Resource-managed blk_ksm_init()
Subsystems (4)
cover Resource-managed blk_ksm_init()
This patchset adds a resource-managed variant of blk_ksm_init() so that drivers don't have to worry about calling blk_ksm_destroy().
This was suggested during review of my patchset which adds eMMC inline encryption support
(https://lkml.kernel.org/linux-mmc/[email protected]/T/#u).
That patchset proposes a second caller of blk_ksm_init(). But it can instead use the resource-managed variant, as can the UFS driver.
My preference is that patch #1 be taken through the MMC tree together with my MMC patchset, so that we don't have to wait an extra cycle for the MMC changes. Patch #2 can then go in later.
Eric Biggers (2):
block/keyslot-manager: introduce devm_blk_ksm_init()
scsi: ufs: use devm_blk_ksm_init()
Documentation/block/inline-encryption.rst | 12 +++++----- block/keyslot-manager.c | 29 +++++++++++++++++++++++ drivers/scsi/ufs/ufshcd-crypto.c | 9 ++----- drivers/scsi/ufs/ufshcd-crypto.h | 5 ---- drivers/scsi/ufs/ufshcd.c | 1 - include/linux/keyslot-manager.h | 3 +++ 6 files changed, 40 insertions(+), 19 deletions(-)
Signature · 1 line
2.30.0
PATCH 1/2 block/keyslot-manager: introduce devm_blk_ksm_init()
From: Eric Biggers <[email protected]>
Add a resource-managed variant of blk_ksm_init() so that drivers don't have to worry about calling blk_ksm_destroy().
Note that the implementation uses a custom devres action to call blk_ksm_destroy() rather than switching the two allocations to be directly devres-managed, e.g. with devm_kmalloc(). This is because we need to keep zeroing the memory containing the keyslots when it is freed, and also because we want to continue using kvmalloc() (and there is no devm_kvmalloc()).
--- Documentation/block/inline-encryption.rst | 12 +++++----- block/keyslot-manager.c | 29 +++++++++++++++++++++++ include/linux/keyslot-manager.h | 3 +++ 3 files changed, 38 insertions(+), 6 deletions(-)
Documentation/block/inline-encryption.rst +6 -6
@@ -182,8 +182,9 @@ API presented to device drivers A :c:type:``struct blk_keyslot_manager`` should be set up by device drivers in the ``request_queue`` of the device. The device driver needs to call -``blk_ksm_init`` on the ``blk_keyslot_manager``, which specifying the number of -keyslots supported by the hardware. +``blk_ksm_init`` (or its resource-managed variant ``devm_blk_ksm_init``) on the +``blk_keyslot_manager``, while specifying the number of keyslots supported by +the hardware. The device driver also needs to tell the KSM how to actually manipulate the IE hardware in the device to do things like programming the crypto key into
@@ -202,10 +203,9 @@ needs each and every of its keyslots to be reprogrammed with the key it "should have" at the point in time when the function is called. This is useful e.g. if a device loses all its keys on runtime power down/up. -``blk_ksm_destroy`` should be called to free up all resources used by a keyslot -manager upon ``blk_ksm_init``, once the ``blk_keyslot_manager`` is no longer -needed. - +If the driver used ``blk_ksm_init`` instead of ``devm_blk_ksm_init``, then +``blk_ksm_destroy`` should be called to free up all resources used by a +``blk_keyslot_manager`` once it is no longer needed. Layered Devices ===============
block/keyslot-manager.c +29 -0
@@ -29,6 +29,7 @@#define pr_fmt (fmt) "blk-crypto: " fmt#include <linux/keyslot-manager.h> +#include <linux/device.h> #include <linux/atomic.h> #include <linux/mutex.h> #include <linux/pm_runtime.h>
