Skip to contentSkip to conversation

drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF

PATCH In review Rodrigo Vivi 5 participants 15 messages May 27 – Jun 10

Subsystems (2)
lore
Share & tools
lore

Rodrigo Vivi

author maintainer
#0 lore raw

PATCH 1/1 drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.
- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model. The public xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +101 -22
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;
 	/** @access_count: counts GGTT writes */
 	unsigned int access_count;
 	/** @wq: Dedicated unordered work queue to process node removals */
@@ -318,6 +329,10 @@ static void ggtt_fini_early(struct drm_device *drm, void *arg)
 {
 	struct xe_ggtt *ggtt = arg;
 
+	if (drm_mm_node_allocated(&ggtt->reserved_top))
+		drm_mm_remove_node(&ggtt->reserved_top);
+	if (drm_mm_node_allocated(&ggtt->reserved_bottom))
+		drm_mm_remove_node(&ggtt->reserved_bottom);
 	destroy_workqueue(ggtt->wq);
 	drm_mm_takedown(&ggtt->mm);
 }
@@ -354,16 +369,66 @@ static const struct xe_ggtt_pt_ops xelpg_pt_wa_ops = {
 	.ggtt_get_pte = xe_ggtt_get_pte,
 };
 
-static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size)
+/*
+ * __xe_ggtt_init_early - Generic drm_mm initialisation for both PF and VF.
+ *
+ * @start and @size define the usable GGTT range exposed through the public API.
+ * @mm_offset is added to every drm_mm node address to obtain the hardware
+ * address (0 for PF where the drm_mm spans real addresses; @start for VF).
+ * @mm_size is the total span passed to drm_mm_init() (equals @size for VF;
+ * equals the full hardware GGTT size for PF).
+ */
+static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size,
+				 u64 mm_offset, u64 mm_size)
 {
 	ggtt->start = start;
 	ggtt->size = size;
-	drm_mm_init(&ggtt->mm, 0, size);
+	ggtt->mm_offset = mm_offset;
+	drm_mm_init(&ggtt->mm, 0, mm_size);
+}
+
+/*
+ * __xe_ggtt_reserve_pf_nodes - Permanently reserve the forbidden GGTT zones.
+ *
+ * Must be called after __xe_ggtt_init_early() for the PF case.  Reserves
+ * [0, @wopcm) and [@guc_top, @total_size) so the allocator never hands them
+ * out.  On failure the drm_mm is torn down and the error is returned.
+ */
+static int __xe_ggtt_reserve_pf_nodes(struct xe_ggtt *ggtt, u64 wopcm,
+				      u64 guc_top, u64 total_size)
+{
+	int err;
+
+	/* Reserve [0, wopcm) — GuC cannot access below WOPCM */
+	if (wopcm > 0) {
+		ggtt->reserved_bottom.start = 0;
+		ggtt->reserved_bottom.size = wopcm;
+		err = drm_mm_reserve_node(&ggtt->mm, &ggtt->reserved_bottom);
+		if (WARN_ON(err))
+			goto err_takedown;
+	}
+
+	/* Reserve [guc_top, total_size) — GuC cannot access above GUC_GGTT_TOP */
+	if (guc_top < total_size) {
+		ggtt->reserved_top.start = guc_top;
+		ggtt->reserved_top.size = total_size - guc_top;
+		err = drm_mm_reserve_node(&ggtt->mm, &ggtt->reserved_top);
+		if (WARN_ON(err))
+			goto err_remove_bottom;
+	}
+
+	return 0;
+
+err_remove_bottom:
+	drm_mm_remove_node(&ggtt->reserved_bottom);
+err_takedown:
+	drm_mm_takedown(&ggtt->mm);
+	return err;
 }
 
 int xe_ggtt_init_kunit(struct xe_ggtt *ggtt, u32 start, u32 size)
 {
-	__xe_ggtt_init_early(ggtt, start, size);
+	__xe_ggtt_init_early(ggtt, start, size, start, size);
 	return 0;
 }
 EXPORT_SYMBOL_IF_KUNIT(xe_ggtt_init_kunit);
@@ -405,8 +470,13 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 			xe_tile_err(ggtt->tile, "Hardware reported no preallocated GSM\n");
 			return -ENOMEM;
 		}
+		/*
+		 * For PF, ggtt_size holds the full hardware GGTT size. The
+		 * WOPCM and GUC_GGTT_TOP limits are enforced via permanently
+		 * reserved drm_mm nodes rather than by capping the range.
+		 */
 		ggtt_start = wopcm;
-		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE - ggtt_start;
+		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE;
 	} else {
 		ggtt_start = xe_tile_sriov_vf_ggtt_base(ggtt->tile);
 		ggtt_size = xe_tile_sriov_vf_ggtt(ggtt->tile);
@@ -423,9 +493,6 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 	if (IS_DGFX(xe) && xe->info.vram_flags & XE_VRAM_FLAGS_NEED64K)
 		ggtt->flags |= XE_GGTT_FLAGS_64K;
 
-	if (ggtt_size + ggtt_start > GUC_GGTT_TOP)
-		ggtt_size = GUC_GGTT_TOP - ggtt_start;
-
 	if (GRAPHICS_VERx100(xe) >= 1270)
 		ggtt->pt_ops =
 			(ggtt->tile->media_gt && XE_GT_WA(ggtt->tile->media_gt, 22019338487)) ||
@@ -438,7 +505,19 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 	if (!ggtt->wq)
 		return -ENOMEM;
 
-	__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size);
+	if (!IS_SRIOV_VF(xe)) {
+		__xe_ggtt_init_early(ggtt, ggtt_start, GUC_GGTT_TOP - ggtt_start,
+				     0, ggtt_size);
+		err = __xe_ggtt_reserve_pf_nodes(ggtt, ggtt_start, GUC_GGTT_TOP,
+						 ggtt_size);
+		if (err) {
+			destroy_workqueue(ggtt->wq);
+			return err;
+		}
+	} else {
+		__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size,
+				     ggtt_start, ggtt_size);
+	}
 
 	err = drmm_add_action_or_reset(&xe->drm, ggtt_fini_early, ggtt);
 	if (err)
@@ -459,7 +538,7 @@ static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
 	/* Display may have allocated inside ggtt, so be careful with clearing here */
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(hole, &ggtt->mm, start, end)
-		xe_ggtt_clear(ggtt, ggtt->start + start, end - start);
+		xe_ggtt_clear(ggtt, ggtt->mm_offset + start, end - start);
 
 	xe_ggtt_invalidate(ggtt);
 	mutex_unlock(&ggtt->lock);
@@ -613,6 +692,7 @@ void xe_ggtt_shift_nodes(struct xe_ggtt *ggtt, u64 new_start)
 
 	/* pairs with READ_ONCE in xe_ggtt_node_addr() */
 	WRITE_ONCE(ggtt->start, new_start);
+	WRITE_ONCE(ggtt->mm_offset, new_start);
 }
 
 static int xe_ggtt_insert_node_locked(struct xe_ggtt_node *node,
@@ -815,20 +895,19 @@ static int __xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
 
 	mutex_lock(&ggtt->lock);
 	/*
-	 * When inheriting the initial framebuffer, the framebuffer is
-	 * physically located at VRAM address 0, and usually at GGTT address 0 too.
-	 *
-	 * The display code will ask for a GGTT allocation between end of BO and
-	 * remainder of GGTT, unaware that the start is reserved by WOPCM.
+	 * Convert caller-supplied hardware GGTT addresses to drm_mm-relative
+	 * coordinates. For PF mm_offset is 0 so this is a no-op; callers pass
+	 * real addresses and the reserved_bottom/top nodes prevent allocations
+	 * in the forbidden regions. For VF, mm_offset equals the VF base so
+	 * we convert to relative drm_mm space.
 	 */
-	if (start >= ggtt->start)
-		start -= ggtt->start;
+	if (start >= ggtt->mm_offset)
+		start -= ggtt->mm_offset;
 	else
 		start = 0;
 
-	/* Should never happen, but since we handle start, fail graciously for end */
-	if (end >= ggtt->start)
-		end -= ggtt->start;
+	if (end >= ggtt->mm_offset)
+		end -= ggtt->mm_offset;
 	else
 		end = 0;
 
@@ -923,7 +1002,7 @@ u64 xe_ggtt_largest_hole(struct xe_ggtt *ggtt, u64 alignment, u64 *spare)
 
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
-		hole_start = max(hole_start, ggtt->start);
+		hole_start = max(hole_start, ggtt->mm_offset);
 		hole_start = ALIGN(hole_start, alignment);
 		hole_end = ALIGN_DOWN(hole_end, alignment);
 		if (hole_start >= hole_end)
@@ -1098,7 +1177,7 @@ u64 xe_ggtt_print_holes(struct xe_ggtt *ggtt, u64 alignment, struct drm_printer
 
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
-		hole_start = max(hole_start, ggtt->start);
+		hole_start = max(hole_start, ggtt->mm_offset);
 		hole_start = ALIGN(hole_start, alignment);
 		hole_end = ALIGN_DOWN(hole_end, alignment);
 		if (hole_start >= hole_end)
@@ -1152,7 +1231,7 @@ u64 xe_ggtt_read_pte(struct xe_ggtt *ggtt, u64 offset)
 u64 xe_ggtt_node_addr(const struct xe_ggtt_node *node)
 {
 	/* pairs with WRITE_ONCE in xe_ggtt_shift_nodes() */
-	return node->base.start + READ_ONCE(node->ggtt->start);
+	return node->base.start + READ_ONCE(node->ggtt->mm_offset);
 }
 
 /**
Signature · 1 line
2.54.0
#1 lore raw

✗ i915.CI.BAT: failure for drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF

== Series Details ==

== Series Details ==

Series: drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF
URL : https://patchwork.freedesktop.org/series/167392/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_18561 -> Patchwork_167392v1
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_167392v1 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes
introduced in Patchwork_167392v1, please notify your bug team ([email protected]) to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_167392v1/index.html

Participating hosts (42 -> 40)
------------------------------

Missing (2): bat-dg2-13 fi-snb-2520m

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_167392v1:

### IGT changes ###

#### Possible regressions ####

* igt@i915_module_load@load:
- bat-apl-1: [PASS][1] -> [DMESG-WARN][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_18561/bat-apl-1/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_167392v1/bat-apl-1/igt@[email protected]

Known issues
------------

Here are the changes found in Patchwork_167392v1 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@core_debugfs@read-all-entries:
- bat-adlp-6: [PASS][3] -> [DMESG-WARN][4] ([i915#15673])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_18561/bat-adlp-6/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_167392v1/bat-adlp-6/igt@[email protected]

#### Possible fixes ####

* igt@core_auth@basic-auth:
- bat-adlp-6: [DMESG-WARN][5] ([i915#15673]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_18561/bat-adlp-6/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_167392v1/bat-adlp-6/igt@[email protected]

[i915#15673]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15673

Build changes
-------------

* Linux: CI_DRM_18561 -> Patchwork_167392v1

CI-20190529: 20190529
CI_DRM_18561: 5390f2273d45bb259d88508828018c0fbbb79d32 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_8938: b024a3b67372962ff6e643d3998c5cf5acc07081 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_167392v1: 5390f2273d45bb259d88508828018c0fbbb79d32 @ git://anongit.freedesktop.org/gfx-ci/linux

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_167392v1/index.html

#2 lore raw

✓ CI.KUnit: success for drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF
URL : https://patchwork.freedesktop.org/series/167391/
State : success

