package/libglvnd: introduce the GL vendor-neutral proxy (branch yem/libglvnd)
v4 cover package/libglvnd: introduce the GL vendor-neutral proxy (branch yem/libglvnd)
Hello All!
This is a respin from the original series by Jakub, heavily massaged by me (Yann); thanks Jakub for your initial work! :-) What follows is Jakub's original cover letter (tweaked to drop the reference to other patches not include in this respin):
Here comes support for GLVND which is a GL Vendor-Neutral disaptches, initially proposed by NVidia, currently done within the Freedestop/ RedHat project team as libglvnd.
It's useful not only for NVidia (they were first to adopt it though) but might be also beneficial for others, for example allowing you to deliver an image running on multiple machines with different GPUs and their respective OpenGL providers, which happens quite often on x86_64 and was the major reason to implement it in Buildroot for me.
On the other hand, if your board has multiple GPUs it also helps a lot
- for example when you have a "display" unit and "compute/accel" graphics units from different vendors. Happens on some ARM boards recently and there are already efforts to integrate it in these GL stacks.
The only EXT needed by GL provider is to implement GL_EXT_libglvnd which is a dummy extension allowing GL lib to "register" to let it receive GL calls.
In practive it's very simple, the libglvnd delivers its own set of "dummy" libraries:
- libGL.so
- libGLX.so
- libOpenGL.so
- libEGL.so
and needs the actual providers to be present as they already are but with names like libGLX_nvidia.so.
It allows developers to link against vendor-neutral dummy libs and openGL contexts without thinking about target GPU too much as long as it supports desired GL/EGL standard.
Also delivers GL API headers (GL/gl.h, GL/egl.h, etc.) so removes need of mesa3d-headers in GLVND-supported drivers.
Currently it's supported by all Mesa-compatible drivers and NVidia. For simplicity sake, and to ease introduction of libglvnd, only mesa3d is converted to be compatible with libglvnd. Other providers, like NVidia, can be converted (or added!) in follow-up patches.
Changes v3 -> v4:
- bump to libglvnd 1.3.2
Regards,
Yann E. MORIN.
The following changes since commit 1640b0c1f967e394f87eb7a0ca04ae40aade11b4
package/mbpfan: new package (2020-07-27 10:13:06 +0200)
are available in the git repository at:
https://git.busybox.net/~ymorin/git/buildroot
for you to fetch changes up to c48baa11cd0c06ec5af3fd4989306c3ec581d0e9
package/mesa3d: make it aware of libglvnd and support it when present (2020-07-27 10:45:34 +0200)
----------------------------------------------------------------
Jakub Skrzypnik (2):
package/libglvnd: new package
package/mesa3d: make it aware of libglvnd and support it when present
package/Config.in | 1 + package/libglvnd/Config.in | 42 +++++++++++++++++++++++++++++++++ package/libglvnd/libglvnd.hash | 7 ++++++ package/libglvnd/libglvnd.mk | 53 ++++++++++++++++++++++++++++++++++++++++++ package/mesa3d/Config.in | 15 +++++++----- package/mesa3d/mesa3d.mk | 15 ++++++++---- 6 files changed, 123 insertions(+), 10 deletions(-) create mode 100644 package/libglvnd/Config.in create mode 100644 package/libglvnd/libglvnd.hash create mode 100644 package/libglvnd/libglvnd.mk
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v4 1/2 package/libglvnd: new package
From: Jakub Skrzypnik <[email protected]>
libglvnd is the GL Vendor-Neutral Dispatch library, used to dispatch GL calls across multiple GL implementations at runtime.
Full GL support, as usual, requires (parts of) the X11 stack: libX11, libXext, and xorgproto (for glproto). However, with just libX11, it is possible to do EGL on X11. EGL and GLES have no dependencies.
Note: x11 and glx are 'features', so need to be 'enabled' or 'disabled' (or 'auto', but we don't care in Buildroot), while egl and gles1/2 are 'booleans', so need to be 'true' or 'false'.
When an actual provider for GL, EGL, or GLES is enabled, so must the corresponding flavour be enabled in libglvnd. Conversely, when there is no actual provider, the corresponding support must be disabled in libglvnd. So we make each flavour selectable with hidden options, which actual providers will have to select.
