r8169: Load MAC address from device tree if present
PATCH v2 1/2 r8169: Load MAC address from device tree if present
From: Thierry Reding <[email protected]>
If the system was booted using a device tree and if the device tree contains a MAC address, use it instead of reading one from the EEPROM. This is useful in situations where the EEPROM isn't properly programmed or where the firmware wants to override the existing MAC address.
---
Applies to net-next.
Changes in v2:
- rewrite error check for readability
- initialize mac_addr array
drivers/net/ethernet/realtek/r8169.c | 36 ++++++++++++++++++---------- 1 file changed, 23 insertions(+), 13 deletions(-)
drivers/net/ethernet/realtek/r8169.c +23 -13
@@ -7110,6 +7110,21 @@ static int rtl_alloc_irq(struct rtl8169_private *tp)return pci_alloc_irq_vectors (tp->pci_dev,1 ,1 , flags); } +static void rtl_read_mac_address (struct rtl8169_private *tp, +u8 mac_addr[ETH_ALEN ]) +{ +/* Get MAC address */ +switch (tp->mac_version) { + case RTL_GIGA_MAC_VER_35 ... RTL_GIGA_MAC_VER_38: + case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51: + *(u32 *)&mac_addr[0 ] =rtl_eri_read (tp,0xe0 ,ERIAR_EXGMAC ); + *(u16 *)&mac_addr[4 ] =rtl_eri_read (tp,0xe4 ,ERIAR_EXGMAC ); +break ; +default : +break ; + } +} +DECLARE_RTL_COND (rtl_link_list_ready_cond) {return RTL_R8 (tp,MCU ) &LINK_LIST_RDY ;
@@ -7301,6 +7316,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; +u8 mac_addr[ETH_ALEN ]__aligned(4) = {};struct rtl8169_private *tp;struct net_device *dev;int chipset, region, i;
@@ -7403,20 +7419,14 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)u64_stats_init (&tp->rx_stats.syncp);u64_stats_init (&tp->tx_stats.syncp); -/* Get MAC address */ -switch (tp->mac_version) { -u8 mac_addr[ETH_ALEN ]__aligned(4) ; - case RTL_GIGA_MAC_VER_35 ... RTL_GIGA_MAC_VER_38: - case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51: - *(u32 *)&mac_addr[0 ] =rtl_eri_read (tp,0xe0 ,ERIAR_EXGMAC ); - *(u16 *)&mac_addr[4 ] =rtl_eri_read (tp,0xe4 ,ERIAR_EXGMAC ); +/* get MAC address */ + rc =eth_platform_get_mac_address (&pdev->dev, mac_addr); +if (rc) +rtl_read_mac_address (tp, mac_addr); + +if (is_valid_ether_addr (mac_addr)) +rtl_rar_set (tp, mac_addr); -if (is_valid_ether_addr (mac_addr)) -rtl_rar_set (tp, mac_addr); -break ; -default : -break ; - }for (i =0 ; i <ETH_ALEN ; i++) dev->dev_addr[i] =RTL_R8 (tp,MAC0 + i);
Signature · 1 line
2.19.1
PATCH v2 2/2 r8169: Avoid pointer aliasing
From: Thierry Reding <[email protected]>
Read MAC address 32-bit at a time and manually extract the individual bytes. This avoids pointer aliasing and gives the compiler a better chance of optimizing the operation.
---
Applies to net-next.
I tested this on a Jetson TX2 with an add-in Realtek ethernet card that has a properly programmed OTP to verify that I got the endianess right. Seems like everything works and the device behaves the same with or without this patch.
drivers/net/ethernet/realtek/r8169.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/net/ethernet/realtek/r8169.c +12 -3
@@ -7113,12 +7113,21 @@ static int rtl_alloc_irq(struct rtl8169_private *tp)static void rtl_read_mac_address (struct rtl8169_private *tp,u8 mac_addr[ETH_ALEN ]) { +u32 value; +/* Get MAC address */ switch (tp->mac_version) { case RTL_GIGA_MAC_VER_35 ... RTL_GIGA_MAC_VER_38: case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51: - *(u32 *)&mac_addr[0 ] =rtl_eri_read (tp,0xe0 ,ERIAR_EXGMAC ); - *(u16 *)&mac_addr[4 ] =rtl_eri_read (tp,0xe4 ,ERIAR_EXGMAC ); + value =rtl_eri_read (tp,0xe0 ,ERIAR_EXGMAC ); + mac_addr[0 ] = (value >>0 ) &0xff ; + mac_addr[1 ] = (value >>8 ) &0xff ; + mac_addr[2 ] = (value >>16 ) &0xff ; + mac_addr[3 ] = (value >>24 ) &0xff ; + + value =rtl_eri_read (tp,0xe4 ,ERIAR_EXGMAC ); + mac_addr[4 ] = (value >>0 ) &0xff ; + mac_addr[5 ] = (value >>8 ) &0xff ;break ;default :break ;
@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;struct net_device *dev;int chipset, region, i;
Signature · 1 line
2.19.1
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
Quoted 8 lines · Thierry Reding
From: Thierry Reding <[email protected]>
Read MAC address 32-bit at a time and manually extract the individual bytes. This avoids pointer aliasing and gives the compiler a better chance of optimizing the operation.