== Summary ==

+ trap cleanup EXIT
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/xe/.kunitconfig [17:40:47] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[17:40:52] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[17:41:23] Starting KUnit Kernel (1/1)...
[17:41:23] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[17:41:23] ================== guc_buf (11 subtests) ===================
[17:41:23] [PASSED] test_smallest
[17:41:23] [PASSED] test_largest
[17:41:23] [PASSED] test_granular
[17:41:23] [PASSED] test_unique
[17:41:23] [PASSED] test_overlap
[17:41:23] [PASSED] test_reusable
[17:41:23] [PASSED] test_too_big
[17:41:23] [PASSED] test_flush
[17:41:23] [PASSED] test_lookup
[17:41:23] [PASSED] test_data
[17:41:23] [PASSED] test_class
[17:41:23] ===================== [PASSED] guc_buf =====================
[17:41:23] =================== guc_dbm (7 subtests) ===================
[17:41:23] [PASSED] test_empty
[17:41:23] [PASSED] test_default
[17:41:23] ======================== test_size  ========================
[17:41:23] [PASSED] 4
[17:41:23] [PASSED] 8
[17:41:23] [PASSED] 32
[17:41:23] [PASSED] 256
[17:41:23] ==================== [PASSED] test_size ====================
[17:41:23] ======================= test_reuse  ========================
[17:41:23] [PASSED] 4
[17:41:23] [PASSED] 8
[17:41:23] [PASSED] 32
[17:41:23] [PASSED] 256
[17:41:23] =================== [PASSED] test_reuse ====================
[17:41:23] =================== test_range_overlap  ====================
[17:41:23] [PASSED] 4
[17:41:23] [PASSED] 8
[17:41:23] [PASSED] 32
[17:41:23] [PASSED] 256
[17:41:23] =============== [PASSED] test_range_overlap ================
[17:41:23] =================== test_range_compact  ====================
[17:41:23] [PASSED] 4
[17:41:23] [PASSED] 8
[17:41:23] [PASSED] 32
[17:41:23] [PASSED] 256
[17:41:23] =============== [PASSED] test_range_compact ================
[17:41:23] ==================== test_range_spare  =====================
[17:41:23] [PASSED] 4
[17:41:23] [PASSED] 8
[17:41:23] [PASSED] 32
[17:41:23] [PASSED] 256
[17:41:23] ================ [PASSED] test_range_spare =================
[17:41:23] ===================== [PASSED] guc_dbm =====================
[17:41:23] =================== guc_idm (6 subtests) ===================
[17:41:23] [PASSED] bad_init
[17:41:23] [PASSED] no_init
[17:41:23] [PASSED] init_fini
[17:41:23] [PASSED] check_used
[17:41:23] [PASSED] check_quota
[17:41:23] [PASSED] check_all
[17:41:23] ===================== [PASSED] guc_idm =====================
[17:41:23] ================== no_relay (3 subtests) ===================
[17:41:23] [PASSED] xe_drops_guc2pf_if_not_ready
[17:41:23] [PASSED] xe_drops_guc2vf_if_not_ready
[17:41:23] [PASSED] xe_rejects_send_if_not_ready
[17:41:23] ==================== [PASSED] no_relay =====================
[17:41:23] ================== pf_relay (14 subtests) ==================
[17:41:23] [PASSED] pf_rejects_guc2pf_too_short
[17:41:23] [PASSED] pf_rejects_guc2pf_too_long
[17:41:23] [PASSED] pf_rejects_guc2pf_no_payload
[17:41:23] [PASSED] pf_fails_no_payload
[17:41:23] [PASSED] pf_fails_bad_origin
[17:41:23] [PASSED] pf_fails_bad_type
[17:41:23] [PASSED] pf_txn_reports_error
[17:41:23] [PASSED] pf_txn_sends_pf2guc
[17:41:23] [PASSED] pf_sends_pf2guc
[17:41:23] [SKIPPED] pf_loopback_nop
[17:41:23] [SKIPPED] pf_loopback_echo
[17:41:23] [SKIPPED] pf_loopback_fail
[17:41:23] [SKIPPED] pf_loopback_busy
[17:41:23] [SKIPPED] pf_loopback_retry
[17:41:23] ==================== [PASSED] pf_relay =====================
[17:41:23] ================== vf_relay (3 subtests) ===================
[17:41:23] [PASSED] vf_rejects_guc2vf_too_short
[17:41:23] [PASSED] vf_rejects_guc2vf_too_long
[17:41:23] [PASSED] vf_rejects_guc2vf_no_payload
[17:41:23] ==================== [PASSED] vf_relay =====================
[17:41:23] ================ pf_gt_config (9 subtests) =================
[17:41:23] [PASSED] fair_contexts_1vf
[17:41:23] [PASSED] fair_doorbells_1vf
[17:41:23] [PASSED] fair_ggtt_1vf
[17:41:23] ====================== fair_vram_1vf  ======================
[17:41:23] [PASSED] 3.50 GiB
[17:41:23] [PASSED] 11.5 GiB
[17:41:23] [PASSED] 15.5 GiB
[17:41:23] [PASSED] 31.5 GiB
[17:41:23] [PASSED] 63.5 GiB
[17:41:23] [PASSED] 1.91 GiB
[17:41:23] ================== [PASSED] fair_vram_1vf ==================
[17:41:23] ================ fair_vram_1vf_admin_only  =================
[17:41:23] [PASSED] 3.50 GiB
[17:41:23] [PASSED] 11.5 GiB
[17:41:23] [PASSED] 15.5 GiB
[17:41:23] [PASSED] 31.5 GiB
[17:41:23] [PASSED] 63.5 GiB
[17:41:23] [PASSED] 1.91 GiB
[17:41:23] ============ [PASSED] fair_vram_1vf_admin_only =============
[17:41:23] ====================== fair_contexts  ======================
[17:41:23] [PASSED] 1 VF
[17:41:23] [PASSED] 2 VFs
[17:41:23] [PASSED] 3 VFs
[17:41:23] [PASSED] 4 VFs
[17:41:23] [PASSED] 5 VFs
[17:41:23] [PASSED] 6 VFs
[17:41:23] [PASSED] 7 VFs
[17:41:23] [PASSED] 8 VFs
[17:41:23] [PASSED] 9 VFs
[17:41:23] [PASSED] 10 VFs
[17:41:23] [PASSED] 11 VFs
[17:41:23] [PASSED] 12 VFs
[17:41:23] [PASSED] 13 VFs
[17:41:23] [PASSED] 14 VFs
[17:41:23] [PASSED] 15 VFs
[17:41:23] [PASSED] 16 VFs
[17:41:23] [PASSED] 17 VFs
[17:41:23] [PASSED] 18 VFs
[17:41:23] [PASSED] 19 VFs
[17:41:23] [PASSED] 20 VFs
[17:41:23] [PASSED] 21 VFs
[17:41:23] [PASSED] 22 VFs
[17:41:23] [PASSED] 23 VFs
[17:41:23] [PASSED] 24 VFs
[17:41:23] [PASSED] 25 VFs
[17:41:23] [PASSED] 26 VFs
[17:41:23] [PASSED] 27 VFs
[17:41:23] [PASSED] 28 VFs
[17:41:23] [PASSED] 29 VFs
[17:41:23] [PASSED] 30 VFs
[17:41:23] [PASSED] 31 VFs
[17:41:23] [PASSED] 32 VFs
[17:41:23] [PASSED] 33 VFs
[17:41:23] [PASSED] 34 VFs
[17:41:23] [PASSED] 35 VFs
[17:41:23] [PASSED] 36 VFs
[17:41:23] [PASSED] 37 VFs
[17:41:23] [PASSED] 38 VFs
[17:41:23] [PASSED] 39 VFs
[17:41:23] [PASSED] 40 VFs
[17:41:23] [PASSED] 41 VFs
[17:41:23] [PASSED] 42 VFs
[17:41:23] [PASSED] 43 VFs
[17:41:23] [PASSED] 44 VFs
[17:41:23] [PASSED] 45 VFs
[17:41:23] [PASSED] 46 VFs
[17:41:23] [PASSED] 47 VFs
[17:41:23] [PASSED] 48 VFs
[17:41:23] [PASSED] 49 VFs
[17:41:23] [PASSED] 50 VFs
[17:41:23] [PASSED] 51 VFs
[17:41:23] [PASSED] 52 VFs
[17:41:23] [PASSED] 53 VFs
[17:41:23] [PASSED] 54 VFs
[17:41:23] [PASSED] 55 VFs
[17:41:23] [PASSED] 56 VFs
[17:41:23] [PASSED] 57 VFs
[17:41:23] [PASSED] 58 VFs
[17:41:23] [PASSED] 59 VFs
[17:41:23] [PASSED] 60 VFs
[17:41:23] [PASSED] 61 VFs
[17:41:23] [PASSED] 62 VFs
[17:41:23] [PASSED] 63 VFs
[17:41:23] ================== [PASSED] fair_contexts ==================
[17:41:23] ===================== fair_doorbells  ======================
[17:41:23] [PASSED] 1 VF
[17:41:23] [PASSED] 2 VFs
[17:41:23] [PASSED] 3 VFs
[17:41:23] [PASSED] 4 VFs
[17:41:23] [PASSED] 5 VFs
[17:41:23] [PASSED] 6 VFs
[17:41:23] [PASSED] 7 VFs
[17:41:23] [PASSED] 8 VFs
[17:41:23] [PASSED] 9 VFs
[17:41:23] [PASSED] 10 VFs
[17:41:23] [PASSED] 11 VFs
[17:41:23] [PASSED] 12 VFs
[17:41:23] [PASSED] 13 VFs
[17:41:23] [PASSED] 14 VFs
[17:41:23] [PASSED] 15 VFs
[17:41:23] [PASSED] 16 VFs
[17:41:23] [PASSED] 17 VFs
[17:41:23] [PASSED] 18 VFs
[17:41:23] [PASSED] 19 VFs
[17:41:23] [PASSED] 20 VFs
[17:41:23] [PASSED] 21 VFs
[17:41:23] [PASSED] 22 VFs
[17:41:23] [PASSED] 23 VFs
[17:41:23] [PASSED] 24 VFs
[17:41:23] [PASSED] 25 VFs
[17:41:23] [PASSED] 26 VFs
[17:41:23] [PASSED] 27 VFs
[17:41:23] [PASSED] 28 VFs
[17:41:23] [PASSED] 29 VFs
[17:41:23] [PASSED] 30 VFs
[17:41:23] [PASSED] 31 VFs
[17:41:23] [PASSED] 32 VFs
[17:41:23] [PASSED] 33 VFs
[17:41:23] [PASSED] 34 VFs
[17:41:23] [PASSED] 35 VFs
[17:41:23] [PASSED] 36 VFs
[17:41:23] [PASSED] 37 VFs
[17:41:23] [PASSED] 38 VFs
[17:41:23] [PASSED] 39 VFs
[17:41:23] [PASSED] 40 VFs
[17:41:23] [PASSED] 41 VFs
[17:41:23] [PASSED] 42 VFs
[17:41:23] [PASSED] 43 VFs
[17:41:23] [PASSED] 44 VFs
[17:41:23] [PASSED] 45 VFs
[17:41:23] [PASSED] 46 VFs
[17:41:23] [PASSED] 47 VFs
[17:41:23] [PASSED] 48 VFs
[17:41:23] [PASSED] 49 VFs
[17:41:24] [PASSED] 50 VFs
[17:41:24] [PASSED] 51 VFs
[17:41:24] [PASSED] 52 VFs
[17:41:24] [PASSED] 53 VFs
[17:41:24] [PASSED] 54 VFs
[17:41:24] [PASSED] 55 VFs
[17:41:24] [PASSED] 56 VFs
[17:41:24] [PASSED] 57 VFs
[17:41:24] [PASSED] 58 VFs
[17:41:24] [PASSED] 59 VFs
[17:41:24] [PASSED] 60 VFs
[17:41:24] [PASSED] 61 VFs
[17:41:24] [PASSED] 62 VFs
[17:41:24] [PASSED] 63 VFs
[17:41:24] ================= [PASSED] fair_doorbells ==================
[17:41:24] ======================== fair_ggtt  ========================
[17:41:24] [PASSED] 1 VF
[17:41:24] [PASSED] 2 VFs
[17:41:24] [PASSED] 3 VFs
[17:41:24] [PASSED] 4 VFs
[17:41:24] [PASSED] 5 VFs
[17:41:24] [PASSED] 6 VFs
[17:41:24] [PASSED] 7 VFs
[17:41:24] [PASSED] 8 VFs
[17:41:24] [PASSED] 9 VFs
[17:41:24] [PASSED] 10 VFs
[17:41:24] [PASSED] 11 VFs
[17:41:24] [PASSED] 12 VFs
[17:41:24] [PASSED] 13 VFs
[17:41:24] [PASSED] 14 VFs
[17:41:24] [PASSED] 15 VFs
[17:41:24] [PASSED] 16 VFs
[17:41:24] [PASSED] 17 VFs
[17:41:24] [PASSED] 18 VFs
[17:41:24] [PASSED] 19 VFs
[17:41:24] [PASSED] 20 VFs
[17:41:24] [PASSED] 21 VFs
[17:41:24] [PASSED] 22 VFs
[17:41:24] [PASSED] 23 VFs
[17:41:24] [PASSED] 24 VFs
[17:41:24] [PASSED] 25 VFs
[17:41:24] [PASSED] 26 VFs
[17:41:24] [PASSED] 27 VFs
[17:41:24] [PASSED] 28 VFs
[17:41:24] [PASSED] 29 VFs
[17:41:24] [PASSED] 30 VFs
[17:41:24] [PASSED] 31 VFs
[17:41:24] [PASSED] 32 VFs
[17:41:24] [PASSED] 33 VFs
[17:41:24] [PASSED] 34 VFs
[17:41:24] [PASSED] 35 VFs
[17:41:24] [PASSED] 36 VFs
[17:41:24] [PASSED] 37 VFs
[17:41:24] [PASSED] 38 VFs
[17:41:24] [PASSED] 39 VFs
[17:41:24] [PASSED] 40 VFs
[17:41:24] [PASSED] 41 VFs
[17:41:24] [PASSED] 42 VFs
[17:41:24] [PASSED] 43 VFs
[17:41:24] [PASSED] 44 VFs
[17:41:24] [PASSED] 45 VFs
[17:41:24] [PASSED] 46 VFs
[17:41:24] [PASSED] 47 VFs
[17:41:24] [PASSED] 48 VFs
[17:41:24] [PASSED] 49 VFs
[17:41:24] [PASSED] 50 VFs
[17:41:24] [PASSED] 51 VFs
[17:41:24] [PASSED] 52 VFs
[17:41:24] [PASSED] 53 VFs
[17:41:24] [PASSED] 54 VFs
[17:41:24] [PASSED] 55 VFs
[17:41:24] [PASSED] 56 VFs
[17:41:24] [PASSED] 57 VFs
[17:41:24] [PASSED] 58 VFs
[17:41:24] [PASSED] 59 VFs
[17:41:24] [PASSED] 60 VFs
[17:41:24] [PASSED] 61 VFs
[17:41:24] [PASSED] 62 VFs
[17:41:24] [PASSED] 63 VFs
[17:41:24] ==================== [PASSED] fair_ggtt ====================
[17:41:24] ======================== fair_vram  ========================
[17:41:24] [PASSED] 1 VF
[17:41:24] [PASSED] 2 VFs
[17:41:24] [PASSED] 3 VFs
[17:41:24] [PASSED] 4 VFs
[17:41:24] [PASSED] 5 VFs
[17:41:24] [PASSED] 6 VFs
[17:41:24] [PASSED] 7 VFs
[17:41:24] [PASSED] 8 VFs
[17:41:24] [PASSED] 9 VFs
[17:41:24] [PASSED] 10 VFs
[17:41:24] [PASSED] 11 VFs
[17:41:24] [PASSED] 12 VFs
[17:41:24] [PASSED] 13 VFs
[17:41:24] [PASSED] 14 VFs
[17:41:24] [PASSED] 15 VFs
[17:41:24] [PASSED] 16 VFs
[17:41:24] [PASSED] 17 VFs
[17:41:24] [PASSED] 18 VFs
[17:41:24] [PASSED] 19 VFs
[17:41:24] [PASSED] 20 VFs
[17:41:24] [PASSED] 21 VFs
[17:41:24] [PASSED] 22 VFs
[17:41:24] [PASSED] 23 VFs
[17:41:24] [PASSED] 24 VFs
[17:41:24] [PASSED] 25 VFs
[17:41:24] [PASSED] 26 VFs
[17:41:24] [PASSED] 27 VFs
[17:41:24] [PASSED] 28 VFs
[17:41:24] [PASSED] 29 VFs
[17:41:24] [PASSED] 30 VFs
[17:41:24] [PASSED] 31 VFs
[17:41:24] [PASSED] 32 VFs
[17:41:24] [PASSED] 33 VFs
[17:41:24] [PASSED] 34 VFs
[17:41:24] [PASSED] 35 VFs
[17:41:24] [PASSED] 36 VFs
[17:41:24] [PASSED] 37 VFs
[17:41:24] [PASSED] 38 VFs
[17:41:24] [PASSED] 39 VFs
[17:41:24] [PASSED] 40 VFs
[17:41:24] [PASSED] 41 VFs
[17:41:24] [PASSED] 42 VFs
[17:41:24] [PASSED] 43 VFs
[17:41:24] [PASSED] 44 VFs
[17:41:24] [PASSED] 45 VFs
[17:41:24] [PASSED] 46 VFs
[17:41:24] [PASSED] 47 VFs
[17:41:24] [PASSED] 48 VFs
[17:41:24] [PASSED] 49 VFs
[17:41:24] [PASSED] 50 VFs
[17:41:24] [PASSED] 51 VFs
[17:41:24] [PASSED] 52 VFs
[17:41:24] [PASSED] 53 VFs
[17:41:24] [PASSED] 54 VFs
[17:41:24] [PASSED] 55 VFs
[17:41:24] [PASSED] 56 VFs
[17:41:24] [PASSED] 57 VFs
[17:41:24] [PASSED] 58 VFs
[17:41:24] [PASSED] 59 VFs
[17:41:24] [PASSED] 60 VFs
[17:41:24] [PASSED] 61 VFs
[17:41:24] [PASSED] 62 VFs
[17:41:24] [PASSED] 63 VFs
[17:41:24] ==================== [PASSED] fair_vram ====================
[17:41:24] ================== [PASSED] pf_gt_config ===================
[17:41:24] ===================== lmtt (1 subtest) =====================
[17:41:24] ======================== test_ops  =========================
[17:41:24] [PASSED] 2-level
[17:41:24] [PASSED] multi-level
[17:41:24] ==================== [PASSED] test_ops =====================
[17:41:24] ====================== [PASSED] lmtt =======================
[17:41:24] ================= pf_service (11 subtests) =================
[17:41:24] [PASSED] pf_negotiate_any
[17:41:24] [PASSED] pf_negotiate_base_match
[17:41:24] [PASSED] pf_negotiate_base_newer
[17:41:24] [PASSED] pf_negotiate_base_next
[17:41:24] [SKIPPED] pf_negotiate_base_older
[17:41:24] [PASSED] pf_negotiate_base_prev
[17:41:24] [PASSED] pf_negotiate_latest_match
[17:41:24] [PASSED] pf_negotiate_latest_newer
[17:41:24] [PASSED] pf_negotiate_latest_next
[17:41:24] [SKIPPED] pf_negotiate_latest_older
[17:41:24] [SKIPPED] pf_negotiate_latest_prev
[17:41:24] =================== [PASSED] pf_service ====================
[17:41:24] ================= xe_guc_g2g (2 subtests) ==================
[17:41:24] ============== xe_live_guc_g2g_kunit_default  ==============
[17:41:24] ========= [SKIPPED] xe_live_guc_g2g_kunit_default ==========
[17:41:24] ============== xe_live_guc_g2g_kunit_allmem  ===============
[17:41:24] ========== [SKIPPED] xe_live_guc_g2g_kunit_allmem ==========
[17:41:24] =================== [SKIPPED] xe_guc_g2g ===================
[17:41:24] =================== xe_mocs (2 subtests) ===================
[17:41:24] ================ xe_live_mocs_kernel_kunit  ================
[17:41:24] =========== [SKIPPED] xe_live_mocs_kernel_kunit ============
[17:41:24] ================ xe_live_mocs_reset_kunit  =================
[17:41:24] ============ [SKIPPED] xe_live_mocs_reset_kunit ============
[17:41:24] ==================== [SKIPPED] xe_mocs =====================
[17:41:24] ================= xe_migrate (2 subtests) ==================
[17:41:24] ================= xe_migrate_sanity_kunit  =================
[17:41:24] ============ [SKIPPED] xe_migrate_sanity_kunit =============
[17:41:24] ================== xe_validate_ccs_kunit  ==================
[17:41:24] ============= [SKIPPED] xe_validate_ccs_kunit ==============
[17:41:24] =================== [SKIPPED] xe_migrate ===================
[17:41:24] ================== xe_dma_buf (1 subtest) ==================
[17:41:24] ==================== xe_dma_buf_kunit  =====================
[17:41:24] ================ [SKIPPED] xe_dma_buf_kunit ================
[17:41:24] =================== [SKIPPED] xe_dma_buf ===================
[17:41:24] ================= xe_bo_shrink (1 subtest) =================
[17:41:24] =================== xe_bo_shrink_kunit  ====================
[17:41:24] =============== [SKIPPED] xe_bo_shrink_kunit ===============
[17:41:24] ================== [SKIPPED] xe_bo_shrink ==================
[17:41:24] ==================== xe_bo (2 subtests) ====================
[17:41:24] ================== xe_ccs_migrate_kunit  ===================
[17:41:24] ============== [SKIPPED] xe_ccs_migrate_kunit ==============
[17:41:24] ==================== xe_bo_evict_kunit  ====================
[17:41:24] =============== [SKIPPED] xe_bo_evict_kunit ================
[17:41:24] ===================== [SKIPPED] xe_bo ======================
[17:41:24] ==================== args (13 subtests) ====================
[17:41:24] [PASSED] count_args_test
[17:41:24] [PASSED] call_args_example
[17:41:24] [PASSED] call_args_test
[17:41:24] [PASSED] drop_first_arg_example
[17:41:24] [PASSED] drop_first_arg_test
[17:41:24] [PASSED] first_arg_example
[17:41:24] [PASSED] first_arg_test
[17:41:24] [PASSED] last_arg_example
[17:41:24] [PASSED] last_arg_test
[17:41:24] [PASSED] pick_arg_example
[17:41:24] [PASSED] if_args_example
[17:41:24] [PASSED] if_args_test
[17:41:24] [PASSED] sep_comma_example
[17:41:24] ====================== [PASSED] args =======================
[17:41:24] =================== xe_pci (3 subtests) ====================
[17:41:24] ==================== check_graphics_ip  ====================
[17:41:24] [PASSED] 12.00 Xe_LP
[17:41:24] [PASSED] 12.10 Xe_LP+
[17:41:24] [PASSED] 12.55 Xe_HPG
[17:41:24] [PASSED] 12.60 Xe_HPC
[17:41:24] [PASSED] 12.70 Xe_LPG
[17:41:24] [PASSED] 12.71 Xe_LPG
[17:41:24] [PASSED] 12.74 Xe_LPG+
[17:41:24] [PASSED] 20.01 Xe2_HPG
[17:41:24] [PASSED] 20.02 Xe2_HPG
[17:41:24] [PASSED] 20.04 Xe2_LPG
[17:41:24] [PASSED] 30.00 Xe3_LPG
[17:41:24] [PASSED] 30.01 Xe3_LPG
[17:41:24] [PASSED] 30.03 Xe3_LPG
[17:41:24] [PASSED] 30.04 Xe3_LPG
[17:41:24] [PASSED] 30.05 Xe3_LPG
[17:41:24] [PASSED] 35.10 Xe3p_LPG
[17:41:24] [PASSED] 35.11 Xe3p_XPC
[17:41:24] ================ [PASSED] check_graphics_ip ================
[17:41:24] ===================== check_media_ip  ======================
[17:41:24] [PASSED] 12.00 Xe_M
[17:41:24] [PASSED] 12.55 Xe_HPM
[17:41:24] [PASSED] 13.00 Xe_LPM+
[17:41:24] [PASSED] 13.01 Xe2_HPM
[17:41:24] [PASSED] 20.00 Xe2_LPM
[17:41:24] [PASSED] 30.00 Xe3_LPM
[17:41:24] [PASSED] 30.02 Xe3_LPM
[17:41:24] [PASSED] 35.00 Xe3p_LPM
[17:41:24] [PASSED] 35.03 Xe3p_HPM
[17:41:24] ================= [PASSED] check_media_ip ==================
[17:41:24] =================== check_platform_desc  ===================
[17:41:24] [PASSED] 0x9A60 (TIGERLAKE)
[17:41:24] [PASSED] 0x9A68 (TIGERLAKE)
[17:41:24] [PASSED] 0x9A70 (TIGERLAKE)
[17:41:24] [PASSED] 0x9A40 (TIGERLAKE)
[17:41:24] [PASSED] 0x9A49 (TIGERLAKE)
[17:41:24] [PASSED] 0x9A59 (TIGERLAKE)
[17:41:24] [PASSED] 0x9A78 (TIGERLAKE)
[17:41:24] [PASSED] 0x9AC0 (TIGERLAKE)
[17:41:24] [PASSED] 0x9AC9 (TIGERLAKE)
[17:41:24] [PASSED] 0x9AD9 (TIGERLAKE)
[17:41:24] [PASSED] 0x9AF8 (TIGERLAKE)
[17:41:24] [PASSED] 0x4C80 (ROCKETLAKE)
[17:41:24] [PASSED] 0x4C8A (ROCKETLAKE)
[17:41:24] [PASSED] 0x4C8B (ROCKETLAKE)
[17:41:24] [PASSED] 0x4C8C (ROCKETLAKE)
[17:41:24] [PASSED] 0x4C90 (ROCKETLAKE)
[17:41:24] [PASSED] 0x4C9A (ROCKETLAKE)
[17:41:24] [PASSED] 0x4680 (ALDERLAKE_S)
[17:41:24] [PASSED] 0x4682 (ALDERLAKE_S)
[17:41:24] [PASSED] 0x4688 (ALDERLAKE_S)
[17:41:24] [PASSED] 0x468A (ALDERLAKE_S)
[17:41:24] [PASSED] 0x468B (ALDERLAKE_S)
[17:41:24] [PASSED] 0x4690 (ALDERLAKE_S)
[17:41:24] [PASSED] 0x4692 (ALDERLAKE_S)
[17:41:24] [PASSED] 0x4693 (ALDERLAKE_S)
[17:41:24] [PASSED] 0x46A0 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46A1 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46A2 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46A3 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46A6 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46A8 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46AA (ALDERLAKE_P)
[17:41:24] [PASSED] 0x462A (ALDERLAKE_P)
[17:41:24] [PASSED] 0x4626 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x4628 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46B0 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46B1 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46B2 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46B3 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46C0 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46C1 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46C2 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46C3 (ALDERLAKE_P)
[17:41:24] [PASSED] 0x46D0 (ALDERLAKE_N)
[17:41:24] [PASSED] 0x46D1 (ALDERLAKE_N)
[17:41:24] [PASSED] 0x46D2 (ALDERLAKE_N)
[17:41:24] [PASSED] 0x46D3 (ALDERLAKE_N)
[17:41:24] [PASSED] 0x46D4 (ALDERLAKE_N)
[17:41:24] [PASSED] 0xA721 (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7A1 (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7A9 (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7AC (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7AD (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA720 (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7A0 (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7A8 (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7AA (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA7AB (ALDERLAKE_P)
[17:41:24] [PASSED] 0xA780 (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA781 (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA782 (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA783 (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA788 (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA789 (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA78A (ALDERLAKE_S)
[17:41:24] [PASSED] 0xA78B (ALDERLAKE_S)
[17:41:24] [PASSED] 0x4905 (DG1)
[17:41:24] [PASSED] 0x4906 (DG1)
[17:41:24] [PASSED] 0x4907 (DG1)
[17:41:24] [PASSED] 0x4908 (DG1)
[17:41:24] [PASSED] 0x4909 (DG1)
[17:41:24] [PASSED] 0x56C0 (DG2)
[17:41:24] [PASSED] 0x56C2 (DG2)
[17:41:24] [PASSED] 0x56C1 (DG2)
[17:41:24] [PASSED] 0x7D51 (METEORLAKE)
[17:41:24] [PASSED] 0x7DD1 (METEORLAKE)
[17:41:24] [PASSED] 0x7D41 (METEORLAKE)
[17:41:24] [PASSED] 0x7D67 (METEORLAKE)
[17:41:24] [PASSED] 0xB640 (METEORLAKE)
[17:41:24] [PASSED] 0x56A0 (DG2)
[17:41:24] [PASSED] 0x56A1 (DG2)
[17:41:24] [PASSED] 0x56A2 (DG2)
[17:41:24] [PASSED] 0x56BE (DG2)
[17:41:24] [PASSED] 0x56BF (DG2)
[17:41:24] [PASSED] 0x5690 (DG2)
[17:41:24] [PASSED] 0x5691 (DG2)
[17:41:24] [PASSED] 0x5692 (DG2)
[17:41:24] [PASSED] 0x56A5 (DG2)
[17:41:24] [PASSED] 0x56A6 (DG2)
[17:41:24] [PASSED] 0x56B0 (DG2)
[17:41:24] [PASSED] 0x56B1 (DG2)
[17:41:24] [PASSED] 0x56BA (DG2)
[17:41:24] [PASSED] 0x56BB (DG2)
[17:41:24] [PASSED] 0x56BC (DG2)
[17:41:24] [PASSED] 0x56BD (DG2)
[17:41:24] [PASSED] 0x5693 (DG2)
[17:41:24] [PASSED] 0x5694 (DG2)
[17:41:24] [PASSED] 0x5695 (DG2)
[17:41:24] [PASSED] 0x56A3 (DG2)
[17:41:24] [PASSED] 0x56A4 (DG2)
[17:41:24] [PASSED] 0x56B2 (DG2)
[17:41:24] [PASSED] 0x56B3 (DG2)
[17:41:24] [PASSED] 0x5696 (DG2)
[17:41:24] [PASSED] 0x5697 (DG2)
[17:41:24] [PASSED] 0xB69 (PVC)
[17:41:24] [PASSED] 0xB6E (PVC)
[17:41:24] [PASSED] 0xBD4 (PVC)
[17:41:24] [PASSED] 0xBD5 (PVC)
[17:41:24] [PASSED] 0xBD6 (PVC)
[17:41:24] [PASSED] 0xBD7 (PVC)
[17:41:24] [PASSED] 0xBD8 (PVC)
[17:41:24] [PASSED] 0xBD9 (PVC)
[17:41:24] [PASSED] 0xBDA (PVC)
[17:41:24] [PASSED] 0xBDB (PVC)
[17:41:24] [PASSED] 0xBE0 (PVC)
[17:41:24] [PASSED] 0xBE1 (PVC)
[17:41:24] [PASSED] 0xBE5 (PVC)
[17:41:24] [PASSED] 0x7D40 (METEORLAKE)
[17:41:24] [PASSED] 0x7D45 (METEORLAKE)
[17:41:24] [PASSED] 0x7D55 (METEORLAKE)
[17:41:24] [PASSED] 0x7D60 (METEORLAKE)
[17:41:24] [PASSED] 0x7DD5 (METEORLAKE)
[17:41:24] [PASSED] 0x6420 (LUNARLAKE)
[17:41:24] [PASSED] 0x64A0 (LUNARLAKE)
[17:41:24] [PASSED] 0x64B0 (LUNARLAKE)
[17:41:24] [PASSED] 0xE202 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE209 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE20B (BATTLEMAGE)
[17:41:24] [PASSED] 0xE20C (BATTLEMAGE)
[17:41:24] [PASSED] 0xE20D (BATTLEMAGE)
[17:41:24] [PASSED] 0xE210 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE211 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE212 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE216 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE220 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE221 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE222 (BATTLEMAGE)
[17:41:24] [PASSED] 0xE223 (BATTLEMAGE)
[17:41:24] [PASSED] 0xB080 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB081 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB082 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB083 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB084 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB085 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB086 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB087 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB08F (PANTHERLAKE)
[17:41:24] [PASSED] 0xB090 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB0A0 (PANTHERLAKE)
[17:41:24] [PASSED] 0xB0B0 (PANTHERLAKE)
[17:41:24] [PASSED] 0xFD80 (PANTHERLAKE)
[17:41:24] [PASSED] 0xFD81 (PANTHERLAKE)
[17:41:24] [PASSED] 0xD740 (NOVALAKE_S)
[17:41:24] [PASSED] 0xD741 (NOVALAKE_S)
[17:41:24] [PASSED] 0xD742 (NOVALAKE_S)
[17:41:24] [PASSED] 0xD743 (NOVALAKE_S)
[17:41:24] [PASSED] 0xD744 (NOVALAKE_S)
[17:41:24] [PASSED] 0xD745 (NOVALAKE_S)
[17:41:24] [PASSED] 0x674C (CRESCENTISLAND)
[17:41:24] [PASSED] 0x674D (CRESCENTISLAND)
[17:41:24] [PASSED] 0x674E (CRESCENTISLAND)
[17:41:24] [PASSED] 0x674F (CRESCENTISLAND)
[17:41:24] [PASSED] 0x6750 (CRESCENTISLAND)
[17:41:24] [PASSED] 0xD750 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD751 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD752 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD753 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD754 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD755 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD756 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD757 (NOVALAKE_P)
[17:41:24] [PASSED] 0xD75F (NOVALAKE_P)
[17:41:24] =============== [PASSED] check_platform_desc ===============
[17:41:24] ===================== [PASSED] xe_pci ======================
[17:41:24] =================== xe_rtp (3 subtests) ====================
[17:41:24] =================== xe_rtp_rules_tests  ====================
[17:41:24] [PASSED] no
[17:41:24] [PASSED] yes
[17:41:24] [PASSED] no-and-no
[17:41:24] [PASSED] no-and-yes
[17:41:24] [PASSED] yes-and-no
[17:41:24] [PASSED] yes-and-yes
[17:41:24] [PASSED] no-or-no
[17:41:24] [PASSED] no-or-yes
[17:41:24] [PASSED] yes-or-no
[17:41:24] [PASSED] yes-or-yes
[17:41:24] [PASSED] no-yes-or-yes-no
[17:41:24] [PASSED] no-yes-or-yes-yes
[17:41:24] [PASSED] yes-yes-or-no-yes
[17:41:24] [PASSED] yes-yes-or-yes-yes
[17:41:24] [PASSED] no-no-or-yes-or-no
[17:41:24] [PASSED] or
[17:41:24] [PASSED] or-yes
[17:41:24] [PASSED] or-no
[17:41:24] [PASSED] yes-or
[17:41:24] [PASSED] no-or
[17:41:24] [PASSED] no-or-or-yes
[17:41:24] [PASSED] yes-or-or-no
[17:41:24] [PASSED] no-or-or-no
[17:41:24] [PASSED] missing-context-engine-class
[17:41:24] [PASSED] missing-context-engine-class-or-yes
[17:41:24] [PASSED] missing-context-engine-class-or-or-yes
[17:41:24] =============== [PASSED] xe_rtp_rules_tests ================
[17:41:24] =============== xe_rtp_process_to_sr_tests  ================
[17:41:24] [PASSED] coalesce-same-reg
[17:41:24] [PASSED] no-match-no-add
[17:41:24] [PASSED] two-regs-two-entries
[17:41:24] [PASSED] clr-one-set-other
[17:41:24] [PASSED] set-field
[17:41:24] [PASSED] conflict-duplicate
[17:41:24] [PASSED] conflict-not-disjoint
[17:41:24] [PASSED] conflict-reg-type
[17:41:24] [PASSED] bad-mcr-reg-forced-to-regular
[17:41:24] [PASSED] bad-regular-reg-forced-to-mcr
[17:41:24] =========== [PASSED] xe_rtp_process_to_sr_tests ============
[17:41:24] ================== xe_rtp_process_tests  ===================
[17:41:24] [PASSED] active1
[17:41:24] [PASSED] active2
[17:41:24] [PASSED] active-inactive
[17:41:24] [PASSED] inactive-active
[17:41:24] [PASSED] inactive-active-inactive
[17:41:24] [PASSED] inactive-inactive-inactive
[17:41:24] ============== [PASSED] xe_rtp_process_tests ===============
[17:41:24] ===================== [PASSED] xe_rtp ======================
[17:41:24] ==================== xe_wa (1 subtest) =====================
[17:41:24] ======================== xe_wa_gt  =========================
[17:41:24] [PASSED] TIGERLAKE B0
[17:41:24] [PASSED] DG1 A0
[17:41:24] [PASSED] DG1 B0
[17:41:24] [PASSED] ALDERLAKE_S A0
[17:41:24] [PASSED] ALDERLAKE_S B0
[17:41:24] [PASSED] ALDERLAKE_S C0
[17:41:24] [PASSED] ALDERLAKE_S D0
[17:41:24] [PASSED] ALDERLAKE_P A0
[17:41:24] [PASSED] ALDERLAKE_P B0
[17:41:24] [PASSED] ALDERLAKE_P C0
[17:41:24] [PASSED] ALDERLAKE_S RPLS D0
[17:41:24] [PASSED] ALDERLAKE_P RPLU E0
[17:41:24] [PASSED] DG2 G10 C0
[17:41:24] [PASSED] DG2 G11 B1
[17:41:24] [PASSED] DG2 G12 A1
[17:41:24] [PASSED] METEORLAKE 12.70(Xe_LPG) A0 13.00(Xe_LPM+) A0
[17:41:24] [PASSED] METEORLAKE 12.71(Xe_LPG) A0 13.00(Xe_LPM+) A0
[17:41:24] [PASSED] METEORLAKE 12.74(Xe_LPG+) A0 13.00(Xe_LPM+) A0
[17:41:24] [PASSED] LUNARLAKE 20.04(Xe2_LPG) A0 20.00(Xe2_LPM) A0
[17:41:24] [PASSED] LUNARLAKE 20.04(Xe2_LPG) B0 20.00(Xe2_LPM) A0
[17:41:24] [PASSED] BATTLEMAGE 20.01(Xe2_HPG) A0 13.01(Xe2_HPM) A1
[17:41:24] [PASSED] PANTHERLAKE 30.00(Xe3_LPG) A0 30.00(Xe3_LPM) A0
[17:41:24] ==================== [PASSED] xe_wa_gt =====================
[17:41:24] ====================== [PASSED] xe_wa ======================
[17:41:24] ============================================================
[17:41:24] Testing complete. Ran 624 tests: passed: 606, skipped: 18
[17:41:24] Elapsed time: 36.350s total, 4.300s configuring, 31.385s building, 0.628s running

