usb: am654: Add support for host mode to the USB port on overlay board
cover usb: am654: Add support for host mode to the USB port on overlay board
The following series of patches
- adds support for host mode to USB3SS0 controller
- adds aliases for USB subsystems
- adds a workaround to use USB0 in USB 2.0 only mode
Aswath Govindraju (3):
board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
dts: am654-base-board-uboot: Set USB0 dr_mode to host
dts: am654-base-board-uboot: Add aliases for USB subsystems
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 4 +++- board/ti/am65x/evm.c | 16 ++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.1
PATCH 1/3 board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
It has been observed that setting SERDES0 lane mux to USB prevents USB 2.0 operation on USB0. Setting SERDES0 lane mux to non-USB when USB0 is used in USB 2.0 only mode solves this issue. However, for USB3.0+2.0 operation this issue is not present.
Implement this workaround by writing 1 to LANE_FUNC_SEL field in CTRLMMR_SERDES0_CTRL register.
--- board/ti/am65x/evm.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
board/ti/am65x/evm.c +16 -0
@@ -38,6 +38,10 @@ enum {/* Max number of MAC addresses that are parsed/processed per daughter card */ #define DAUGHTER_CARD_NO_OF_MAC_ADDR 8 +/* Regiter that controls the SERDES0 lane and clock assignment */ +#define CTRLMMR_SERDES0_CTRL 0x00104080 +#define PCIE_LANE0 0x1 +DECLARE_GLOBAL_DATA_PTR ;int board_init (void )
@@ -312,6 +316,18 @@ static int probe_daughtercards(void) (uchar *)mac_addr[j]); } +/* +* It has been observed that setting SERDES0 lane mux to USB prevents USB +* 2.0 operation on USB0. Setting SERDES0 lane mux to non-USB when USB0 is +* used in USB 2.0 only mode solves this issue. For USB3.0+2.0 operation +* this issue is not present. +* +* Implement this workaround by writing 1 to LANE_FUNC_SEL field in +* CTRLMMR_SERDES0_CTRL register. +*/ +if (!strncmp (ep.name,"SER-PCIE2LEVM" ,sizeof (ep.name))) +writel (PCIE_LANE0 ,CTRLMMR_SERDES0_CTRL ); +/* Skip if no overlays are to be added */ if (!strlen (cards[i].dtbo_name))continue ;
Signature · 1 line
2.17.1
PATCH 2/3 dts: am654-base-board-uboot: Set USB0 dr_mode to host
In reply to Aswath GovindrajuUSB3SS0 controller is to be used as a host in U-boot. Fix it by changing the dr_mode to host.
--- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/k3-am654-base-board-u-boot.dtsi +1 -1
@@ -270,7 +270,7 @@ &usb0 { pinctrl-names = "default"; pinctrl-0 = <&usb0_pins_default>; - dr_mode = "peripheral"; + dr_mode = "host"; u-boot,dm-spl; };
Signature · 1 line
2.17.1
PATCH 2/3 dts: am654-base-board-uboot: Set USB0 dr_mode to host
Quoted 4 lines · Aswath Govindraju
USB3SS0 controller is to be used as a host in U-boot. Fix it by changing the
dr_modeto host.Signed-off-by Aswath Govindraju <[email protected]>
Won't it break dfu support or is it used in different controller?
Thanks and regards,
Lokesh
Quoted 18 lines
--- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/k3-am654-base-board-u-boot.dtsi +1
-1@@ -270,7 +270,7 @@ &usb0 { pinctrl-names = "default"; pinctrl-0 = <&usb0_pins_default>; - dr_mode = "peripheral"; + dr_mode = "host"; u-boot,dm-spl; };
PATCH 2/3 dts: am654-base-board-uboot: Set USB0 dr_mode to host
Quoted 10 lines · Lokesh Vutla
Quoted 4 lines · Aswath Govindraju
USB3SS0 controller is to be used as a host in U-boot. Fix it by changing the
dr_modeto host.Signed-off-by Aswath Govindraju <[email protected]>Won't it break dfu support or is it used in different controller?
It is used in a different controller. The port on the base board is used for dfu and and the port on the overlay board is used for host mode.
Thanks,
Aswath
Quoted 19 lines
Quoted 19 lines
--- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/k3-am654-base-board-u-boot.dtsi +1
-1@@ -270,7 +270,7 @@ &usb0 { pinctrl-names = "default"; pinctrl-0 = <&usb0_pins_default>; - dr_mode = "peripheral"; + dr_mode = "host"; u-boot,dm-spl; };
PATCH 3/3 dts: am654-base-board-uboot: Add aliases for USB subsystems
In reply to Aswath GovindrajuThe sequence number assigned for USB subsystem in a uclass is dependent on the order of occurrence in the device tree. If the dr_mode of USB3SS0 controller is varied then the sequence number of USB3SS1 controller also changes. If aliases are added then sequence numbers are assigned using the alias number. This makes the sequence number of USB3SS1 controller independent of USB3SS0 controller's dr_mode.
Therefore, add aliases to fix the sequence number assigned to the USB subsystems.
--- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/dts/k3-am654-base-board-u-boot.dtsi +2 -0
@@ -14,6 +14,8 @@ aliases { serial2 = &main_uart0; ethernet0 = &cpsw_port1; + usb0 = &usb0; + usb1 = &usb1; }; };
Signature · 1 line
2.17.1
cover usb: am654: Add support for host mode to the USB port on overlay board
In reply to Aswath GovindrajuHi,
Quoted 9 lines · Aswath Govindraju
The following series of patches
- adds support for host mode to USB3SS0 controller
- adds aliases for USB subsystems
- adds a workaround to use USB0 in USB 2.0 only modeAswath Govindraju (3):
board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
dts: am654-base-board-uboot: Set USB0dr_modeto host
dts: am654-base-board-uboot: Add aliases for USB subsystems
For all patches,
Quoted 5 lines
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 4 +++- board/ti/am65x/evm.c | 16 ++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-)
cheers,
-roger
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
cover usb: am654: Add support for host mode to the USB port on overlay board
In reply to Aswath GovindrajuQuoted 4 lines · Aswath Govindraju
The following series of patches
- adds support for host mode to USB3SS0 controller
- adds aliases for USB subsystems
- adds a workaround to use USB0 in USB 2.0 only mode
Fixed the dts patches subject to arm: dts: .... and applied to u-boot-ti for-next branch.
Thanks and regards,
Lokesh
Quoted 10 lines
Aswath Govindraju (3):
board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
dts: am654-base-board-uboot: Set USB0dr_modeto host
dts: am654-base-board-uboot: Add aliases for USB subsystemsarch/arm/dts/k3-am654-base-board-u-boot.dtsi | 4 +++- board/ti/am65x/evm.c | 16 ++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-)