@@ -127,6 +128,34 @@ int blk_ksm_init(struct blk_keyslot_manager *ksm, unsigned int num_slots) }EXPORT_SYMBOL_GPL (blk_ksm_init); +static void blk_ksm_destroy_callback (void *ksm) +{ +blk_ksm_destroy (ksm); +} + +/** +* devm_blk_ksm_init() - Resource-managed blk_ksm_init() +* @dev: The device which owns the blk_keyslot_manager. +* @ksm: The blk_keyslot_manager to initialize. +* @num_slots: The number of key slots to manage. +* +* Like blk_ksm_init(), but causes blk_ksm_destroy() to be called automatically +* on driver detach. +* +* Return: 0 on success, or else a negative error code. +*/ +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots) +{ +int err =blk_ksm_init (ksm, num_slots); + +if (err) +return err; + +return devm_add_action_or_reset (dev, blk_ksm_destroy_callback, ksm); +} +EXPORT_SYMBOL_GPL (devm_blk_ksm_init); +static inline struct hlist_head *blk_ksm_hash_bucket_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key)
include/linux/keyslot-manager.h +3 -0
@@ -85,6 +85,9 @@ struct blk_keyslot_manager {int blk_ksm_init (struct blk_keyslot_manager *ksm,unsigned int num_slots); +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots); +blk_status_t blk_ksm_get_slot_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key,struct blk_ksm_keyslot **slot_ptr);
Signature · 1 line
2.30.0
Re: [PATCH 1/2] block/keyslot-manager: introduce devm_blk_ksm_init()
Quoted 112 lines · Eric Biggers
From: Eric Biggers <[email protected]>
Add a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().Note that the implementation uses a custom devres action to call
blk_ksm_destroy()rather than switching the two allocations to be directly devres-managed, e.g. withdevm_kmalloc(). This is because we need to keep zeroing the memory containing the keyslots when it is freed, and also because we want to continue usingkvmalloc()(and there is nodevm_kvmalloc()).Signed-off-by Eric Biggers <[email protected]>--- Documentation/block/inline-encryption.rst | 12 +++++----- block/keyslot-manager.c | 29 +++++++++++++++++++++++ include/linux/keyslot-manager.h | 3 +++ 3 files changed, 38 insertions(+), 6 deletions(-)Documentation/block/inline-encryption.rst +6
-6@@ -182,8 +182,9 @@ API presented to device drivers A :c:type:``struct blk_keyslot_manager`` should be set up by device drivers in the ``request_queue`` of the device. The device driver needs to call -``blk_ksm_init`` on the ``blk_keyslot_manager``, which specifying the number of -keyslots supported by the hardware. +``blk_ksm_init`` (or its resource-managed variant ``devm_blk_ksm_init``) on the +``blk_keyslot_manager``, while specifying the number of keyslots supported by +the hardware. The device driver also needs to tell the KSM how to actually manipulate the IE hardware in the device to do things like programming the crypto key into@@ -202,10 +203,9 @@ needs each and every of its keyslots to be reprogrammed with the key it "should have" at the point in time when the function is called. This is useful e.g. if a device loses all its keys on runtime power down/up. -``blk_ksm_destroy`` should be called to free up all resources used by a keyslot -manager upon ``blk_ksm_init``, once the ``blk_keyslot_manager`` is no longer -needed. - +If the driver used ``blk_ksm_init`` instead of ``devm_blk_ksm_init``, then +``blk_ksm_destroy`` should be called to free up all resources used by a +``blk_keyslot_manager`` once it is no longer needed. Layered Devices ===============block/keyslot-manager.c +29
-0@@ -29,6 +29,7 @@#define pr_fmt (fmt) "blk-crypto: " fmt#include <linux/keyslot-manager.h> +#include <linux/device.h> #include <linux/atomic.h> #include <linux/mutex.h> #include <linux/pm_runtime.h> @@ -127,6 +128,34 @@ int blk_ksm_init(struct blk_keyslot_manager *ksm, unsigned int num_slots) }EXPORT_SYMBOL_GPL (blk_ksm_init); +static void blk_ksm_destroy_callback (void *ksm) +{ +blk_ksm_destroy (ksm); +} + +/** +* devm_blk_ksm_init() - Resource-managed blk_ksm_init() +* @dev: The device which owns the blk_keyslot_manager. +* @ksm: The blk_keyslot_manager to