+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/tests/.kunitconfig [17:41:24] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[17:41:26] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[17:41:50] Starting KUnit Kernel (1/1)...
[17:41:50] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[17:41:50] ============ drm_test_pick_cmdline (2 subtests) ============
[17:41:50] [PASSED] drm_test_pick_cmdline_res_1920_1080_60
[17:41:50] =============== drm_test_pick_cmdline_named  ===============
[17:41:50] [PASSED] NTSC
[17:41:50] [PASSED] NTSC-J
[17:41:50] [PASSED] PAL
[17:41:50] [PASSED] PAL-M
[17:41:50] =========== [PASSED] drm_test_pick_cmdline_named ===========
[17:41:50] ============== [PASSED] drm_test_pick_cmdline ==============
[17:41:50] == drm_test_atomic_get_connector_for_encoder (1 subtest) ===
[17:41:50] [PASSED] drm_test_drm_atomic_get_connector_for_encoder
[17:41:50] ==== [PASSED] drm_test_atomic_get_connector_for_encoder ====
[17:41:50] =========== drm_validate_clone_mode (2 subtests) ===========
[17:41:50] ============== drm_test_check_in_clone_mode  ===============
[17:41:50] [PASSED] in_clone_mode
[17:41:50] [PASSED] not_in_clone_mode
[17:41:50] ========== [PASSED] drm_test_check_in_clone_mode ===========
[17:41:50] =============== drm_test_check_valid_clones  ===============
[17:41:50] [PASSED] not_in_clone_mode
[17:41:50] [PASSED] valid_clone
[17:41:50] [PASSED] invalid_clone
[17:41:50] =========== [PASSED] drm_test_check_valid_clones ===========
[17:41:50] ============= [PASSED] drm_validate_clone_mode =============
[17:41:50] ============= drm_validate_modeset (1 subtest) =============
[17:41:50] [PASSED] drm_test_check_connector_changed_modeset
[17:41:50] ============== [PASSED] drm_validate_modeset ===============
[17:41:50] ====== drm_test_bridge_get_current_state (2 subtests) ======
[17:41:50] [PASSED] drm_test_drm_bridge_get_current_state_atomic
[17:41:50] [PASSED] drm_test_drm_bridge_get_current_state_legacy
[17:41:50] ======== [PASSED] drm_test_bridge_get_current_state ========
[17:41:50] ====== drm_test_bridge_helper_reset_crtc (3 subtests) ======
[17:41:50] [PASSED] drm_test_drm_bridge_helper_reset_crtc_atomic
[17:41:50] [PASSED] drm_test_drm_bridge_helper_reset_crtc_atomic_disabled
[17:41:50] [PASSED] drm_test_drm_bridge_helper_reset_crtc_legacy
[17:41:50] ======== [PASSED] drm_test_bridge_helper_reset_crtc ========
[17:41:50] ============== drm_bridge_alloc (2 subtests) ===============
[17:41:50] [PASSED] drm_test_drm_bridge_alloc_basic
[17:41:50] [PASSED] drm_test_drm_bridge_alloc_get_put
[17:41:50] ================ [PASSED] drm_bridge_alloc =================
[17:41:50] ============= drm_cmdline_parser (40 subtests) =============
[17:41:50] [PASSED] drm_test_cmdline_force_d_only
[17:41:50] [PASSED] drm_test_cmdline_force_D_only_dvi
[17:41:50] [PASSED] drm_test_cmdline_force_D_only_hdmi
[17:41:50] [PASSED] drm_test_cmdline_force_D_only_not_digital
[17:41:50] [PASSED] drm_test_cmdline_force_e_only
[17:41:50] [PASSED] drm_test_cmdline_res
[17:41:50] [PASSED] drm_test_cmdline_res_vesa
[17:41:50] [PASSED] drm_test_cmdline_res_vesa_rblank
[17:41:50] [PASSED] drm_test_cmdline_res_rblank
[17:41:50] [PASSED] drm_test_cmdline_res_bpp
[17:41:50] [PASSED] drm_test_cmdline_res_refresh
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_margins
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_force_off
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_analog
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_digital
[17:41:50] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced_margins_force_on
[17:41:50] [PASSED] drm_test_cmdline_res_margins_force_on
[17:41:50] [PASSED] drm_test_cmdline_res_vesa_margins
[17:41:50] [PASSED] drm_test_cmdline_name
[17:41:50] [PASSED] drm_test_cmdline_name_bpp
[17:41:50] [PASSED] drm_test_cmdline_name_option
[17:41:50] [PASSED] drm_test_cmdline_name_bpp_option
[17:41:50] [PASSED] drm_test_cmdline_rotate_0
[17:41:50] [PASSED] drm_test_cmdline_rotate_90
[17:41:50] [PASSED] drm_test_cmdline_rotate_180
[17:41:50] [PASSED] drm_test_cmdline_rotate_270
[17:41:50] [PASSED] drm_test_cmdline_hmirror
[17:41:50] [PASSED] drm_test_cmdline_vmirror
[17:41:50] [PASSED] drm_test_cmdline_margin_options
[17:41:50] [PASSED] drm_test_cmdline_multiple_options
[17:41:50] [PASSED] drm_test_cmdline_bpp_extra_and_option
[17:41:50] [PASSED] drm_test_cmdline_extra_and_option
[17:41:50] [PASSED] drm_test_cmdline_freestanding_options
[17:41:50] [PASSED] drm_test_cmdline_freestanding_force_e_and_options
[17:41:50] [PASSED] drm_test_cmdline_panel_orientation
[17:41:50] ================ drm_test_cmdline_invalid  =================
[17:41:50] [PASSED] margin_only
[17:41:50] [PASSED] interlace_only
[17:41:50] [PASSED] res_missing_x
[17:41:50] [PASSED] res_missing_y
[17:41:50] [PASSED] res_bad_y
[17:41:50] [PASSED] res_missing_y_bpp
[17:41:50] [PASSED] res_bad_bpp
[17:41:50] [PASSED] res_bad_refresh
[17:41:50] [PASSED] res_bpp_refresh_force_on_off
[17:41:50] [PASSED] res_invalid_mode
[17:41:50] [PASSED] res_bpp_wrong_place_mode
[17:41:50] [PASSED] name_bpp_refresh
[17:41:50] [PASSED] name_refresh
[17:41:50] [PASSED] name_refresh_wrong_mode
[17:41:50] [PASSED] name_refresh_invalid_mode
[17:41:50] [PASSED] rotate_multiple
[17:41:50] [PASSED] rotate_invalid_val
[17:41:50] [PASSED] rotate_truncated
[17:41:50] [PASSED] invalid_option
[17:41:50] [PASSED] invalid_tv_option
[17:41:50] [PASSED] truncated_tv_option
[17:41:50] ============ [PASSED] drm_test_cmdline_invalid =============
[17:41:50] =============== drm_test_cmdline_tv_options  ===============
[17:41:50] [PASSED] NTSC
[17:41:50] [PASSED] NTSC_443
[17:41:50] [PASSED] NTSC_J
[17:41:50] [PASSED] PAL
[17:41:50] [PASSED] PAL_M
[17:41:50] [PASSED] PAL_N
[17:41:50] [PASSED] SECAM
[17:41:50] [PASSED] MONO_525
[17:41:50] [PASSED] MONO_625
[17:41:50] =========== [PASSED] drm_test_cmdline_tv_options ===========
[17:41:50] =============== [PASSED] drm_cmdline_parser ================
[17:41:50] ========== drmm_connector_hdmi_init (20 subtests) ==========
[17:41:50] [PASSED] drm_test_connector_hdmi_init_valid
[17:41:50] [PASSED] drm_test_connector_hdmi_init_bpc_8
[17:41:50] [PASSED] drm_test_connector_hdmi_init_bpc_10
[17:41:50] [PASSED] drm_test_connector_hdmi_init_bpc_12
[17:41:50] [PASSED] drm_test_connector_hdmi_init_bpc_invalid
[17:41:50] [PASSED] drm_test_connector_hdmi_init_bpc_null
[17:41:50] [PASSED] drm_test_connector_hdmi_init_formats_empty
[17:41:50] [PASSED] drm_test_connector_hdmi_init_formats_no_rgb
[17:41:50] === drm_test_connector_hdmi_init_formats_yuv420_allowed  ===
[17:41:50] [PASSED] supported_formats=0x9 yuv420_allowed=1
[17:41:50] [PASSED] supported_formats=0x9 yuv420_allowed=0
[17:41:50] [PASSED] supported_formats=0x5 yuv420_allowed=1
[17:41:50] [PASSED] supported_formats=0x5 yuv420_allowed=0
[17:41:50] === [PASSED] drm_test_connector_hdmi_init_formats_yuv420_allowed ===
[17:41:50] [PASSED] drm_test_connector_hdmi_init_null_ddc
[17:41:50] [PASSED] drm_test_connector_hdmi_init_null_product
[17:41:50] [PASSED] drm_test_connector_hdmi_init_null_vendor
[17:41:50] [PASSED] drm_test_connector_hdmi_init_product_length_exact
[17:41:50] [PASSED] drm_test_connector_hdmi_init_product_length_too_long
[17:41:50] [PASSED] drm_test_connector_hdmi_init_product_valid
[17:41:50] [PASSED] drm_test_connector_hdmi_init_vendor_length_exact
[17:41:50] [PASSED] drm_test_connector_hdmi_init_vendor_length_too_long
[17:41:50] [PASSED] drm_test_connector_hdmi_init_vendor_valid
[17:41:50] ========= drm_test_connector_hdmi_init_type_valid  =========
[17:41:50] [PASSED] HDMI-A
[17:41:50] [PASSED] HDMI-B
[17:41:50] ===== [PASSED] drm_test_connector_hdmi_init_type_valid =====
[17:41:50] ======== drm_test_connector_hdmi_init_type_invalid  ========
[17:41:50] [PASSED] Unknown
[17:41:50] [PASSED] VGA
[17:41:50] [PASSED] DVI-I
[17:41:50] [PASSED] DVI-D
[17:41:50] [PASSED] DVI-A
[17:41:50] [PASSED] Composite
[17:41:50] [PASSED] SVIDEO
[17:41:50] [PASSED] LVDS
[17:41:50] [PASSED] Component
[17:41:50] [PASSED] DIN
[17:41:50] [PASSED] DP
[17:41:50] [PASSED] TV
[17:41:50] [PASSED] eDP
[17:41:50] [PASSED] Virtual
[17:41:50] [PASSED] DSI
[17:41:50] [PASSED] DPI
[17:41:50] [PASSED] Writeback
[17:41:50] [PASSED] SPI
[17:41:50] [PASSED] USB
[17:41:50] ==== [PASSED] drm_test_connector_hdmi_init_type_invalid ====
[17:41:50] ============ [PASSED] drmm_connector_hdmi_init =============
[17:41:50] ============= drmm_connector_init (3 subtests) =============
[17:41:50] [PASSED] drm_test_drmm_connector_init
[17:41:50] [PASSED] drm_test_drmm_connector_init_null_ddc
[17:41:50] ========= drm_test_drmm_connector_init_type_valid  =========
[17:41:50] [PASSED] Unknown
[17:41:50] [PASSED] VGA
[17:41:50] [PASSED] DVI-I
[17:41:50] [PASSED] DVI-D
[17:41:50] [PASSED] DVI-A
[17:41:50] [PASSED] Composite
[17:41:50] [PASSED] SVIDEO
[17:41:50] [PASSED] LVDS
[17:41:50] [PASSED] Component
[17:41:50] [PASSED] DIN
[17:41:50] [PASSED] DP
[17:41:50] [PASSED] HDMI-A
[17:41:50] [PASSED] HDMI-B
[17:41:50] [PASSED] TV
[17:41:50] [PASSED] eDP
[17:41:50] [PASSED] Virtual
[17:41:50] [PASSED] DSI
[17:41:50] [PASSED] DPI
[17:41:50] [PASSED] Writeback
[17:41:50] [PASSED] SPI
[17:41:50] [PASSED] USB
[17:41:50] ===== [PASSED] drm_test_drmm_connector_init_type_valid =====
[17:41:50] =============== [PASSED] drmm_connector_init ===============
[17:41:50] ========= drm_connector_dynamic_init (6 subtests) ==========
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_init
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_init_null_ddc
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_init_not_added
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_init_properties
[17:41:50] ===== drm_test_drm_connector_dynamic_init_type_valid  ======
[17:41:50] [PASSED] Unknown
[17:41:50] [PASSED] VGA
[17:41:50] [PASSED] DVI-I
[17:41:50] [PASSED] DVI-D
[17:41:50] [PASSED] DVI-A
[17:41:50] [PASSED] Composite
[17:41:50] [PASSED] SVIDEO
[17:41:50] [PASSED] LVDS
[17:41:50] [PASSED] Component
[17:41:50] [PASSED] DIN
[17:41:50] [PASSED] DP
[17:41:50] [PASSED] HDMI-A
[17:41:50] [PASSED] HDMI-B
[17:41:50] [PASSED] TV
[17:41:50] [PASSED] eDP
[17:41:50] [PASSED] Virtual
[17:41:50] [PASSED] DSI
[17:41:50] [PASSED] DPI
[17:41:50] [PASSED] Writeback
[17:41:50] [PASSED] SPI
[17:41:50] [PASSED] USB
[17:41:50] = [PASSED] drm_test_drm_connector_dynamic_init_type_valid ==
[17:41:50] ======== drm_test_drm_connector_dynamic_init_name  =========
[17:41:50] [PASSED] Unknown
[17:41:50] [PASSED] VGA
[17:41:50] [PASSED] DVI-I
[17:41:50] [PASSED] DVI-D
[17:41:50] [PASSED] DVI-A
[17:41:50] [PASSED] Composite
[17:41:50] [PASSED] SVIDEO
[17:41:50] [PASSED] LVDS
[17:41:50] [PASSED] Component
[17:41:50] [PASSED] DIN
[17:41:50] [PASSED] DP
[17:41:50] [PASSED] HDMI-A
[17:41:50] [PASSED] HDMI-B
[17:41:50] [PASSED] TV
[17:41:50] [PASSED] eDP
[17:41:50] [PASSED] Virtual
[17:41:50] [PASSED] DSI
[17:41:50] [PASSED] DPI
[17:41:50] [PASSED] Writeback
[17:41:50] [PASSED] SPI
[17:41:50] [PASSED] USB
[17:41:50] ==== [PASSED] drm_test_drm_connector_dynamic_init_name =====
[17:41:50] =========== [PASSED] drm_connector_dynamic_init ============
[17:41:50] ==== drm_connector_dynamic_register_early (4 subtests) =====
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_early_on_list
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_early_defer
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_early_no_init
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_early_no_mode_object
[17:41:50] ====== [PASSED] drm_connector_dynamic_register_early =======
[17:41:50] ======= drm_connector_dynamic_register (7 subtests) ========
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_on_list
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_no_defer
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_no_init
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_mode_object
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_sysfs
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_sysfs_name
[17:41:50] [PASSED] drm_test_drm_connector_dynamic_register_debugfs
[17:41:50] ========= [PASSED] drm_connector_dynamic_register ==========
[17:41:50] = drm_connector_attach_broadcast_rgb_property (2 subtests) =
[17:41:50] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property
[17:41:50] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector
[17:41:50] === [PASSED] drm_connector_attach_broadcast_rgb_property ===
[17:41:50] ========== drm_get_tv_mode_from_name (2 subtests) ==========
[17:41:50] ========== drm_test_get_tv_mode_from_name_valid  ===========
[17:41:50] [PASSED] NTSC
[17:41:50] [PASSED] NTSC-443
[17:41:50] [PASSED] NTSC-J
[17:41:50] [PASSED] PAL
[17:41:50] [PASSED] PAL-M
[17:41:50] [PASSED] PAL-N
[17:41:50] [PASSED] SECAM
[17:41:50] [PASSED] Mono
[17:41:50] ====== [PASSED] drm_test_get_tv_mode_from_name_valid =======
[17:41:50] [PASSED] drm_test_get_tv_mode_from_name_truncated
[17:41:50] ============ [PASSED] drm_get_tv_mode_from_name ============
[17:41:50] = drm_test_connector_hdmi_compute_mode_clock (12 subtests) =
[17:41:50] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb
[17:41:50] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc
[17:41:50] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc_vic_1
[17:41:50] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc
[17:41:50] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc_vic_1
[17:41:50] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_double
[17:41:50] = drm_test_connector_hdmi_compute_mode_clock_yuv420_valid  =
[17:41:50] [PASSED] VIC 96
[17:41:50] [PASSED] VIC 97
[17:41:50] [PASSED] VIC 101
[17:41:50] [PASSED] VIC 102
[17:41:50] [PASSED] VIC 106
[17:41:50] [PASSED] VIC 107
[17:41:50] === [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_valid ===
[17:41:50] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_10_bpc
[17:41:50] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_12_bpc
[17:41:50] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_8_bpc
[17:41:50] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_10_bpc
[17:41:50] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_12_bpc
[17:41:50] === [PASSED] drm_test_connector_hdmi_compute_mode_clock ====
[17:41:50] == drm_hdmi_connector_get_broadcast_rgb_name (2 subtests) ==
[17:41:50] === drm_test_drm_hdmi_connector_get_broadcast_rgb_name  ====
[17:41:50] [PASSED] Automatic
[17:41:50] [PASSED] Full
[17:41:50] [PASSED] Limited 16:235
[17:41:50] === [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name ===
[17:41:50] [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name_invalid
[17:41:50] ==== [PASSED] drm_hdmi_connector_get_broadcast_rgb_name ====
[17:41:50] == drm_hdmi_connector_get_output_format_name (2 subtests) ==
[17:41:50] === drm_test_drm_hdmi_connector_get_output_format_name  ====
[17:41:50] [PASSED] RGB
[17:41:50] [PASSED] YUV 4:2:0
[17:41:50] [PASSED] YUV 4:2:2
[17:41:50] [PASSED] YUV 4:4:4
[17:41:50] === [PASSED] drm_test_drm_hdmi_connector_get_output_format_name ===
[17:41:50] [PASSED] drm_test_drm_hdmi_connector_get_output_format_name_invalid
[17:41:50] ==== [PASSED] drm_hdmi_connector_get_output_format_name ====
[17:41:50] ============= drm_damage_helper (21 subtests) ==============
[17:41:50] [PASSED] drm_test_damage_iter_no_damage
[17:41:50] [PASSED] drm_test_damage_iter_no_damage_fractional_src
[17:41:50] [PASSED] drm_test_damage_iter_no_damage_src_moved
[17:41:50] [PASSED] drm_test_damage_iter_no_damage_fractional_src_moved
[17:41:50] [PASSED] drm_test_damage_iter_no_damage_not_visible
[17:41:50] [PASSED] drm_test_damage_iter_no_damage_no_crtc
[17:41:50] [PASSED] drm_test_damage_iter_no_damage_no_fb
[17:41:50] [PASSED] drm_test_damage_iter_simple_damage
[17:41:50] [PASSED] drm_test_damage_iter_single_damage
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_intersect_src
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_outside_src
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_fractional_src
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_intersect_fractional_src
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_outside_fractional_src
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_src_moved
[17:41:50] [PASSED] drm_test_damage_iter_single_damage_fractional_src_moved
[17:41:50] [PASSED] drm_test_damage_iter_damage
[17:41:50] [PASSED] drm_test_damage_iter_damage_one_intersect
[17:41:50] [PASSED] drm_test_damage_iter_damage_one_outside
[17:41:50] [PASSED] drm_test_damage_iter_damage_src_moved
[17:41:50] [PASSED] drm_test_damage_iter_damage_not_visible
[17:41:50] ================ [PASSED] drm_damage_helper ================
[17:41:50] ============== drm_dp_mst_helper (3 subtests) ==============
[17:41:50] ============== drm_test_dp_mst_calc_pbn_mode  ==============
[17:41:50] [PASSED] Clock 154000 BPP 30 DSC disabled
[17:41:50] [PASSED] Clock 234000 BPP 30 DSC disabled
[17:41:50] [PASSED] Clock 297000 BPP 24 DSC disabled
[17:41:50] [PASSED] Clock 332880 BPP 24 DSC enabled
[17:41:50] [PASSED] Clock 324540 BPP 24 DSC enabled
[17:41:50] ========== [PASSED] drm_test_dp_mst_calc_pbn_mode ==========
[17:41:50] ============== drm_test_dp_mst_calc_pbn_div  ===============
[17:41:50] [PASSED] Link rate 2000000 lane count 4
[17:41:50] [PASSED] Link rate 2000000 lane count 2
[17:41:50] [PASSED] Link rate 2000000 lane count 1
[17:41:50] [PASSED] Link rate 1350000 lane count 4
[17:41:50] [PASSED] Link rate 1350000 lane count 2
[17:41:50] [PASSED] Link rate 1350000 lane count 1
[17:41:50] [PASSED] Link rate 1000000 lane count 4
[17:41:50] [PASSED] Link rate 1000000 lane count 2
[17:41:50] [PASSED] Link rate 1000000 lane count 1
[17:41:50] [PASSED] Link rate 810000 lane count 4
[17:41:50] [PASSED] Link rate 810000 lane count 2
[17:41:50] [PASSED] Link rate 810000 lane count 1
[17:41:50] [PASSED] Link rate 540000 lane count 4
[17:41:50] [PASSED] Link rate 540000 lane count 2
[17:41:50] [PASSED] Link rate 540000 lane count 1
[17:41:50] [PASSED] Link rate 270000 lane count 4
[17:41:50] [PASSED] Link rate 270000 lane count 2
[17:41:50] [PASSED] Link rate 270000 lane count 1
[17:41:50] [PASSED] Link rate 162000 lane count 4
[17:41:50] [PASSED] Link rate 162000 lane count 2
[17:41:50] [PASSED] Link rate 162000 lane count 1
[17:41:50] ========== [PASSED] drm_test_dp_mst_calc_pbn_div ===========
[17:41:50] ========= drm_test_dp_mst_sideband_msg_req_decode  =========
[17:41:50] [PASSED] DP_ENUM_PATH_RESOURCES with port number
[17:41:50] [PASSED] DP_POWER_UP_PHY with port number
[17:41:50] [PASSED] DP_POWER_DOWN_PHY with port number
[17:41:50] [PASSED] DP_ALLOCATE_PAYLOAD with SDP stream sinks
[17:41:50] [PASSED] DP_ALLOCATE_PAYLOAD with port number
[17:41:50] [PASSED] DP_ALLOCATE_PAYLOAD with VCPI
[17:41:50] [PASSED] DP_ALLOCATE_PAYLOAD with PBN
[17:41:50] [PASSED] DP_QUERY_PAYLOAD with port number
[17:41:50] [PASSED] DP_QUERY_PAYLOAD with VCPI
[17:41:50] [PASSED] DP_REMOTE_DPCD_READ with port number
[17:41:50] [PASSED] DP_REMOTE_DPCD_READ with DPCD address
[17:41:50] [PASSED] DP_REMOTE_DPCD_READ with max number of bytes
[17:41:50] [PASSED] DP_REMOTE_DPCD_WRITE with port number
[17:41:50] [PASSED] DP_REMOTE_DPCD_WRITE with DPCD address
[17:41:50] [PASSED] DP_REMOTE_DPCD_WRITE with data array
[17:41:50] [PASSED] DP_REMOTE_I2C_READ with port number
[17:41:50] [PASSED] DP_REMOTE_I2C_READ with I2C device ID
[17:41:50] [PASSED] DP_REMOTE_I2C_READ with transactions array
[17:41:50] [PASSED] DP_REMOTE_I2C_WRITE with port number
[17:41:50] [PASSED] DP_REMOTE_I2C_WRITE with I2C device ID
[17:41:50] [PASSED] DP_REMOTE_I2C_WRITE with data array
[17:41:50] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream ID
[17:41:50] [PASSED] DP_QUERY_STREAM_ENC_STATUS with client ID
[17:41:50] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream event
[17:41:50] [PASSED] DP_QUERY_STREAM_ENC_STATUS with valid stream event
[17:41:50] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream behavior
[17:41:50] [PASSED] DP_QUERY_STREAM_ENC_STATUS with a valid stream behavior
[17:41:50] ===== [PASSED] drm_test_dp_mst_sideband_msg_req_decode =====
[17:41:50] ================ [PASSED] drm_dp_mst_helper ================
[17:41:50] ================== drm_exec (7 subtests) ===================
[17:41:50] [PASSED] sanitycheck
[17:41:50] [PASSED] test_lock
[17:41:50] [PASSED] test_lock_unlock
[17:41:50] [PASSED] test_duplicates
[17:41:50] [PASSED] test_prepare
[17:41:50] [PASSED] test_prepare_array
[17:41:50] [PASSED] test_multiple_loops
[17:41:50] ==================== [PASSED] drm_exec =====================
[17:41:50] =========== drm_format_helper_test (17 subtests) ===========
[17:41:50] ============== drm_test_fb_xrgb8888_to_gray8  ==============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ========== [PASSED] drm_test_fb_xrgb8888_to_gray8 ==========
[17:41:50] ============= drm_test_fb_xrgb8888_to_rgb332  ==============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb332 ==========
[17:41:50] ============= drm_test_fb_xrgb8888_to_rgb565  ==============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb565 ==========
[17:41:50] ============ drm_test_fb_xrgb8888_to_xrgb1555  =============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======== [PASSED] drm_test_fb_xrgb8888_to_xrgb1555 =========
[17:41:50] ============ drm_test_fb_xrgb8888_to_argb1555  =============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======== [PASSED] drm_test_fb_xrgb8888_to_argb1555 =========
[17:41:50] ============ drm_test_fb_xrgb8888_to_rgba5551  =============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======== [PASSED] drm_test_fb_xrgb8888_to_rgba5551 =========
[17:41:50] ============= drm_test_fb_xrgb8888_to_rgb888  ==============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb888 ==========
[17:41:50] ============= drm_test_fb_xrgb8888_to_bgr888  ==============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ========= [PASSED] drm_test_fb_xrgb8888_to_bgr888 ==========
[17:41:50] ============ drm_test_fb_xrgb8888_to_argb8888  =============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======== [PASSED] drm_test_fb_xrgb8888_to_argb8888 =========
[17:41:50] =========== drm_test_fb_xrgb8888_to_xrgb2101010  ===========
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======= [PASSED] drm_test_fb_xrgb8888_to_xrgb2101010 =======
[17:41:50] =========== drm_test_fb_xrgb8888_to_argb2101010  ===========
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======= [PASSED] drm_test_fb_xrgb8888_to_argb2101010 =======
[17:41:50] ============== drm_test_fb_xrgb8888_to_mono  ===============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ========== [PASSED] drm_test_fb_xrgb8888_to_mono ===========
[17:41:50] ==================== drm_test_fb_swab  =====================
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ================ [PASSED] drm_test_fb_swab =================
[17:41:50] ============ drm_test_fb_xrgb8888_to_xbgr8888  =============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======== [PASSED] drm_test_fb_xrgb8888_to_xbgr8888 =========
[17:41:50] ============ drm_test_fb_xrgb8888_to_abgr8888  =============
[17:41:50] [PASSED] single_pixel_source_buffer
[17:41:50] [PASSED] single_pixel_clip_rectangle
[17:41:50] [PASSED] well_known_colors
[17:41:50] [PASSED] destination_pitch
[17:41:50] ======== [PASSED] drm_test_fb_xrgb8888_to_abgr8888 =========
[17:41:50] ================= drm_test_fb_clip_offset  =================
[17:41:50] [PASSED] pass through
[17:41:50] [PASSED] horizontal offset
[17:41:50] [PASSED] vertical offset
[17:41:50] [PASSED] horizontal and vertical offset
[17:41:50] [PASSED] horizontal offset (custom pitch)
[17:41:50] [PASSED] vertical offset (custom pitch)
[17:41:50] [PASSED] horizontal and vertical offset (custom pitch)
[17:41:50] ============= [PASSED] drm_test_fb_clip_offset =============
[17:41:50] =================== drm_test_fb_memcpy  ====================
[17:41:50] [PASSED] single_pixel_source_buffer: XR24 little-endian (0x34325258)
[17:41:50] [PASSED] single_pixel_source_buffer: XRA8 little-endian (0x38415258)
[17:41:50] [PASSED] single_pixel_source_buffer: YU24 little-endian (0x34325559)
[17:41:50] [PASSED] single_pixel_clip_rectangle: XB24 little-endian (0x34324258)
[17:41:50] [PASSED] single_pixel_clip_rectangle: XRA8 little-endian (0x38415258)
[17:41:50] [PASSED] single_pixel_clip_rectangle: YU24 little-endian (0x34325559)
[17:41:50] [PASSED] well_known_colors: XB24 little-endian (0x34324258)
[17:41:50] [PASSED] well_known_colors: XRA8 little-endian (0x38415258)
[17:41:50] [PASSED] well_known_colors: YU24 little-endian (0x34325559)
[17:41:50] [PASSED] destination_pitch: XB24 little-endian (0x34324258)
[17:41:50] [PASSED] destination_pitch: XRA8 little-endian (0x38415258)
[17:41:50] [PASSED] destination_pitch: YU24 little-endian (0x34325559)
[17:41:50] =============== [PASSED] drm_test_fb_memcpy ================
[17:41:50] ============= [PASSED] drm_format_helper_test ==============
[17:41:50] ================= drm_format (18 subtests) =================
[17:41:50] [PASSED] drm_test_format_block_width_invalid
[17:41:50] [PASSED] drm_test_format_block_width_one_plane
[17:41:50] [PASSED] drm_test_format_block_width_two_plane
[17:41:50] [PASSED] drm_test_format_block_width_three_plane
[17:41:50] [PASSED] drm_test_format_block_width_tiled
[17:41:50] [PASSED] drm_test_format_block_height_invalid
[17:41:50] [PASSED] drm_test_format_block_height_one_plane
[17:41:50] [PASSED] drm_test_format_block_height_two_plane
[17:41:50] [PASSED] drm_test_format_block_height_three_plane
[17:41:50] [PASSED] drm_test_format_block_height_tiled
[17:41:50] [PASSED] drm_test_format_min_pitch_invalid
[17:41:50] [PASSED] drm_test_format_min_pitch_one_plane_8bpp
[17:41:50] [PASSED] drm_test_format_min_pitch_one_plane_16bpp
[17:41:50] [PASSED] drm_test_format_min_pitch_one_plane_24bpp
[17:41:50] [PASSED] drm_test_format_min_pitch_one_plane_32bpp
[17:41:50] [PASSED] drm_test_format_min_pitch_two_plane
[17:41:50] [PASSED] drm_test_format_min_pitch_three_plane_8bpp
[17:41:50] [PASSED] drm_test_format_min_pitch_tiled
[17:41:50] =================== [PASSED] drm_format ====================
[17:41:50] ============== drm_framebuffer (10 subtests) ===============
[17:41:50] ========== drm_test_framebuffer_check_src_coords  ==========
[17:41:50] [PASSED] Success: source fits into fb
[17:41:50] [PASSED] Fail: overflowing fb with x-axis coordinate
[17:41:50] [PASSED] Fail: overflowing fb with y-axis coordinate
[17:41:50] [PASSED] Fail: overflowing fb with source width
[17:41:50] [PASSED] Fail: overflowing fb with source height
[17:41:50] ====== [PASSED] drm_test_framebuffer_check_src_coords ======
[17:41:50] [PASSED] drm_test_framebuffer_cleanup
[17:41:50] =============== drm_test_framebuffer_create  ===============
[17:41:50] [PASSED] ABGR8888 normal sizes
[17:41:50] [PASSED] ABGR8888 max sizes
[17:41:50] [PASSED] ABGR8888 pitch greater than min required
[17:41:50] [PASSED] ABGR8888 pitch less than min required
[17:41:50] [PASSED] ABGR8888 Invalid width
[17:41:50] [PASSED] ABGR8888 Invalid buffer handle
[17:41:50] [PASSED] No pixel format
[17:41:50] [PASSED] ABGR8888 Width 0
[17:41:50] [PASSED] ABGR8888 Height 0
[17:41:50] [PASSED] ABGR8888 Out of bound height * pitch combination
[17:41:50] [PASSED] ABGR8888 Large buffer offset
[17:41:50] [PASSED] ABGR8888 Buffer offset for inexistent plane
[17:41:50] [PASSED] ABGR8888 Invalid flag
[17:41:50] [PASSED] ABGR8888 Set DRM_MODE_FB_MODIFIERS without modifiers
[17:41:50] [PASSED] ABGR8888 Valid buffer modifier
[17:41:50] [PASSED] ABGR8888 Invalid buffer modifier(DRM_FORMAT_MOD_SAMSUNG_64_32_TILE)
[17:41:50] [PASSED] ABGR8888 Extra pitches without DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] ABGR8888 Extra pitches with DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] NV12 Normal sizes
[17:41:50] [PASSED] NV12 Max sizes
[17:41:50] [PASSED] NV12 Invalid pitch
[17:41:50] [PASSED] NV12 Invalid modifier/missing DRM_MODE_FB_MODIFIERS flag
[17:41:50] [PASSED] NV12 different  modifier per-plane
[17:41:50] [PASSED] NV12 with DRM_FORMAT_MOD_SAMSUNG_64_32_TILE
[17:41:50] [PASSED] NV12 Valid modifiers without DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] NV12 Modifier for inexistent plane
[17:41:50] [PASSED] NV12 Handle for inexistent plane
[17:41:50] [PASSED] NV12 Handle for inexistent plane without DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] YVU420 DRM_MODE_FB_MODIFIERS set without modifier
[17:41:50] [PASSED] YVU420 Normal sizes
[17:41:50] [PASSED] YVU420 Max sizes
[17:41:50] [PASSED] YVU420 Invalid pitch
[17:41:50] [PASSED] YVU420 Different pitches
[17:41:50] [PASSED] YVU420 Different buffer offsets/pitches
[17:41:50] [PASSED] YVU420 Modifier set just for plane 0, without DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] YVU420 Modifier set just for planes 0, 1, without DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] YVU420 Modifier set just for plane 0, 1, with DRM_MODE_FB_MODIFIERS
[17:41:50] [PASSED] YVU420 Valid modifier
[17:41:50] [PASSED] YVU420 Different modifiers per plane
[17:41:50] [PASSED] YVU420 Modifier for inexistent plane
[17:41:50] [PASSED] YUV420_10BIT Invalid modifier(DRM_FORMAT_MOD_LINEAR)
[17:41:50] [PASSED] X0L2 Normal sizes
[17:41:50] [PASSED] X0L2 Max sizes
[17:41:50] [PASSED] X0L2 Invalid pitch
[17:41:50] [PASSED] X0L2 Pitch greater than minimum required
[17:41:50] [PASSED] X0L2 Handle for inexistent plane
[17:41:50] [PASSED] X0L2 Offset for inexistent plane, without DRM_MODE_FB_MODIFIERS set
[17:41:50] [PASSED] X0L2 Modifier without DRM_MODE_FB_MODIFIERS set
[17:41:50] [PASSED] X0L2 Valid modifier
[17:41:50] [PASSED] X0L2 Modifier for inexistent plane
[17:41:50] =========== [PASSED] drm_test_framebuffer_create ===========
[17:41:50] [PASSED] drm_test_framebuffer_free
[17:41:50] [PASSED] drm_test_framebuffer_init
[17:41:50] [PASSED] drm_test_framebuffer_init_bad_format
[17:41:50] [PASSED] drm_test_framebuffer_init_dev_mismatch
[17:41:50] [PASSED] drm_test_framebuffer_lookup
[17:41:50] [PASSED] drm_test_framebuffer_lookup_inexistent
[17:41:50] [PASSED] drm_test_framebuffer_modifiers_not_supported
[17:41:50] ================= [PASSED] drm_framebuffer =================
[17:41:50] ================ drm_gem_shmem (8 subtests) ================
[17:41:50] [PASSED] drm_gem_shmem_test_obj_create
[17:41:50] [PASSED] drm_gem_shmem_test_obj_create_private
[17:41:50] [PASSED] drm_gem_shmem_test_pin_pages
[17:41:50] [PASSED] drm_gem_shmem_test_vmap
[17:41:50] [PASSED] drm_gem_shmem_test_get_sg_table
[17:41:50] [PASSED] drm_gem_shmem_test_get_pages_sgt
[17:41:50] [PASSED] drm_gem_shmem_test_madvise
[17:41:50] [PASSED] drm_gem_shmem_test_purge
[17:41:50] ================== [PASSED] drm_gem_shmem ==================
[17:41:50] === drm_atomic_helper_connector_hdmi_check (27 subtests) ===
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode_vic_1
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode_vic_1
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode_vic_1
[17:41:50] ====== drm_test_check_broadcast_rgb_cea_mode_yuv420  =======
[17:41:50] [PASSED] Automatic
[17:41:50] [PASSED] Full
[17:41:50] [PASSED] Limited 16:235
[17:41:50] == [PASSED] drm_test_check_broadcast_rgb_cea_mode_yuv420 ===
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_changed
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_not_changed
[17:41:50] [PASSED] drm_test_check_disable_connector
[17:41:50] [PASSED] drm_test_check_hdmi_funcs_reject_rate
[17:41:50] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_rgb
[17:41:50] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_yuv420
[17:41:50] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv422
[17:41:50] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv420
[17:41:50] [PASSED] drm_test_check_driver_unsupported_fallback_yuv420
[17:41:50] [PASSED] drm_test_check_output_bpc_crtc_mode_changed
[17:41:50] [PASSED] drm_test_check_output_bpc_crtc_mode_not_changed
[17:41:50] [PASSED] drm_test_check_output_bpc_dvi
[17:41:50] [PASSED] drm_test_check_output_bpc_format_vic_1
[17:41:50] [PASSED] drm_test_check_output_bpc_format_display_8bpc_only
[17:41:50] [PASSED] drm_test_check_output_bpc_format_display_rgb_only
[17:41:50] [PASSED] drm_test_check_output_bpc_format_driver_8bpc_only
[17:41:50] [PASSED] drm_test_check_output_bpc_format_driver_rgb_only
[17:41:50] [PASSED] drm_test_check_tmds_char_rate_rgb_8bpc
[17:41:50] [PASSED] drm_test_check_tmds_char_rate_rgb_10bpc
[17:41:50] [PASSED] drm_test_check_tmds_char_rate_rgb_12bpc
[17:41:50] ===== [PASSED] drm_atomic_helper_connector_hdmi_check ======
[17:41:50] === drm_atomic_helper_connector_hdmi_reset (6 subtests) ====
[17:41:50] [PASSED] drm_test_check_broadcast_rgb_value
[17:41:50] [PASSED] drm_test_check_bpc_8_value
[17:41:50] [PASSED] drm_test_check_bpc_10_value
[17:41:50] [PASSED] drm_test_check_bpc_12_value
[17:41:50] [PASSED] drm_test_check_format_value
[17:41:50] [PASSED] drm_test_check_tmds_char_value
[17:41:50] ===== [PASSED] drm_atomic_helper_connector_hdmi_reset ======
[17:41:50] = drm_atomic_helper_connector_hdmi_mode_valid (4 subtests) =
[17:41:50] [PASSED] drm_test_check_mode_valid
[17:41:50] [PASSED] drm_test_check_mode_valid_reject
[17:41:50] [PASSED] drm_test_check_mode_valid_reject_rate
[17:41:50] [PASSED] drm_test_check_mode_valid_reject_max_clock
[17:41:50] === [PASSED] drm_atomic_helper_connector_hdmi_mode_valid ===
[17:41:50] = drm_atomic_helper_connector_hdmi_infoframes (5 subtests) =
[17:41:50] [PASSED] drm_test_check_infoframes
[17:41:50] [PASSED] drm_test_check_reject_avi_infoframe
[17:41:50] [PASSED] drm_test_check_reject_hdr_infoframe_bpc_8
[17:41:50] [PASSED] drm_test_check_reject_hdr_infoframe_bpc_10
[17:41:50] [PASSED] drm_test_check_reject_audio_infoframe
[17:41:50] === [PASSED] drm_atomic_helper_connector_hdmi_infoframes ===
[17:41:50] ================= drm_managed (2 subtests) =================
[17:41:50] [PASSED] drm_test_managed_release_action
[17:41:50] [PASSED] drm_test_managed_run_action
[17:41:50] =================== [PASSED] drm_managed ===================
[17:41:50] =================== drm_mm (6 subtests) ====================
[17:41:50] [PASSED] drm_test_mm_init
[17:41:50] [PASSED] drm_test_mm_debug
[17:41:50] [PASSED] drm_test_mm_align32
[17:41:50] [PASSED] drm_test_mm_align64
[17:41:50] [PASSED] drm_test_mm_lowest
[17:41:50] [PASSED] drm_test_mm_highest
[17:41:50] ===================== [PASSED] drm_mm ======================
[17:41:50] ============= drm_modes_analog_tv (5 subtests) =============
[17:41:50] [PASSED] drm_test_modes_analog_tv_mono_576i
[17:41:50] [PASSED] drm_test_modes_analog_tv_ntsc_480i
[17:41:50] [PASSED] drm_test_modes_analog_tv_ntsc_480i_inlined
[17:41:50] [PASSED] drm_test_modes_analog_tv_pal_576i
[17:41:50] [PASSED] drm_test_modes_analog_tv_pal_576i_inlined
[17:41:50] =============== [PASSED] drm_modes_analog_tv ===============
[17:41:50] ============== drm_plane_helper (2 subtests) ===============
[17:41:50] =============== drm_test_check_plane_state  ================
[17:41:50] [PASSED] clipping_simple
[17:41:50] [PASSED] clipping_rotate_reflect
[17:41:50] [PASSED] positioning_simple
[17:41:50] [PASSED] upscaling
[17:41:50] [PASSED] downscaling
[17:41:50] [PASSED] rounding1
[17:41:50] [PASSED] rounding2
[17:41:50] [PASSED] rounding3
[17:41:50] [PASSED] rounding4
[17:41:50] =========== [PASSED] drm_test_check_plane_state ============
[17:41:50] =========== drm_test_check_invalid_plane_state  ============
[17:41:50] [PASSED] positioning_invalid
[17:41:50] [PASSED] upscaling_invalid
[17:41:50] [PASSED] downscaling_invalid
[17:41:50] ======= [PASSED] drm_test_check_invalid_plane_state ========
[17:41:50] ================ [PASSED] drm_plane_helper =================
[17:41:50] ====== drm_connector_helper_tv_get_modes (1 subtest) =======
[17:41:50] ====== drm_test_connector_helper_tv_get_modes_check  =======
[17:41:50] [PASSED] None
[17:41:50] [PASSED] PAL
[17:41:50] [PASSED] NTSC
[17:41:50] [PASSED] Both, NTSC Default
[17:41:50] [PASSED] Both, PAL Default
[17:41:50] [PASSED] Both, NTSC Default, with PAL on command-line
[17:41:50] [PASSED] Both, PAL Default, with NTSC on command-line
[17:41:50] == [PASSED] drm_test_connector_helper_tv_get_modes_check ===
[17:41:50] ======== [PASSED] drm_connector_helper_tv_get_modes ========
[17:41:50] ================== drm_rect (9 subtests) ===================
[17:41:50] [PASSED] drm_test_rect_clip_scaled_div_by_zero
[17:41:50] [PASSED] drm_test_rect_clip_scaled_not_clipped
[17:41:50] [PASSED] drm_test_rect_clip_scaled_clipped
[17:41:50] [PASSED] drm_test_rect_clip_scaled_signed_vs_unsigned
[17:41:50] ================= drm_test_rect_intersect  =================
[17:41:50] [PASSED] top-left x bottom-right: 2x2+1+1 x 2x2+0+0
[17:41:50] [PASSED] top-right x bottom-left: 2x2+0+0 x 2x2+1-1
[17:41:50] [PASSED] bottom-left x top-right: 2x2+1-1 x 2x2+0+0
[17:41:50] [PASSED] bottom-right x top-left: 2x2+0+0 x 2x2+1+1
[17:41:50] [PASSED] right x left: 2x1+0+0 x 3x1+1+0
[17:41:50] [PASSED] left x right: 3x1+1+0 x 2x1+0+0
[17:41:50] [PASSED] up x bottom: 1x2+0+0 x 1x3+0-1
[17:41:50] [PASSED] bottom x up: 1x3+0-1 x 1x2+0+0
[17:41:50] [PASSED] touching corner: 1x1+0+0 x 2x2+1+1
[17:41:50] [PASSED] touching side: 1x1+0+0 x 1x1+1+0
[17:41:50] [PASSED] equal rects: 2x2+0+0 x 2x2+0+0
[17:41:50] [PASSED] inside another: 2x2+0+0 x 1x1+1+1
[17:41:50] [PASSED] far away: 1x1+0+0 x 1x1+3+6
[17:41:50] [PASSED] points intersecting: 0x0+5+10 x 0x0+5+10
[17:41:50] [PASSED] points not intersecting: 0x0+0+0 x 0x0+5+10
[17:41:50] ============= [PASSED] drm_test_rect_intersect =============
[17:41:50] ================ drm_test_rect_calc_hscale  ================
[17:41:50] [PASSED] normal use
[17:41:50] [PASSED] out of max range
[17:41:50] [PASSED] out of min range
[17:41:50] [PASSED] zero dst
[17:41:50] [PASSED] negative src
[17:41:50] [PASSED] negative dst
[17:41:50] ============ [PASSED] drm_test_rect_calc_hscale ============
[17:41:50] ================ drm_test_rect_calc_vscale  ================
[17:41:50] [PASSED] normal use
[17:41:50] [PASSED] out of max range
[17:41:50] [PASSED] out of min range
[17:41:50] [PASSED] zero dst
[17:41:50] [PASSED] negative src
[17:41:50] [PASSED] negative dst
[17:41:50] ============ [PASSED] drm_test_rect_calc_vscale ============
[17:41:50] ================== drm_test_rect_rotate  ===================
[17:41:50] [PASSED] reflect-x
[17:41:50] [PASSED] reflect-y
[17:41:50] [PASSED] rotate-0
[17:41:50] [PASSED] rotate-90
[17:41:50] [PASSED] rotate-180
[17:41:50] [PASSED] rotate-270
[17:41:50] ============== [PASSED] drm_test_rect_rotate ===============
[17:41:50] ================ drm_test_rect_rotate_inv  =================
[17:41:50] [PASSED] reflect-x
[17:41:50] [PASSED] reflect-y
[17:41:50] [PASSED] rotate-0
[17:41:50] [PASSED] rotate-90
[17:41:50] [PASSED] rotate-180
[17:41:50] [PASSED] rotate-270
[17:41:50] ============ [PASSED] drm_test_rect_rotate_inv =============
[17:41:50] ==================== [PASSED] drm_rect =====================
[17:41:50] ============ drm_sysfb_modeset_test (1 subtest) ============
[17:41:50] ============ drm_test_sysfb_build_fourcc_list  =============
[17:41:50] [PASSED] no native formats
[17:41:50] [PASSED] XRGB8888 as native format
[17:41:50] [PASSED] remove duplicates
[17:41:50] [PASSED] convert alpha formats
[17:41:50] [PASSED] random formats
[17:41:50] ======== [PASSED] drm_test_sysfb_build_fourcc_list =========
[17:41:50] ============= [PASSED] drm_sysfb_modeset_test ==============
[17:41:50] ================== drm_fixp (2 subtests) ===================
[17:41:50] [PASSED] drm_test_int2fixp
[17:41:50] [PASSED] drm_test_sm2fixp
[17:41:50] ==================== [PASSED] drm_fixp =====================
[17:41:50] ============================================================
[17:41:50] Testing complete. Ran 621 tests: passed: 621
[17:41:50] Elapsed time: 26.109s total, 1.750s configuring, 24.190s building, 0.118s running