The license for libglvnd itself is a custom license by NVidia. It is pretty close to MIT, but it's different (although Debian does classify it as MIT); SPDX has no identifier for that license either. As such, we choose to just identify it as 'libglvnd license', and let users deal that with their legal department. Additionally, libglvnd bundles some code from other projects, so we list them explicitly as well.
[yann.morin.1998 at free.fr:
- provide help text
- don't force X11 libraries, split them between X11 and full GL
- make each flavour selectable
- fix make check-package issues
- fix and complete licensing information
- bump to 1.3.2
- expand commit log
]
--- package/Config.in | 1 + package/libglvnd/Config.in | 42 +++++++++++++++++++++++++++ package/libglvnd/libglvnd.hash | 7 +++++ package/libglvnd/libglvnd.mk | 53 ++++++++++++++++++++++++++++++++++ 4 files changed, 103 insertions(+) create mode 100644 package/libglvnd/Config.in create mode 100644 package/libglvnd/libglvnd.hash create mode 100644 package/libglvnd/libglvnd.mk
package/Config.in +1 -0
@@ -311,6 +311,7 @@ comment "Graphic libraries" source "package/fbv/Config.in" source "package/freerdp/Config.in" source "package/imagemagick/Config.in" + source "package/libglvnd/Config.in" source "package/linux-fusion/Config.in" source "package/lite/Config.in" source "package/mesa3d/Config.in"
package/libglvnd/Config.in new file +42 -0
42 lines not on this page · raw message
package/libglvnd/libglvnd.hash new file +7 -0
@@ -0,0 +1,7 @@ +# Locally computed +sha256 6332c27f4c792b09a3eb1d7ae18c2d6ff6a0acaf3a746489caf859e659fca2f7 libglvnd-v1.3.2.tar.gz + +# Locally computed hashes for license files +sha256 224534547628a9e5e889d8808385bd38839e6bdb77d89c90ac04dad6891a4f5f README.md +sha256 bebdc0fd27cd37af8406e47af23c113866b7856c3f7349ffcbc672029ec8acf7 src/util/uthash/LICENSE +sha256 f6f207863675ca5a5128fd120b9aef4f4bbab73ffa57e5f771ccffc8e3cc56b7 src/util/cJSON/LICENSE
package/libglvnd/libglvnd.mk new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v4 2/2 package/mesa3d: make it aware of libglvnd and support it when present
In reply to Yann E. MORINFrom: Jakub Skrzypnik <[email protected]>
When libglvnd is enabled, mesa3d must be told so, so as it installs its libraries with the vendor suffix (e.g. libEGL_mesa.so instead of libEGL.so).
Additionally, the provider (in Buildroot parlance) is libglvnd, not mesa3d.
[yann.morin.1998 at free.fr:
- don't override the _PROVIDES variable, only assign when needed
]
--- package/mesa3d/Config.in | 15 +++++++++------ package/mesa3d/mesa3d.mk | 15 +++++++++++---- 2 files changed, 20 insertions(+), 10 deletions(-)
package/mesa3d/Config.in +9 -6
@@ -422,7 +422,8 @@ comment "gbm support needs a dri driver or a gallium driver w/ EGL support." config BR2_PACKAGE_MESA3D_OPENGL_GLX bool "OpenGL GLX" depends on BR2_PACKAGE_XORG7 - select BR2_PACKAGE_HAS_LIBGL + select BR2_PACKAGE_HAS_LIBGL if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_GL if BR2_PACKAGE_LIBGLVND select BR2_PACKAGE_MESA3D_NEEDS_X11 help Enable GLX graphic acceleration (OpenGL + X11).
@@ -432,7 +433,8 @@ comment "OpenGL GLX support needs X11" config BR2_PACKAGE_MESA3D_OPENGL_EGL bool "OpenGL EGL" - select BR2_PACKAGE_HAS_LIBEGL + select BR2_PACKAGE_HAS_LIBEGL if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_EGL if BR2_PACKAGE_LIBGLVND select BR2_PACKAGE_HAS_LIBEGL_WAYLAND select BR2_PACKAGE_MESA3D_GBM help
@@ -441,7 +443,8 @@ config BR2_PACKAGE_MESA3D_OPENGL_EGL config BR2_PACKAGE_MESA3D_OPENGL_ES bool "OpenGL ES" - select BR2_PACKAGE_HAS_LIBGLES + select BR2_PACKAGE_HAS_LIBGLES if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_GLES if BR2_PACKAGE_LIBGLVND help Use the Khronos OpenGL ES APIs. This is commonly used on embedded systems and represents a subset of the OpenGL API.