initialize. +* @num_slots: The number of key slots to manage. +* +* Like blk_ksm_init(), but causes blk_ksm_destroy() to be called automatically +* on driver detach. +* +* Return: 0 on success, or else a negative error code. +*/ +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots) +{ +int err =blk_ksm_init (ksm, num_slots); + +if (err) +return err; + +return devm_add_action_or_reset (dev, blk_ksm_destroy_callback, ksm); +} +EXPORT_SYMBOL_GPL (devm_blk_ksm_init); +static inline struct hlist_head *blk_ksm_hash_bucket_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key)include/linux/keyslot-manager.h +3
-1@@ -85,6 +85,9 @@ struct blk_keyslot_manager {int blk_ksm_init (struct blk_keyslot_manager *ksm,unsigned int num_slots); +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots); +blk_status_t blk_ksm_get_slot_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key,struct blk_ksm_keyslot **slot_ptr); --
Quoted 1 line
2.30.0
Looks good to me. Please feel free to add
Re: [PATCH 1/2] block/keyslot-manager: introduce devm_blk_ksm_init()
Quoted 15 lines · Satya Tangirala
Quoted 14 lines · Eric Biggers
From: Eric Biggers <[email protected]>
Add a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().Note that the implementation uses a custom devres action to call
blk_ksm_destroy()rather than switching the two allocations to be directly devres-managed, e.g. withdevm_kmalloc(). This is because we need to keep zeroing the memory containing the keyslots when it is freed, and also because we want to continue usingkvmalloc()(and there is nodevm_kvmalloc()).Signed-off-by Eric Biggers <[email protected]>
[..]
Quoted 17 lines
Quoted 5 lines
include/linux/keyslot-manager.h +0
-0include/linux/keyslot-manager.h struct blk_keyslot_manager {
Quoted 10 lines
include/linux/keyslot-manager.h +3
-1@@ -85,6 +85,9 @@ struct blk_keyslot_manager {int blk_ksm_init (struct blk_keyslot_manager *ksm,unsigned int num_slots); +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots); +blk_status_t blk_ksm_get_slot_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key,struct blk_ksm_keyslot **slot_ptr); --Looks good to me. Please feel free to add
Quoted 1 line
Reviewed-by Satya Tangirala <[email protected]>
Thanks Satya. Jens, any objection to this patch going in through the MMC tree?
- Eric
Jens Axboe
maintainerRe: [PATCH 1/2] block/keyslot-manager: introduce devm_blk_ksm_init()
Quoted 36 lines · Eric Biggers
Quoted 15 lines · Satya Tangirala
Quoted 14 lines · Eric Biggers
From: Eric Biggers <[email protected]>
Add a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().Note that the implementation uses a custom devres action to call
blk_ksm_destroy()rather than switching the two allocations to be directly devres-managed, e.g. withdevm_kmalloc(). This is because we need to keep zeroing the memory containing the keyslots when it is freed, and also because we want to continue usingkvmalloc()(and there is nodevm_kvmalloc()).Signed-off-by Eric Biggers <[email protected]>[..]
Quoted 17 lines
Quoted 5 lines
include/linux/keyslot-manager.h +0
-0include/linux/keyslot-manager.h struct blk_keyslot_manager {
Quoted 10 lines
include/linux/keyslot-manager.h +3
-1@@ -85,6 +85,9 @@ struct blk_keyslot_manager {int blk_ksm_init (struct blk_keyslot_manager *ksm,unsigned int num_slots); +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots); +blk_status_t blk_ksm_get_slot_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key,struct blk_ksm_keyslot **slot_ptr); --Looks good to me. Please feel free to add
Quoted 1 line
Reviewed-by Satya Tangirala <[email protected]>
Quoted 1 line
Thanks Satya. Jens, any objection to this patch going in through the MMC tree?
No objections from me, doesn't look like we have any real worries of conflicts.