+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/ttm/tests/.kunitconfig [17:41:50] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[17:41:52] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[17:42:01] Starting KUnit Kernel (1/1)...
[17:42:01] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[17:42:02] ================= ttm_device (5 subtests) ==================
[17:42:02] [PASSED] ttm_device_init_basic
[17:42:02] [PASSED] ttm_device_init_multiple
[17:42:02] [PASSED] ttm_device_fini_basic
[17:42:02] [PASSED] ttm_device_init_no_vma_man
[17:42:02] ================== ttm_device_init_pools  ==================
[17:42:02] [PASSED] No DMA allocations, no DMA32 required
[17:42:02] [PASSED] DMA allocations, DMA32 required
[17:42:02] [PASSED] No DMA allocations, DMA32 required
[17:42:02] [PASSED] DMA allocations, no DMA32 required
[17:42:02] ============== [PASSED] ttm_device_init_pools ==============
[17:42:02] =================== [PASSED] ttm_device ====================
[17:42:02] ================== ttm_pool (8 subtests) ===================
[17:42:02] ================== ttm_pool_alloc_basic  ===================
[17:42:02] [PASSED] One page
[17:42:02] [PASSED] More than one page
[17:42:02] [PASSED] Above the allocation limit
[17:42:02] [PASSED] One page, with coherent DMA mappings enabled
[17:42:02] [PASSED] Above the allocation limit, with coherent DMA mappings enabled
[17:42:02] ============== [PASSED] ttm_pool_alloc_basic ===============
[17:42:02] ============== ttm_pool_alloc_basic_dma_addr  ==============
[17:42:02] [PASSED] One page
[17:42:02] [PASSED] More than one page
[17:42:02] [PASSED] Above the allocation limit
[17:42:02] [PASSED] One page, with coherent DMA mappings enabled
[17:42:02] [PASSED] Above the allocation limit, with coherent DMA mappings enabled
[17:42:02] ========== [PASSED] ttm_pool_alloc_basic_dma_addr ==========
[17:42:02] [PASSED] ttm_pool_alloc_order_caching_match
[17:42:02] [PASSED] ttm_pool_alloc_caching_mismatch
[17:42:02] [PASSED] ttm_pool_alloc_order_mismatch
[17:42:02] [PASSED] ttm_pool_free_dma_alloc
[17:42:02] [PASSED] ttm_pool_free_no_dma_alloc
[17:42:02] [PASSED] ttm_pool_fini_basic
[17:42:02] ==================== [PASSED] ttm_pool =====================
[17:42:02] ================ ttm_resource (8 subtests) =================
[17:42:02] ================= ttm_resource_init_basic  =================
[17:42:02] [PASSED] Init resource in TTM_PL_SYSTEM
[17:42:02] [PASSED] Init resource in TTM_PL_VRAM
[17:42:02] [PASSED] Init resource in a private placement
[17:42:02] [PASSED] Init resource in TTM_PL_SYSTEM, set placement flags
[17:42:02] ============= [PASSED] ttm_resource_init_basic =============
[17:42:02] [PASSED] ttm_resource_init_pinned
[17:42:02] [PASSED] ttm_resource_fini_basic
[17:42:02] [PASSED] ttm_resource_manager_init_basic
[17:42:02] [PASSED] ttm_resource_manager_usage_basic
[17:42:02] [PASSED] ttm_resource_manager_set_used_basic
[17:42:02] [PASSED] ttm_sys_man_alloc_basic
[17:42:02] [PASSED] ttm_sys_man_free_basic
[17:42:02] ================== [PASSED] ttm_resource ===================
[17:42:02] =================== ttm_tt (15 subtests) ===================
[17:42:02] ==================== ttm_tt_init_basic  ====================
[17:42:02] [PASSED] Page-aligned size
[17:42:02] [PASSED] Extra pages requested
[17:42:02] ================ [PASSED] ttm_tt_init_basic ================
[17:42:02] [PASSED] ttm_tt_init_misaligned
[17:42:02] [PASSED] ttm_tt_fini_basic
[17:42:02] [PASSED] ttm_tt_fini_sg
[17:42:02] [PASSED] ttm_tt_fini_shmem
[17:42:02] [PASSED] ttm_tt_create_basic
[17:42:02] [PASSED] ttm_tt_create_invalid_bo_type
[17:42:02] [PASSED] ttm_tt_create_ttm_exists
[17:42:02] [PASSED] ttm_tt_create_failed
[17:42:02] [PASSED] ttm_tt_destroy_basic
[17:42:02] [PASSED] ttm_tt_populate_null_ttm
[17:42:02] [PASSED] ttm_tt_populate_populated_ttm
[17:42:02] [PASSED] ttm_tt_unpopulate_basic
[17:42:02] [PASSED] ttm_tt_unpopulate_empty_ttm
[17:42:02] [PASSED] ttm_tt_swapin_basic
[17:42:02] ===================== [PASSED] ttm_tt ======================
[17:42:02] =================== ttm_bo (14 subtests) ===================
[17:42:02] =========== ttm_bo_reserve_optimistic_no_ticket  ===========
[17:42:02] [PASSED] Cannot be interrupted and sleeps
[17:42:02] [PASSED] Cannot be interrupted, locks straight away
[17:42:02] [PASSED] Can be interrupted, sleeps
[17:42:02] ======= [PASSED] ttm_bo_reserve_optimistic_no_ticket =======
[17:42:02] [PASSED] ttm_bo_reserve_locked_no_sleep
[17:42:02] [PASSED] ttm_bo_reserve_no_wait_ticket
[17:42:02] [PASSED] ttm_bo_reserve_double_resv
[17:42:02] [PASSED] ttm_bo_reserve_interrupted
[17:42:02] [PASSED] ttm_bo_reserve_deadlock
[17:42:02] [PASSED] ttm_bo_unreserve_basic
[17:42:02] [PASSED] ttm_bo_unreserve_pinned
[17:42:02] [PASSED] ttm_bo_unreserve_bulk
[17:42:02] [PASSED] ttm_bo_fini_basic
[17:42:02] [PASSED] ttm_bo_fini_shared_resv
[17:42:02] [PASSED] ttm_bo_pin_basic
[17:42:02] [PASSED] ttm_bo_pin_unpin_resource
[17:42:02] [PASSED] ttm_bo_multiple_pin_one_unpin
[17:42:02] ===================== [PASSED] ttm_bo ======================
[17:42:02] ============== ttm_bo_validate (22 subtests) ===============
[17:42:02] ============== ttm_bo_init_reserved_sys_man  ===============
[17:42:02] [PASSED] Buffer object for userspace
[17:42:02] [PASSED] Kernel buffer object
[17:42:02] [PASSED] Shared buffer object
[17:42:02] ========== [PASSED] ttm_bo_init_reserved_sys_man ===========
[17:42:02] ============== ttm_bo_init_reserved_mock_man  ==============
[17:42:02] [PASSED] Buffer object for userspace
[17:42:02] [PASSED] Kernel buffer object
[17:42:02] [PASSED] Shared buffer object
[17:42:02] ========== [PASSED] ttm_bo_init_reserved_mock_man ==========
[17:42:02] [PASSED] ttm_bo_init_reserved_resv
[17:42:02] ================== ttm_bo_validate_basic  ==================
[17:42:02] [PASSED] Buffer object for userspace
[17:42:02] [PASSED] Kernel buffer object
[17:42:02] [PASSED] Shared buffer object
[17:42:02] ============== [PASSED] ttm_bo_validate_basic ==============
[17:42:02] [PASSED] ttm_bo_validate_invalid_placement
[17:42:02] ============= ttm_bo_validate_same_placement  ==============
[17:42:02] [PASSED] System manager
[17:42:02] [PASSED] VRAM manager
[17:42:02] ========= [PASSED] ttm_bo_validate_same_placement ==========
[17:42:02] [PASSED] ttm_bo_validate_failed_alloc
[17:42:02] [PASSED] ttm_bo_validate_pinned
[17:42:02] [PASSED] ttm_bo_validate_busy_placement
[17:42:02] ================ ttm_bo_validate_multihop  =================
[17:42:02] [PASSED] Buffer object for userspace
[17:42:02] [PASSED] Kernel buffer object
[17:42:02] [PASSED] Shared buffer object
[17:42:02] ============ [PASSED] ttm_bo_validate_multihop =============
[17:42:02] ========== ttm_bo_validate_no_placement_signaled  ==========
[17:42:02] [PASSED] Buffer object in system domain, no page vector
[17:42:02] [PASSED] Buffer object in system domain with an existing page vector
[17:42:02] ====== [PASSED] ttm_bo_validate_no_placement_signaled ======
[17:42:02] ======== ttm_bo_validate_no_placement_not_signaled  ========
[17:42:02] [PASSED] Buffer object for userspace
[17:42:02] [PASSED] Kernel buffer object
[17:42:02] [PASSED] Shared buffer object
[17:42:02] ==== [PASSED] ttm_bo_validate_no_placement_not_signaled ====
[17:42:02] [PASSED] ttm_bo_validate_move_fence_signaled
[17:42:02] ========= ttm_bo_validate_move_fence_not_signaled  =========
[17:42:02] [PASSED] Waits for GPU
[17:42:02] [PASSED] Tries to lock straight away
[17:42:02] ===== [PASSED] ttm_bo_validate_move_fence_not_signaled =====
[17:42:02] [PASSED] ttm_bo_validate_swapout
[17:42:02] [PASSED] ttm_bo_validate_happy_evict
[17:42:02] [PASSED] ttm_bo_validate_all_pinned_evict
[17:42:02] [PASSED] ttm_bo_validate_allowed_only_evict
[17:42:02] [PASSED] ttm_bo_validate_deleted_evict
[17:42:02] [PASSED] ttm_bo_validate_busy_domain_evict
[17:42:02] [PASSED] ttm_bo_validate_evict_gutting
[17:42:02] [PASSED] ttm_bo_validate_recrusive_evict
[17:42:02] ================= [PASSED] ttm_bo_validate =================
[17:42:02] ============================================================
[17:42:02] Testing complete. Ran 102 tests: passed: 102
[17:42:02] Elapsed time: 11.590s total, 1.768s configuring, 9.557s building, 0.234s running

+ cleanup
++ stat -c %u:%g /kernel
+ chown -R 1003:1003 /kernel

#3 lore raw

✓ Xe.CI.BAT: success for drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF
URL : https://patchwork.freedesktop.org/series/167391/
State : success

== Summary ==

CI Bug Log - changes from xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb_BAT -> xe-pw-167391v1_BAT
====================================================

Summary
-------

**SUCCESS**

No regressions found.