@@ -449,13 +452,13 @@ config BR2_PACKAGE_MESA3D_OPENGL_ES endif # BR2_PACKAGE_MESA3D_DRIVER config BR2_PACKAGE_PROVIDES_LIBGL - default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_GLX + default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_GLX && !BR2_PACKAGE_LIBGLVND config BR2_PACKAGE_PROVIDES_LIBEGL - default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_EGL + default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_EGL && !BR2_PACKAGE_LIBGLVND config BR2_PACKAGE_PROVIDES_LIBGLES - default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_ES + default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_ES && !BR2_PACKAGE_LIBGLVND config BR2_PACKAGE_PROVIDES_LIBOPENCL default "mesa3d" if BR2_PACKAGE_MESA3D_OPENCL
package/mesa3d/mesa3d.mk +11 -4
@@ -162,9 +162,9 @@ MESA3D_CONF_OPTS += -Dopengl=true # we do not need libva support in mesa3d, therefore disable this option MESA3D_CONF_OPTS += -Dgallium-va=false -# libGL is only provided for a full xorg stack +# libGL is only provided for a full xorg stack, without libglvnd ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_GLX),y) -MESA3D_PROVIDES += libgl +MESA3D_PROVIDES += $(if $(BR2_PACKAGE_LIBGLVND),,libgl) else define MESA3D_REMOVE_OPENGL_HEADERS rm -rf $(STAGING_DIR)/usr/include/GL/
@@ -224,7 +224,7 @@ MESA3D_CONF_OPTS += \ endif ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_EGL),y) -MESA3D_PROVIDES += libegl +MESA3D_PROVIDES += $(if $(BR2_PACKAGE_LIBGLVND),,libegl) MESA3D_CONF_OPTS += \ -Degl=true else
@@ -233,7 +233,7 @@ MESA3D_CONF_OPTS += \ endif ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y) -MESA3D_PROVIDES += libgles +MESA3D_PROVIDES += $(if $(BR2_PACKAGE_LIBGLVND),,libgles) MESA3D_CONF_OPTS += -Dgles1=true -Dgles2=true else MESA3D_CONF_OPTS += -Dgles1=false -Dgles2=false
@@ -281,4 +281,11 @@ else MESA3D_CONF_OPTS += -Dzstd=false endif +ifeq ($(BR2_PACKAGE_LIBGLVND),y) +MESA3D_DEPENDENCIES += libglvnd +MESA3D_CONF_OPTS += -Dglvnd=true +else +MESA3D_CONF_OPTS += -Dglvnd=false +endif + $(eval $(meson-package))
Signature · 1 line
2.20.1
PATCH v4 2/2 package/mesa3d: make it aware of libglvnd and support it when present
Quoted 23 lines · On Mon, 27 Jul 2020 10:47:02 +0200 "Yann E. MORIN" <[email protected]>…
From: Jakub Skrzypnik <[email protected]>
When libglvnd is enabled, mesa3d must be told so, so as it installs its libraries with the vendor suffix (e.g. libEGL_mesa.so instead of libEGL.so).
Additionally, the provider (in Buildroot parlance) is libglvnd, not mesa3d.
Signed-off-by Jakub Skrzypnik <[email protected]>[yann.morin.1998 at free.fr:
- don't override the_PROVIDESvariable, only assign when needed
]Signed-off-by Yann E. MORIN <[email protected]>--- package/mesa3d/Config.in | 15 +++++++++------ package/mesa3d/mesa3d.mk | 15 +++++++++++---- 2 files changed, 20 insertions(+), 10 deletions(-)package/mesa3d/Config.in +0
-0
package/mesa3d/Config.in comment "gbm support needs a dri driver or a gallium driver w/ EGL support." · line 426
Quoted 6 lines
package/mesa3d/Config.in +2
-1@@ -422,7 +422,8 @@ comment "gbm support needs a dri driver or a gallium driver w/ EGL support." config BR2_PACKAGE_MESA3D_OPENGL_GLX bool "OpenGL GLX" depends on BR2_PACKAGE_XORG7 - select BR2_PACKAGE_HAS_LIBGL + select BR2_PACKAGE_HAS_LIBGL if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_GL if BR2_PACKAGE_LIBGLVND
I don't immediately see a good solution for this, but I find that solution to be quite annoying :-/
Indeed, I understand that once libglvnd is enabled, the GL-provider is libglvnd, which in the background is using mesa3d. The dance to handle libglvnd in mesa3d is already not nice, and we would have to have the same dance in other GL providers that support libglvnd.
