Patch: Make ACPI subsystem provide CEDT table
A message that is not in the archive (sent off-list or not yet received): [email protected]
This is a simple ACPI patch. I'm submitting a revised version to linux-acpi per Rafael Wysocki and linux-cxl per Dan Williams.
The patch has been moved to the message body and a Signed-off-by tag has been added. Thunderbird has added CRs so "patch -p1 -l" is needed. To address other points:
Q. Dan Williams said: Yes, although I don't see much incremental benefit to developers publishing a root only raw table... So, not opposed to the patch, but I want to direct you to the sysfs representation of the CEDT and CFMWS in /sys/bus/cxl/devices... Platform firmware CXL details are modeled as "CXL root" objects in the /sys/bus/cxl device model.
A. The patch is being submitted in connection with work on a CXL bridge. The developers would like to express appreciation for the "sysfs" point. They find it useful to be able to do initialization through the table but will look at the "sysfs" approach.
Q. Rafael J. Wysocki said: I'm not sure why the #ifdef is needed.
A. I reviewed cxl-next and decided to add the #ifdef to ensure that the code would compile regardless of the direction that the codebase takes.
==== start of patch ====
Subject: Make ACPI subsystem provide CEDT table
This is a simple patch to the ACPI subsystem. The patch adds ACPI _SIG_CEDT to table_sigs[] in "drivers/acpi/tables.c".
Presently, CXL code isn't able to make use of the CEDT table at the initrd stage. Subsequent to the change, the CEDT table can be used.
If a developer plans to use the CEDT table to program the CXL ports, this change is needed. Otherwise, it isn't expected to make a difference.
I certify compliance with Developer’s Certificate of Origin 1.1 as listed in:
https://www.kernel.org/doc/html/v4.10/process/submitting-patches.
html
drivers/acpi/tables.c +3 -0
@@ -500,6 +500,9 @@ACPI_SIG_WDDT ,ACPI_SIG_WDRT ,ACPI_SIG_DSDT ,ACPI_SIG_FADT ,ACPI_SIG_PSDT ,ACPI_SIG_RSDT ,ACPI_SIG_XSDT ,ACPI_SIG_SSDT ,ACPI_SIG_IORT ,ACPI_SIG_NFIT ,ACPI_SIG_HMAT ,ACPI_SIG_PPTT , +#ifdef ACPI_SIG_CEDT +ACPI_SIG_CEDT , +#endif ACPI_SIG_NHLT };#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
==== end of patch ====
Rafael J. Wysocki
maintainerQuoted 19 lines · Robert Kiraly
This is a simple ACPI patch. I'm submitting a revised version to linux-acpi per Rafael Wysocki and linux-cxl per Dan Williams.
The patch has been moved to the message body and a Signed-off-by tag has been added. Thunderbird has added CRs so "patch -p1 -l" is needed. To address other points:
Q. Dan Williams said: Yes, although I don't see much incremental benefit to developers publishing a root only raw table... So, not opposed to the patch, but I want to direct you to the sysfs representation of the CEDT and CFMWS in
/sys/bus/cxl/devices... Platform firmware CXL details are modeled as "CXL root" objects in the/sys/bus/cxldevice model.A. The patch is being submitted in connection with work on a CXL bridge. The developers would like to express appreciation for the "sysfs" point. They find it useful to be able to do initialization through the table but will look at the "sysfs" approach.
Quoted 4 lines
Q. Rafael J. Wysocki said: I'm not sure why the #ifdef is needed.
A. I reviewed cxl-next and decided to add the #ifdef to ensure that the code would compile regardless of the direction that the codebase takes.
ACPI_SIG_CEDT is defined in 5.17-rc1 AFAICS, so the #ifdef is redundant.
Quoted 35 lines
==== start of patch ====
Subject: Make ACPI subsystem provide CEDT tableSigned-off-by Robert Kiraly <[email protected]>This is a simple patch to the ACPI subsystem. The patch adds ACPI
_SIG_CEDTto table_sigs[] in "drivers/acpi/tables.c".Presently, CXL code isn't able to make use of the CEDT table at the initrd stage. Subsequent to the change, the CEDT table can be used.
If a developer plans to use the CEDT table to program the CXL ports, this change is needed. Otherwise, it isn't expected to make a difference.