Participating hosts (13 -> 13)
------------------------------

No changes in participating hosts

Changes
-------

No changes found

Build changes
-------------

* Linux: xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb -> xe-pw-167391v1

IGT_8939: 8939
xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb: 11a8456527f00d86dc8b23035c324da194fbbadb
xe-pw-167391v1: 167391v1

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/index.html

#4 lore raw

✗ Xe.CI.FULL: failure for drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: drm/xe/ggtt: use full-range drm_mm with reserved nodes on PF
URL : https://patchwork.freedesktop.org/series/167391/
State : failure

== Summary ==

CI Bug Log - changes from xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb_FULL -> xe-pw-167391v1_FULL
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with xe-pw-167391v1_FULL absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes
introduced in xe-pw-167391v1_FULL, please notify your bug team ([email protected]) to allow them to document this new failure mode, which will reduce false positives in CI.

Participating hosts (2 -> 2)
------------------------------

No changes in participating hosts

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in xe-pw-167391v1_FULL:

### IGT changes ###

#### Possible regressions ####

* igt@kms_atomic_transition@plane-all-transition:
- shard-bmg: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

Known issues
------------

Here are the changes found in xe-pw-167391v1_FULL that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@fbdev@unaligned-write:
- shard-bmg: [PASS][3] -> [FAIL][4] ([Intel XE#7950])
[3]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_addfb_basic@addfb25-y-tiled-small-legacy:
- shard-bmg: NOTRUN -> [SKIP][5] ([Intel XE#2233])
[5]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_atomic_transition@plane-all-transition@pipe-b-hdmi-a-3:
- shard-bmg: [PASS][6] -> [DMESG-FAIL][7] ([Intel XE#5545] / [Intel XE#7774])
[6]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_atomic_transition@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@kms_atomic_transition@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-0-hflip:
- shard-lnl: NOTRUN -> [SKIP][8] ([Intel XE#1407]) +4 other tests skip
[8]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-64bpp-rotate-180-hflip-async-flip:
- shard-lnl: NOTRUN -> [SKIP][9] ([Intel XE#3658] / [Intel XE#7360]) +1 other test skip
[9]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@kms_big_fb@4-tiled-max-hw-stride-64bpp-rotate-180-hflip-async-flip.html

* igt@kms_big_fb@x-tiled-16bpp-rotate-90:
- shard-bmg: NOTRUN -> [SKIP][10] ([Intel XE#2327]) +2 other tests skip
[10]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_big_fb@y-tiled-addfb-size-overflow:
- shard-lnl: NOTRUN -> [SKIP][11] ([Intel XE#1428] / [Intel XE#7387])
[11]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-8/igt@[email protected]

* igt@kms_big_fb@yf-tiled-16bpp-rotate-180:
- shard-lnl: NOTRUN -> [SKIP][12] ([Intel XE#1124]) +13 other tests skip
[12]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_big_fb@yf-tiled-addfb:
- shard-bmg: NOTRUN -> [SKIP][13] ([Intel XE#2328] / [Intel XE#7367])
[13]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_big_fb@yf-tiled-addfb-size-offset-overflow:
- shard-bmg: NOTRUN -> [SKIP][14] ([Intel XE#607] / [Intel XE#7361])
[14]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-0-hflip:
- shard-bmg: NOTRUN -> [SKIP][15] ([Intel XE#1124]) +12 other tests skip
[15]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_bw@connected-linear-tiling-2-displays-target-3840x2160p:
- shard-bmg: NOTRUN -> [SKIP][16] ([Intel XE#7679]) +1 other test skip
[16]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-8/igt@[email protected]

* igt@kms_bw@connected-linear-tiling-3-displays-target-2160x1440p:
- shard-lnl: NOTRUN -> [SKIP][17] ([Intel XE#7679]) +2 other tests skip
[17]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@kms_bw@connected-linear-tiling-4-displays-target-1920x1080p:
- shard-lnl: NOTRUN -> [SKIP][18] ([Intel XE#7676]) +1 other test skip
[18]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_bw@linear-tiling-1-displays-target-1920x1080p:
- shard-bmg: NOTRUN -> [SKIP][19] ([Intel XE#367]) +4 other tests skip
[19]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_bw@linear-tiling-3-displays-target-2560x1440p:
- shard-lnl: NOTRUN -> [SKIP][20] ([Intel XE#367])
[20]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_ccs@bad-aux-stride-yf-tiled-ccs:
- shard-bmg: NOTRUN -> [SKIP][21] ([Intel XE#2887]) +20 other tests skip
[21]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@kms_ccs@crc-primary-suspend-4-tiled-lnl-ccs@pipe-d-hdmi-a-3:
- shard-bmg: NOTRUN -> [SKIP][22] ([Intel XE#2652]) +35 other tests skip
[22]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-primary-suspend-y-tiled-gen12-rc-ccs-cc:
- shard-lnl: NOTRUN -> [SKIP][23] ([Intel XE#3432]) +2 other tests skip
[23]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][24] ([Intel XE#3432])
[24]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-dg2-mc-ccs:
- shard-lnl: NOTRUN -> [SKIP][25] ([Intel XE#2887]) +15 other tests skip
[25]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_chamelium_color@ctm-0-25:
- shard-bmg: NOTRUN -> [SKIP][26] ([Intel XE#2325] / [Intel XE#7358]) +2 other tests skip
[26]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_chamelium_color@ctm-0-75:
- shard-lnl: NOTRUN -> [SKIP][27] ([Intel XE#306] / [Intel XE#7358])
[27]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_chamelium_edid@dp-edid-change-during-hibernate:
- shard-bmg: NOTRUN -> [SKIP][28] ([Intel XE#2252]) +11 other tests skip
[28]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_chamelium_frames@hdmi-crc-single:
- shard-lnl: NOTRUN -> [SKIP][29] ([Intel XE#373]) +10 other tests skip
[29]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0-hdcp14:
- shard-bmg: NOTRUN -> [SKIP][30] ([Intel XE#6974])
[30]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_content_protection@dp-mst-type-0-suspend-resume:
- shard-lnl: NOTRUN -> [SKIP][31] ([Intel XE#6974]) +2 other tests skip
[31]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_content_protection@legacy:
- shard-bmg: NOTRUN -> [FAIL][32] ([Intel XE#1178] / [Intel XE#3304] / [Intel XE#7374]) +3 other tests fail
[32]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_content_protection@lic-type-1:
- shard-bmg: NOTRUN -> [SKIP][33] ([Intel XE#7642]) +1 other test skip
[33]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_content_protection@mei-interface:
- shard-lnl: NOTRUN -> [SKIP][34] ([Intel XE#1468] / [Intel XE#7396])
[34]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_content_protection@type1:
- shard-lnl: NOTRUN -> [SKIP][35] ([Intel XE#7642]) +1 other test skip
[35]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@kms_cursor_crc@cursor-offscreen-128x42:
- shard-bmg: NOTRUN -> [SKIP][36] ([Intel XE#2320]) +9 other tests skip
[36]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_cursor_crc@cursor-random-512x170:
- shard-lnl: NOTRUN -> [SKIP][37] ([Intel XE#2321] / [Intel XE#7355]) +1 other test skip
[37]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][38] ([Intel XE#2321] / [Intel XE#7355]) +3 other tests skip
[38]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_cursor_crc@cursor-rapid-movement-max-size:
- shard-lnl: NOTRUN -> [SKIP][39] ([Intel XE#1424]) +6 other tests skip
[39]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-atomic:
- shard-lnl: NOTRUN -> [SKIP][40] ([Intel XE#309] / [Intel XE#7343]) +1 other test skip
[40]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]

* igt@kms_dp_link_training@non-uhbr-mst:
- shard-bmg: NOTRUN -> [SKIP][41] ([Intel XE#4354] / [Intel XE#5882])
[41]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_dp_link_training@uhbr-mst:
- shard-bmg: NOTRUN -> [SKIP][42] ([Intel XE#4354] / [Intel XE#7386])
[42]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_dp_linktrain_fallback@dp-fallback:
- shard-lnl: NOTRUN -> [SKIP][43] ([Intel XE#4294] / [Intel XE#7477])
[43]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_dsc@dsc-fractional-bpp-with-bpc:
- shard-bmg: NOTRUN -> [SKIP][44] ([Intel XE#2244]) +1 other test skip
[44]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_dsc@dsc-with-bpc:
- shard-lnl: NOTRUN -> [SKIP][45] ([Intel XE#2244])
[45]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_fbc_dirty_rect@fbc-dirty-rectangle-out-visible-area:
- shard-lnl: NOTRUN -> [SKIP][46] ([Intel XE#4422] / [Intel XE#7442])
[46]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][47] ([Intel XE#4422] / [Intel XE#7442]) +1 other test skip
[47]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-bmg: NOTRUN -> [SKIP][48] ([Intel XE#4156] / [Intel XE#7425])
[48]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_fbcon_fbt@psr:
- shard-bmg: NOTRUN -> [SKIP][49] ([Intel XE#6126] / [Intel XE#776])
[49]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@kms_feature_discovery@chamelium:
- shard-lnl: NOTRUN -> [SKIP][50] ([Intel XE#701] / [Intel XE#7359])
[50]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-8/igt@[email protected]

* igt@kms_feature_discovery@display-3x:
- shard-bmg: NOTRUN -> [SKIP][51] ([Intel XE#2373] / [Intel XE#7448])
[51]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_feature_discovery@dp-mst:
- shard-bmg: NOTRUN -> [SKIP][52] ([Intel XE#2375])
[52]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_feature_discovery@psr1:
- shard-bmg: NOTRUN -> [SKIP][53] ([Intel XE#2374] / [Intel XE#6127])
[53]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_flip@2x-blocking-absolute-wf_vblank-interruptible:
- shard-lnl: NOTRUN -> [SKIP][54] ([Intel XE#1421]) +7 other tests skip
[54]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@kms_flip@2x-blocking-absolute-wf_vblank-interruptible.html

* igt@kms_flip@2x-flip-vs-expired-vblank@bc-dp2-hdmi-a3:
- shard-bmg: [PASS][55] -> [FAIL][56] ([Intel XE#3321])
[55]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_flip@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-4/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-32bpp-4tiledg2rcccs-upscaling:
- shard-lnl: NOTRUN -> [SKIP][57] ([Intel XE#7178] / [Intel XE#7349])
[57]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-32bpp-4tiledg2rcccs-upscaling.html

* igt@kms_flip_scaled_crc@flip-32bpp-yuv-linear-to-32bpp-yuv-linear-reflect-x:
- shard-bmg: NOTRUN -> [SKIP][58] ([Intel XE#7179])
[58]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@kms_flip_scaled_crc@flip-32bpp-yuv-linear-to-32bpp-yuv-linear-reflect-x.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-downscaling:
- shard-bmg: NOTRUN -> [SKIP][59] ([Intel XE#7178] / [Intel XE#7349]) +1 other test skip
[59]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-downscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-xtile-to-32bpp-xtile-downscaling:
- shard-lnl: NOTRUN -> [SKIP][60] ([Intel XE#1397] / [Intel XE#1745] / [Intel XE#7385])
[60]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@kms_flip_scaled_crc@flip-64bpp-xtile-to-32bpp-xtile-downscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-xtile-to-32bpp-xtile-downscaling@pipe-a-default-mode:
- shard-lnl: NOTRUN -> [SKIP][61] ([Intel XE#1397] / [Intel XE#7385])
[61]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@kms_flip_scaled_crc@flip-64bpp-xtile-to-32bpp-xtile-downscaling@pipe-a-default-mode.html

* igt@kms_flip_scaled_crc@flip-64bpp-yftile-to-16bpp-yftile-upscaling:
- shard-lnl: NOTRUN -> [SKIP][62] ([Intel XE#7178] / [Intel XE#7351]) +3 other tests skip
[62]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@kms_flip_scaled_crc@flip-64bpp-yftile-to-16bpp-yftile-upscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-16bpp-ytile-downscaling:
- shard-bmg: NOTRUN -> [SKIP][63] ([Intel XE#7178] / [Intel XE#7351]) +5 other tests skip
[63]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-16bpp-ytile-downscaling.html

* igt@kms_frontbuffer_tracking@drrshdr-2p-primscrn-pri-indfb-draw-mmap-wc:
- shard-lnl: NOTRUN -> [SKIP][64] ([Intel XE#7905]) +46 other tests skip
[64]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@kms_frontbuffer_tracking@drrshdr-2p-primscrn-pri-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbc-1p-offscreen-pri-shrfb-draw-blt:
- shard-bmg: NOTRUN -> [SKIP][65] ([Intel XE#4141]) +24 other tests skip
[65]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@kms_frontbuffer_tracking@fbc-1p-offscreen-pri-shrfb-draw-blt.html

* igt@kms_frontbuffer_tracking@fbc-abgr161616f-draw-render:
- shard-bmg: NOTRUN -> [SKIP][66] ([Intel XE#7061] / [Intel XE#7356]) +9 other tests skip
[66]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcdrrs-1p-offscreen-pri-indfb-draw-blt:
- shard-lnl: NOTRUN -> [SKIP][67] ([Intel XE#6312]) +19 other tests skip
[67]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@kms_frontbuffer_tracking@fbcdrrs-1p-offscreen-pri-indfb-draw-blt.html

* igt@kms_frontbuffer_tracking@fbcdrrs-abgr161616f-draw-blt:
- shard-lnl: NOTRUN -> [SKIP][68] ([Intel XE#7061] / [Intel XE#7356]) +4 other tests skip
[68]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcdrrs-modesetfrombusy:
- shard-lnl: NOTRUN -> [SKIP][69] ([Intel XE#6312] / [Intel XE#651]) +9 other tests skip
[69]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcdrrshdr-rgb565-draw-blt:
- shard-bmg: NOTRUN -> [SKIP][70] ([Intel XE#2311]) +86 other tests skip
[70]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbchdr-abgr161616f-draw-mmap-wc:
- shard-lnl: NOTRUN -> [SKIP][71] ([Intel XE#7061]) +4 other tests skip
[71]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbchdr-argb161616f-draw-render:
- shard-bmg: NOTRUN -> [SKIP][72] ([Intel XE#7061]) +6 other tests skip
[72]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsrhdr-tiling-y:
- shard-bmg: NOTRUN -> [SKIP][73] ([Intel XE#7399])
[73]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-blt:
- shard-lnl: NOTRUN -> [SKIP][74] ([Intel XE#656] / [Intel XE#7905]) +49 other tests skip
[74]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_frontbuffer_tracking@psrhdr-1p-pri-indfb-multidraw:
- shard-bmg: NOTRUN -> [SKIP][75] ([Intel XE#2313]) +87 other tests skip
[75]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_frontbuffer_tracking@psrhdr-1p-primscrn-indfb-plflip-blt:
- shard-lnl: NOTRUN -> [SKIP][76] ([Intel XE#7865]) +29 other tests skip
[76]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@kms_frontbuffer_tracking@psrhdr-1p-primscrn-indfb-plflip-blt.html

* igt@kms_hdr@brightness-with-hdr:
- shard-lnl: NOTRUN -> [SKIP][77] ([Intel XE#3544] / [Intel XE#7915])
[77]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-8/igt@[email protected]

* igt@kms_hdr@brightness-with-hdr@pipe-a-edp-1-xrgb2101010:
- shard-lnl: NOTRUN -> [SKIP][78] ([Intel XE#7915]) +3 other tests skip
[78]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-8/igt@kms_hdr@[email protected]

* igt@kms_hdr@static-toggle:
- shard-lnl: NOTRUN -> [SKIP][79] ([Intel XE#1503] / [Intel XE#7915])
[79]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@kms_joiner@basic-big-joiner:
- shard-lnl: NOTRUN -> [SKIP][80] ([Intel XE#6901]) +1 other test skip
[80]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][81] ([Intel XE#6901])
[81]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_joiner@basic-ultra-joiner:
- shard-bmg: NOTRUN -> [SKIP][82] ([Intel XE#6911] / [Intel XE#7378])
[82]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_joiner@invalid-modeset-force-big-joiner:
- shard-lnl: NOTRUN -> [SKIP][83] ([Intel XE#7086] / [Intel XE#7390])
[83]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_plane@pixel-format-4-tiled-modifier@pipe-b-plane-5:
- shard-bmg: NOTRUN -> [SKIP][84] ([Intel XE#7130]) +3 other tests skip
[84]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@kms_plane@[email protected]

* igt@kms_plane@pixel-format-x-tiled-modifier@pipe-b-plane-5:
- shard-lnl: NOTRUN -> [SKIP][85] ([Intel XE#7130]) +1 other test skip
[85]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-3/igt@kms_plane@[email protected]

* igt@kms_plane@pixel-format-y-tiled-ccs-modifier-source-clamping:
- shard-bmg: NOTRUN -> [SKIP][86] ([Intel XE#7283]) +5 other tests skip
[86]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_plane@pixel-format-yf-tiled-ccs-modifier-source-clamping:
- shard-lnl: NOTRUN -> [SKIP][87] ([Intel XE#7283]) +1 other test skip
[87]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@kms_plane@pixel-format-yf-tiled-ccs-modifier-source-clamping.html

* igt@kms_plane@planar-pixel-format-settings@nv12-tile4-src-y:
- shard-bmg: NOTRUN -> [SKIP][88] ([Intel XE#8076])
[88]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@kms_plane@[email protected]

* igt@kms_plane_multiple@2x-tiling-y:
- shard-lnl: NOTRUN -> [SKIP][89] ([Intel XE#4596] / [Intel XE#5854]) +2 other tests skip
[89]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_plane_multiple@2x-tiling-yf:
- shard-bmg: NOTRUN -> [SKIP][90] ([Intel XE#5021] / [Intel XE#7377]) +1 other test skip
[90]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_plane_multiple@tiling-y:
- shard-lnl: NOTRUN -> [SKIP][91] ([Intel XE#5020] / [Intel XE#7348])
[91]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-75@pipe-a:
- shard-bmg: NOTRUN -> [SKIP][92] ([Intel XE#2763] / [Intel XE#6886]) +9 other tests skip
[92]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-75@pipe-b:
- shard-lnl: NOTRUN -> [SKIP][93] ([Intel XE#2763] / [Intel XE#6886]) +15 other tests skip
[93]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@kms_plane_scaling@[email protected]

* igt@kms_pm_backlight@bad-brightness:
- shard-bmg: NOTRUN -> [SKIP][94] ([Intel XE#7376] / [Intel XE#7760] / [Intel XE#870])
[94]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@kms_pm_backlight@brightness-with-dpms:
- shard-bmg: NOTRUN -> [SKIP][95] ([Intel XE#2938] / [Intel XE#7376] / [Intel XE#7760])
[95]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@kms_pm_dc@dc3co-vpb-simulation:
- shard-bmg: NOTRUN -> [SKIP][96] ([Intel XE#7794])
[96]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_pm_lpsp@kms-lpsp:
- shard-bmg: NOTRUN -> [SKIP][97] ([Intel XE#2499])
[97]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_psr2_sf@fbc-pr-overlay-primary-update-sf-dmg-area:
- shard-lnl: NOTRUN -> [SKIP][98] ([Intel XE#2893] / [Intel XE#7304]) +3 other tests skip
[98]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-cursor-plane-update-sf:
- shard-lnl: NOTRUN -> [SKIP][99] ([Intel XE#2893] / [Intel XE#4608] / [Intel XE#7304]) +2 other tests skip
[99]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-overlay-plane-move-continuous-sf@pipe-a-edp-1:
- shard-lnl: NOTRUN -> [SKIP][100] ([Intel XE#4608]) +2 other tests skip
[100]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@kms_psr2_sf@[email protected]

* igt@kms_psr2_sf@fbc-psr2-primary-plane-update-sf-dmg-area@pipe-b-edp-1:
- shard-lnl: NOTRUN -> [SKIP][101] ([Intel XE#4608] / [Intel XE#7304]) +2 other tests skip
[101]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-3/igt@kms_psr2_sf@[email protected]

* igt@kms_psr2_sf@psr2-overlay-plane-move-continuous-sf:
- shard-bmg: NOTRUN -> [SKIP][102] ([Intel XE#1489]) +10 other tests skip
[102]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_psr2_su@page_flip-p010:
- shard-bmg: NOTRUN -> [SKIP][103] ([Intel XE#2387] / [Intel XE#7429])
[103]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-8/igt@kms_psr2_su@page_flip-p010.html

* igt@kms_psr@fbc-pr-cursor-plane-move:
- shard-lnl: NOTRUN -> [SKIP][104] ([Intel XE#1406]) +1 other test skip
[104]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@kms_psr@fbc-psr2-primary-render:
- shard-lnl: NOTRUN -> [SKIP][105] ([Intel XE#1406] / [Intel XE#7345]) +2 other tests skip
[105]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]

* igt@kms_psr@fbc-psr2-primary-render@edp-1:
- shard-lnl: NOTRUN -> [SKIP][106] ([Intel XE#1406] / [Intel XE#4609]) +2 other tests skip
[106]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@kms_psr@[email protected]

* igt@kms_psr@psr-basic:
- shard-bmg: NOTRUN -> [SKIP][107] ([Intel XE#2234] / [Intel XE#2850]) +19 other tests skip
[107]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_rotation_crc@primary-y-tiled-reflect-x-0:
- shard-bmg: NOTRUN -> [SKIP][108] ([Intel XE#2330] / [Intel XE#5813])
[108]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_rotation_crc@sprite-rotation-90:
- shard-bmg: NOTRUN -> [SKIP][109] ([Intel XE#3904] / [Intel XE#7342]) +3 other tests skip
[109]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_scaling_modes@scaling-mode-full-aspect:
- shard-bmg: NOTRUN -> [SKIP][110] ([Intel XE#2413])
[110]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-8/igt@[email protected]

* igt@kms_setmode@invalid-clone-single-crtc-stealing:
- shard-lnl: NOTRUN -> [SKIP][111] ([Intel XE#1435]) +1 other test skip
[111]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@kms_sharpness_filter@filter-basic:
- shard-bmg: NOTRUN -> [SKIP][112] ([Intel XE#6503]) +2 other tests skip
[112]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern-with-chamelium:
- shard-bmg: NOTRUN -> [SKIP][113] ([Intel XE#2426] / [Intel XE#5848])
[113]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@kms_tv_load_detect@load-detect:
- shard-bmg: NOTRUN -> [SKIP][114] ([Intel XE#2450] / [Intel XE#5857])
[114]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_vrr@flip-suspend:
- shard-bmg: NOTRUN -> [SKIP][115] ([Intel XE#1499]) +1 other test skip
[115]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@kms_vrr@negative-basic:
- shard-lnl: NOTRUN -> [SKIP][116] ([Intel XE#1499]) +1 other test skip
[116]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@kms_vrr@seamless-rr-switch-virtual@pipe-a-edp-1:
- shard-lnl: NOTRUN -> [FAIL][117] ([Intel XE#2142]) +1 other test fail
[117]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-3/igt@kms_vrr@[email protected]

* igt@xe_ccs@vm-bind-decompress:
- shard-lnl: NOTRUN -> [SKIP][118] ([Intel XE#7644])
[118]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_compute@ccs-mode-basic:
- shard-bmg: NOTRUN -> [SKIP][119] ([Intel XE#6599])
[119]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@xe_configfs@survivability-mode:
- shard-lnl: NOTRUN -> [SKIP][120] ([Intel XE#6010] / [Intel XE#7317] / [Intel XE#7455])
[120]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_copy_basic@mem-page-copy-17:
- shard-lnl: [PASS][121] -> [ABORT][122] ([Intel XE#8007])
[121]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-lnl-3/igt@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-5/igt@[email protected]

* igt@xe_create@invalid-pad:
- shard-bmg: [PASS][123] -> [SKIP][124] ([Intel XE#6557] / [Intel XE#6703]) +1 other test skip
[123]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_create@multigpu-create-massive-size:
- shard-bmg: NOTRUN -> [SKIP][125] ([Intel XE#2504] / [Intel XE#7319] / [Intel XE#7350])
[125]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@xe_eudebug@basic-connect:
- shard-lnl: NOTRUN -> [SKIP][126] ([Intel XE#7636]) +13 other tests skip
[126]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_eudebug@vm-bind-clear:
- shard-bmg: NOTRUN -> [SKIP][127] ([Intel XE#7636]) +21 other tests skip
[127]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@xe_eudebug_sriov@deny-eudebug:
- shard-lnl: NOTRUN -> [SKIP][128] ([Intel XE#4518] / [Intel XE#7404])
[128]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][129] ([Intel XE#5793] / [Intel XE#7320] / [Intel XE#7464])
[129]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@xe_evict@evict-beng-cm-threads-small:
- shard-lnl: NOTRUN -> [SKIP][130] ([Intel XE#6540] / [Intel XE#688]) +12 other tests skip
[130]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@xe_evict@evict-small-multi-queue-priority:
- shard-bmg: NOTRUN -> [SKIP][131] ([Intel XE#7140]) +1 other test skip
[131]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@xe_exec_balancer@many-cm-parallel-userptr-invalidate:
- shard-lnl: NOTRUN -> [SKIP][132] ([Intel XE#7482]) +19 other tests skip
[132]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-3/igt@[email protected]

