Skip to contentSkip to conversation

net: dwc_eth_qos: add support of device tree configuration for reset delay

PATCH Superseded Patrick Delaunay 2 participants 16 messages Apr 26, 2021 – Jul 20, 2021 Network drivers

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover net: dwc_eth_qos: add support of device tree configuration for reset delay

It is the V2 version of [1] after Marek remarks: all commit are new.

I change the DWC_ETH_QOS STM32 variant by using generic eth phy driver.

This driver is updated to use the gpio reset and assert/deassert delay from DT with the generic binding defined in linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml
or in U-Boot: doc/device-tree-bindings/net/phy.txt

[1] net: dwc_eth_qos: add support of device tree configuration for reset delay

    http://patchwork.ozlabs.org/project/uboot/list/?series=238253&state=*

Changes in v2:
- Update eth-phy driver (NEW)
- use log macro in eth-phy driver (NEW)
- update eth-phy driver to support STM32 binding with a mdio0 subnode (NEW)
- remove unused element in the struct eqos_priv (NEW)
- use generic ethernet phy for stm32 variant, this patch is a REWORK of previous serie: the device parsing is done in eth-phy driver and the gpio support is removed in stm32 variant: eqos_start/stop_resets_stm32 and eqos_probe_resources_stm32.
- cleanup ops by adding a common null ops (NEW)

Patrick Delaunay (6):
net: eth-phy: add support of device tree configuration for gpio reset
net: eth-phy: use dev_dbg and log_notice
net: eth-phy: manage subnode mdio0
net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv
net: dwc_eth_qos: use generic ethernet phy for stm32 variant
net: dwc: add a common empty ops eqos_null_ops

 drivers/net/Kconfig          |   1 +
 drivers/net/dwc_eth_qos.c    | 152 +++++------------------------------
 drivers/net/eth-phy-uclass.c |  78 +++++++++++++++---
 3 files changed, 91 insertions(+), 140 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/6 net: eth-phy: add support of device tree configuration for gpio reset

The gpio reset and the assert or deassert delay are defined in generic binding of the ethernet phy in Linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml

reset-gpios:
maxItems: 1
description:
The GPIO phandle and specifier for the PHY reset signal.

reset-assert-us:
description:
Delay after the reset was asserted in microseconds. If this property is missing the delay will be skipped.

reset-deassert-us:
description:
Delay after the reset was deasserted in microseconds. If this property is missing the delay will be skipped.

See also U-Boot: doc/device-tree-bindings/net/phy.txt

This patch adds the parsing of this common DT properties in the u-class "eth_phy_generic", used by default in the associated driver "eth_phy_generic_drv"

This parsing function eth_phy_of_to_plat can be reused by other ethernet phy drivers for this uclass UCLASS_ETH_PHY.

---

Changes in v2:
- Update eth-phy driver (NEW)

 drivers/net/eth-phy-uclass.c | 50 ++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
drivers/net/eth-phy-uclass.c +50 -0
index 07aebd935e..153f6909eb 100644
@@ -6,12 +6,17 @@
 #include <common.h>
 #include <dm.h>
 #include <net.h>
+#include <asm-generic/gpio.h>
 #include <dm/device-internal.h>
 #include <dm/uclass-internal.h>
 #include <dm/lists.h>
+#include <linux/delay.h>
 
 struct eth_phy_device_priv {
 	struct mii_dev *mdio_bus;
+	struct gpio_desc reset_gpio;
+	u32 reset_assert_delay;
+	u32 reset_deassert_delay;
 };
 
 int eth_phy_binds_nodes(struct udevice *eth_dev)
@@ -110,13 +115,58 @@ int eth_phy_get_addr(struct udevice *dev)
 	return reg;
 }
 
+/* parsing generic properties of devicetree/bindings/net/ethernet-phy.yaml */
+static int eth_phy_of_to_plat(struct udevice *dev)
+{
+	struct eth_phy_device_priv *uc_priv = dev_get_uclass_priv(dev);
+	int ret;
+
+	/* search "reset-gpios" in phy node */
+	ret = gpio_request_by_name(dev, "reset-gpios", 0,
+				   &uc_priv->reset_gpio,
+				   GPIOD_IS_OUT);
+	if (ret != -ENOENT)
+		return ret;
+
+	uc_priv->reset_assert_delay = dev_read_u32_default(dev, "reset-assert-us", 0);
+	uc_priv->reset_deassert_delay = dev_read_u32_default(dev, "reset-deassert-us", 0);
+
+	return 0;
+}
+
+void eth_phy_reset(struct udevice *dev, int value)
+{
+	struct eth_phy_device_priv *uc_priv = dev_get_uclass_priv(dev);
+	u32 delay;
+
+	if (!dm_gpio_is_valid(&uc_priv->reset_gpio))
+		return;
+
+	dm_gpio_set_value(&uc_priv->reset_gpio, value);
+
+	delay = value ? uc_priv->reset_assert_delay : uc_priv->reset_deassert_delay;
+	if (delay)
+		udelay(delay);
+}
+
+static int eth_phy_pre_probe(struct udevice *dev)
+{
+	/* Assert and deassert the reset signal */
+	eth_phy_reset(dev, 1);
+	eth_phy_reset(dev, 0);
+
+	return 0;
+}
+
 UCLASS_DRIVER(eth_phy_generic) = {
 	.id		= UCLASS_ETH_PHY,
 	.name		= "eth_phy_generic",
 	.per_device_auto	= sizeof(struct eth_phy_device_priv),
+	.pre_probe	= eth_phy_pre_probe,
 };
 
 U_BOOT_DRIVER(eth_phy_generic_drv) = {
 	.name		= "eth_phy_generic_drv",
 	.id		= UCLASS_ETH_PHY,
+	.of_to_plat	= eth_phy_of_to_plat,
 };
Signature · 1 line
2.17.1
#2 lore raw

PATCH v2 1/6 net: eth-phy: add support of device tree configuration for gpio reset

Quoted 120 lines · Patrick Delaunay

The gpio reset and the assert or deassert delay are defined in generic binding of the ethernet phy in Linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml

reset-gpios:
maxItems: 1
description:
The GPIO phandle and specifier for the PHY reset signal.

reset-assert-us:
description:
Delay after the reset was asserted in microseconds. If this property is missing the delay will be skipped.

reset-deassert-us:
description:
Delay after the reset was deasserted in microseconds. If this property is missing the delay will be skipped.