I certify compliance with Developer’s Certificate of Origin 1.1 as listed in:
https://www.kernel.org/doc/html/v4.10/process/submitting-patches.
htmldrivers/acpi/tables.c +3
-0@@ -500,6 +500,9 @@ACPI_SIG_WDDT ,ACPI_SIG_WDRT ,ACPI_SIG_DSDT ,ACPI_SIG_FADT ,ACPI_SIG_PSDT ,ACPI_SIG_RSDT ,ACPI_SIG_XSDT ,ACPI_SIG_SSDT ,ACPI_SIG_IORT ,ACPI_SIG_NFIT ,ACPI_SIG_HMAT ,ACPI_SIG_PPTT , +#ifdef ACPI_SIG_CEDT +ACPI_SIG_CEDT , +#endif ACPI_SIG_NHLT };#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)==== end of patch ====
Quoted 2 lines · Rafael J. Wysocki
ACPI_SIG_CEDTis defined in 5.17-rc1 AFAICS, so the #ifdef is redundant.
Noted. Thank you. Should I resubmit without the #ifdef or if the patch is accepted can it be removed by upstream?
Rafael J. Wysocki
maintainerQuoted 7 lines · Robert Kiraly
Quoted 2 lines · Rafael J. Wysocki
ACPI_SIG_CEDTis defined in 5.17-rc1 AFAICS, so the #ifdef is redundant.Noted. Thank you. Should I resubmit without the #ifdef or if the patch is accepted can it be removed by upstream?
Please resubmit it without the #ifdef.
This is a simple ACPI patch. I'm submitting a revised version to linux-acpi per Rafael Wysocki and linux-cxl per Dan Williams.
Thunderbird has added CRs so "patch -p1 -l" is needed.
==== start of patch ====
Subject: Make ACPI subsystem provide CEDT table
This is a simple patch to the ACPI subsystem. The patch adds ACPI _SIG_CEDT to table_sigs[] in "drivers/acpi/tables.c".
Presently, CXL code isn't able to make use of the CEDT table at the initrd stage. Subsequent to the change, the CEDT table can be used.
If a developer plans to use the CEDT table to program the CXL ports, this change is needed. Otherwise, it isn't expected to make a difference.
I certify compliance with Developer’s Certificate of Origin 1.1 as listed in:
https://www.kernel.org/doc/html/v4.10/process/submitting-patches.
html
drivers/acpi/tables.c +1 -1
@@ -500,7 +500,7 @@ACPI_SIG_WDDT ,ACPI_SIG_WDRT ,ACPI_SIG_DSDT ,ACPI_SIG_FADT ,ACPI_SIG_PSDT ,ACPI_SIG_RSDT ,ACPI_SIG_XSDT ,ACPI_SIG_SSDT ,ACPI_SIG_IORT ,ACPI_SIG_NFIT ,ACPI_SIG_HMAT ,ACPI_SIG_PPTT , - ACPI_SIG_NHLT }; + ACPI_SIG_CEDT, ACPI_SIG_NHLT };#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
==== end of patch ====
Quoted 37 lines · Robert Kiraly
This is a simple ACPI patch. I'm submitting a revised version to linux-acpi per Rafael Wysocki and linux-cxl per Dan Williams.
Thunderbird has added CRs so "patch -p1 -l" is needed.
==== start of patch ====
Subject: Make ACPI subsystem provide CEDT tableSigned-off-by Robert Kiraly <[email protected]>This is a simple patch to the ACPI subsystem. The patch adds ACPI
_SIG_CEDTto table_sigs[] in "drivers/acpi/tables.c".Presently, CXL code isn't able to make use of the CEDT table at the initrd stage. Subsequent to the change, the CEDT table can be used.
If a developer plans to use the CEDT table to program the CXL ports, this change is needed. Otherwise, it isn't expected to make a difference.
I certify compliance with Developer’s Certificate of Origin 1.1 as listed in:
https://www.kernel.org/doc/html/v4.10/process/submitting-patches.
htmldrivers/acpi/tables.c +1
-1@@ -500,7 +500,7 @@ACPI_SIG_WDDT ,ACPI_SIG_WDRT ,ACPI_SIG_DSDT ,ACPI_SIG_FADT ,ACPI_SIG_PSDT ,ACPI_SIG_RSDT ,ACPI_SIG_XSDT ,ACPI_SIG_SSDT ,ACPI_SIG_IORT ,ACPI_SIG_NFIT ,ACPI_SIG_HMAT ,ACPI_SIG_PPTT , - ACPI_SIG_NHLT }; + ACPI_SIG_CEDT, ACPI_SIG_NHLT };#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
Quoted 1 line
==== end of patch ====
I've queued up this change for 5.18, but I needed to rebase the patch and I changed its subject and changelog.
Thanks!
Quoted 5 lines · Rafael J. Wysocki
I've queued up this change for 5.18, but I needed to rebase the patch and I changed its subject and changelog.
Thanks!
Thank you for your time and patience in discussion of issues.