Board is not booting after Removing ARM JTAG PARTNER

hi all,

As far as now i am porting ubootloader on IMX board on arm11 processor. for debugging i am using ARM PARTNER jtag.The problem i am facing after resetting the arm board.on minicom it doesnot print anything.

when JTAG is connected to board through jumper my bootloader code is working fine
and it print all serial and lan related printing on minicom.and i am also able to execute assembly code in uboot file using JTAG.there is an seven segment display which is also working fine.

In JTAG CFG file i commented out all the initialization related to target.and some few things are related to jtag are left which is not required for target.bootloader works fine if i am using CFG with commented part.and if i removed JTAG from board it doesnot print anything on minicom.i dont know which point is culprit.

Could you send me the solution.

Thanks and regards
sanjeev sharma

View this message in context: http://www.nabble.com/Board-is-not-booting-after-Removing-ARM-JTAG-PARTNER-tf2958485.html#a8276403
Sent from the Uboot - Users mailing list archive at Nabble.com.