fd,0 ,SEEK_END );if (size <0 ) goto err; -lseek (fd,0 ,SEEK_SET );if (size ==0 ) {close (fd);return 0 ; } +lseek (fd,0 ,SEEK_SET );
I really think you'd be better off rewriting that to use "fstat()" instead. I don't know why it uses two lseek's, but it's wrong, and looks like some bad habit Junio picked up at some point.
dir.c static int add_excludes_from_file_1(cons · line 150
Quoted 7 lines
dir.c +1
-1@@ -146,7 +146,7 @@ static int add_excludes_from_file_1(consreturn 0 ; err: -if (0 <= fd) +if (0 >= fd)close (fd);
That's wrong.
Now, admittedly it's wrong because another bad habit Junio picked up (doing comparisons with constants in the wrong order), so please write it as
if (fd >= 0) close(fd);
instead.
Junio: I realize that you claim that you learnt that syntax from an authorative source, but he was _wrong_. Doing the constant first is more likely to cause bugs, rather than less. Compilers will warn about the
if (x = 0) ..
kind of bug, and putting the constant first just confuses humans.
It's more important to _not_ confuse humans than it is to try to avoid an uncommon error that compilers can and do warn about anyway.
Linus
Quoted 3 lines · Linus Torvalds
I really think you'd be better off rewriting that to use "
fstat()" instead. I don't know why it uses two lseek's, but it's wrong, and looks like some bad habit Junio picked up at some point.
I think the code was written to avoid getting confused by unseekable input (pipes) but was done in early morning before the first shot of caffeine.
Quoted 2 lines
Now, admittedly it's wrong because another bad habit Junio picked up (doing comparisons with constants in the wrong order)
I think you misunderstand the rationale used to encourage the comparison used there. It does not have anything to do with having comparison on the left.
The comparison order is done in textual order. You list smaller things on the left and then larger things on the right (iow, you almost never use >= or >).
Quoted 2 lines
Junio: I realize that you claim that you learnt that syntax from an authorative source, but he was _wrong_....
This does not come from any authoritative source, but I picked it up because I felt it made a lot of sense.
Quoted 2 lines
... Doing the constant first is more likely to cause bugs, rather than less.
That's a funny thing to say, because I was about to send out a comment that touches this exact topic.
I spotted the bug the patch was trying to introduce right away _because_ the original comparison was written in textual order.
The patch changed the comparison operator which first confused me for a handful seconds, and then after I swapped everything in my head to read as
if (fd <= 0)
close(fd);it became blatantly obvious it was a bogus change. In the message I was about to send out, I would have said "a fine example that using texual order comparison consistently avoids bugs". So it is really relative to what you are used to.
Get used to it, please ;-).
Quoted 8 lines · Junio C Hamano
Quoted 2 lines · Linus Torvalds
Now, admittedly it's wrong because another bad habit Junio picked up (doing comparisons with constants in the wrong order)
I think you misunderstand the rationale used to encourage the comparison used there. It does not have anything to do with having comparison on the left.
s/comparison/constant/; I cannot spell.
Quoted 11 lines · Junio C Hamano
Quoted 3 lines
Now, admittedly it's wrong because another bad habit Junio picked up (doing comparisons with constants in the wrong order)
I think you misunderstand the rationale used to encourage the comparison used there. It does not have anything to do with having comparison on the left.
The comparison order is done in textual order. You list smaller things on the left and then larger things on the right (iow, you almost never use >= or >).
Ahh. A number of people do the "0 == x" thing, because they want to be caught if they use "=" instead of "==" by mistake. I thought it was the same thing.
Quoted 2 lines
This does not come from any authoritative source, but I picked it up because I felt it made a lot of sense.
To anybody who has _ever_ done any math at all, it makes no sense at all.
You _always_ put constants on the right-hand side (or, possibly last on the left-hand side, in order to make the right-hand side be "0").
Similarly, if you say it out loud, you'd always say "if 'x' is larger than or equal to zero", not "if zero is smaller or less than 'x'". That's because "zero" obviously never varies, so you'd never talk about "zero" being compared to anything else.
The only exception would be the mathematical "0 < x < 10" kind of thing, which some languages (not C, of course) allows in that form. I can imagine that people would just do that as "0 < x && x < 10" just to keep the C form as close to the mathematical form, although I would at least personally do it as
if (x > 0 && x < 10)
especially if I ever needed to write it that way on multiple lines due to some of the expressions being more complicated.
Linus
Quoted 7 lines · Linus Torvalds
Quoted 3 lines
The comparison order is done in textual order. You list smaller things on the left and then larger things on the right (iow, you almost never use >= or >).
Ahh. A number of people do the "0 == x" thing, because they want to be caught if they use "=" instead of "==" by mistake. I thought it was the same thing.
The rest is repeating what you said 15 months ago, so I did not quote that part, but interested parties can follow this thread:
http://thread.gmane.org/gmane.comp.version-control.git/3907/focus=4126
PATCH 1/1 Use fstat instead of fseek
In reply to Junio C Hamano---
dir.c | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-)
Junio C Hamano <[email protected]> wrote Sat, Aug 26, 2006:
Quoted 9 lines
Quoted 3 lines · Linus Torvalds
I really think you'd be better off rewriting that to use "
fstat()" instead. I don't know why it uses two lseek's, but it's wrong, and looks like some bad habit Junio picked up at some point.I think the code was written to avoid getting confused by unseekable input (pipes) but was done in early morning before the first shot of caffeine.
I take it that you want this change, so here's a little addition to the "use X instead of Y" series.
dir.c +3 -5
@@ -112,17 +112,15 @@ static int add_excludes_from_file_1(consint baselen, struct exclude_list *which) { + struct stat st;int fd, i;long size;char *buf, *entry; fd =open (fname,O_RDONLY ); -if (fd <0 ) +if (fd <0 ||fstat (fd, &st) <0 ) goto err; - size =lseek (fd,0 ,SEEK_END ); -if (size <0 ) - goto err; -lseek (fd,0 ,SEEK_SET ); + size = st.st_size;if (size ==0 ) {close (fd);return 0 ;
Signature · 4 lines
1.4.2.g2f76-dirty -- Jonas Fonseca
Quoted 9 lines · Linus Torvalds
Now, admittedly it's wrong because another bad habit Junio picked up (doing comparisons with constants in the wrong order), so please write it as
if (fd >= 0)
close(fd);instead.
Quoted 8 lines
Junio: I realize that you claim that you learnt that syntax from an authorative source, but he was _wrong_. Doing the constant first is more likely to cause bugs, rather than less. Compilers will warn about the
if (x = 0)
..kind of bug, and putting the constant first just confuses humans.
Well, perhaps except checking if variable is in given range, e.g.
if (0 <= x && x <= 5)
Quoted 2 lines
It's more important to _not_ confuse humans than it is to try to avoid an uncommon error that compilers can and do warn about anyway.
Signature · 3 lines
Jakub Narebski Warsaw, Poland ShadeHawk on #git