See also U-Boot: doc/device-tree-bindings/net/phy.txt

This patch adds the parsing of this common DT properties in the u-class "eth_phy_generic", used by default in the associated driver "eth_phy_generic_drv"

This parsing function eth_phy_of_to_plat can be reused by other ethernet phy drivers for this uclass UCLASS_ETH_PHY.

---

Changes in v2:
- Update eth-phy driver (NEW)

 drivers/net/eth-phy-uclass.c | 50 ++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
drivers/net/eth-phy-uclass.c +50 -1
index 07aebd935e..153f6909eb 100644
@@ -6,12 +6,17 @@
 #include <common.h>
 #include <dm.h>
 #include <net.h>
+#include <asm-generic/gpio.h>
 #include <dm/device-internal.h>
 #include <dm/uclass-internal.h>
 #include <dm/lists.h>
+#include <linux/delay.h>
 
 struct eth_phy_device_priv {
        struct mii_dev *mdio_bus;
+       struct gpio_desc reset_gpio;
+       u32 reset_assert_delay;
+       u32 reset_deassert_delay;
 };
 
 int eth_phy_binds_nodes(struct udevice *eth_dev)
@@ -110,13 +115,58 @@ int eth_phy_get_addr(struct udevice *dev)
        return reg;
 }
 
+/* parsing generic properties of devicetree/bindings/net/ethernet-phy.yaml */
+static int eth_phy_of_to_plat(struct udevice *dev)
+{
+       struct eth_phy_device_priv *uc_priv = dev_get_uclass_priv(dev);
+       int ret;
+
+       /* search "reset-gpios" in phy node */
+       ret = gpio_request_by_name(dev, "reset-gpios", 0,
+                                  &uc_priv->reset_gpio,
+                                  GPIOD_IS_OUT);
+       if (ret != -ENOENT)
+               return ret;
+
+       uc_priv->reset_assert_delay = dev_read_u32_default(dev, "reset-assert-us", 0);
+       uc_priv->reset_deassert_delay = dev_read_u32_default(dev, "reset-deassert-us", 0);
+
+       return 0;
+}
+
+void eth_phy_reset(struct udevice *dev, int value)
+{
+       struct eth_phy_device_priv *uc_priv = dev_get_uclass_priv(dev);
+       u32 delay;
+
+       if (!dm_gpio_is_valid(&uc_priv->reset_gpio))
+               return;
+
+       dm_gpio_set_value(&uc_priv->reset_gpio, value);
+
+       delay = value ? uc_priv->reset_assert_delay : uc_priv->reset_deassert_delay;
+       if (delay)
+               udelay(delay);
+}
+
+static int eth_phy_pre_probe(struct udevice *dev)
+{
+       /* Assert and deassert the reset signal */
+       eth_phy_reset(dev, 1);
+       eth_phy_reset(dev, 0);
+
+       return 0;
+}
+
 UCLASS_DRIVER(eth_phy_generic) = {
        .id             = UCLASS_ETH_PHY,
        .name           = "eth_phy_generic",
        .per_device_auto        = sizeof(struct eth_phy_device_priv),
+       .pre_probe      = eth_phy_pre_probe,
 };
 
 U_BOOT_DRIVER(eth_phy_generic_drv) = {
        .name           = "eth_phy_generic_drv",
        .id             = UCLASS_ETH_PHY,
+       .of_to_plat     = eth_phy_of_to_plat,
 };
--
Quoted 2 lines

2.17.1

#3 lore raw

Re: [PATCH v2 1/6] net: eth-phy: add support of device tree configuration for gpio reset

In reply to Patrick Delaunay

Hi Ramon,

Quoted 28 lines · Patrick Delaunay

The gpio reset and the assert or deassert delay are defined in generic binding of the ethernet phy in Linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml

reset-gpios:
maxItems: 1
description:
The GPIO phandle and specifier for the PHY reset signal.

reset-assert-us:
description:
Delay after the reset was asserted in microseconds. If this property is missing the delay will be skipped.

reset-deassert-us:
description:
Delay after the reset was deasserted in microseconds. If this property is missing the delay will be skipped.

See also U-Boot: doc/device-tree-bindings/net/phy.txt

This patch adds the parsing of this common DT properties in the u-class "eth_phy_generic", used by default in the associated driver "eth_phy_generic_drv"

This parsing function eth_phy_of_to_plat can be reused by other ethernet phy drivers for this uclass UCLASS_ETH_PHY.

Quoted 9 lines

---

Changes in v2:
- Update eth-phy driver (NEW)

  drivers/net/eth-phy-uclass.c | 50 ++++++++++++++++++++++++++++++++++++
  1 file changed, 50 insertions(+)

This patch cause issue on some board without CONFIG_DM_GPIO

   powerpc:  w+   ids8313 socrates UCP1020 P3041DS P3041DS_NAND P3041DS_SDCARD P3041DS_SPIFLASH P4080DS P4080DS_SDCARD P4080DS_SPIFLASH P5040DS P5040DS_NAND P5040DS_SDCARD P5040DS_SPIFLASH MPC8548CDS MPC8548CDS_36BIT MPC8548CDS_legacy T2080QDS T2080QDS_NAND T2080QDS_SDCARD T2080QDS_SECURE_BOOT T2080QDS_SPIFLASH T2080QDS_SRIO_PCIE_BOOT kmcent2 MCR3000 MPC8349EMDS MPC8349EMDS_PCI64 MPC8349EMDS_SDRAM MPC8349EMDS_SLAVE +   MPC837XERDB kmcoge5ne kmeter1 kmopti2 kmsupx5 kmtegr1 kmtepr2 tuge1 tuxx1 +powerpc-linux-ld.bfd: drivers/net/eth-phy-uclass.o: in function `eth_phy_of_to_plat':
+drivers/net/eth-phy-uclass.c:133: undefined reference to `gpio_request_by_name'
+powerpc-linux-ld.bfd: drivers/net/eth-phy-uclass.o: in function `eth_phy_reset':
+drivers/net/eth-phy-uclass.c:153: undefined reference to `dm_gpio_set_value'
+make[1]: *** [Makefile:1788: u-boot] Error 1
+make: *** [Makefile:177: sub-make] Error 2

I detect the issue in my stm32/next branch

but I will sent a V3 of the serie with an correction.