Suggested-by Andrew Lunn <[email protected]>Signed-off-by Thierry Reding <[email protected]>
Andrew
Heiner Kallweit
maintainerRe: [PATCH v2 2/2] r8169: Avoid pointer aliasing
In reply to Thierry RedingQuoted 49 lines · Thierry Reding
From: Thierry Reding <[email protected]>
Read MAC address 32-bit at a time and manually extract the individual bytes. This avoids pointer aliasing and gives the compiler a better chance of optimizing the operation.
Suggested-by Andrew Lunn <[email protected]>Signed-off-by Thierry Reding <[email protected]>---
Applies to net-next.I tested this on a Jetson TX2 with an add-in Realtek ethernet card that has a properly programmed OTP to verify that I got the endianess right. Seems like everything works and the device behaves the same with or without this patch.
drivers/net/ethernet/realtek/r8169.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)drivers/net/ethernet/realtek/r8169.c +11
-2@@ -7113,12 +7113,21 @@ static int rtl_alloc_irq(struct rtl8169_private *tp)static void rtl_read_mac_address (struct rtl8169_private *tp,u8 mac_addr[ETH_ALEN ]) { +u32 value; +/* Get MAC address */ switch (tp->mac_version) { case RTL_GIGA_MAC_VER_35 ... RTL_GIGA_MAC_VER_38: case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51: - *(u32 *)&mac_addr[0 ] =rtl_eri_read (tp,0xe0 ,ERIAR_EXGMAC ); - *(u16 *)&mac_addr[4 ] =rtl_eri_read (tp,0xe4 ,ERIAR_EXGMAC ); + value =rtl_eri_read (tp,0xe0 ,ERIAR_EXGMAC ); + mac_addr[0 ] = (value >>0 ) &0xff ; + mac_addr[1 ] = (value >>8 ) &0xff ; + mac_addr[2 ] = (value >>16 ) &0xff ; + mac_addr[3 ] = (value >>24 ) &0xff ; + + value =rtl_eri_read (tp,0xe4 ,ERIAR_EXGMAC ); + mac_addr[4 ] = (value >>0 ) &0xff ; + mac_addr[5 ] = (value >>8 ) &0xff ;break ;default :break ;
drivers/net/ethernet/realtek/r8169.c static int rtl_get_ether_clk(struct rtl8169_private *tp) · line 7331
Quoted 8 lines
drivers/net/ethernet/realtek/r8169.c +1
-1@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;struct net_device *dev;int chipset, region, i;
I just have one concern / question:
After this there's a call to is_valid_ether_addr(mac_addr) and kernel-doc of is_valid_ether_addr() states that argument must be u16-aligned. AFAIK that's not guaranteed for a byte array.
Heiner
David Miller
maintainerRe: [PATCH v2 2/2] r8169: Avoid pointer aliasing
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Date: Mon, 4 Feb 2019 17:42:13 +0100
drivers/net/ethernet/realtek/r8169.c static int rtl_get_ether_clk(struct rtl8169_private *tp) · line 7329
Quoted 7 lines
drivers/net/ethernet/realtek/r8169.c +1
-1@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;
I agree with Heiner, you have to provide at least 2 byte alignment for this buffer due to the reasons he stated.
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
Quoted 13 lines · David Miller
From: Thierry Reding <[email protected]>
Date: Mon, 4 Feb 2019 17:42:13 +0100drivers/net/ethernet/realtek/r8169.c static int rtl_get_ether_clk(struct rtl8169_private *tp) · line 7329
Quoted 7 lines
drivers/net/ethernet/realtek/r8169.c +1
-1@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;I agree with Heiner, you have to provide at least 2 byte alignment for this buffer due to the reasons he stated.
It's declared after a pointer so it is already is 2 byte aligned.
A lot of drivers wouldn't work otherwise.
David Miller
maintainerRe: [PATCH v2 2/2] r8169: Avoid pointer aliasing
From: Joe Perches <[email protected]>
Date: Tue, 05 Feb 2019 10:42:54 -0800
Quoted 15 lines · David Miller
Quoted 13 lines
From: Thierry Reding <[email protected]>
Date: Mon, 4 Feb 2019 17:42:13 +0100drivers/net/ethernet/realtek/r8169.c static int rtl_get_ether_clk(struct rtl8169_private *tp) · line 7329
Quoted 7 lines
drivers/net/ethernet/realtek/r8169.c +1
-1@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;I agree with Heiner, you have to provide at least 2 byte alignment for this buffer due to the reasons he stated.
Quoted 3 lines
It's declared after a pointer so it is already is 2 byte aligned.
A lot of drivers wouldn't work otherwise.
That's assuming a lot about what the compiler will do when it allocates local variables to the stack.
