Skip to contentSkip to conversation

w1: netlink: fix spelling mistakes in comments

PATCH In review Ivy Lopez 2 participants 4 messages Aug 11 – Sep 4 W1 dallas's 1-wire bus

lore
Share & tools
lore

Ivy Lopez

author
#0 lore raw

PATCH 1/1 w1: netlink: fix spelling mistakes in comments

Correct several typos in comments: "appeneded"/"appened" -> "appended", "Direclty" -> "Directly", "compariable" -> "comparable", "duplicats" -> "duplicates".

No functional change.

---
 drivers/w1/w1_netlink.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/w1/w1_netlink.c +6 -6
index e6b59d921076..ac541a8fc274 100644
@@ -23,9 +23,9 @@ struct w1_cb_block {
 	u16 maxlen;
 	/* pointers to building up the reply message */
 	struct cn_msg *first_cn; /* fixed once the structure is populated */
-	struct cn_msg *cn; /* advances as cn_msg is appeneded */
-	struct w1_netlink_msg *msg; /* advances as w1_netlink_msg is appened */
-	struct w1_netlink_cmd *cmd; /* advances as cmds are appened */
+	struct cn_msg *cn; /* advances as cn_msg is appended */
+	struct w1_netlink_msg *msg; /* advances as w1_netlink_msg is appended */
+	struct w1_netlink_cmd *cmd; /* advances as cmds are appended */
 	struct w1_netlink_msg *cur_msg; /* currently message being processed */
 	/* copy of the original request follows */
 	struct cn_msg request_cn;
@@ -49,8 +49,8 @@ struct w1_cb_node {
  * @block: block to calculate
  *
  * Calculates the current message length including possible multiple
- * cn_msg and data, excludes the first sizeof(struct cn_msg).  Direclty
- * compariable to maxlen and usable to send the message.
+ * cn_msg and data, excludes the first sizeof(struct cn_msg).  Directly
+ * comparable to maxlen and usable to send the message.
  */
 static u16 w1_reply_len(struct w1_cb_block *block)
 {
@@ -581,7 +581,7 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp)
 		int size;
 		int reply_size = sizeof(*cn) + cn->len + slave_len;
 		if (cn->flags & W1_CN_BUNDLE) {
-			/* bundling duplicats some of the messages */
+			/* bundling duplicates some of the messages */
 			reply_size += 2 * cmd_count * (sizeof(struct cn_msg) +
 				sizeof(struct w1_netlink_msg) +
 				sizeof(struct w1_netlink_cmd));
Signature · 1 line
2.55.0
#1 lore raw
Quoted 9 lines · Ivy Lopez

Correct several typos in comments: "appeneded"/"appened" -> "appended", "Direclty" -> "Directly", "compariable" -> "comparable", "duplicats" -> "duplicates".

No functional change.

---
 drivers/w1/w1_netlink.c | 12 ++++++------

Did you investigate / fix all such typos in entire w1 subsystem?

Best regards,
Krzysztof

author
#2 lore raw

PATCH 1/1 w1: fix spelling mistakes in comments across the subsystem

In reply to Ivy Lopez

Following up on a prior patch that only fixed w1_netlink.c, sweep the rest of the w1 subsystem for the same class of comment typos:
"loosing" -> "losing", "deatch" -> "detach", "messagse" -> "messages", "continusly" -> "continuously", "attribut" -> "attribute", "deactive" -> "deactivate", "determing" -> "determining", "discrepency" -> "discrepancy", "rerurn" -> "return".

No functional change.

---
 drivers/w1/masters/ds2482.c    | 2 +-
 drivers/w1/masters/ds2490.c    | 4 ++--
 drivers/w1/masters/omap_hdq.c  | 2 +-
 drivers/w1/slaves/w1_ds28e17.c | 2 +-
 drivers/w1/slaves/w1_therm.c   | 2 +-
 drivers/w1/w1.c                | 2 +-
 drivers/w1/w1_family.c         | 2 +-
 drivers/w1/w1_netlink.h        | 2 +-
 8 files changed, 9 insertions(+), 9 deletions(-)
drivers/w1/masters/ds2482.c +1 -1
index 0069e6f854d7..040d66415a9b 100644
@@ -421,7 +421,7 @@ static u8 ds2482_w1_set_pullup(void *data, int delay)
 
 	/* if delay is non-zero activate the pullup,
 	 * the strong pullup will be automatically deactivated
-	 * by the master, so do not explicitly deactive it
+	 * by the master, so do not explicitly deactivate it
 	 */
 	if (delay) {
 		/* both waits are crucial, otherwise devices might not be
drivers/w1/masters/ds2490.c +2 -2
index aa1f57f74397..3a0740d91a53 100644
@@ -562,7 +562,7 @@ static int ds_write_bit(struct ds_device *dev, u8 bit)
 
 	/* Set COMM_ICP to write without a readback.  Note, this will
 	 * produce one time slot, a down followed by an up with COMM_D
-	 * only determing the timing.
+	 * only determining the timing.
 	 */
 	err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_ICP |
 		(bit ? COMM_D : 0), 0);
@@ -691,7 +691,7 @@ static void ds9490r_search(void *data, struct w1_master *master,
 	 * If the number of devices found is less than or equal to the
 	 * search_limit, that number of IDs will be returned.  If there are
 	 * more, search_limit IDs will be returned followed by a non-zero
-	 * discrepency value.
+	 * discrepancy value.
 	 */
 	struct ds_device *dev = data;
 	int err;
drivers/w1/masters/omap_hdq.c +1 -1
index d13db3396570..0982efa2b25b 100644
@@ -282,7 +282,7 @@ static int omap_hdq_break(struct hdq_data *hdq_data)
 	}
 