Patrick

#4 lore raw

PATCH v2 2/6 net: eth-phy: use dev_dbg and log_notice

In reply to Patrick Delaunay

Replace debug trace and printf to log macros:
- debug() replaced by dev_dbg() when device is available, this macro indicate the device name since commit ceb70bb870ac ("dm: Print device name in dev_xxx like Linux")
- printf() replaced by log_notice() to allow dispatch to log backends.

---

Changes in v2:
- use log macro in eth-phy driver (NEW)

 drivers/net/eth-phy-uclass.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/net/eth-phy-uclass.c +11 -9
index 153f6909eb..962084a7c9 100644
@@ -5,8 +5,10 @@
 
 #include <common.h>
 #include <dm.h>
+#include <log.h>
 #include <net.h>
 #include <asm-generic/gpio.h>
+#include <dm/device_compat.h>
 #include <dm/device-internal.h>
 #include <dm/uclass-internal.h>
 #include <dm/lists.h>
@@ -27,25 +29,25 @@ int eth_phy_binds_nodes(struct udevice *eth_dev)
 
 	mdio_node = dev_read_subnode(eth_dev, "mdio");
 	if (!ofnode_valid(mdio_node)) {
-		debug("%s: %s mdio subnode not found!", __func__,
-		      eth_dev->name);
+		dev_dbg(eth_dev, "%s: %s mdio subnode not found!", __func__,
+			eth_dev->name);
 		return -ENXIO;
 	}
 
 	ofnode_for_each_subnode(phy_node, mdio_node) {
 		node_name = ofnode_get_name(phy_node);
 
-		debug("* Found child node: '%s'\n", node_name);
+		dev_dbg(eth_dev, "* Found child node: '%s'\n", node_name);
 
 		ret = device_bind_driver_to_node(eth_dev,
 						 "eth_phy_generic_drv",
 						 node_name, phy_node, NULL);
 		if (ret) {
-			debug("  - Eth phy binding error: %d\n", ret);
+			dev_dbg(eth_dev, "  - Eth phy binding error: %d\n", ret);
 			continue;
 		}
 
-		debug("  - bound phy device: '%s'\n", node_name);
+		dev_dbg(eth_dev, "  - bound phy device: '%s'\n", node_name);
 	}
 
 	return 0;
@@ -86,14 +88,14 @@ struct mii_dev *eth_phy_get_mdio_bus(struct udevice *eth_dev)
 			 */
 			uc_priv = (struct eth_phy_device_priv *)(dev_get_uclass_priv(phy_dev));
 			if (uc_priv->mdio_bus)
-				printf("Get shared mii bus on %s\n", eth_dev->name);
+				log_notice("Get shared mii bus on %s\n", eth_dev->name);
 			else
-				printf("Can't get shared mii bus on %s\n", eth_dev->name);
+				log_notice("Can't get shared mii bus on %s\n", eth_dev->name);
 
 			return uc_priv->mdio_bus;
 		}
 	} else {
-		printf("FEC: can't find phy-handle\n");
+		log_notice("FEC: can't find phy-handle\n");
 	}
 
 	return NULL;
@@ -106,7 +108,7 @@ int eth_phy_get_addr(struct udevice *dev)
 
 	if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
 				       &phandle_args)) {
-		debug("Failed to find phy-handle");
+		dev_dbg(dev, "Failed to find phy-handle");
 		return -ENODEV;
 	}
 
Signature · 1 line
2.17.1
#5 lore raw

PATCH v2 2/6 net: eth-phy: use dev_dbg and log_notice

Quoted 90 lines · Patrick Delaunay

Replace debug trace and printf to log macros:
- debug() replaced by dev_dbg() when device is available, this macro indicate the device name since commit ceb70bb870ac ("dm: Print device name in dev_xxx like Linux")
- printf() replaced by log_notice() to allow dispatch to log backends.

---

Changes in v2:
- use log macro in eth-phy driver (NEW)

 drivers/net/eth-phy-uclass.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/net/eth-phy-uclass.c +11 -10
index 153f6909eb..962084a7c9 100644
@@ -5,8 +5,10 @@
 
 #include <common.h>
 #include <dm.h>
+#include <log.h>
 #include <net.h>
 #include <asm-generic/gpio.h>
+#include <dm/device_compat.h>
 #include <dm/device-internal.h>
 #include <dm/uclass-internal.h>
 #include <dm/lists.h>
@@ -27,25 +29,25 @@ int eth_phy_binds_nodes(struct udevice *eth_dev)
 
        mdio_node = dev_read_subnode(eth_dev, "mdio");
        if (!ofnode_valid(mdio_node)) {
-               debug("%s: %s mdio subnode not found!", __func__,
-                     eth_dev->name);
+               dev_dbg(eth_dev, "%s: %s mdio subnode not found!", __func__,
+                       eth_dev->name);
                return -ENXIO;
        }
 
        ofnode_for_each_subnode(phy_node, mdio_node) {
                node_name = ofnode_get_name(phy_node);
 
-               debug("* Found child node: '%s'\n", node_name);
+               dev_dbg(eth_dev, "* Found child node: '%s'\n", node_name);
 
                ret = device_bind_driver_to_node(eth_dev,
                                                 "eth_phy_generic_drv",
                                                 node_name, phy_node, NULL);
                if (ret) {
-                       debug("  - Eth phy binding error: %d\n", ret);
+                       dev_dbg(eth_dev, "  - Eth phy binding error: %d\n", ret);
                        continue;
                }
 