Signature · 1 line
Jens Axboe
Ulf Hansson
AppliedRe: [PATCH 1/2] block/keyslot-manager: introduce devm_blk_ksm_init()
Quoted 38 lines · Jens Axboe
Quoted 36 lines · Eric Biggers
Quoted 15 lines · Satya Tangirala
Quoted 14 lines · Eric Biggers
From: Eric Biggers <[email protected]>
Add a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().Note that the implementation uses a custom devres action to call
blk_ksm_destroy()rather than switching the two allocations to be directly devres-managed, e.g. withdevm_kmalloc(). This is because we need to keep zeroing the memory containing the keyslots when it is freed, and also because we want to continue usingkvmalloc()(and there is nodevm_kvmalloc()).Signed-off-by Eric Biggers <[email protected]>[..]
Quoted 18 lines
Quoted 5 lines
include/linux/keyslot-manager.h +0
-0include/linux/keyslot-manager.h struct blk_keyslot_manager {
Quoted 10 lines
include/linux/keyslot-manager.h +3
-1@@ -85,6 +85,9 @@ struct blk_keyslot_manager {int blk_ksm_init (struct blk_keyslot_manager *ksm,unsigned int num_slots); +int devm_blk_ksm_init (struct device *dev,struct blk_keyslot_manager *ksm, +unsigned int num_slots); +blk_status_t blk_ksm_get_slot_for_key (struct blk_keyslot_manager *ksm,const struct blk_crypto_key *key,struct blk_ksm_keyslot **slot_ptr); --Looks good to me. Please feel free to add
Reviewed-by Satya Tangirala <[email protected]>
Quoted 4 lines
Quoted 1 line
Thanks Satya. Jens, any objection to this patch going in through the MMC tree?
No objections from me, doesn't look like we have any real worries of conflicts.
Applied to my mmc for the next branch, by adding Jens' ack. Thanks everybody!
Kind regards
Uffe
PATCH 2/2 scsi: ufs: use devm_blk_ksm_init()
In reply to Eric BiggersFrom: Eric Biggers <[email protected]>
Use the new resource-managed variant of blk_ksm_init() so that the UFS driver doesn't have to manually call blk_ksm_destroy().
--- drivers/scsi/ufs/ufshcd-crypto.c | 9 ++------- drivers/scsi/ufs/ufshcd-crypto.h | 5 ----- drivers/scsi/ufs/ufshcd.c | 1 - 3 files changed, 2 insertions(+), 13 deletions(-)
drivers/scsi/ufs/ufshcd-crypto.c +2 -7
@@ -179,8 +179,8 @@ int ufshcd_hba_init_crypto_capabilities(struct ufs_hba *hba) }/* The actual number of configurations supported is (CFGC+1) */ - err =blk_ksm_init (&hba->ksm, - hba->crypto_capabilities.config_count +1 ); + err =devm_blk_ksm_init (hba->dev, &hba->ksm, + hba->crypto_capabilities.config_count +1 );if (err) goto out_free_caps;
@@ -238,8 +238,3 @@ void ufshcd_crypto_setup_rq_keyslot_manager(struct ufs_hba *hba,if (hba->caps &UFSHCD_CAP_CRYPTO )blk_ksm_register (&hba->ksm, q); } - -void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba) -{ -blk_ksm_destroy (&hba->ksm); -}
drivers/scsi/ufs/ufshcd-crypto.h +0 -5
@@ -43,8 +43,6 @@ void ufshcd_init_crypto(struct ufs_hba *hba);void ufshcd_crypto_setup_rq_keyslot_manager (struct ufs_hba *hba,struct request_queue *q); -void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba); -#else /* CONFIG_SCSI_UFS_CRYPTO */ static inline void ufshcd_prepare_lrbp_crypto(struct request *rq,