 	/*
-	 * wait for both INIT and GO bits rerurn to zero.
+	 * wait for both INIT and GO bits return to zero.
 	 * zero wait time expected for interrupt mode.
 	 */
 	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
drivers/w1/slaves/w1_ds28e17.c +1 -1
index e53bc41bde3c..d656233afe54 100644
@@ -101,7 +101,7 @@ static int w1_f19_i2c_busy_wait(struct w1_slave *sl, size_t count)
 		timebases[data->speed] * (data->stretch) * count
 		+ W1_F19_BUSY_GRATUITY);
 
-	/* Now continusly check the busy flag sent by the DS28E17. */
+	/* Now continuously check the busy flag sent by the DS28E17. */
 	checks = W1_F19_BUSY_CHECKS;
 	while ((checks--) > 0) {
 		/* Return success if the busy flag is cleared. */
drivers/w1/slaves/w1_therm.c +1 -1
index d96b224e2215..02acf84ffec5 100644
@@ -355,7 +355,7 @@ static DEVICE_ATTR_RW(alarms);
 static DEVICE_ATTR_RW(conv_time);
 static DEVICE_ATTR_RW(features);
 
-static DEVICE_ATTR_RW(therm_bulk_read); /* attribut at master level */
+static DEVICE_ATTR_RW(therm_bulk_read); /* attribute at master level */
 
 /* Interface Functions declaration */
 
drivers/w1/w1.c +1 -1
index 486f321eadc8..67ea14a06319 100644
@@ -1177,7 +1177,7 @@ int w1_process(void *data)
 
 		__set_current_state(TASK_INTERRUPTIBLE);
 
-		/* hold list_mutex until after interruptible to prevent loosing
+		/* hold list_mutex until after interruptible to prevent losing
 		 * the wakeup signal when async_cmd is added.
 		 */
 		mutex_unlock(&dev->list_mutex);
drivers/w1/w1_family.c +1 -1
index 97da4f156e9a..8152a43c8c76 100644
@@ -67,7 +67,7 @@ void w1_unregister_family(struct w1_family *fent)
 	}
 	spin_unlock(&w1_flock);
 
-	/* deatch devices using this family code */
+	/* detach devices using this family code */
 	w1_reconnect_slaves(fent, 0);
 
 	while (atomic_read(&fent->refcnt)) {
drivers/w1/w1_netlink.h +1 -1
index 449680a61569..1818a06740eb 100644
@@ -14,7 +14,7 @@
 /**
  * enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags
  *
- * @W1_CN_BUNDLE: Request bundling replies into fewer messagse.  Be prepared
+ * @W1_CN_BUNDLE: Request bundling replies into fewer messages.  Be prepared
  * to handle multiple struct cn_msg, struct w1_netlink_msg, and
  * struct w1_netlink_cmd in one packet.
  */
Signature · 1 line
2.55.0
#3 lore raw

Re: [PATCH] w1: fix spelling mistakes in comments across the subsystem

Quoted 8 lines · Ivy Lopez

Following up on a prior patch that only fixed w1_netlink.c, sweep the rest of the w1 subsystem for the same class of comment typos:
"loosing" -> "losing", "deatch" -> "detach", "messagse" -> "messages", "continusly" -> "continuously", "attribut" -> "attribute", "deactive" -> "deactivate", "determing" -> "determining", "discrepency" -> "discrepancy", "rerurn" -> "return".

No functional change.

I don't know how to apply this - getting series it pulls power supply:
Looking up [email protected]
Breaking thread to remove parents of [email protected]
Checking for newer revisions
Grabbing search results from lore.kernel.org
Added from v2: 1 patches
Analyzing 5 messages in the thread
Looking for additional code-review trailers on lore.kernel.org Analyzing 3 code-review messages
Will use the latest revision: v2
You can pick other revisions using the -vN flag
Checking attestation on all messages, may take a moment...
---
✗ [PATCH v2] power: supply: ds2760_battery: convert to devm-managed
workqueue and pm_notifier
+ Link:
https://patch.msgid.link/[email protected]
+ Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
✗ BADSIG: DKIM/gmail.com
---
Total patches: 1
---
Applying: power: supply: ds2760_battery: convert to devm-managed workqueue and pm_notifier
Patch failed at 0001 power: supply: ds2760_battery: convert to devm-managed workqueue and pm_notifier
error: patch failed: drivers/power/supply/ds2760_battery.c:695
error: drivers/power/supply/ds2760_battery.c: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To restore the original branch and stop patching, run "git am --abort".
hint: Disable this message with "git config set advice.mergeConflict false"

Getting only this with (even with -v1 argument):
Looking up [email protected] Checking for newer revisions
Grabbing search results from lore.kernel.org
Added from v2: 1 patches
Analyzing 5 messages in the thread
Looking for additional code-review trailers on lore.kernel.org Analyzing 3 code-review messages
Will use the latest revision: v2
You can pick other revisions using the -vN flag Specified msgid is not present in the series, cannot cherrypick

Something is messed with threading or message IDs of things you post. Also visible here:
https://lore.kernel.org/all/[email protected]/

Please send a v3.

Best regards,
Krzysztof