-               debug("  - bound phy device: '%s'\n", node_name);
+               dev_dbg(eth_dev, "  - bound phy device: '%s'\n", node_name);
        }
 
        return 0;
@@ -86,14 +88,14 @@ struct mii_dev *eth_phy_get_mdio_bus(struct udevice *eth_dev)
                         */
                        uc_priv = (struct eth_phy_device_priv *)(dev_get_uclass_priv(phy_dev));
                        if (uc_priv->mdio_bus)
-                               printf("Get shared mii bus on %s\n", eth_dev->name);
+                               log_notice("Get shared mii bus on %s\n", eth_dev->name);
                        else
-                               printf("Can't get shared mii bus on %s\n", eth_dev->name);
+                               log_notice("Can't get shared mii bus on %s\n", eth_dev->name);
 
                        return uc_priv->mdio_bus;
                }
        } else {
-               printf("FEC: can't find phy-handle\n");
+               log_notice("FEC: can't find phy-handle\n");
        }
 
        return NULL;
@@ -106,7 +108,7 @@ int eth_phy_get_addr(struct udevice *dev)
 
        if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
                                       &phandle_args)) {
-               debug("Failed to find phy-handle");
+               dev_dbg(dev, "Failed to find phy-handle");
                return -ENODEV;
        }
 
--
Quoted 2 lines

2.17.1

#6 lore raw

PATCH v2 3/6 net: eth-phy: manage subnode mdio0

In reply to Patrick Delaunay

Bind any subnode with name beginning by mdio, mdio0 for example, and not only the "mdio" as namei of subnode.

---

Changes in v2:
- update eth-phy driver to support STM32 binding with a mdio0 subnode (NEW)

 drivers/net/eth-phy-uclass.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/net/eth-phy-uclass.c +8 -2
index 962084a7c9..f04f1c8f09 100644
@@ -27,12 +27,18 @@ int eth_phy_binds_nodes(struct udevice *eth_dev)
 	const char *node_name;
 	int ret;
 
-	mdio_node = dev_read_subnode(eth_dev, "mdio");
+	/* search a subnode named "mdio.*" */
+	dev_for_each_subnode(mdio_node, eth_dev) {
+		node_name = ofnode_get_name(mdio_node);
+		if (!strncmp(node_name, "mdio", 4))
+			break;
+	}
 	if (!ofnode_valid(mdio_node)) {
-		dev_dbg(eth_dev, "%s: %s mdio subnode not found!", __func__,
+		dev_dbg(eth_dev, "%s: %s mdio subnode not found!\n", __func__,
 			eth_dev->name);
 		return -ENXIO;
 	}
+	dev_dbg(eth_dev, "%s: %s subnode found!\n", __func__, node_name);
 
 	ofnode_for_each_subnode(phy_node, mdio_node) {
 		node_name = ofnode_get_name(phy_node);
Signature · 1 line
2.17.1
#7 lore raw

PATCH v2 3/6 net: eth-phy: manage subnode mdio0

Quoted 39 lines · Patrick Delaunay

Bind any subnode with name beginning by mdio, mdio0 for example, and not only the "mdio" as namei of subnode.

---

Changes in v2:
- update eth-phy driver to support STM32 binding with a mdio0 subnode (NEW)

 drivers/net/eth-phy-uclass.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/net/eth-phy-uclass.c +8 -3
index 962084a7c9..f04f1c8f09 100644
@@ -27,12 +27,18 @@ int eth_phy_binds_nodes(struct udevice *eth_dev)
        const char *node_name;
        int ret;
 
-       mdio_node = dev_read_subnode(eth_dev, "mdio");
+       /* search a subnode named "mdio.*" */
+       dev_for_each_subnode(mdio_node, eth_dev) {
+               node_name = ofnode_get_name(mdio_node);
+               if (!strncmp(node_name, "mdio", 4))
+                       break;
+       }
        if (!ofnode_valid(mdio_node)) {
-               dev_dbg(eth_dev, "%s: %s mdio subnode not found!", __func__,
+               dev_dbg(eth_dev, "%s: %s mdio subnode not found!\n", __func__,
                        eth_dev->name);
                return -ENXIO;
        }
+       dev_dbg(eth_dev, "%s: %s subnode found!\n", __func__, node_name);
 
        ofnode_for_each_subnode(phy_node, mdio_node) {
                node_name = ofnode_get_name(phy_node);
--
Quoted 2 lines

2.17.1

#8 lore raw

PATCH v2 4/6 net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv

In reply to Patrick Delaunay

Since the commit commit 6a895d039ba7 ("net: Update eQos driver and FEC driver to use eth phy interfaces") the field phyaddr of driver private data struct eqos_priv is no more used in eqos_start() for the phy_connect() parameter.

Now this variable is only initialized in eqos_probe_resources_stm32() it can be removed.

---

Changes in v2:
- remove unused element in the struct eqos_priv (NEW)

 drivers/net/dwc_eth_qos.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/net/dwc_eth_qos.c +0 -5
index e8242ca4e1..e625aea8d1 100644
@@ -311,7 +311,6 @@ struct eqos_priv {
 	struct clk clk_slave_bus;
 	struct mii_dev *mii;
 	struct phy_device *phy;
-	int phyaddr;
 	u32 max_speed;
 	void *descs;
 	int tx_desc_idx, rx_desc_idx;
@@ -1826,7 +1825,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
 	if (ret)
 		pr_warn("No phy clock provided %d", ret);
 
-	eqos->phyaddr = -1;
 	ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
 					 &phandle_args);
 	if (!ret) {
@@ -1839,9 +1837,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
 		if (ret)
 			pr_warn("gpio_request_by_name(phy reset) not provided %d",
 				ret);
-
-		eqos->phyaddr = ofnode_read_u32_default(phandle_args.node,
-							"reg", -1);
 	}
 
 	debug("%s: OK\n", __func__);
Signature · 1 line
2.17.1
#9 lore raw

PATCH v2 4/6 net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv

Quoted 49 lines · Patrick Delaunay

Since the commit commit 6a895d039ba7 ("net: Update eQos driver and FEC driver to use eth phy interfaces") the field phyaddr of driver private data struct eqos_priv is no more used in eqos_start() for the phy_connect() parameter.

Now this variable is only initialized in eqos_probe_resources_stm32() it can be removed.