OK, here is some vague idea for a possible solution:
- We introduce an intermediate "layer" between libgl and GL providers.
- GL provides no longer provide directly libgl, but instead some kind of libgl-low, libgl-real (or some better name)
- libgl is then provided either by libglvnd on top of libgl-low/libgl-real, *or* on top of some simple libgl-proxy package that does nothing but make libgl depend on libgl-low
I *think* this would perhaps avoid that complexity in mesa3d... obviously for additional complexity in terms of how the virtual packages in GL world all work together.
Would this make sense ? Is it over-engineered ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v4 2/2 package/mesa3d: make it aware of libglvnd and support it when present
Thomas, All,
On 2020-07-27 17:38 +0200, Thomas Petazzoni spake thusly:
Quoted 9 lines
Quoted 7 lines · On Mon, 27 Jul 2020 10:47:02 +0200 "Yann E. MORIN" <[email protected]>…
From: Jakub Skrzypnik <[email protected]>
When libglvnd is enabled, mesa3d must be told so, so as it installs its libraries with the vendor suffix (e.g. libEGL_mesa.so instead of libEGL.so).
Additionally, the provider (in Buildroot parlance) is libglvnd, not mesa3d.
[--SNIP--]
Quoted 9 lines
package/mesa3d/Config.in comment "gbm support needs a dri driver or a gallium driver w/ EGL support." · line 426
Quoted 6 lines
config
BR2_PACKAGE_MESA3D_OPENGL_GLXpackage/mesa3d/Config.in +2
-1bool "OpenGL GLX" depends on BR2_PACKAGE_XORG7 - select BR2_PACKAGE_HAS_LIBGL + select BR2_PACKAGE_HAS_LIBGL if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_GL if BR2_PACKAGE_LIBGLVNDI don't immediately see a good solution for this, but I find that solution to be quite annoying :-/
At first, I though so too, and I also looked for a better approach, but...
Quoted 4 lines
Indeed, I understand that once libglvnd is enabled, the GL-provider is libglvnd, which in the background is using mesa3d. The dance to handle libglvnd in mesa3d is already not nice, and we would have to have the same dance in other GL providers that support libglvnd.
Well, it is not _so_ bad. We could maybe make it a bit simpler, with:
config BR2_PACKAGE_MESA3D_OPENGL_GLX
bool "OpenGL GLX"
select BR2_PACKAGE_HAS_LIBGL
We still need to declare emsa3d as providing libgl depending on whether libglvnd is enabled, but we can make it a bit more "compact":
if !BR2_PACKAGE_LIBGLVND
config BR2_PACKAGE_PROVIDES_LIBGL
default "mesa3d" if BR2_PACKAGE_MESA3D_OPENGL_GLX
[EGL and GLES too here]
endif
And in mesa3d.mk too:
ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_GLX),y)
MESA3D_PROVIDES += $(if $(BR2_PACKAGE_LIBGLVND),,libgl)
[...]
endifBut now, in libglvnd, we don't need any extra symbol, we can just re-use BR2_PACKAGE_PROVIDES_LIBGL et al.:
config BR2_PACKAGE_LIBGLVND
bool "libglvnd"
select BR2_PACKAGE_XLIB_LIBX11 if BR2_PACKAGE_PROVIDES_LIBGL select BR2_PACKAGE_XLIB_LIBXEXT if BR2_PACKAGE_PROVIDES_LIBGL select BR2_PACKAGE_XLIB_XORGPROTO if BR2_PACKAGE_PROVIDES_LIBGL select BR2_PACKAGE_HAS_LIBGL if BR2_PACKAGE_PROVIDES_LIBGL
if BR2_PACKAGE_LIBGLVND
config BR2_PACKAGE_PROVIDES_LIBGL
default "libglvnd" if BR2_PACKAGE_HAS_LIBGL
endif
and in libglvnd.mk:
ifeq ($(BR2_PACKAGE_PROVIDES_LIBGL),y)
LIBGLVND_DEPENDENCIES += xlib_libXext xorgproto
LIBGLVND_CONF_OPTS += -Dglx=enabled
LIBGLVND_PROVIDES += libgl
else
LIBGLVND_CONF_OPTS += -Dglx=disabled
endifQuoted 2 lines
OK, here is some vague idea for a possible solution:
- We introduce an intermediate "layer" between libgl and GL providers.