@@ -69,9 +67,6 @@ static inline void ufshcd_init_crypto(struct ufs_hba *hba) { }static inline void ufshcd_crypto_setup_rq_keyslot_manager (struct ufs_hba *hba,struct request_queue *q) { } -static inline void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba) -{ } -#endif /* CONFIG_SCSI_UFS_CRYPTO */ #endif /* _UFSHCD_CRYPTO_H */
drivers/scsi/ufs/ufshcd.c +0 -1
@@ -9139,7 +9139,6 @@ EXPORT_SYMBOL_GPL(ufshcd_remove);*/ void ufshcd_dealloc_host (struct ufs_hba *hba) { -ufshcd_crypto_destroy_keyslot_manager (hba);scsi_host_put (hba->host); }EXPORT_SYMBOL_GPL (ufshcd_dealloc_host);
Signature · 1 line
2.30.0
Re: [PATCH 2/2] scsi: ufs: use devm_blk_ksm_init()
Quoted 73 lines · Eric Biggers
From: Eric Biggers <[email protected]>
Use the new resource-managed variant of
blk_ksm_init()so that the UFS driver doesn't have to manually callblk_ksm_destroy().Signed-off-by Eric Biggers <[email protected]>--- drivers/scsi/ufs/ufshcd-crypto.c | 9 ++------- drivers/scsi/ufs/ufshcd-crypto.h | 5 ----- drivers/scsi/ufs/ufshcd.c | 1 - 3 files changed, 2 insertions(+), 13 deletions(-)drivers/scsi/ufs/ufshcd-crypto.c +2
-7@@ -179,8 +179,8 @@ int ufshcd_hba_init_crypto_capabilities(struct ufs_hba *hba) }/* The actual number of configurations supported is (CFGC+1) */ - err =blk_ksm_init (&hba->ksm, - hba->crypto_capabilities.config_count +1 ); + err =devm_blk_ksm_init (hba->dev, &hba->ksm, + hba->crypto_capabilities.config_count +1 );if (err) goto out_free_caps;@@ -238,8 +238,3 @@ void ufshcd_crypto_setup_rq_keyslot_manager(struct ufs_hba *hba,if (hba->caps &UFSHCD_CAP_CRYPTO )blk_ksm_register (&hba->ksm, q); } - -void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba) -{ -blk_ksm_destroy (&hba->ksm); -}drivers/scsi/ufs/ufshcd-crypto.h +0
-5@@ -43,8 +43,6 @@ void ufshcd_init_crypto(struct ufs_hba *hba);void ufshcd_crypto_setup_rq_keyslot_manager (struct ufs_hba *hba,struct request_queue *q); -void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba); -#else /* CONFIG_SCSI_UFS_CRYPTO */ static inline void ufshcd_prepare_lrbp_crypto(struct request *rq,@@ -69,9 +67,6 @@ static inline void ufshcd_init_crypto(struct ufs_hba *hba) { }static inline void ufshcd_crypto_setup_rq_keyslot_manager (struct ufs_hba *hba,struct request_queue *q) { } -static inline void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba) -{ } -#endif /* CONFIG_SCSI_UFS_CRYPTO */ #endif /* _UFSHCD_CRYPTO_H */ drivers/scsi/ufs/ufshcd.c +0
-2@@ -9139,7 +9139,6 @@ EXPORT_SYMBOL_GPL(ufshcd_remove);*/ void ufshcd_dealloc_host (struct ufs_hba *hba) { -ufshcd_crypto_destroy_keyslot_manager (hba);scsi_host_put (hba->host); }EXPORT_SYMBOL_GPL (ufshcd_dealloc_host); --
Quoted 2 lines
2.30.0
Looks good to me. Please feel free to add
Re: [PATCH 2/2] scsi: ufs: use devm_blk_ksm_init()
In reply to Eric Biggers+ Martin, James
Quoted 7 lines · Eric Biggers
From: Eric Biggers <[email protected]>
Use the new resource-managed variant of
blk_ksm_init()so that the UFS driver doesn't have to manually callblk_ksm_destroy().Signed-off-by Eric Biggers <[email protected]>
I took the liberty of applying this one to my mmc tree along with patch1, as it looks trivial to me.
Martin/James - if you have objections or want to ack it, please tell me.