---

Changes in v2:
- remove unused element in the struct eqos_priv (NEW)

 drivers/net/dwc_eth_qos.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/net/dwc_eth_qos.c +0 -6
index e8242ca4e1..e625aea8d1 100644
@@ -311,7 +311,6 @@ struct eqos_priv {
        struct clk clk_slave_bus;
        struct mii_dev *mii;
        struct phy_device *phy;
-       int phyaddr;
        u32 max_speed;
        void *descs;
        int tx_desc_idx, rx_desc_idx;
@@ -1826,7 +1825,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
        if (ret)
                pr_warn("No phy clock provided %d", ret);
 
-       eqos->phyaddr = -1;
        ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
                                         &phandle_args);
        if (!ret) {
@@ -1839,9 +1837,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
                if (ret)
                        pr_warn("gpio_request_by_name(phy reset) not provided %d",
                                ret);
-
-               eqos->phyaddr = ofnode_read_u32_default(phandle_args.node,
-                                                       "reg", -1);
        }
 
        debug("%s: OK\n", __func__);
--
Quoted 2 lines

2.17.1

#10 lore raw

PATCH v2 5/6 net: dwc_eth_qos: use generic ethernet phy for stm32 variant

In reply to Patrick Delaunay

Use the generic ethernet phy which already manages the correct binding for gpio reset, including the assert an deassert delays.

---

Changes in v2:
- use generic ethernet phy for stm32 variant, this patch is a REWORK of previous serie: the device parsing is done in eth-phy driver and the gpio support is removed in stm32 variant: eqos_start/stop_resets_stm32 and eqos_probe_resources_stm32.

 drivers/net/Kconfig       |  1 +
 drivers/net/dwc_eth_qos.c | 50 ---------------------------------------
 2 files changed, 1 insertion(+), 50 deletions(-)
drivers/net/Kconfig +1 -0
index 382639044b..adf43fb42a 100644
@@ -206,6 +206,7 @@ config DWC_ETH_QOS_IMX
 config DWC_ETH_QOS_STM32
 	bool "Synopsys DWC Ethernet QOS device support for STM32"
 	depends on DWC_ETH_QOS
+	select DM_ETH_PHY
 	default y if ARCH_STM32MP
 	help
 	  The Synopsys Designware Ethernet QOS IP block with the specific
drivers/net/dwc_eth_qos.c +0 -50

74 lines not on this page · raw message

Signature · 1 line
2.17.1
#11 lore raw

PATCH v2 5/6 net: dwc_eth_qos: use generic ethernet phy for stm32 variant

Quoted 112 lines · Patrick Delaunay

Use the generic ethernet phy which already manages the correct binding for gpio reset, including the assert an deassert delays.

---

Changes in v2:
- use generic ethernet phy for stm32 variant, this patch is a REWORK of previous serie: the device parsing is done in eth-phy driver and the gpio support is removed in stm32 variant: eqos_start/stop_resets_stm32 and eqos_probe_resources_stm32.

 drivers/net/Kconfig       |  1 +
 drivers/net/dwc_eth_qos.c | 50 ---------------------------------------
 2 files changed, 1 insertion(+), 50 deletions(-)
drivers/net/Kconfig +1 -0
index 382639044b..adf43fb42a 100644
@@ -206,6 +206,7 @@ config DWC_ETH_QOS_IMX
 config DWC_ETH_QOS_STM32
        bool "Synopsys DWC Ethernet QOS device support for STM32"
        depends on DWC_ETH_QOS
+       select DM_ETH_PHY
        default y if ARCH_STM32MP
        help
          The Synopsys Designware Ethernet QOS IP block with the specific
drivers/net/dwc_eth_qos.c +0 -51
index e625aea8d1..3fb8bfaf3a 100644
@@ -700,29 +700,6 @@ static int eqos_start_resets_tegra186(struct udevice *dev)
 
 static int eqos_start_resets_stm32(struct udevice *dev)
 {
-       struct eqos_priv *eqos = dev_get_priv(dev);
-       int ret;
-
-       debug("%s(dev=%p):\n", __func__, dev);
-       if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
-               ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
-               if (ret < 0) {
-                       pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d",
-                              ret);
-                       return ret;
-               }
-
-               udelay(2);
-
-               ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
-               if (ret < 0) {
-                       pr_err("dm_gpio_set_value(phy_reset, deassert) failed: %d",
-                              ret);
-                       return ret;
-               }
-       }
-       debug("%s: OK\n", __func__);
-
        return 0;
 }
 
@@ -743,18 +720,6 @@ static int eqos_stop_resets_tegra186(struct udevice *dev)
 
 static int eqos_stop_resets_stm32(struct udevice *dev)
 {
-       struct eqos_priv *eqos = dev_get_priv(dev);
-       int ret;
-
-       if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
-               ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
-               if (ret < 0) {
-                       pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d",
-                              ret);
-                       return ret;
-               }
-       }
-
        return 0;
 }
 
@@ -1785,7 +1750,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
        struct eqos_priv *eqos = dev_get_priv(dev);
        int ret;
        phy_interface_t interface;
-       struct ofnode_phandle_args phandle_args;
 
        debug("%s(dev=%p):\n", __func__, dev);
 
@@ -1825,20 +1789,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
        if (ret)
                pr_warn("No phy clock provided %d", ret);
 
-       ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
-                                        &phandle_args);
-       if (!ret) {
-               /* search "reset-gpios" in phy node */
-               ret = gpio_request_by_name_nodev(phandle_args.node,
-                                                "reset-gpios", 0,
-                                                &eqos->phy_reset_gpio,
-                                                GPIOD_IS_OUT |
-                                                GPIOD_IS_OUT_ACTIVE);
-               if (ret)
-                       pr_warn("gpio_request_by_name(phy reset) not provided %d",
-                               ret);
-       }
-
        debug("%s: OK\n", __func__);
        return 0;
 
--
Quoted 2 lines

2.17.1

#12 lore raw

PATCH v2 6/6 net: dwc: add a common empty ops eqos_null_ops

In reply to Patrick Delaunay

Add a common empty ops: eqos_null_ops() to remove the duplicated empty functions and reduce the driver size for stm32 and imx config.