I want it _explicit_.
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
Quoted 18 lines · David Miller
From: Joe Perches <[email protected]>
Date: Tue, 05 Feb 2019 10:42:54 -0800Quoted 15 lines · David Miller
Quoted 13 lines
From: Thierry Reding <[email protected]>
Date: Mon, 4 Feb 2019 17:42:13 +0100drivers/net/ethernet/realtek/r8169.c static int rtl_get_ether_clk(struct rtl8169_private *tp) · line 7329
Quoted 7 lines
drivers/net/ethernet/realtek/r8169.c +1
-1@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;I agree with Heiner, you have to provide at least 2 byte alignment for this buffer due to the reasons he stated.
Quoted 6 lines
Quoted 3 lines
It's declared after a pointer so it is already is 2 byte aligned.
A lot of drivers wouldn't work otherwise.
That's assuming a lot about what the compiler will do when nit allocates local variables to the stack.
It's also assuming what a compiler will do when it defines a struct.
Quoted 1 line
I want it _explicit_.
Your choice, but there are a _lot_ of existing uses and I think requiring it is as senseless as requiring void * arithmetic to be cast to char * as gcc and clang already do not add padding after a pointer.
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
Quoted 21 lines · Joe Perches
Quoted 20 lines · David Miller
From: Joe Perches <[email protected]>
Date: Tue, 05 Feb 2019 10:42:54 -0800Quoted 17 lines · David Miller
Quoted 13 lines
From: Thierry Reding <[email protected]>
Date: Mon, 4 Feb 2019 17:42:13 +0100drivers/net/ethernet/realtek/r8169.c static int rtl_get_ether_clk(struct rtl8169_private *tp) · line 7329
Quoted 7 lines
drivers/net/ethernet/realtek/r8169.c +1
-1@@ -7316,7 +7325,7 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)static int rtl_init_one (struct pci_dev *pdev,const struct pci_device_id *ent) {const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; -u8 mac_addr[ETH_ALEN ]__aligned(4) = {}; +u8 mac_addr[ETH_ALEN ] = {};struct rtl8169_private *tp;I agree with Heiner, you have to provide at least 2 byte alignment for this buffer due to the reasons he stated.
It's declared after a pointer so it is already is 2 byte aligned.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
A lot of drivers wouldn't work otherwise.
That's assuming a lot about what the compiler will do when nit allocates local variables to the stack.
It's also assuming what a compiler will do when
it defines a struct.
This is not a structure member, it's a local variable. I'm not aware of any C norm requirement for ordering of local variables on the stack. After all, some of them might not be on the stack at all and use only registers or be optimized out completely.
Michal Kubecek
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
In reply to Joe PerchesQuoted 4 lines · Joe Perches
It's declared after a pointer so it is already is 2 byte aligned.
A lot of drivers wouldn't work otherwise.
Maybe these drivers are only used on arches where this does not matter.
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
Quoted 7 lines · Eric Dumazet
Quoted 3 lines · Joe Perches
It's declared after a pointer so it is already is 2 byte aligned.
A lot of drivers wouldn't work otherwise.
Maybe these drivers are only used on arches where this does not matter.
Possible.
I had only grepped through the sources looking for declarations using:
$ git grep -B1 '\[ETH_ALEN\];' -- '*.c' | grep -A1 '\*'
It's quite a few files in net/ too btw.
I still think adding __align(<even#>) is unnecessary here unless it follows something like a bool or a u8.
Re: [PATCH v2 2/2] r8169: Avoid pointer aliasing
Quoted 2 lines · Joe Perches
I still think adding
__align(<even#>)is unnecessary here unless it follows something like a bool or a u8.
This would be some historical side effect, and we do not want to rely on that.
A security feature could in fact ask a compiler to perform random shuffling of automatic variables.
( a la __randomize_layout )
Heiner Kallweit
maintainerRe: [PATCH v2 2/2] r8169: Avoid pointer aliasing
In reply to Joe PerchesQuoted 14 lines · Joe Perches
Quoted 7 lines · Eric Dumazet
Quoted 3 lines · Joe Perches
It's declared after a pointer so it is already is 2 byte aligned.
A lot of drivers wouldn't work otherwise.
Maybe these drivers are only used on arches where this does not matter.
Possible.
I had only grepped through the sources looking for declarations using:
Quoted 8 lines
$ git grep -B1 '\[ETH_ALEN\];' -- '*.c' | grep -A1 '\*'It's quite a few files in
net/too btw.I still think adding
__align(<even#>)is unnecessary here unless it follows something like a bool or a u8.
I there's such a controversy, then it may be better to stay with the current code, or?
Quoted 8 lines · Thierry Reding
From: Thierry Reding <[email protected]>
If the system was booted using a device tree and if the device tree contains a MAC address, use it instead of reading one from the EEPROM. This is useful in situations where the EEPROM isn't properly programmed or where the firmware wants to override the existing MAC address.
Signed-off-by Thierry Reding <[email protected]>