* igt@xe_exec_basic@multigpu-once-null-rebind:
- shard-bmg: NOTRUN -> [SKIP][133] ([Intel XE#2322] / [Intel XE#7372]) +13 other tests skip
[133]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@xe_exec_basic@multigpu-once-userptr-invalidate:
- shard-lnl: NOTRUN -> [SKIP][134] ([Intel XE#1392]) +8 other tests skip
[134]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@xe_exec_fault_mode@many-execqueues-multi-queue-userptr-invalidate-imm:
- shard-bmg: NOTRUN -> [SKIP][135] ([Intel XE#7136]) +21 other tests skip
[135]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@xe_exec_fault_mode@many-execqueues-multi-queue-userptr-invalidate-imm.html

* igt@xe_exec_fault_mode@twice-multi-queue-userptr-imm:
- shard-lnl: NOTRUN -> [SKIP][136] ([Intel XE#7136]) +12 other tests skip
[136]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_exec_multi_queue@many-execs-preempt-mode-fault-userptr-invalidate:
- shard-bmg: NOTRUN -> [SKIP][137] ([Intel XE#6874]) +45 other tests skip
[137]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@xe_exec_multi_queue@many-execs-preempt-mode-fault-userptr-invalidate.html

* igt@xe_exec_multi_queue@one-queue-basic:
- shard-lnl: NOTRUN -> [SKIP][138] ([Intel XE#6874]) +34 other tests skip
[138]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_exec_reset@cm-multi-queue-gt-reset:
- shard-lnl: NOTRUN -> [SKIP][139] ([Intel XE#7866]) +1 other test skip
[139]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_exec_reset@multi-queue-gt-reset:
- shard-bmg: NOTRUN -> [SKIP][140] ([Intel XE#7866]) +3 other tests skip
[140]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@[email protected]

* igt@xe_exec_system_allocator@pat-index-madvise-pat-idx-wt-single-vma:
- shard-lnl: NOTRUN -> [SKIP][141] ([Intel XE#6196])
[141]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@xe_exec_system_allocator@pat-index-madvise-pat-idx-wt-single-vma.html

* igt@xe_exec_system_allocator@process-many-large-mmap-nomemset:
- shard-bmg: [PASS][142] -> [SKIP][143] ([Intel XE#6703]) +134 other tests skip
[142]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_exec_threads@threads-multi-queue-mixed-fd-userptr-invalidate:
- shard-lnl: NOTRUN -> [SKIP][144] ([Intel XE#7138]) +7 other tests skip
[144]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@xe_exec_threads@threads-multi-queue-mixed-fd-userptr-invalidate.html

* igt@xe_exec_threads@threads-multi-queue-mixed-userptr-invalidate-race:
- shard-bmg: NOTRUN -> [SKIP][145] ([Intel XE#7138]) +11 other tests skip
[145]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@xe_exec_threads@threads-multi-queue-mixed-userptr-invalidate-race.html

* igt@xe_live_ktest@xe_bo@xe_ccs_migrate_kunit:
- shard-bmg: NOTRUN -> [SKIP][146] ([Intel XE#2229])
[146]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-1/igt@xe_live_ktest@xe_bo@xe_ccs_migrate_kunit.html

* igt@xe_live_ktest@xe_eudebug:
- shard-bmg: NOTRUN -> [SKIP][147] ([Intel XE#2833])
[147]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@xe_live_ktest@xe_eudebug.html

* igt@xe_media_fill@media-fill:
- shard-lnl: NOTRUN -> [SKIP][148] ([Intel XE#560] / [Intel XE#7321] / [Intel XE#7453])
[148]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_mmap@pci-membarrier:
- shard-lnl: NOTRUN -> [SKIP][149] ([Intel XE#5100] / [Intel XE#7322] / [Intel XE#7408]) +1 other test skip
[149]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_multigpu_svm@mgpu-concurrent-access-prefetch:
- shard-bmg: NOTRUN -> [SKIP][150] ([Intel XE#6964]) +6 other tests skip
[150]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@xe_multigpu_svm@mgpu-latency-copy-basic:
- shard-lnl: NOTRUN -> [SKIP][151] ([Intel XE#6964]) +1 other test skip
[151]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_noexec_ping_pong@basic:
- shard-lnl: NOTRUN -> [SKIP][152] ([Intel XE#6259] / [Intel XE#7324] / [Intel XE#7406])
[152]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@xe_page_reclaim@pde-vs-pd:
- shard-lnl: NOTRUN -> [SKIP][153] ([Intel XE#7793]) +2 other tests skip
[153]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][154] ([Intel XE#7793]) +1 other test skip
[154]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@xe_pat@pat-index-xelp:
- shard-bmg: NOTRUN -> [SKIP][155] ([Intel XE#2245] / [Intel XE#7590])
[155]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_pat@pat-sw-hw-reset-compare:
- shard-bmg: NOTRUN -> [FAIL][156] ([Intel XE#7695]) +2 other tests fail
[156]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@xe_pat@xa-app-transient-media-off:
- shard-lnl: NOTRUN -> [SKIP][157] ([Intel XE#7590] / [Intel XE#7772])
[157]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_peer2peer@read:
- shard-lnl: NOTRUN -> [SKIP][158] ([Intel XE#1061] / [Intel XE#7326] / [Intel XE#7353])
[158]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]
- shard-bmg: NOTRUN -> [SKIP][159] ([Intel XE#2427] / [Intel XE#6953] / [Intel XE#7326] / [Intel XE#7353])
[159]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-10/igt@[email protected]

* igt@xe_pm@d3cold-multiple-execs:
- shard-bmg: NOTRUN -> [SKIP][160] ([Intel XE#2284] / [Intel XE#7370]) +1 other test skip
[160]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]
- shard-lnl: NOTRUN -> [SKIP][161] ([Intel XE#2284] / [Intel XE#366] / [Intel XE#7370])
[161]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_pm@d3hot-i2c:
- shard-bmg: NOTRUN -> [SKIP][162] ([Intel XE#5742] / [Intel XE#7328] / [Intel XE#7400])
[162]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_pm@s3-exec-after:
- shard-lnl: NOTRUN -> [SKIP][163] ([Intel XE#584] / [Intel XE#7369]) +1 other test skip
[163]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

* igt@xe_pmu@fn-engine-activity-sched-if-idle:
- shard-lnl: NOTRUN -> [SKIP][164] ([Intel XE#4650] / [Intel XE#7347])
[164]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-3/igt@[email protected]

* igt@xe_prefetch_fault@prefetch-fault-svm:
- shard-bmg: NOTRUN -> [SKIP][165] ([Intel XE#7599])
[165]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_pxp@pxp-termination-key-update-post-suspend:
- shard-bmg: NOTRUN -> [SKIP][166] ([Intel XE#4733] / [Intel XE#7417]) +5 other tests skip
[166]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

* igt@xe_query@multigpu-query-invalid-cs-cycles:
- shard-bmg: NOTRUN -> [SKIP][167] ([Intel XE#944]) +3 other tests skip
[167]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-9/igt@[email protected]

* igt@xe_query@multigpu-query-mem-usage:
- shard-lnl: NOTRUN -> [SKIP][168] ([Intel XE#944])
[168]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_sriov_admin@exec-quantum-write-readback-vfs-disabled:
- shard-lnl: NOTRUN -> [SKIP][169] ([Intel XE#7174])
[169]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-7/igt@[email protected]

* igt@xe_sriov_auto_provisioning@fair-allocation:
- shard-lnl: NOTRUN -> [SKIP][170] ([Intel XE#4130] / [Intel XE#7366]) +1 other test skip
[170]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-1/igt@[email protected]

* igt@xe_sriov_vram@vf-access-beyond:
- shard-lnl: NOTRUN -> [SKIP][171] ([Intel XE#6376] / [Intel XE#7330] / [Intel XE#7422])
[171]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-2/igt@[email protected]

#### Possible fixes ####

* igt@kms_flip@2x-flip-vs-expired-vblank@ab-dp2-hdmi-a3:
- shard-bmg: [FAIL][172] ([Intel XE#3321]) -> [PASS][173]
[172]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_flip@[email protected]
[173]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-4/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-expired-vblank-interruptible@b-edp1:
- shard-lnl: [FAIL][174] ([Intel XE#301]) -> [PASS][175] +1 other test pass
[174]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-lnl-5/igt@kms_flip@[email protected]
[175]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-5/igt@kms_flip@[email protected]

* igt@kms_hdr@invalid-hdr:
- shard-bmg: [SKIP][176] ([Intel XE#1503]) -> [PASS][177]
[176]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-6/igt@[email protected]
[177]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-8/igt@[email protected]

* igt@kms_hdr@invalid-hdr@pipe-a-hdmi-a-3-xrgb16161616f:
- shard-bmg: [SKIP][178] ([Intel XE#7922]) -> [PASS][179] +1 other test pass
[178]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-6/igt@kms_hdr@[email protected]
[179]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-8/igt@kms_hdr@[email protected]

* igt@kms_pipe_crc_basic@nonblocking-crc:
- shard-bmg: [DMESG-FAIL][180] ([Intel XE#5545] / [Intel XE#7774]) -> [PASS][181] +1 other test pass
[180]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[181]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_plane_multiple@2x-tiling-none:
- shard-bmg: [ABORT][182] -> [PASS][183]
[182]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[183]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@[email protected]

* igt@kms_plane_multiple@2x-tiling-none@pipe-c-dp-2-pipe-a-hdmi-a-3:
- shard-bmg: [DMESG-FAIL][184] -> [PASS][185]
[184]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@kms_plane_multiple@[email protected]
[185]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@kms_plane_multiple@[email protected]

* igt@kms_plane_multiple@2x-tiling-none@pipe-c-dp-2-pipe-b-hdmi-a-3:
- shard-bmg: [ABORT][186] ([Intel XE#5545] / [Intel XE#6652] / [Intel XE#7814]) -> [PASS][187]
[186]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@kms_plane_multiple@[email protected]
[187]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-3/igt@kms_plane_multiple@[email protected]

* igt@kms_psr@psr2-suspend:
- shard-lnl: [ABORT][188] ([Intel XE#2625]) -> [PASS][189] +4 other tests pass
[188]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-lnl-4/igt@[email protected]
[189]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-lnl-6/igt@[email protected]

* igt@xe_exec_system_allocator@process-many-large-execqueues-new-nomemset:
- shard-bmg: [SKIP][190] ([Intel XE#6703]) -> [PASS][191] +24 other tests pass
[190]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@xe_exec_system_allocator@process-many-large-execqueues-new-nomemset.html
[191]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@xe_exec_system_allocator@process-many-large-execqueues-new-nomemset.html

* igt@xe_pm@s3-exec-after:
- shard-bmg: [ABORT][192] ([Intel XE#1794]) -> [PASS][193]
[192]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-4/igt@[email protected]
[193]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-6/igt@[email protected]

#### Warnings ####

* igt@kms_big_fb@x-tiled-64bpp-rotate-270:
- shard-bmg: [SKIP][194] ([Intel XE#2327]) -> [SKIP][195] ([Intel XE#6703])
[194]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[195]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_big_fb@y-tiled-max-hw-stride-64bpp-rotate-180-hflip:
- shard-bmg: [SKIP][196] ([Intel XE#6703]) -> [SKIP][197] ([Intel XE#1124])
[196]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[197]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_big_fb@yf-tiled-16bpp-rotate-0:
- shard-bmg: [SKIP][198] ([Intel XE#1124]) -> [SKIP][199] ([Intel XE#6703]) +2 other tests skip
[198]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[199]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_bw@connected-linear-tiling-4-displays-target-2160x1440p:
- shard-bmg: [SKIP][200] ([Intel XE#7679]) -> [SKIP][201] ([Intel XE#6703])
[200]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[201]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_bw@linear-tiling-4-displays-target-3840x2160p:
- shard-bmg: [SKIP][202] ([Intel XE#367]) -> [SKIP][203] ([Intel XE#6703])
[202]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[203]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_ccs@ccs-on-another-bo-y-tiled-gen12-rc-ccs-cc:
- shard-bmg: [SKIP][204] ([Intel XE#6703]) -> [SKIP][205] ([Intel XE#2887])
[204]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[205]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_ccs@random-ccs-data-y-tiled-gen12-rc-ccs:
- shard-bmg: [SKIP][206] ([Intel XE#2887]) -> [SKIP][207] ([Intel XE#6703]) +2 other tests skip
[206]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[207]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_chamelium_hpd@dp-hpd-with-enabled-mode:
- shard-bmg: [SKIP][208] ([Intel XE#2252]) -> [SKIP][209] ([Intel XE#6703]) +1 other test skip
[208]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[209]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_chamelium_hpd@hdmi-hpd-storm-disable:
- shard-bmg: [SKIP][210] ([Intel XE#6703]) -> [SKIP][211] ([Intel XE#2252])
[210]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[211]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_content_protection@dp-mst-type-0-hdcp14:
- shard-bmg: [SKIP][212] ([Intel XE#6703]) -> [SKIP][213] ([Intel XE#6974])
[212]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[213]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_content_protection@dp-mst-type-1-suspend-resume:
- shard-bmg: [SKIP][214] ([Intel XE#6974]) -> [SKIP][215] ([Intel XE#6703])
[214]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[215]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_cursor_legacy@flip-vs-cursor-legacy:
- shard-bmg: [SKIP][216] ([Intel XE#6703]) -> [FAIL][217] ([Intel XE#7571])
[216]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[217]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-upscaling:
- shard-bmg: [SKIP][218] ([Intel XE#7178] / [Intel XE#7351]) -> [SKIP][219] ([Intel XE#6703]) +1 other test skip
[218]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-upscaling.html
[219]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-upscaling.html

* igt@kms_frontbuffer_tracking@drrs-2p-scndscrn-shrfb-plflip-blt:
- shard-bmg: [SKIP][220] ([Intel XE#6703]) -> [SKIP][221] ([Intel XE#2311]) +1 other test skip
[220]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[221]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_frontbuffer_tracking@drrs-2p-scndscrn-spr-indfb-draw-blt:
- shard-bmg: [SKIP][222] ([Intel XE#2311]) -> [SKIP][223] ([Intel XE#6703]) +12 other tests skip
[222]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_frontbuffer_tracking@drrs-2p-scndscrn-spr-indfb-draw-blt.html
[223]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@kms_frontbuffer_tracking@drrs-2p-scndscrn-spr-indfb-draw-blt.html

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-pgflip-blt:
- shard-bmg: [SKIP][224] ([Intel XE#4141]) -> [SKIP][225] ([Intel XE#6703]) +2 other tests skip
[224]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[225]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-wc:
- shard-bmg: [SKIP][226] ([Intel XE#6703]) -> [SKIP][227] ([Intel XE#2313]) +2 other tests skip
[226]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-wc.html
[227]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-pri-indfb-draw-mmap-wc:
- shard-bmg: [SKIP][228] ([Intel XE#2313]) -> [SKIP][229] ([Intel XE#6703]) +12 other tests skip
[228]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-pri-indfb-draw-mmap-wc.html
[229]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-pri-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@psr-argb161616f-draw-mmap-wc:
- shard-bmg: [SKIP][230] ([Intel XE#6703]) -> [SKIP][231] ([Intel XE#7061] / [Intel XE#7356])
[230]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[231]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_frontbuffer_tracking@psrhdr-abgr161616f-draw-blt:
- shard-bmg: [SKIP][232] ([Intel XE#7061]) -> [SKIP][233] ([Intel XE#6703])
[232]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[233]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_plane@pixel-format-4-tiled-lnl-ccs-modifier-source-clamping:
- shard-bmg: [SKIP][234] ([Intel XE#7283]) -> [SKIP][235] ([Intel XE#6703])
[234]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@kms_plane@pixel-format-4-tiled-lnl-ccs-modifier-source-clamping.html
[235]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@kms_plane@pixel-format-4-tiled-lnl-ccs-modifier-source-clamping.html

* igt@kms_plane_scaling@planes-downscale-factor-0-75:
- shard-bmg: [SKIP][236] ([Intel XE#2763] / [Intel XE#6886]) -> [SKIP][237] ([Intel XE#6703])
[236]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[237]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_pm_dc@dc5-retention-flops:
- shard-bmg: [SKIP][238] ([Intel XE#3309] / [Intel XE#7368]) -> [SKIP][239] ([Intel XE#6703])
[238]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[239]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_pm_rpm@modeset-lpsp:
- shard-bmg: [SKIP][240] ([Intel XE#1439] / [Intel XE#3141] / [Intel XE#7383] / [Intel XE#836]) -> [SKIP][241] ([Intel XE#6703])
[240]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[241]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_psr2_sf@fbc-pr-cursor-plane-update-sf:
- shard-bmg: [SKIP][242] ([Intel XE#1489]) -> [SKIP][243] ([Intel XE#6703])
[242]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[243]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-overlay-plane-move-continuous-sf:
- shard-bmg: [SKIP][244] ([Intel XE#6703]) -> [SKIP][245] ([Intel XE#1489]) +1 other test skip
[244]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[245]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_psr2_su@frontbuffer-xrgb8888:
- shard-bmg: [SKIP][246] ([Intel XE#2387] / [Intel XE#7429]) -> [SKIP][247] ([Intel XE#6703])
[246]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[247]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_psr@pr-dpms:
- shard-bmg: [SKIP][248] ([Intel XE#2234] / [Intel XE#2850]) -> [SKIP][249] ([Intel XE#6703]) +1 other test skip
[248]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[249]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_rotation_crc@primary-y-tiled-reflect-x-270:
- shard-bmg: [SKIP][250] ([Intel XE#3904] / [Intel XE#7342]) -> [SKIP][251] ([Intel XE#6703])
[250]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[251]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_sharpness_filter@invalid-filter-with-nearest-neighbor:
- shard-bmg: [SKIP][252] ([Intel XE#6703]) -> [SKIP][253] ([Intel XE#6503])
[252]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[253]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern:
- shard-bmg: [SKIP][254] ([Intel XE#2426] / [Intel XE#5848]) -> [FAIL][255] ([Intel XE#1729] / [Intel XE#7424])
[254]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-1/igt@[email protected]
[255]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@kms_vrr@flip-basic-fastset:
- shard-bmg: [SKIP][256] ([Intel XE#6703]) -> [SKIP][257] ([Intel XE#1499])
[256]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[257]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_eudebug_online@writes-caching-sram-bb-sram-target-sram:
- shard-bmg: [SKIP][258] ([Intel XE#6703]) -> [SKIP][259] ([Intel XE#7636])
[258]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[259]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_eudebug_sriov@deny-sriov:
- shard-bmg: [SKIP][260] ([Intel XE#5793] / [Intel XE#7320] / [Intel XE#7464]) -> [SKIP][261] ([Intel XE#6703])
[260]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[261]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_evict@evict-small-multi-queue:
- shard-bmg: [SKIP][262] ([Intel XE#7140]) -> [SKIP][263] ([Intel XE#6703])
[262]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[263]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_exec_basic@multigpu-many-execqueues-many-vm-userptr-invalidate-race:
- shard-bmg: [SKIP][264] ([Intel XE#2322] / [Intel XE#7372]) -> [SKIP][265] ([Intel XE#6703])
[264]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@xe_exec_basic@multigpu-many-execqueues-many-vm-userptr-invalidate-race.html
[265]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@xe_exec_basic@multigpu-many-execqueues-many-vm-userptr-invalidate-race.html

* igt@xe_exec_basic@multigpu-once-bindexecqueue-userptr-rebind:
- shard-bmg: [SKIP][266] ([Intel XE#6703]) -> [SKIP][267] ([Intel XE#2322] / [Intel XE#7372])
[266]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[267]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_exec_fault_mode@many-execqueues-multi-queue-invalid-userptr-fault:
- shard-bmg: [SKIP][268] ([Intel XE#6703]) -> [SKIP][269] ([Intel XE#7136])
[268]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@xe_exec_fault_mode@many-execqueues-multi-queue-invalid-userptr-fault.html
[269]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@xe_exec_fault_mode@many-execqueues-multi-queue-invalid-userptr-fault.html

* igt@xe_exec_fault_mode@twice-multi-queue-userptr:
- shard-bmg: [SKIP][270] ([Intel XE#7136]) -> [SKIP][271] ([Intel XE#6703])
[270]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[271]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_exec_multi_queue@many-queues-dyn-priority-smem:
- shard-bmg: [SKIP][272] ([Intel XE#6703]) -> [SKIP][273] ([Intel XE#6874]) +2 other tests skip
[272]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[273]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_exec_multi_queue@many-queues-priority-smem:
- shard-bmg: [SKIP][274] ([Intel XE#6874]) -> [SKIP][275] ([Intel XE#6703]) +5 other tests skip
[274]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[275]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_exec_sip_eudebug@breakpoint-writesip-nodebug:
- shard-bmg: [SKIP][276] ([Intel XE#7636]) -> [SKIP][277] ([Intel XE#6703]) +2 other tests skip
[276]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[277]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_exec_threads@threads-multi-queue-cm-fd-basic:
- shard-bmg: [SKIP][278] ([Intel XE#6703]) -> [SKIP][279] ([Intel XE#7138])
[278]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[279]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_exec_threads@threads-multi-queue-cm-userptr-invalidate-race:
- shard-bmg: [SKIP][280] ([Intel XE#7138]) -> [SKIP][281] ([Intel XE#6703]) +1 other test skip
[280]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@xe_exec_threads@threads-multi-queue-cm-userptr-invalidate-race.html
[281]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@xe_exec_threads@threads-multi-queue-cm-userptr-invalidate-race.html

* igt@xe_fault_injection@exec-queue-create-fail-xe_pxp_exec_queue_add:
- shard-bmg: [SKIP][282] ([Intel XE#6703]) -> [SKIP][283] ([Intel XE#6281] / [Intel XE#7426])
[282]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@xe_fault_injection@exec-queue-create-fail-xe_pxp_exec_queue_add.html
[283]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@xe_fault_injection@exec-queue-create-fail-xe_pxp_exec_queue_add.html

* igt@xe_page_reclaim@boundary-split:
- shard-bmg: [SKIP][284] ([Intel XE#6703]) -> [SKIP][285] ([Intel XE#7793])
[284]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[285]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_pm@d3cold-mmap-vram:
- shard-bmg: [SKIP][286] ([Intel XE#2284] / [Intel XE#7370]) -> [SKIP][287] ([Intel XE#6703])
[286]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[287]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_pxp@pxp-optout:
- shard-bmg: [SKIP][288] ([Intel XE#4733] / [Intel XE#7417]) -> [SKIP][289] ([Intel XE#6703])
[288]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[289]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

* igt@xe_pxp@pxp-stale-bo-exec-post-suspend:
- shard-bmg: [SKIP][290] ([Intel XE#6703]) -> [SKIP][291] ([Intel XE#4733] / [Intel XE#7417])
[290]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-2/igt@[email protected]
[291]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-5/igt@[email protected]

* igt@xe_query@multigpu-query-pxp-status:
- shard-bmg: [SKIP][292] ([Intel XE#944]) -> [SKIP][293] ([Intel XE#6703])
[292]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb/shard-bmg-5/igt@[email protected]
[293]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/shard-bmg-2/igt@[email protected]