This patch also aligns the prototype of ops 'eqos_stop_clks' with other eqos ops by adding return value.

---

Changes in v2:
- cleanup ops by adding a common null ops (NEW)

 drivers/net/dwc_eth_qos.c | 97 +++++++++------------------------------
 1 file changed, 22 insertions(+), 75 deletions(-)
drivers/net/dwc_eth_qos.c +22 -75
index 3fb8bfaf3a..4d1e5d6f8f 100644
@@ -285,7 +285,7 @@ struct eqos_ops {
 	int (*eqos_remove_resources)(struct udevice *dev);
 	int (*eqos_stop_resets)(struct udevice *dev);
 	int (*eqos_start_resets)(struct udevice *dev);
-	void (*eqos_stop_clks)(struct udevice *dev);
+	int (*eqos_stop_clks)(struct udevice *dev);
 	int (*eqos_start_clks)(struct udevice *dev);
 	int (*eqos_calibrate_pads)(struct udevice *dev);
 	int (*eqos_disable_calibration)(struct udevice *dev);
@@ -615,12 +615,7 @@ err:
 #endif
 }
 
-static int eqos_start_clks_imx(struct udevice *dev)
-{
-	return 0;
-}
-
-static void eqos_stop_clks_tegra186(struct udevice *dev)
+static int eqos_stop_clks_tegra186(struct udevice *dev)
 {
 #ifdef CONFIG_CLK
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -635,9 +630,10 @@ static void eqos_stop_clks_tegra186(struct udevice *dev)
 #endif
 
 	debug("%s: OK\n", __func__);
+	return 0;
 }
 
-static void eqos_stop_clks_stm32(struct udevice *dev)
+static int eqos_stop_clks_stm32(struct udevice *dev)
 {
 #ifdef CONFIG_CLK
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -652,11 +648,7 @@ static void eqos_stop_clks_stm32(struct udevice *dev)
 #endif
 
 	debug("%s: OK\n", __func__);
-}
-
-static void eqos_stop_clks_imx(struct udevice *dev)
-{
-	/* empty */
+	return 0;
 }
 
 static int eqos_start_resets_tegra186(struct udevice *dev)
@@ -698,16 +690,6 @@ static int eqos_start_resets_tegra186(struct udevice *dev)
 	return 0;
 }
 
-static int eqos_start_resets_stm32(struct udevice *dev)
-{
-	return 0;
-}
-
-static int eqos_start_resets_imx(struct udevice *dev)
-{
-	return 0;
-}
-
 static int eqos_stop_resets_tegra186(struct udevice *dev)
 {
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -718,16 +700,6 @@ static int eqos_stop_resets_tegra186(struct udevice *dev)
 	return 0;
 }
 
-static int eqos_stop_resets_stm32(struct udevice *dev)
-{
-	return 0;
-}
-
-static int eqos_stop_resets_imx(struct udevice *dev)
-{
-	return 0;
-}
-
 static int eqos_calibrate_pads_tegra186(struct udevice *dev)
 {
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -816,26 +788,6 @@ static ulong eqos_get_tick_clk_rate_imx(struct udevice *dev)
 	return imx_get_eqos_csr_clk();
 }
 
-static int eqos_calibrate_pads_stm32(struct udevice *dev)
-{
-	return 0;
-}
-
-static int eqos_calibrate_pads_imx(struct udevice *dev)
-{
-	return 0;
-}
-
-static int eqos_disable_calibration_stm32(struct udevice *dev)
-{
-	return 0;
-}
-
-static int eqos_disable_calibration_imx(struct udevice *dev)
-{
-	return 0;
-}
-
 static int eqos_set_full_duplex(struct udevice *dev)
 {
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -932,11 +884,6 @@ static int eqos_set_tx_clk_speed_tegra186(struct udevice *dev)
 	return 0;
 }
 
-static int eqos_set_tx_clk_speed_stm32(struct udevice *dev)
-{
-	return 0;
-}
-
 static int eqos_set_tx_clk_speed_imx(struct udevice *dev)
 {
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -1894,11 +1841,6 @@ static int eqos_remove_resources_stm32(struct udevice *dev)
 	return 0;
 }
 
-static int eqos_remove_resources_imx(struct udevice *dev)
-{
-	return 0;
-}
-
 static int eqos_probe(struct udevice *dev)
 {
 	struct eqos_priv *eqos = dev_get_priv(dev);
@@ -1987,6 +1929,11 @@ static int eqos_remove(struct udevice *dev)
 	return 0;
 }
 
+static int eqos_null_ops(struct udevice *dev)
+{
+	return 0;
+}
+
 static const struct eth_ops eqos_ops = {
 	.start = eqos_start,
 	.stop = eqos_stop,
@@ -2032,13 +1979,13 @@ static struct eqos_ops eqos_stm32_ops = {
 	.eqos_flush_buffer = eqos_flush_buffer_generic,
 	.eqos_probe_resources = eqos_probe_resources_stm32,
 	.eqos_remove_resources = eqos_remove_resources_stm32,
-	.eqos_stop_resets = eqos_stop_resets_stm32,
-	.eqos_start_resets = eqos_start_resets_stm32,
+	.eqos_stop_resets = eqos_null_ops,
+	.eqos_start_resets = eqos_null_ops,
 	.eqos_stop_clks = eqos_stop_clks_stm32,
 	.eqos_start_clks = eqos_start_clks_stm32,
-	.eqos_calibrate_pads = eqos_calibrate_pads_stm32,
-	.eqos_disable_calibration = eqos_disable_calibration_stm32,
-	.eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_stm32,
+	.eqos_calibrate_pads = eqos_null_ops,
+	.eqos_disable_calibration = eqos_null_ops,
+	.eqos_set_tx_clk_speed = eqos_null_ops,
 	.eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_stm32
 };
 
