Add support for Agilex3 SoCFPGA board
v4 cover Add support for Agilex3 SoCFPGA board
From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a low cost and small form factor development kit similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference being the number of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.
This series includes:
- The addition of the Agilex3 compatible in DT bindings.
- The initial board device tree support for the Agilex3 SoCFPGA.
Note:
The patch 2 depends on the series: "Add iommu supports"
https://lore.kernel.org/all/[email protected]/
Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19
v4 changes:
- Retained v3 Reviewed-by for dt bindings patch.
- Update commit message formatting for dts patch.
- Use agilex5 dtsi instead of creating new agilex3 dtsi.
- Update qspi node parititions in dts patch.
v3 link:
https://lore.kernel.org/all/[email protected]/
v3 changes:
- Add missing agilex5 fallback in dt bindings
v2 link:
https://lore.kernel.org/all/[email protected]/
v2 changes:
- Add separate agilex3 compatible.
- Use separate dtsi file for Agilex3.
v1 link:
https://lore.kernel.org/all/[email protected]/
Niravkumar L Rabara (2):
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: socfpga: add Agilex3 board
.../bindings/arm/intel,socfpga.yaml | 6 + arch/arm64/boot/dts/intel/Makefile | 1 + .../boot/dts/intel/socfpga_agilex3_socdk.dts | 132 ++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
Signature · 1 line
2.25.1
PATCH v4 1/2 dt-bindings: intel: Add Agilex3 SoCFPGA board
From: Niravkumar L Rabara <[email protected]>
Add compatible string for Agilex3 SoCFPGA board, which shares the same architecture as Agilex5 but with two fewer CPU cores.
---
v4 changes:
- No change, retained Reviewed-by from v3.
v3 link:
https://lore.kernel.org/all/[email protected]/
v3 changes:
- Add missing agilex5 fallback.
v2 changes:
- Add separate agilex3 compatible instead of using agilex5 context.
Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +6 -0
@@ -21,6 +21,12 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex3 boards + items: + - enum: + - intel,socfpga-agilex3-socdk + - const: intel,socfpga-agilex3 + - const: intel,socfpga-agilex5 - description: Agilex5 boards items: - enum:
Signature · 1 line
2.25.1
PATCH v4 2/2 arm64: dts: socfpga: add Agilex3 board
In reply to [email protected]From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a small form factor board similar to Agilex5 013b board. Agilex3 is derived from Agilex5 SoCFPGA, with the main difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.
---
v4 changes:
- Update commit message formatting.
- Use agilex5 dtsi instead of creating new agilex3 dtsi.
- Update qspi node parititions.
v3 link:
https://lore.kernel.org/all/[email protected]/
v3 change:
- Add agilex5 fallback compatible string.
v2 changes:
- Use separate dtsi file for agilex3 instead of using agilex5 dtsi.
arch/arm64/boot/dts/intel/Makefile | 1 + .../boot/dts/intel/socfpga_agilex3_socdk.dts | 132 ++++++++++++++++++ 2 files changed, 133 insertions(+) create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
arch/arm64/boot/dts/intel/Makefile +1 -0
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ + socfpga_agilex3_socdk.dtb \ socfpga_agilex5_socdk.dtb \ socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_nand.dtb \
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file +132 -0
132 lines not on this page · raw message
Signature · 1 line
2.25.1
Dinh Nguyen
AppliedQuoted 14 lines · On 11/13/25 18:59, [email protected] wrote:
From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a low cost and small form factor development kit similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference being the number of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.This series includes:
- The addition of the Agilex3 compatible in DT bindings.
- The initial board device tree support for the Agilex3 SoCFPGA.
Quoted 7 lines
Note:
The patch 2 depends on the series: "Add iommu supports"
https://lore.kernel.org/all/[email protected]/Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19
Applied!
Thanks,
Dinh