[Intel XE#1061]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1061
[Intel XE#1124]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1124
[Intel XE#1178]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1178
[Intel XE#1392]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1392
[Intel XE#1397]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1397
[Intel XE#1406]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1406
[Intel XE#1407]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1407
[Intel XE#1421]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1421
[Intel XE#1424]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1424
[Intel XE#1428]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1428
[Intel XE#1435]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1435
[Intel XE#1439]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1439
[Intel XE#1468]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1468
[Intel XE#1489]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1489
[Intel XE#1499]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1499
[Intel XE#1503]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1503
[Intel XE#1729]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1729
[Intel XE#1745]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1745
[Intel XE#1794]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1794
[Intel XE#2142]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2142
[Intel XE#2229]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2229
[Intel XE#2233]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2233
[Intel XE#2234]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2234
[Intel XE#2244]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2244
[Intel XE#2245]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2245
[Intel XE#2252]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2252
[Intel XE#2284]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2284
[Intel XE#2311]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2311
[Intel XE#2313]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2313
[Intel XE#2320]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2320
[Intel XE#2321]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2321
[Intel XE#2322]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2322
[Intel XE#2325]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2325
[Intel XE#2327]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2327
[Intel XE#2328]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2328
[Intel XE#2330]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2330
[Intel XE#2373]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2373
[Intel XE#2374]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2374
[Intel XE#2375]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2375
[Intel XE#2387]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2387
[Intel XE#2413]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2413
[Intel XE#2426]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2426
[Intel XE#2427]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2427
[Intel XE#2450]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2450
[Intel XE#2499]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2499
[Intel XE#2504]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2504
[Intel XE#2625]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2625
[Intel XE#2652]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2652
[Intel XE#2763]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2763
[Intel XE#2833]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2833
[Intel XE#2850]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2850
[Intel XE#2887]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2887
[Intel XE#2893]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2893
[Intel XE#2938]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2938
[Intel XE#301]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/301
[Intel XE#306]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/306
[Intel XE#309]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/309
[Intel XE#3141]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3141
[Intel XE#3304]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3304
[Intel XE#3309]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3309
[Intel XE#3321]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3321
[Intel XE#3432]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3432
[Intel XE#3544]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3544
[Intel XE#3658]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3658
[Intel XE#366]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/366
[Intel XE#367]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/367
[Intel XE#373]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/373
[Intel XE#3904]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3904
[Intel XE#4130]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4130
[Intel XE#4141]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4141
[Intel XE#4156]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4156
[Intel XE#4294]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4294
[Intel XE#4354]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4354
[Intel XE#4422]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4422
[Intel XE#4518]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4518
[Intel XE#4596]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4596
[Intel XE#4608]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4608
[Intel XE#4609]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4609
[Intel XE#4650]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4650
[Intel XE#4733]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4733
[Intel XE#5020]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5020
[Intel XE#5021]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5021
[Intel XE#5100]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5100
[Intel XE#5545]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5545
[Intel XE#560]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/560
[Intel XE#5742]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5742
[Intel XE#5793]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5793
[Intel XE#5813]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5813
[Intel XE#584]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/584
[Intel XE#5848]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5848
[Intel XE#5854]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5854
[Intel XE#5857]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5857
[Intel XE#5882]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5882
[Intel XE#6010]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6010
[Intel XE#607]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/607
[Intel XE#6126]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6126
[Intel XE#6127]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6127
[Intel XE#6196]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6196
[Intel XE#6259]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6259
[Intel XE#6281]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6281
[Intel XE#6312]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6312
[Intel XE#6376]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6376
[Intel XE#6503]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6503
[Intel XE#651]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/651
[Intel XE#6540]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6540
[Intel XE#6557]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6557
[Intel XE#656]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/656
[Intel XE#6599]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6599
[Intel XE#6652]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6652
[Intel XE#6703]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6703
[Intel XE#6874]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6874
[Intel XE#688]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/688
[Intel XE#6886]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6886
[Intel XE#6901]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6901
[Intel XE#6911]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6911
[Intel XE#6953]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6953
[Intel XE#6964]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6964
[Intel XE#6974]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6974
[Intel XE#701]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/701
[Intel XE#7061]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7061
[Intel XE#7086]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7086
[Intel XE#7130]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7130
[Intel XE#7136]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7136
[Intel XE#7138]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7138
[Intel XE#7140]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7140
[Intel XE#7174]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7174
[Intel XE#7178]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7178
[Intel XE#7179]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7179
[Intel XE#7283]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7283
[Intel XE#7304]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7304
[Intel XE#7317]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7317
[Intel XE#7319]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7319
[Intel XE#7320]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7320
[Intel XE#7321]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7321
[Intel XE#7322]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7322
[Intel XE#7324]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7324
[Intel XE#7326]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7326
[Intel XE#7328]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7328
[Intel XE#7330]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7330
[Intel XE#7342]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7342
[Intel XE#7343]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7343
[Intel XE#7345]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7345
[Intel XE#7347]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7347
[Intel XE#7348]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7348
[Intel XE#7349]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7349
[Intel XE#7350]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7350
[Intel XE#7351]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7351
[Intel XE#7353]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7353
[Intel XE#7355]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7355
[Intel XE#7356]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7356
[Intel XE#7358]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7358
[Intel XE#7359]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7359
[Intel XE#7360]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7360
[Intel XE#7361]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7361
[Intel XE#7366]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7366
[Intel XE#7367]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7367
[Intel XE#7368]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7368
[Intel XE#7369]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7369
[Intel XE#7370]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7370
[Intel XE#7372]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7372
[Intel XE#7374]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7374
[Intel XE#7376]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7376
[Intel XE#7377]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7377
[Intel XE#7378]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7378
[Intel XE#7383]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7383
[Intel XE#7385]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7385
[Intel XE#7386]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7386
[Intel XE#7387]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7387
[Intel XE#7390]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7390
[Intel XE#7396]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7396
[Intel XE#7399]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7399
[Intel XE#7400]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7400
[Intel XE#7404]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7404
[Intel XE#7406]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7406
[Intel XE#7408]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7408
[Intel XE#7417]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7417
[Intel XE#7422]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7422
[Intel XE#7424]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7424
[Intel XE#7425]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7425
[Intel XE#7426]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7426
[Intel XE#7429]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7429
[Intel XE#7442]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7442
[Intel XE#7448]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7448
[Intel XE#7453]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7453
[Intel XE#7455]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7455
[Intel XE#7464]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7464
[Intel XE#7477]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7477
[Intel XE#7482]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7482
[Intel XE#7571]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7571
[Intel XE#7590]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7590
[Intel XE#7599]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7599
[Intel XE#7636]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7636
[Intel XE#7642]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7642
[Intel XE#7644]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7644
[Intel XE#7676]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7676
[Intel XE#7679]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7679
[Intel XE#7695]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7695
[Intel XE#776]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/776
[Intel XE#7760]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7760
[Intel XE#7772]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7772
[Intel XE#7774]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7774
[Intel XE#7793]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7793
[Intel XE#7794]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7794
[Intel XE#7814]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7814
[Intel XE#7865]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7865
[Intel XE#7866]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7866
[Intel XE#7905]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7905
[Intel XE#7915]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7915
[Intel XE#7922]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7922
[Intel XE#7950]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7950
[Intel XE#8007]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8007
[Intel XE#8076]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8076
[Intel XE#836]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/836
[Intel XE#870]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/870
[Intel XE#944]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/944

Build changes
-------------

* Linux: xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb -> xe-pw-167391v1

IGT_8939: 8939
xe-5138-11a8456527f00d86dc8b23035c324da194fbbadb: 11a8456527f00d86dc8b23035c324da194fbbadb
xe-pw-167391v1: 167391v1

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-167391v1/index.html

#5 lore raw
In reply to Rodrigo Vivi
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

Quoted 7 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

Quoted 4 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

Quoted 7 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

Quoted 19 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

Quoted 204 lines
drivers/gpu/drm/xe/xe_ggtt.c +90 -22
 	/** @access_count: counts GGTT writes */
 	unsigned int access_count;
 	/** @wq: Dedicated unordered work queue to process node removals */
@@ -318,6 +329,10 @@ static void ggtt_fini_early(struct drm_device *drm, void *arg)
 {
 	struct xe_ggtt *ggtt = arg;
 
+	if (drm_mm_node_allocated(&ggtt->reserved_top))
+		drm_mm_remove_node(&ggtt->reserved_top);
+	if (drm_mm_node_allocated(&ggtt->reserved_bottom))
+		drm_mm_remove_node(&ggtt->reserved_bottom);
 	destroy_workqueue(ggtt->wq);
 	drm_mm_takedown(&ggtt->mm);
 }
@@ -354,16 +369,66 @@ static const struct xe_ggtt_pt_ops xelpg_pt_wa_ops = {
 	.ggtt_get_pte = xe_ggtt_get_pte,
 };
 
-static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size)
+/*
+ * __xe_ggtt_init_early - Generic drm_mm initialisation for both PF and VF.
+ *
+ * @start and @size define the usable GGTT range exposed through the public API.
+ * @mm_offset is added to every drm_mm node address to obtain the hardware
+ * address (0 for PF where the drm_mm spans real addresses; @start for VF).
+ * @mm_size is the total span passed to drm_mm_init() (equals @size for VF;
+ * equals the full hardware GGTT size for PF).
+ */
+static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size,
+				 u64 mm_offset, u64 mm_size)
 {
 	ggtt->start = start;
 	ggtt->size = size;
-	drm_mm_init(&ggtt->mm, 0, size);
+	ggtt->mm_offset = mm_offset;
+	drm_mm_init(&ggtt->mm, 0, mm_size);
+}
+
+/*
+ * __xe_ggtt_reserve_pf_nodes - Permanently reserve the forbidden GGTT zones.
+ *
+ * Must be called after __xe_ggtt_init_early() for the PF case.  Reserves
+ * [0, @wopcm) and [@guc_top, @total_size) so the allocator never hands them
+ * out.  On failure the drm_mm is torn down and the error is returned.
+ */
+static int __xe_ggtt_reserve_pf_nodes(struct xe_ggtt *ggtt, u64 wopcm,
+				      u64 guc_top, u64 total_size)
+{
+	int err;
+
+	/* Reserve [0, wopcm) — GuC cannot access below WOPCM */
+	if (wopcm > 0) {
+		ggtt->reserved_bottom.start = 0;
+		ggtt->reserved_bottom.size = wopcm;
+		err = drm_mm_reserve_node(&ggtt->mm, &ggtt->reserved_bottom);
+		if (WARN_ON(err))
+			goto err_takedown;
+	}
+
+	/* Reserve [guc_top, total_size) — GuC cannot access above GUC_GGTT_TOP */
+	if (guc_top < total_size) {
+		ggtt->reserved_top.start = guc_top;
+		ggtt->reserved_top.size = total_size - guc_top;
+		err = drm_mm_reserve_node(&ggtt->mm, &ggtt->reserved_top);
+		if (WARN_ON(err))
+			goto err_remove_bottom;
+	}
+
+	return 0;
+
+err_remove_bottom:
+	drm_mm_remove_node(&ggtt->reserved_bottom);
+err_takedown:
+	drm_mm_takedown(&ggtt->mm);
+	return err;
 }
 
 int xe_ggtt_init_kunit(struct xe_ggtt *ggtt, u32 start, u32 size)
 {
-	__xe_ggtt_init_early(ggtt, start, size);
+	__xe_ggtt_init_early(ggtt, start, size, start, size);
 	return 0;
 }
 EXPORT_SYMBOL_IF_KUNIT(xe_ggtt_init_kunit);
@@ -405,8 +470,13 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 			xe_tile_err(ggtt->tile, "Hardware reported no preallocated GSM\n");
 			return -ENOMEM;
 		}
+		/*
+		 * For PF, ggtt_size holds the full hardware GGTT size. The
+		 * WOPCM and GUC_GGTT_TOP limits are enforced via permanently
+		 * reserved drm_mm nodes rather than by capping the range.
+		 */
 		ggtt_start = wopcm;
-		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE - ggtt_start;
+		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE;
 	} else {
 		ggtt_start = xe_tile_sriov_vf_ggtt_base(ggtt->tile);
 		ggtt_size = xe_tile_sriov_vf_ggtt(ggtt->tile);
@@ -423,9 +493,6 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 	if (IS_DGFX(xe) && xe->info.vram_flags & XE_VRAM_FLAGS_NEED64K)
 		ggtt->flags |= XE_GGTT_FLAGS_64K;
 
-	if (ggtt_size + ggtt_start > GUC_GGTT_TOP)
-		ggtt_size = GUC_GGTT_TOP - ggtt_start;
-
 	if (GRAPHICS_VERx100(xe) >= 1270)
 		ggtt->pt_ops =
 			(ggtt->tile->media_gt && XE_GT_WA(ggtt->tile->media_gt, 22019338487)) ||
@@ -438,7 +505,19 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 	if (!ggtt->wq)
 		return -ENOMEM;
 
-	__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size);
+	if (!IS_SRIOV_VF(xe)) {
+		__xe_ggtt_init_early(ggtt, ggtt_start, GUC_GGTT_TOP - ggtt_start,
+				     0, ggtt_size);
+		err = __xe_ggtt_reserve_pf_nodes(ggtt, ggtt_start, GUC_GGTT_TOP,
+						 ggtt_size);
+		if (err) {
+			destroy_workqueue(ggtt->wq);
+			return err;
+		}
+	} else {
+		__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size,
+				     ggtt_start, ggtt_size);
+	}
 
 	err = drmm_add_action_or_reset(&xe->drm, ggtt_fini_early, ggtt);
 	if (err)
@@ -459,7 +538,7 @@ static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
 	/* Display may have allocated inside ggtt, so be careful with clearing here */
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(hole, &ggtt->mm, start, end)
-		xe_ggtt_clear(ggtt, ggtt->start + start, end - start);
+		xe_ggtt_clear(ggtt, ggtt->mm_offset + start, end - start);
 
 	xe_ggtt_invalidate(ggtt);
 	mutex_unlock(&ggtt->lock);
@@ -613,6 +692,7 @@ void xe_ggtt_shift_nodes(struct xe_ggtt *ggtt, u64 new_start)
 
 	/* pairs with READ_ONCE in xe_ggtt_node_addr() */
 	WRITE_ONCE(ggtt->start, new_start);
+	WRITE_ONCE(ggtt->mm_offset, new_start);
 }
 
 static int xe_ggtt_insert_node_locked(struct xe_ggtt_node *node,
@@ -815,20 +895,19 @@ static int __xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
 
 	mutex_lock(&ggtt->lock);
 	/*
-	 * When inheriting the initial framebuffer, the framebuffer is
-	 * physically located at VRAM address 0, and usually at GGTT address 0 too.
-	 *
-	 * The display code will ask for a GGTT allocation between end of BO and
-	 * remainder of GGTT, unaware that the start is reserved by WOPCM.
+	 * Convert caller-supplied hardware GGTT addresses to drm_mm-relative
+	 * coordinates. For PF mm_offset is 0 so this is a no-op; callers pass
+	 * real addresses and the reserved_bottom/top nodes prevent allocations
+	 * in the forbidden regions. For VF, mm_offset equals the VF base so
+	 * we convert to relative drm_mm space.
 	 */
-	if (start >= ggtt->start)
-		start -= ggtt->start;
+	if (start >= ggtt->mm_offset)
+		start -= ggtt->mm_offset;
 	else
 		start = 0;
 
-	/* Should never happen, but since we handle start, fail graciously for end */
-	if (end >= ggtt->start)
-		end -= ggtt->start;
+	if (end >= ggtt->mm_offset)
+		end -= ggtt->mm_offset;
 	else
 		end = 0;
 
@@ -923,7 +1002,7 @@ u64 xe_ggtt_largest_hole(struct xe_ggtt *ggtt, u64 alignment, u64 *spare)
 
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
-		hole_start = max(hole_start, ggtt->start);
+		hole_start = max(hole_start, ggtt->mm_offset);
 		hole_start = ALIGN(hole_start, alignment);
 		hole_end = ALIGN_DOWN(hole_end, alignment);
 		if (hole_start >= hole_end)
@@ -1098,7 +1177,7 @@ u64 xe_ggtt_print_holes(struct xe_ggtt *ggtt, u64 alignment, struct drm_printer
 
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
-		hole_start = max(hole_start, ggtt->start);
+		hole_start = max(hole_start, ggtt->mm_offset);
 		hole_start = ALIGN(hole_start, alignment);
 		hole_end = ALIGN_DOWN(hole_end, alignment);
 		if (hole_start >= hole_end)
@@ -1152,7 +1231,7 @@ u64 xe_ggtt_read_pte(struct xe_ggtt *ggtt, u64 offset)
 u64 xe_ggtt_node_addr(const struct xe_ggtt_node *node)
 {
 	/* pairs with WRITE_ONCE in xe_ggtt_shift_nodes() */
-	return node->base.start + READ_ONCE(node->ggtt->start);
+	return node->base.start + READ_ONCE(node->ggtt->mm_offset);
 }
 
 /**
author maintainer
#6 lore raw
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 35 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

Quoted 8 lines

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Quoted 207 lines
Quoted 206 lines
drivers/gpu/drm/xe/xe_ggtt.c +90 -22
 	/** @access_count: counts GGTT writes */
 	unsigned int access_count;
 	/** @wq: Dedicated unordered work queue to process node removals */
@@ -318,6 +329,10 @@ static void ggtt_fini_early(struct drm_device *drm, void *arg)
 {
 	struct xe_ggtt *ggtt = arg;
 
+	if (drm_mm_node_allocated(&ggtt->reserved_top))
+		drm_mm_remove_node(&ggtt->reserved_top);
+	if (drm_mm_node_allocated(&ggtt->reserved_bottom))
+		drm_mm_remove_node(&ggtt->reserved_bottom);
 	destroy_workqueue(ggtt->wq);
 	drm_mm_takedown(&ggtt->mm);
 }
@@ -354,16 +369,66 @@ static const struct xe_ggtt_pt_ops xelpg_pt_wa_ops = {
 	.ggtt_get_pte = xe_ggtt_get_pte,
 };
 
-static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size)
+/*
+ * __xe_ggtt_init_early - Generic drm_mm initialisation for both PF and VF.
+ *
+ * @start and @size define the usable GGTT range exposed through the public API.
+ * @mm_offset is added to every drm_mm node address to obtain the hardware
+ * address (0 for PF where the drm_mm spans real addresses; @start for VF).
+ * @mm_size is the total span passed to drm_mm_init() (equals @size for VF;
+ * equals the full hardware GGTT size for PF).
+ */
+static void __xe_ggtt_init_early(struct xe_ggtt *ggtt, u64 start, u64 size,
+				 u64 mm_offset, u64 mm_size)
 {
 	ggtt->start = start;
 	ggtt->size = size;
-	drm_mm_init(&ggtt->mm, 0, size);
+	ggtt->mm_offset = mm_offset;
+	drm_mm_init(&ggtt->mm, 0, mm_size);
+}
+
+/*
+ * __xe_ggtt_reserve_pf_nodes - Permanently reserve the forbidden GGTT zones.
+ *
+ * Must be called after __xe_ggtt_init_early() for the PF case.  Reserves
+ * [0, @wopcm) and [@guc_top, @total_size) so the allocator never hands them
+ * out.  On failure the drm_mm is torn down and the error is returned.
+ */
+static int __xe_ggtt_reserve_pf_nodes(struct xe_ggtt *ggtt, u64 wopcm,
+				      u64 guc_top, u64 total_size)
+{
+	int err;
+
+	/* Reserve [0, wopcm) — GuC cannot access below WOPCM */
+	if (wopcm > 0) {
+		ggtt->reserved_bottom.start = 0;
+		ggtt->reserved_bottom.size = wopcm;
+		err = drm_mm_reserve_node(&ggtt->mm, &ggtt->reserved_bottom);
+		if (WARN_ON(err))
+			goto err_takedown;
+	}
+
+	/* Reserve [guc_top, total_size) — GuC cannot access above GUC_GGTT_TOP */
+	if (guc_top < total_size) {
+		ggtt->reserved_top.start = guc_top;
+		ggtt->reserved_top.size = total_size - guc_top;
+		err = drm_mm_reserve_node(&ggtt->mm, &ggtt->reserved_top);
+		if (WARN_ON(err))
+			goto err_remove_bottom;
+	}
+
+	return 0;
+
+err_remove_bottom:
+	drm_mm_remove_node(&ggtt->reserved_bottom);
+err_takedown:
+	drm_mm_takedown(&ggtt->mm);
+	return err;
 }
 
 int xe_ggtt_init_kunit(struct xe_ggtt *ggtt, u32 start, u32 size)
 {
-	__xe_ggtt_init_early(ggtt, start, size);
+	__xe_ggtt_init_early(ggtt, start, size, start, size);
 	return 0;
 }
 EXPORT_SYMBOL_IF_KUNIT(xe_ggtt_init_kunit);
@@ -405,8 +470,13 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 			xe_tile_err(ggtt->tile, "Hardware reported no preallocated GSM\n");
 			return -ENOMEM;
 		}
+		/*
+		 * For PF, ggtt_size holds the full hardware GGTT size. The
+		 * WOPCM and GUC_GGTT_TOP limits are enforced via permanently
+		 * reserved drm_mm nodes rather than by capping the range.
+		 */
 		ggtt_start = wopcm;
-		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE - ggtt_start;
+		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE;
 	} else {
 		ggtt_start = xe_tile_sriov_vf_ggtt_base(ggtt->tile);
 		ggtt_size = xe_tile_sriov_vf_ggtt(ggtt->tile);
@@ -423,9 +493,6 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 	if (IS_DGFX(xe) && xe->info.vram_flags & XE_VRAM_FLAGS_NEED64K)
 		ggtt->flags |= XE_GGTT_FLAGS_64K;
 
-	if (ggtt_size + ggtt_start > GUC_GGTT_TOP)
-		ggtt_size = GUC_GGTT_TOP - ggtt_start;
-
 	if (GRAPHICS_VERx100(xe) >= 1270)
 		ggtt->pt_ops =
 			(ggtt->tile->media_gt && XE_GT_WA(ggtt->tile->media_gt, 22019338487)) ||
@@ -438,7 +505,19 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 	if (!ggtt->wq)
 		return -ENOMEM;
 
-	__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size);
+	if (!IS_SRIOV_VF(xe)) {
+		__xe_ggtt_init_early(ggtt, ggtt_start, GUC_GGTT_TOP - ggtt_start,
+				     0, ggtt_size);
+		err = __xe_ggtt_reserve_pf_nodes(ggtt, ggtt_start, GUC_GGTT_TOP,
+						 ggtt_size);
+		if (err) {
+			destroy_workqueue(ggtt->wq);
+			return err;
+		}
+	} else {
+		__xe_ggtt_init_early(ggtt, ggtt_start, ggtt_size,
+				     ggtt_start, ggtt_size);
+	}
 
 	err = drmm_add_action_or_reset(&xe->drm, ggtt_fini_early, ggtt);
 	if (err)
@@ -459,7 +538,7 @@ static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
 	/* Display may have allocated inside ggtt, so be careful with clearing here */
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(hole, &ggtt->mm, start, end)
-		xe_ggtt_clear(ggtt, ggtt->start + start, end - start);
+		xe_ggtt_clear(ggtt, ggtt->mm_offset + start, end - start);
 
 	xe_ggtt_invalidate(ggtt);
 	mutex_unlock(&ggtt->lock);
@@ -613,6 +692,7 @@ void xe_ggtt_shift_nodes(struct xe_ggtt *ggtt, u64 new_start)
 
 	/* pairs with READ_ONCE in xe_ggtt_node_addr() */
 	WRITE_ONCE(ggtt->start, new_start);
+	WRITE_ONCE(ggtt->mm_offset, new_start);
 }
 
 static int xe_ggtt_insert_node_locked(struct xe_ggtt_node *node,
@@ -815,20 +895,19 @@ static int __xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
 
 	mutex_lock(&ggtt->lock);
 	/*
-	 * When inheriting the initial framebuffer, the framebuffer is
-	 * physically located at VRAM address 0, and usually at GGTT address 0 too.
-	 *
-	 * The display code will ask for a GGTT allocation between end of BO and
-	 * remainder of GGTT, unaware that the start is reserved by WOPCM.
+	 * Convert caller-supplied hardware GGTT addresses to drm_mm-relative
+	 * coordinates. For PF mm_offset is 0 so this is a no-op; callers pass
+	 * real addresses and the reserved_bottom/top nodes prevent allocations
+	 * in the forbidden regions. For VF, mm_offset equals the VF base so
+	 * we convert to relative drm_mm space.
 	 */
-	if (start >= ggtt->start)
-		start -= ggtt->start;
+	if (start >= ggtt->mm_offset)
+		start -= ggtt->mm_offset;
 	else
 		start = 0;
 
-	/* Should never happen, but since we handle start, fail graciously for end */
-	if (end >= ggtt->start)
-		end -= ggtt->start;
+	if (end >= ggtt->mm_offset)
+		end -= ggtt->mm_offset;
 	else
 		end = 0;
 
@@ -923,7 +1002,7 @@ u64 xe_ggtt_largest_hole(struct xe_ggtt *ggtt, u64 alignment, u64 *spare)
 
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
-		hole_start = max(hole_start, ggtt->start);
+		hole_start = max(hole_start, ggtt->mm_offset);
 		hole_start = ALIGN(hole_start, alignment);
 		hole_end = ALIGN_DOWN(hole_end, alignment);
 		if (hole_start >= hole_end)
@@ -1098,7 +1177,7 @@ u64 xe_ggtt_print_holes(struct xe_ggtt *ggtt, u64 alignment, struct drm_printer
 
 	mutex_lock(&ggtt->lock);
 	drm_mm_for_each_hole(entry, mm, hole_start, hole_end) {
-		hole_start = max(hole_start, ggtt->start);
+		hole_start = max(hole_start, ggtt->mm_offset);
 		hole_start = ALIGN(hole_start, alignment);
 		hole_end = ALIGN_DOWN(hole_end, alignment);
 		if (hole_start >= hole_end)
@@ -1152,7 +1231,7 @@ u64 xe_ggtt_read_pte(struct xe_ggtt *ggtt, u64 offset)
 u64 xe_ggtt_node_addr(const struct xe_ggtt_node *node)
 {
 	/* pairs with WRITE_ONCE in xe_ggtt_shift_nodes() */
-	return node->base.start + READ_ONCE(node->ggtt->start);
+	return node->base.start + READ_ONCE(node->ggtt->mm_offset);
 }
 
 /**
#7 lore raw
Quoted 126 lines · Rodrigo Vivi
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 41 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

Quoted 5 lines
Quoted 2 lines

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Basically what the display needs is:
1. specify where in ggtt the buffer was originally placed by the GOP, this may be partially or fully inside these GuC reserved ranges
2. bind the buffer to some acceptable location (assuming the original location wasn't acceptable) without overwriting the PTEs for the original location

I suppose this could be achieved even with this "mm doesn't cover the ends" hack, but step 1 there becomes a bit dodgy because we can't insert the mm node if it's fully outside the mm. I suppose it could still work if you hide it in a function that only validates the real ggtt offsets, but then ignores the fact that the node can't be inserted due to being fully inside those reserved ranges. And then whatever cleans up that original mm node must also ignore the fact that the node maybe wasn't even allocated. And also xe_ggtt_initial_clear() will need special code to clear the reserved ranges.

My original idea was that we'd just include the reserved regions in the mm, and then the display could just keep the buffer at its original location, and later the guc code can reserve what is left over. So we could skip step 2 above completely. But after a second thought we probably don't want to skip that step because we might free the display bo later, at which point we might free up some of the reserved ranges. So I guess we'd still want to keep step 2. But I think it'd still result in less special cases in the code. We'd just need the guc code to reserve what it needs, after the display code has rebound the bo to an acceptable location.

So we'd end up with:
1. insert node for the bo's original ggtt location
2. rebind the display bo to an acceptable ggtt location
3. undo step 1
4. xe_ggtt_initial_clear() (now also clears the reserved ranges without any special code)
5. guc steals the reserved ranges explicitly

So only two special cases left really, and all the rest of the code is blissfully unaware of any of it.

Hmm, although hibernation might still be a slight issue for xe_ggtt_initial_clear(). As in how would the reserved regions get cleared during resume from hibernation? I have no idea how the current xe ggtt code handles resume at all...

Signature · 2 lines
Ville Syrjälä
Intel
author maintainer
#8 lore raw
Quoted 140 lines · Ville Syrjälä
Quoted 126 lines · Rodrigo Vivi
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 41 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

Quoted 5 lines
Quoted 2 lines

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Basically what the display needs is:
1. specify where in ggtt the buffer was originally placed by the GOP, this may be partially or fully inside these GuC reserved ranges
2. bind the buffer to some acceptable location (assuming the original location wasn't acceptable) without overwriting the PTEs for the original location

Quoted 10 lines

I suppose this could be achieved even with this "mm doesn't cover the ends" hack, but step 1 there becomes a bit dodgy because we can't insert the mm node if it's fully outside the mm. I suppose it could still work if you hide it in a function that only validates the real ggtt offsets, but then ignores the fact that the node can't be inserted due to being fully inside those reserved ranges. And then whatever cleans up that original mm node must also ignore the fact that the node maybe wasn't even allocated. And also xe_ggtt_initial_clear() will need special code to clear the reserved ranges.

right, so basically we could keep the xe_ggtt as is and provide 2 hooks:

1. one to reserve the portion of the BIOS FB that goes inside our managed ggtt area
2. a special clear for this area

And in between you do the rebind with existing infrastructure to an empty region?! Is this what you are thinking now?

Quoted 20 lines

My original idea was that we'd just include the reserved regions in the mm, and then the display could just keep the buffer at its original location, and later the guc code can reserve what is left over. So we could skip step 2 above completely. But after a second thought we probably don't want to skip that step because we might free the display bo later, at which point we might free up some of the reserved ranges. So I guess we'd still want to keep step 2. But I think it'd still result in less special cases in the code. We'd just need the guc code to reserve what it needs, after the display code has rebound the bo to an acceptable location.