@@ -2059,13 +2006,13 @@ static struct eqos_ops eqos_imx_ops = {
 	.eqos_inval_buffer = eqos_inval_buffer_generic,
 	.eqos_flush_buffer = eqos_flush_buffer_generic,
 	.eqos_probe_resources = eqos_probe_resources_imx,
-	.eqos_remove_resources = eqos_remove_resources_imx,
-	.eqos_stop_resets = eqos_stop_resets_imx,
-	.eqos_start_resets = eqos_start_resets_imx,
-	.eqos_stop_clks = eqos_stop_clks_imx,
-	.eqos_start_clks = eqos_start_clks_imx,
-	.eqos_calibrate_pads = eqos_calibrate_pads_imx,
-	.eqos_disable_calibration = eqos_disable_calibration_imx,
+	.eqos_remove_resources = eqos_null_ops,
+	.eqos_stop_resets = eqos_null_ops,
+	.eqos_start_resets = eqos_null_ops,
+	.eqos_stop_clks = eqos_null_ops,
+	.eqos_start_clks = eqos_null_ops,
+	.eqos_calibrate_pads = eqos_null_ops,
+	.eqos_disable_calibration = eqos_null_ops,
 	.eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_imx,
 	.eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_imx
 };
Signature · 1 line
2.17.1
#13 lore raw

PATCH v2 6/6 net: dwc: add a common empty ops eqos_null_ops

Quoted 206 lines · Patrick Delaunay

Add a common empty ops: eqos_null_ops() to remove the duplicated empty functions and reduce the driver size for stm32 and imx config.

This patch also aligns the prototype of ops 'eqos_stop_clks' with other eqos ops by adding return value.

---

Changes in v2:
- cleanup ops by adding a common null ops (NEW)

 drivers/net/dwc_eth_qos.c | 97 +++++++++------------------------------
 1 file changed, 22 insertions(+), 75 deletions(-)
drivers/net/dwc_eth_qos.c +22 -76
index 3fb8bfaf3a..4d1e5d6f8f 100644
@@ -285,7 +285,7 @@ struct eqos_ops {
        int (*eqos_remove_resources)(struct udevice *dev);
        int (*eqos_stop_resets)(struct udevice *dev);
        int (*eqos_start_resets)(struct udevice *dev);
-       void (*eqos_stop_clks)(struct udevice *dev);
+       int (*eqos_stop_clks)(struct udevice *dev);
        int (*eqos_start_clks)(struct udevice *dev);
        int (*eqos_calibrate_pads)(struct udevice *dev);
        int (*eqos_disable_calibration)(struct udevice *dev);
@@ -615,12 +615,7 @@ err:
 #endif
 }
 
-static int eqos_start_clks_imx(struct udevice *dev)
-{
-       return 0;
-}
-
-static void eqos_stop_clks_tegra186(struct udevice *dev)
+static int eqos_stop_clks_tegra186(struct udevice *dev)
 {
 #ifdef CONFIG_CLK
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -635,9 +630,10 @@ static void eqos_stop_clks_tegra186(struct udevice *dev)
 #endif
 
        debug("%s: OK\n", __func__);
+       return 0;
 }
 
-static void eqos_stop_clks_stm32(struct udevice *dev)
+static int eqos_stop_clks_stm32(struct udevice *dev)
 {
 #ifdef CONFIG_CLK
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -652,11 +648,7 @@ static void eqos_stop_clks_stm32(struct udevice *dev)
 #endif
 
        debug("%s: OK\n", __func__);
-}
-
-static void eqos_stop_clks_imx(struct udevice *dev)
-{
-       /* empty */
+       return 0;
 }
 
 static int eqos_start_resets_tegra186(struct udevice *dev)
@@ -698,16 +690,6 @@ static int eqos_start_resets_tegra186(struct udevice *dev)
        return 0;
 }
 
-static int eqos_start_resets_stm32(struct udevice *dev)
-{
-       return 0;
-}
-
-static int eqos_start_resets_imx(struct udevice *dev)
-{
-       return 0;
-}
-
 static int eqos_stop_resets_tegra186(struct udevice *dev)
 {
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -718,16 +700,6 @@ static int eqos_stop_resets_tegra186(struct udevice *dev)
        return 0;
 }
 
-static int eqos_stop_resets_stm32(struct udevice *dev)
-{
-       return 0;
-}
-
-static int eqos_stop_resets_imx(struct udevice *dev)
-{
-       return 0;
-}
-
 static int eqos_calibrate_pads_tegra186(struct udevice *dev)
 {
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -816,26 +788,6 @@ static ulong eqos_get_tick_clk_rate_imx(struct udevice *dev)
        return imx_get_eqos_csr_clk();
 }
 
-static int eqos_calibrate_pads_stm32(struct udevice *dev)
-{
-       return 0;
-}
-
-static int eqos_calibrate_pads_imx(struct udevice *dev)
-{
-       return 0;
-}
-
-static int eqos_disable_calibration_stm32(struct udevice *dev)
-{
-       return 0;
-}
-
-static int eqos_disable_calibration_imx(struct udevice *dev)
-{
-       return 0;
-}
-
 static int eqos_set_full_duplex(struct udevice *dev)
 {
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -932,11 +884,6 @@ static int eqos_set_tx_clk_speed_tegra186(struct udevice *dev)
        return 0;
 }
 
-static int eqos_set_tx_clk_speed_stm32(struct udevice *dev)
-{
-       return 0;
-}
-
 static int eqos_set_tx_clk_speed_imx(struct udevice *dev)
 {
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -1894,11 +1841,6 @@ static int eqos_remove_resources_stm32(struct udevice *dev)
        return 0;
 }
 
-static int eqos_remove_resources_imx(struct udevice *dev)
-{
-       return 0;
-}
-
 static int eqos_probe(struct udevice *dev)
 {
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -1987,6 +1929,11 @@ static int eqos_remove(struct udevice *dev)
        return 0;
 }
 