Thanks and kind regards
Uffe
Quoted 68 lines
--- drivers/scsi/ufs/ufshcd-crypto.c | 9 ++------- drivers/scsi/ufs/ufshcd-crypto.h | 5 ----- drivers/scsi/ufs/ufshcd.c | 1 - 3 files changed, 2 insertions(+), 13 deletions(-)drivers/scsi/ufs/ufshcd-crypto.c +2
-7@@ -179,8 +179,8 @@ int ufshcd_hba_init_crypto_capabilities(struct ufs_hba *hba) }/* The actual number of configurations supported is (CFGC+1) */ - err =blk_ksm_init (&hba->ksm, - hba->crypto_capabilities.config_count +1 ); + err =devm_blk_ksm_init (hba->dev, &hba->ksm, + hba->crypto_capabilities.config_count +1 );if (err) goto out_free_caps;@@ -238,8 +238,3 @@ void ufshcd_crypto_setup_rq_keyslot_manager(struct ufs_hba *hba,if (hba->caps &UFSHCD_CAP_CRYPTO )blk_ksm_register (&hba->ksm, q); } - -void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba) -{ -blk_ksm_destroy (&hba->ksm); -}drivers/scsi/ufs/ufshcd-crypto.h +0
-5@@ -43,8 +43,6 @@ void ufshcd_init_crypto(struct ufs_hba *hba);void ufshcd_crypto_setup_rq_keyslot_manager (struct ufs_hba *hba,struct request_queue *q); -void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba); -#else /* CONFIG_SCSI_UFS_CRYPTO */ static inline void ufshcd_prepare_lrbp_crypto(struct request *rq,@@ -69,9 +67,6 @@ static inline void ufshcd_init_crypto(struct ufs_hba *hba) { }static inline void ufshcd_crypto_setup_rq_keyslot_manager (struct ufs_hba *hba,struct request_queue *q) { } -static inline void ufshcd_crypto_destroy_keyslot_manager (struct ufs_hba *hba) -{ } -#endif /* CONFIG_SCSI_UFS_CRYPTO */ #endif /* _UFSHCD_CRYPTO_H */ drivers/scsi/ufs/ufshcd.c +0
-2@@ -9139,7 +9139,6 @@ EXPORT_SYMBOL_GPL(ufshcd_remove);*/ void ufshcd_dealloc_host (struct ufs_hba *hba) { -ufshcd_crypto_destroy_keyslot_manager (hba);scsi_host_put (hba->host); }EXPORT_SYMBOL_GPL (ufshcd_dealloc_host); --2.30.0
Re: [PATCH 2/2] scsi: ufs: use devm_blk_ksm_init()
Ulf,
Quoted 5 lines
I took the liberty of applying this one to my mmc tree along with patch1, as it looks trivial to me.
Martin/James - if you have objections or want to ack it, please tell me.
That's fine. Just a heads-up that there has been a lot of churn in UFS in this cycle so there may be some merge fuzz.
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
+ Jens, Martin, James
Quoted 10 lines · Eric Biggers
This patchset adds a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().This was suggested during review of my patchset which adds eMMC inline encryption support
(https://lkml.kernel.org/linux-mmc/[email protected]/T/#u).
That patchset proposes a second caller ofblk_ksm_init(). But it can instead use the resource-managed variant, as can the UFS driver.
Quoted 3 lines
My preference is that patch #1 be taken through the MMC tree together with my MMC patchset, so that we don't have to wait an extra cycle for the MMC changes. Patch #2 can then go in later.
Sure, I can pick patch #1 through my mmc tree, but need an ack from Jens to do it. Or whatever he prefers.
Another solution is to host immutable branches (if needed), so they can be shared between our tree's, that works for me as well.
Quoted 13 lines
Eric Biggers (2):
block/keyslot-manager: introducedevm_blk_ksm_init()
scsi: ufs: usedevm_blk_ksm_init()Documentation/block/inline-encryption.rst | 12 +++++----- block/keyslot-manager.c | 29 +++++++++++++++++++++++ drivers/scsi/ufs/ufshcd-crypto.c | 9 ++----- drivers/scsi/ufs/ufshcd-crypto.h | 5 ---- drivers/scsi/ufs/ufshcd.c | 1 - include/linux/keyslot-manager.h | 3 +++ 6 files changed, 40 insertions(+), 19 deletions(-)
Quoted 3 lines
--
2.30.0
Kind regards
Uffe
Jens Axboe
maintainerQuoted 14 lines · Ulf Hansson
+ Jens, Martin, James
Quoted 10 lines · Eric Biggers
This patchset adds a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().This was suggested during review of my patchset which adds eMMC inline encryption support
(https://lkml.kernel.org/linux-mmc/[email protected]/T/#u).