So we'd end up with:
1. insert node for the bo's original ggtt location
2. rebind the display bo to an acceptable ggtt location
3. undo step 1
4. xe_ggtt_initial_clear() (now also clears the reserved ranges without any special code)
5. guc steals the reserved ranges explicitly

Quoted 7 lines

So only two special cases left really, and all the rest of the code is blissfully unaware of any of it.

Hmm, although hibernation might still be a slight issue for xe_ggtt_initial_clear(). As in how would the reserved regions get cleared during resume from hibernation? I have no idea how the current xe ggtt code handles resume at all...

The resume should only restore the pinned bo's one by one, nothing special. So I guess if we keep the original code we are okay, but if we start to managing the full range with the reserved areas we might have some difficulties here on the way...

Quoted 4 lines
Signature · 3 lines
-- 
Ville Syrjälä
Intel
#9 lore raw
Quoted 185 lines · Rodrigo Vivi
Quoted 140 lines · Ville Syrjälä
Quoted 126 lines · Rodrigo Vivi
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 41 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

Quoted 5 lines
Quoted 2 lines

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Basically what the display needs is:
1. specify where in ggtt the buffer was originally placed by the GOP, this may be partially or fully inside these GuC reserved ranges
2. bind the buffer to some acceptable location (assuming the original location wasn't acceptable) without overwriting the PTEs for the original location

Quoted 10 lines

I suppose this could be achieved even with this "mm doesn't cover the ends" hack, but step 1 there becomes a bit dodgy because we can't insert the mm node if it's fully outside the mm. I suppose it could still work if you hide it in a function that only validates the real ggtt offsets, but then ignores the fact that the node can't be inserted due to being fully inside those reserved ranges. And then whatever cleans up that original mm node must also ignore the fact that the node maybe wasn't even allocated. And also xe_ggtt_initial_clear() will need special code to clear the reserved ranges.

right, so basically we could keep the xe_ggtt as is and provide 2 hooks:

1. one to reserve the portion of the BIOS FB that goes inside our managed ggtt area
2. a special clear for this area

And in between you do the rebind with existing infrastructure to an empty region?! Is this what you are thinking now?

Quoted 23 lines

My original idea was that we'd just include the reserved regions in the mm, and then the display could just keep the buffer at its original location, and later the guc code can reserve what is left over. So we could skip step 2 above completely. But after a second thought we probably don't want to skip that step because we might free the display bo later, at which point we might free up some of the reserved ranges. So I guess we'd still want to keep step 2. But I think it'd still result in less special cases in the code. We'd just need the guc code to reserve what it needs, after the display code has rebound the bo to an acceptable location.

So we'd end up with:
1. insert node for the bo's original ggtt location
2. rebind the display bo to an acceptable ggtt location
3. undo step 1
4. xe_ggtt_initial_clear() (now also clears the reserved ranges without any special code)
5. guc steals the reserved ranges explicitly

So only two special cases left really, and all the rest of the code is blissfully unaware of any of it.

Quoted 7 lines
Quoted 4 lines

Hmm, although hibernation might still be a slight issue for xe_ggtt_initial_clear(). As in how would the reserved regions get cleared during resume from hibernation? I have no idea how the current xe ggtt code handles resume at all...

The resume should only restore the pinned bo's one by one, nothing special.

Looks like currently xe_ggtt_initial_clear() is never even called during resume from hibernation, so in that case parts of the GGTT will be left with whatever garbage the GOP put there. So that's one thing that needs fixing.

Quoted 3 lines

So I guess if we keep the original code we are okay, but if we start to managing the full range with the reserved areas we might have some difficulties here on the way...

If we had a full range mm I suppose we'd need a bit of special code to remove the reserved nodes before xe_ggtt_initial_clear() gets called, at least for the resume from hibernation case.

Signature · 2 lines
Ville Syrjälä
Intel
author maintainer
#10 lore raw
Quoted 199 lines · Ville Syrjälä
Quoted 185 lines · Rodrigo Vivi
Quoted 140 lines · Ville Syrjälä
Quoted 126 lines · Rodrigo Vivi
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 41 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

Quoted 5 lines
Quoted 2 lines

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Basically what the display needs is:
1. specify where in ggtt the buffer was originally placed by the GOP, this may be partially or fully inside these GuC reserved ranges
2. bind the buffer to some acceptable location (assuming the original location wasn't acceptable) without overwriting the PTEs for the original location

Quoted 10 lines

I suppose this could be achieved even with this "mm doesn't cover the ends" hack, but step 1 there becomes a bit dodgy because we can't insert the mm node if it's fully outside the mm. I suppose it could still work if you hide it in a function that only validates the real ggtt offsets, but then ignores the fact that the node can't be inserted due to being fully inside those reserved ranges. And then whatever cleans up that original mm node must also ignore the fact that the node maybe wasn't even allocated. And also xe_ggtt_initial_clear() will need special code to clear the reserved ranges.

right, so basically we could keep the xe_ggtt as is and provide 2 hooks:

1. one to reserve the portion of the BIOS FB that goes inside our managed ggtt area
2. a special clear for this area

And in between you do the rebind with existing infrastructure to an empty region?! Is this what you are thinking now?

Quoted 23 lines

My original idea was that we'd just include the reserved regions in the mm, and then the display could just keep the buffer at its original location, and later the guc code can reserve what is left over. So we could skip step 2 above completely. But after a second thought we probably don't want to skip that step because we might free the display bo later, at which point we might free up some of the reserved ranges. So I guess we'd still want to keep step 2. But I think it'd still result in less special cases in the code. We'd just need the guc code to reserve what it needs, after the display code has rebound the bo to an acceptable location.

So we'd end up with:
1. insert node for the bo's original ggtt location
2. rebind the display bo to an acceptable ggtt location
3. undo step 1
4. xe_ggtt_initial_clear() (now also clears the reserved ranges without any special code)
5. guc steals the reserved ranges explicitly

So only two special cases left really, and all the rest of the code is blissfully unaware of any of it.

Quoted 7 lines
Quoted 4 lines

Hmm, although hibernation might still be a slight issue for xe_ggtt_initial_clear(). As in how would the reserved regions get cleared during resume from hibernation? I have no idea how the current xe ggtt code handles resume at all...

The resume should only restore the pinned bo's one by one, nothing special.

Looks like currently xe_ggtt_initial_clear() is never even called during resume from hibernation, so in that case parts of the GGTT will be left with whatever garbage the GOP put there. So that's one thing that needs fixing.

Quoted 7 lines
Quoted 3 lines

So I guess if we keep the original code we are okay, but if we start to managing the full range with the reserved areas we might have some difficulties here on the way...

If we had a full range mm I suppose we'd need a bit of special code to remove the reserved nodes before xe_ggtt_initial_clear() gets called, at least for the resume from hibernation case.

it looks like Maarten suggestion fix the clear portion. But for the steps 1 and 3 above we would need a special reservation with a node area only within our managed area?!

something like (for step 1):

mm_start = max(start, ggtt->start);
mm_end = min(start + size, ggtt->start + ggtt->size);

node->base.start = mm_start - ggtt->start;
node->base.size = mm_end - mm_start;

drm_mm_reserve_node(&ggtt->mm, &node->base);

and another special function to delete this special node if needed to be created?

Or what do you have on mind for the full area? I believe the full area is this patch, but with some additions anyway since we need to handle this buffer plus ensure it gets reserved when we don't have it...

I'd like to avoid complications like the phys offset addition or the full range if possible.

Could you please incorporate something simple in a v2 of your series?

Thanks,
Rodrigo.

Quoted 4 lines
Signature · 3 lines
-- 
Ville Syrjälä
Intel
#11 lore raw
Quoted 217 lines · Rodrigo Vivi
Quoted 199 lines · Ville Syrjälä
Quoted 185 lines · Rodrigo Vivi
Quoted 140 lines · Ville Syrjälä
Quoted 126 lines · Rodrigo Vivi
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 41 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

Quoted 5 lines
Quoted 2 lines

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Basically what the display needs is:
1. specify where in ggtt the buffer was originally placed by the GOP, this may be partially or fully inside these GuC reserved ranges
2. bind the buffer to some acceptable location (assuming the original location wasn't acceptable) without overwriting the PTEs for the original location

Quoted 10 lines

I suppose this could be achieved even with this "mm doesn't cover the ends" hack, but step 1 there becomes a bit dodgy because we can't insert the mm node if it's fully outside the mm. I suppose it could still work if you hide it in a function that only validates the real ggtt offsets, but then ignores the fact that the node can't be inserted due to being fully inside those reserved ranges. And then whatever cleans up that original mm node must also ignore the fact that the node maybe wasn't even allocated. And also xe_ggtt_initial_clear() will need special code to clear the reserved ranges.

right, so basically we could keep the xe_ggtt as is and provide 2 hooks:

1. one to reserve the portion of the BIOS FB that goes inside our managed ggtt area
2. a special clear for this area

And in between you do the rebind with existing infrastructure to an empty region?! Is this what you are thinking now?

Quoted 23 lines

My original idea was that we'd just include the reserved regions in the mm, and then the display could just keep the buffer at its original location, and later the guc code can reserve what is left over. So we could skip step 2 above completely. But after a second thought we probably don't want to skip that step because we might free the display bo later, at which point we might free up some of the reserved ranges. So I guess we'd still want to keep step 2. But I think it'd still result in less special cases in the code. We'd just need the guc code to reserve what it needs, after the display code has rebound the bo to an acceptable location.

So we'd end up with:
1. insert node for the bo's original ggtt location
2. rebind the display bo to an acceptable ggtt location
3. undo step 1
4. xe_ggtt_initial_clear() (now also clears the reserved ranges without any special code)
5. guc steals the reserved ranges explicitly

So only two special cases left really, and all the rest of the code is blissfully unaware of any of it.

Quoted 7 lines
Quoted 4 lines

Hmm, although hibernation might still be a slight issue for xe_ggtt_initial_clear(). As in how would the reserved regions get cleared during resume from hibernation? I have no idea how the current xe ggtt code handles resume at all...

The resume should only restore the pinned bo's one by one, nothing special.

Looks like currently xe_ggtt_initial_clear() is never even called during resume from hibernation, so in that case parts of the GGTT will be left with whatever garbage the GOP put there. So that's one thing that needs fixing.

Quoted 7 lines
Quoted 3 lines

So I guess if we keep the original code we are okay, but if we start to managing the full range with the reserved areas we might have some difficulties here on the way...

If we had a full range mm I suppose we'd need a bit of special code to remove the reserved nodes before xe_ggtt_initial_clear() gets called, at least for the resume from hibernation case.

it looks like Maarten suggestion fix the clear portion. But for the steps 1 and 3 above we would need a special reservation with a node area only within our managed area?!

something like (for step 1):

mm_start = max(start, ggtt->start);
mm_end = min(start + size, ggtt->start + ggtt->size);

Quoted 7 lines

node->base.start = mm_start - ggtt->start;
node->base.size = mm_end - mm_start;

drm_mm_reserve_node(&ggtt->mm, &node->base);

and another special function to delete this special node if needed to be created?

Something like that could work.

Quoted 4 lines

Or what do you have on mind for the full area? I believe the full area is this patch, but with some additions anyway since we need to handle this buffer plus ensure it gets reserved when we don't have it...

From the display side the full mm approach shouldn't really look any different.

Quoted 2 lines

I'd like to avoid complications like the phys offset addition

What phys_offset addition are we talking about here?

Quoted 4 lines

or
the full range if possible.

Could you please incorporate something simple in a v2 of your series?

If you mean me and my initial fb series then I have no plan to post a v2 of that. What I posted is IMO just fine as is. The remaining broken corner cases can be fixed afterwards once we get that new thing to properly protect the current PTEs.

Signature · 2 lines
Ville Syrjälä
Intel
#12 lore raw
In reply to Rodrigo Vivi

Hello,

Quoted 214 lines · Rodrigo Vivi
Quoted 199 lines · Ville Syrjälä
Quoted 185 lines · Rodrigo Vivi
Quoted 140 lines · Ville Syrjälä
Quoted 126 lines · Rodrigo Vivi
Quoted 33 lines · Michal Wajdeczko
Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

hmm, but this an internal detail of the xe_ggtt implementation, so why would someone else complain about it?

Quoted 1 line

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead

hmm, for the record, this GGTT cap on the top was added back in 2023

commit ab10e976fbda8349163ceee2ce99b2bfc97031b8

Author: Daniele Ceraolo Spurio <[email protected]>
Date:   Wed Jun 14 10:47:54 2023 -0700

drm/xe: limit GGTT size to GUC_GGTT_TOP

(quoted diff) +8 -0
+        * The GuC address space is limited on both ends of the GGTT, because
+        * the GuC shim HW redirects accesses to those addresses to other HW
+        * areas instead of going through the GGTT. On the bottom end, the GuC
+        * can't access offsets below the WOPCM size, while on the top side the
+        * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
+        * checking each object to see if they are accessed by GuC or not, we
+        * just exclude those areas from the allocator. Additionally, to
+        * simplify the driver load, we use the maximum WOPCM size in this logic
Quoted 5 lines
Quoted 2 lines

of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

and that likely will not be changed by this patch as after allocating 'two permanent zones', the drm_mm_for_each_hole will not iterate over them

right...

Quoted 6 lines
Quoted 6 lines

Fix this for the PF case by initialising drm_mm over the full hardware GGTT range [0, total_size) and permanently reserving the two forbidden zones:

Quoted 6 lines
Quoted 2 lines

- [0, wopcm) — inaccessible below WOPCM
- [GUC_GGTT_TOP, total_size) — inaccessible above GUC_GGTT_TOP

that looks odds: why pretend to claim manageability of full [0, 4GB) of the GGTT and then immediately permanently reserve two end zones to end up with real [wopcm, GUC_TOP) which is what we already have?

yes...

Quoted 7 lines
Quoted 5 lines

A new mm_offset field (zero for PF) carries the base offset used in address conversions, unifying the existing VF relative model (where mm_offset == vf_base) with the new PF absolute model.

but public xe_ggtt API already uses absolute addressing in PF and VF

I know...

Quoted 11 lines
Quoted 8 lines

The public
xe_ggtt_start() / xe_ggtt_size() API continues to return the usable [wopcm, GUC_GGTT_TOP) boundaries, so callers such as the SR-IOV PF config code are unaffected.

xe_ggtt_shift_nodes() now updates both ggtt->start and ggtt->mm_offset so the VF recovery path remains a single O(1) WRITE_ONCE pair.

maybe it's just me - but I can't figure out the real rationale for this patch - what did I miss?

This series:
https://lore.kernel.org/intel-xe/[email protected]/

And more specifically the discussion in this patch:
https://lore.kernel.org/intel-xe/[email protected]/

Quoted 41 lines
Quoted 20 lines
Cc Michal Wajdeczko <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Assisted-by GitHub-Copilot:claude-sonnet-4.6
---
 drivers/gpu/drm/xe/xe_ggtt.c | 123 ++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
index a351c578b170..00a6cd2b8a51 100644
@@ -137,6 +137,17 @@ struct xe_ggtt {
 	const struct xe_ggtt_pt_ops *pt_ops;
 	/** @mm: The memory manager used to manage individual GGTT allocations */
 	struct drm_mm mm;
+	/**

drivers/gpu/drm/xe/xe_ggtt.c struct xe_ggtt { · line 150

Quoted 10 lines
drivers/gpu/drm/xe/xe_ggtt.c +10 -0
+	 * @mm_offset: base offset added to drm_mm node addresses to obtain hardware
+	 * GGTT addresses. For PF this is 0 (drm_mm uses absolute hardware addresses).
+	 * For VF this equals @start (drm_mm uses relative addresses from VF base).
+	 * Updated atomically by xe_ggtt_shift_nodes() during VF recovery.
+	 */
+	u64 mm_offset;
+	/** @reserved_bottom: permanently reserved [0, WOPCM) drm_mm node for PF */
+	struct drm_mm_node reserved_bottom;
+	/** @reserved_top: permanently reserved [GUC_GGTT_TOP, total) drm_mm node for PF */
+	struct drm_mm_node reserved_top;

maybe all we need is to separate concepts of:

* raw GGTT - fixed range [0, 4GB)

from

* allocable GGTT - configurable sub-range [start, end)
* [wopcm, GUC_TOP) on PF
* [base, base+size) on VF

Quoted 5 lines
Quoted 2 lines

and then we can continue to use drm_mm.init(0, end-start) to manage that [start, end) range in a common way on both PF and VF?

we need to be able to use a ggtt buffer that comes out of this range, so I'm afraid it doesn't solve all the cases.

Basically what the display needs is:
1. specify where in ggtt the buffer was originally placed by the GOP, this may be partially or fully inside these GuC reserved ranges
2. bind the buffer to some acceptable location (assuming the original location wasn't acceptable) without overwriting the PTEs for the original location

Quoted 10 lines

I suppose this could be achieved even with this "mm doesn't cover the ends" hack, but step 1 there becomes a bit dodgy because we can't insert the mm node if it's fully outside the mm. I suppose it could still work if you hide it in a function that only validates the real ggtt offsets, but then ignores the fact that the node can't be inserted due to being fully inside those reserved ranges. And then whatever cleans up that original mm node must also ignore the fact that the node maybe wasn't even allocated. And also xe_ggtt_initial_clear() will need special code to clear the reserved ranges.

right, so basically we could keep the xe_ggtt as is and provide 2 hooks:

1. one to reserve the portion of the BIOS FB that goes inside our managed ggtt area
2. a special clear for this area

And in between you do the rebind with existing infrastructure to an empty region?! Is this what you are thinking now?

Quoted 23 lines

My original idea was that we'd just include the reserved regions in the mm, and then the display could just keep the buffer at its original location, and later the guc code can reserve what is left over. So we could skip step 2 above completely. But after a second thought we probably don't want to skip that step because we might free the display bo later, at which point we might free up some of the reserved ranges. So I guess we'd still want to keep step 2. But I think it'd still result in less special cases in the code. We'd just need the guc code to reserve what it needs, after the display code has rebound the bo to an acceptable location.

So we'd end up with:
1. insert node for the bo's original ggtt location
2. rebind the display bo to an acceptable ggtt location
3. undo step 1
4. xe_ggtt_initial_clear() (now also clears the reserved ranges without any special code)
5. guc steals the reserved ranges explicitly

So only two special cases left really, and all the rest of the code is blissfully unaware of any of it.

Quoted 7 lines
Quoted 4 lines

Hmm, although hibernation might still be a slight issue for xe_ggtt_initial_clear(). As in how would the reserved regions get cleared during resume from hibernation? I have no idea how the current xe ggtt code handles resume at all...

The resume should only restore the pinned bo's one by one, nothing special.

Looks like currently xe_ggtt_initial_clear() is never even called during resume from hibernation, so in that case parts of the GGTT will be left with whatever garbage the GOP put there. So that's one thing that needs fixing.

Quoted 7 lines
Quoted 3 lines

So I guess if we keep the original code we are okay, but if we start to managing the full range with the reserved areas we might have some difficulties here on the way...

If we had a full range mm I suppose we'd need a bit of special code to remove the reserved nodes before xe_ggtt_initial_clear() gets called, at least for the resume from hibernation case.

it looks like Maarten suggestion fix the clear portion. But for the steps 1 and 3 above we would need a special reservation with a node area only within our managed area?!

something like (for step 1):

Quoted 7 lines

mm_start = max(start, ggtt->start);
mm_end = min(start + size, ggtt->start + ggtt->size);

node->base.start = mm_start - ggtt->start;
node->base.size = mm_end - mm_start;

drm_mm_reserve_node(&ggtt->mm, &node->base);

I completely missed this, but that function exists.

Extend xe_ggtt_insert_node to xe_ggtt_insert_node_at, and xe_ggtt_node_remove. The display code needs to truncate start/end/size as needed, because size is passed as argument.

The proposal I made in the original series that spawned this discussion, had the same idea. You can argue the clipping should be done by xe_ggtt, in which case I'm open for a xe_ggtt_node_reserve_region(begin, end), with clipping done by xe_ggtt. But I believe xe_ggtt_insert_node_at is more generic, and can be used in more places.

This also removes the workaround we added that required adding 'xe_ggtt_insert_bo_at'

Quoted 9 lines

and another special function to delete this special node if needed to be created?

Or what do you have on mind for the full area? I believe the full area is this patch, but with some additions anyway since we need to handle this buffer plus ensure it gets reserved when we don't have it...

Quoted 12 lines

I'd like to avoid complications like the phys offset addition or the full range if possible.

Could you please incorporate something simple in a v2 of your series?

Thanks,
Rodrigo.

Quoted 4 lines
Signature · 3 lines
-- 
Ville Syrjälä
Intel

Kind regards,
~Maarten Lankhorst

#13 lore raw

PATCH 1/1 drm/xe/ggtt: clear reserved area at GUC_GGTT_TOP.

In reply to Rodrigo Vivi

Hello,

Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

This is still the case, only we add a separate variable now that is usually 0. We always have to ensure that this is correctly accounted
for, otherwise we get subtle bugs, so there's no reason not to use it, if it's already used everywhere.

Whether it's 0 or wopcm_start doesn't change the result.

Quoted 3 lines

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

This is a valid concern, but it's very easily be fixed inside the initial clear by calling xe_ggtt_clear once more with a comment for !VF case.

Something like below is enough to fix it. Adding a reserved region at the end/start is not the way to do so and just adds more complications.
---8<---
When initialising GGTT, we never clear the part above GUC_GGTT_TOP. Add a member to &xe_ggtt that holds the full GGTT size, and clear it during the pass at xe_ggtt_initial_clear.

---

drivers/gpu/drm/xe/xe_ggtt.c +9 -1
index 8ec23862477fc..497b99a932f0d 100644
@@ -115,6 +115,8 @@ struct xe_ggtt {
 	u64 start;
 	/** @size: Total usable size of this GGTT */
 	u64 size;
+	/** @entire_size: complete size of the accessible GGTT, reserved regions inclusive */
+	u64 entire_size;
 	/**
 	 * @flags: Flags for this GGTT.
 	 * Acceptable flags:
@@ -406,7 +408,8 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 			return -ENOMEM;
 		}
 		ggtt_start = wopcm;
-		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE - ggtt_start;
+		ggtt->entire_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE;
+		ggtt_size = ggtt->entire_size - ggtt_start;
 	} else {
 		ggtt_start = xe_tile_sriov_vf_ggtt_base(ggtt->tile);
 		ggtt_size = xe_tile_sriov_vf_ggtt(ggtt->tile);
@@ -417,6 +420,7 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 				    ggtt_start, ggtt_start + ggtt_size - 1);
 			return -ERANGE;
 		}
+		ggtt->entire_size = ggtt_size;
 	}
 
 	ggtt->gsm = ggtt->tile->mmio.regs + SZ_8M;
@@ -461,6 +465,10 @@ static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
 	drm_mm_for_each_hole(hole, &ggtt->mm, start, end)
 		xe_ggtt_clear(ggtt, ggtt->start + start, end - start);
 
+	end = ggtt->start + ggtt->size;
+	if (ggtt->entire_size > end)
+		xe_ggtt_clear(ggtt, end, ggtt->entire_size - end);
+
 	xe_ggtt_invalidate(ggtt);
 	mutex_unlock(&ggtt->lock);
 }
#14 lore raw

Re: [PATCH] drm/xe/ggtt: clear reserved area at GUC_GGTT_TOP.

Quoted 65 lines · Maarten Lankhorst

Hello,

Quoted 7 lines · Rodrigo Vivi

The PF GGTT allocator was initialised over a relative [0, usable_size) range, with ggtt->start added on every address conversion to get the actual hardware address. Two consequences of that model were considered "horrible hacks":

- ggtt->start (the WOPCM offset) had to be carried around and added to every drm_mm result.

This is still the case, only we add a separate variable now that is usually 0. We always have to ensure that this is correctly accounted
for, otherwise we get subtle bugs, so there's no reason not to use it, if it's already used everywhere.

Whether it's 0 or wopcm_start doesn't change the result.

Quoted 3 lines

- The GUC_GGTT_TOP ceiling silently truncated the GGTT range instead of being made explicit, leaving PTEs in [GUC_GGTT_TOP, total_size) untouched during the initial clear.

This is a valid concern, but it's very easily be fixed inside the initial clear by calling xe_ggtt_clear once more with a comment for !VF case.

Something like below is enough to fix it. Adding a reserved region at the end/start is not the way to do so and just adds more complications.
---8<---
When initialising GGTT, we never clear the part above GUC_GGTT_TOP. Add a member to &xe_ggtt that holds the full GGTT size, and clear it during the pass at xe_ggtt_initial_clear.

---

drivers/gpu/drm/xe/xe_ggtt.c +5 -1
index 8ec23862477fc..497b99a932f0d 100644
@@ -115,6 +115,8 @@ struct xe_ggtt {
 	u64 start;
 	/** @size: Total usable size of this GGTT */
 	u64 size;
+	/** @entire_size: complete size of the accessible GGTT, reserved regions inclusive */
+	u64 entire_size;
 	/**
 	 * @flags: Flags for this GGTT.
 	 * Acceptable flags:
@@ -406,7 +408,8 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 			return -ENOMEM;
 		}
 		ggtt_start = wopcm;
-		ggtt_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE - ggtt_start;
+		ggtt->entire_size = (gsm_size / 8) * (u64)XE_PAGE_SIZE;
+		ggtt_size = ggtt->entire_size - ggtt_start;
 	} else {
 		ggtt_start = xe_tile_sriov_vf_ggtt_base(ggtt->tile);
 		ggtt_size = xe_tile_sriov_vf_ggtt(ggtt->tile);
@@ -417,6 +420,7 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
 				    ggtt_start, ggtt_start + ggtt_size - 1);
 			return -ERANGE;
 		}
+		ggtt->entire_size = ggtt_size;
 	}
 
 	ggtt->gsm = ggtt->tile->mmio.regs + SZ_8M;

drivers/gpu/drm/xe/xe_ggtt.c static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt) · line 470

Quoted 6 lines
drivers/gpu/drm/xe/xe_ggtt.c +3 -0
@@ -461,6 +465,10 @@ static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
 	drm_mm_for_each_hole(hole, &ggtt->mm, start, end)
 		xe_ggtt_clear(ggtt, ggtt->start + start, end - start);
 
+	end = ggtt->start + ggtt->size;
+	if (ggtt->entire_size > end)
+		xe_ggtt_clear(ggtt, end, ggtt->entire_size - end);

You'll need the same thing for the 0 to ggtt->start range.

Quoted 4 lines
drivers/gpu/drm/xe/xe_ggtt.c +1 -0
+
 	xe_ggtt_invalidate(ggtt);
 	mutex_unlock(&ggtt->lock);
 }
Signature · 2 lines
Ville Syrjälä
Intel