+static int eqos_null_ops(struct udevice *dev)
+{
+       return 0;
+}
+
 static const struct eth_ops eqos_ops = {
        .start = eqos_start,
        .stop = eqos_stop,
@@ -2032,13 +1979,13 @@ static struct eqos_ops eqos_stm32_ops = {
        .eqos_flush_buffer = eqos_flush_buffer_generic,
        .eqos_probe_resources = eqos_probe_resources_stm32,
        .eqos_remove_resources = eqos_remove_resources_stm32,
-       .eqos_stop_resets = eqos_stop_resets_stm32,
-       .eqos_start_resets = eqos_start_resets_stm32,
+       .eqos_stop_resets = eqos_null_ops,
+       .eqos_start_resets = eqos_null_ops,
        .eqos_stop_clks = eqos_stop_clks_stm32,
        .eqos_start_clks = eqos_start_clks_stm32,
-       .eqos_calibrate_pads = eqos_calibrate_pads_stm32,
-       .eqos_disable_calibration = eqos_disable_calibration_stm32,
-       .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_stm32,
+       .eqos_calibrate_pads = eqos_null_ops,
+       .eqos_disable_calibration = eqos_null_ops,
+       .eqos_set_tx_clk_speed = eqos_null_ops,
        .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_stm32
 };
 
@@ -2059,13 +2006,13 @@ static struct eqos_ops eqos_imx_ops = {
        .eqos_inval_buffer = eqos_inval_buffer_generic,
        .eqos_flush_buffer = eqos_flush_buffer_generic,
        .eqos_probe_resources = eqos_probe_resources_imx,
-       .eqos_remove_resources = eqos_remove_resources_imx,
-       .eqos_stop_resets = eqos_stop_resets_imx,
-       .eqos_start_resets = eqos_start_resets_imx,
-       .eqos_stop_clks = eqos_stop_clks_imx,
-       .eqos_start_clks = eqos_start_clks_imx,
-       .eqos_calibrate_pads = eqos_calibrate_pads_imx,
-       .eqos_disable_calibration = eqos_disable_calibration_imx,
+       .eqos_remove_resources = eqos_null_ops,
+       .eqos_stop_resets = eqos_null_ops,
+       .eqos_start_resets = eqos_null_ops,
+       .eqos_stop_clks = eqos_null_ops,
+       .eqos_start_clks = eqos_null_ops,
+       .eqos_calibrate_pads = eqos_null_ops,
+       .eqos_disable_calibration = eqos_null_ops,
        .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_imx,
        .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_imx
 };
--
Quoted 2 lines

2.17.1

#14 lore raw
In reply to Patrick Delaunay

Hi Ramon,

Quoted 32 lines · Patrick Delaunay

It is the V2 version of [1] after Marek remarks: all commit are new.

I change the DWC_ETH_QOS STM32 variant by using generic eth phy driver.

This driver is updated to use the gpio reset and assert/deassert delay from DT with the generic binding defined in linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml
or in U-Boot: doc/device-tree-bindings/net/phy.txt

[1] net: dwc_eth_qos: add support of device tree configuration for reset delay

     http://patchwork.ozlabs.org/project/uboot/list/?series=238253&state=*

Changes in v2:
- Update eth-phy driver (NEW)
- use log macro in eth-phy driver (NEW)
- update eth-phy driver to support STM32 binding with a mdio0 subnode (NEW)
- remove unused element in the struct eqos_priv (NEW)
- use generic ethernet phy for stm32 variant, this patch is a REWORK of previous serie: the device parsing is done in eth-phy driver and the gpio support is removed in stm32 variant: eqos_start/stop_resets_stm32 and eqos_probe_resources_stm32.
- cleanup ops by adding a common null ops (NEW)

Patrick Delaunay (6):
net: eth-phy: add support of device tree configuration for gpio reset
net: eth-phy: use dev_dbg and log_notice
net: eth-phy: manage subnode mdio0
net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv
net: dwc_eth_qos: use generic ethernet phy for stm32 variant
net: dwc: add a common empty ops eqos_null_ops

Quoted 5 lines
  drivers/net/Kconfig          |   1 +
  drivers/net/dwc_eth_qos.c    | 152 +++++------------------------------
  drivers/net/eth-phy-uclass.c |  78 +++++++++++++++---
  3 files changed, 91 insertions(+), 140 deletions(-)

This serie is also accepted in patchwork,  but not merged in u-boot-net/network_master:

http://patchwork.ozlabs.org/project/uboot/list/?series=240808&state=*

Do you plan to integrate it in you next pull request for v2021.10 ?

Regards

Patrick

#15 lore raw
Quoted 45 lines · Patrick DELAUNAY

Hi Ramon,

Quoted 32 lines · Patrick Delaunay

It is the V2 version of [1] after Marek remarks: all commit are new.

I change the DWC_ETH_QOS STM32 variant by using generic eth phy driver.

This driver is updated to use the gpio reset and assert/deassert delay from DT with the generic binding defined in linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml
or in U-Boot: doc/device-tree-bindings/net/phy.txt

[1] net: dwc_eth_qos: add support of device tree configuration for reset delay

     http://patchwork.ozlabs.org/project/uboot/list/?series=238253&state=*

Changes in v2:
- Update eth-phy driver (NEW)
- use log macro in eth-phy driver (NEW)
- update eth-phy driver to support STM32 binding with a mdio0 subnode (NEW)
- remove unused element in the struct eqos_priv (NEW)
- use generic ethernet phy for stm32 variant, this patch is a REWORK of previous serie: the device parsing is done in eth-phy driver and the gpio support is removed in stm32 variant: eqos_start/stop_resets_stm32 and eqos_probe_resources_stm32.
- cleanup ops by adding a common null ops (NEW)

Patrick Delaunay (6):
net: eth-phy: add support of device tree configuration for gpio reset
net: eth-phy: use dev_dbg and log_notice
net: eth-phy: manage subnode mdio0
net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv
net: dwc_eth_qos: use generic ethernet phy for stm32 variant
net: dwc: add a common empty ops eqos_null_ops

Quoted 5 lines
  drivers/net/Kconfig          |   1 +
  drivers/net/dwc_eth_qos.c    | 152 +++++------------------------------
  drivers/net/eth-phy-uclass.c |  78 +++++++++++++++---
  3 files changed, 91 insertions(+), 140 deletions(-)

This serie is also accepted in patchwork, but not merged in u-boot-net/network_master:

Quoted 10 lines

http://patchwork.ozlabs.org/project/uboot/list/?series=240808&state=*

Do you plan to integrate it in you next pull request for v2021.10 ?

Regards

Patrick

Slipped under my arms someway, I will review shortly. Sorry.