That patchset proposes a second caller ofblk_ksm_init(). But it can instead use the resource-managed variant, as can the UFS driver.
Quoted 6 lines
Quoted 3 lines
My preference is that patch #1 be taken through the MMC tree together with my MMC patchset, so that we don't have to wait an extra cycle for the MMC changes. Patch #2 can then go in later.
Sure, I can pick patch #1 through my mmc tree, but need an ack from Jens to do it. Or whatever he prefers.
Or we can take it through the block tree, usually the easiest as it's the most likely source of potential conflicts. And that's true for both of them, as long as the SCSI side signs off on patch 2/2.
Signature · 1 line
Jens Axboe
Quoted 19 lines · Jens Axboe
Quoted 18 lines · Ulf Hansson
+ Jens, Martin, James
Quoted 13 lines · Eric Biggers
This patchset adds a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().This was suggested during review of my patchset which adds eMMC inline encryption support
(https://lkml.kernel.org/linux-mmc/[email protected]/T/#u).
That patchset proposes a second caller ofblk_ksm_init(). But it can instead use the resource-managed variant, as can the UFS driver.My preference is that patch #1 be taken through the MMC tree together with my MMC patchset, so that we don't have to wait an extra cycle for the MMC changes. Patch #2 can then go in later.
Quoted 7 lines
Quoted 2 lines
Sure, I can pick patch #1 through my mmc tree, but need an ack from Jens to do it. Or whatever he prefers.
Or we can take it through the block tree, usually the easiest as it's the most likely source of potential conflicts. And that's true for both of them, as long as the SCSI side signs off on patch 2/2.
As I mentioned, the issue is that my patchset to add eMMC inline encryption support (https://lkml.kernel.org/r/[email protected])
depends on devm_blk_ksm_init(), as it was requested during review.
So if devm_blk_ksm_init() goes in through the block tree, Ulf won't be able to take the eMMC patchset for 5.12.
- Eric
Jens Axboe
maintainerQuoted 28 lines · Eric Biggers
Quoted 19 lines · Jens Axboe
Quoted 18 lines · Ulf Hansson
+ Jens, Martin, James
Quoted 13 lines · Eric Biggers
This patchset adds a resource-managed variant of
blk_ksm_init()so that drivers don't have to worry about callingblk_ksm_destroy().This was suggested during review of my patchset which adds eMMC inline encryption support
(https://lkml.kernel.org/linux-mmc/[email protected]/T/#u).
That patchset proposes a second caller ofblk_ksm_init(). But it can instead use the resource-managed variant, as can the UFS driver.My preference is that patch #1 be taken through the MMC tree together with my MMC patchset, so that we don't have to wait an extra cycle for the MMC changes. Patch #2 can then go in later.
Quoted 7 lines
Quoted 2 lines
Sure, I can pick patch #1 through my mmc tree, but need an ack from Jens to do it. Or whatever he prefers.
Or we can take it through the block tree, usually the easiest as it's the most likely source of potential conflicts. And that's true for both of them, as long as the SCSI side signs off on patch 2/2.
Quoted 6 lines
As I mentioned, the issue is that my patchset to add eMMC inline encryption support (https://lkml.kernel.org/r/[email protected])
depends ondevm_blk_ksm_init(), as it was requested during review.So if
devm_blk_ksm_init()goes in through the block tree, Ulf won't be able to take the eMMC patchset for 5.12.
Well he could, such cross tree dependencies are not hard to solve. But as mentioned in the other email, for this one, just queued it up yourself. You can add my acked-by to it.
Signature · 1 line
Jens Axboe