[--SNIP--]
Quoted 3 lines
I *think* this would perhaps avoid that complexity in mesa3d... obviously for additional complexity in terms of how the virtual packages in GL world all work together.
You are reinventing libglvnd in between libglvnd and actual providers, no?
Also, remember that individual GL providers will still have to function as providers without libglvnd, which is not required.
But I would like we progress on the topic, and when we have a second candidate for libglvnd use, we can revisit the topic and see if we can over-engineer the thing.
Usually, we wait for three or four cases before trying to solve the problem in a generic fashion, and so I'd like to do here as well. Because so far, only two providers are known to work with libglvnd:
mewsa3d and nvidia. ATI might be a third one, but I have no clue about it. And in the SoC land, there is not much that is libglvnd compatible so far, if at all.
So, in the short-to-medium term, we'd at best have three providers. Is that enough to delve into a generic infra so far? Not sure...
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Re: [Buildroot] [PATCH 2/2 v4] package/mesa3d: make it aware of libglvnd and support it when present
Hello Yann, Thomas,
Le 27/07/2020 à 19:35, Yann E. MORIN a écrit :
Quoted 106 lines
Thomas, All,
On 2020-07-27 17:38 +0200, Thomas Petazzoni spake thusly:
Quoted 9 lines
Quoted 7 lines · On Mon, 27 Jul 2020 10:47:02 +0200 "Yann E. MORIN" <[email protected]>…
From: Jakub Skrzypnik <[email protected]>
When libglvnd is enabled, mesa3d must be told so, so as it installs its libraries with the vendor suffix (e.g. libEGL_mesa.so instead of libEGL.so).
Additionally, the provider (in Buildroot parlance) is libglvnd, not mesa3d.
[--SNIP--]
Quoted 9 lines
package/mesa3d/Config.in comment "gbm support needs a dri driver or a gallium driver w/ EGL support." · line 426
Quoted 6 lines
config
BR2_PACKAGE_MESA3D_OPENGL_GLXpackage/mesa3d/Config.in +2
-1bool "OpenGL GLX" depends on BR2_PACKAGE_XORG7 - select BR2_PACKAGE_HAS_LIBGL + select BR2_PACKAGE_HAS_LIBGL if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_GL if BR2_PACKAGE_LIBGLVNDI don't immediately see a good solution for this, but I find that solution to be quite annoying :-/
At first, I though so too, and I also looked for a better approach, but...
Quoted 4 lines
Indeed, I understand that once libglvnd is enabled, the GL-provider is libglvnd, which in the background is using mesa3d. The dance to handle libglvnd in mesa3d is already not nice, and we would have to have the same dance in other GL providers that support libglvnd.
Well, it is not _so_ bad. We could maybe make it a bit simpler, with:
config
BR2_PACKAGE_MESA3D_OPENGL_GLX
bool "OpenGL GLX"
selectBR2_PACKAGE_HAS_LIBGLWe still need to declare emsa3d as providing libgl depending on whether libglvnd is enabled, but we can make it a bit more "compact":
if !BR2_PACKAGE_LIBGLVND
config
BR2_PACKAGE_PROVIDES_LIBGL
default "mesa3d" ifBR2_PACKAGE_MESA3D_OPENGL_GLX[EGL and GLES too here]
endif
And in mesa3d.mk too:
ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_GLX),y) MESA3D_PROVIDES += $(if $(BR2_PACKAGE_LIBGLVND),,libgl) [...] endifBut now, in libglvnd, we don't need any extra symbol, we can just re-use
BR2_PACKAGE_PROVIDES_LIBGLet al.:config
BR2_PACKAGE_LIBGLVND
bool "libglvnd"
selectBR2_PACKAGE_XLIB_LIBX11ifBR2_PACKAGE_PROVIDES_LIBGLselectBR2_PACKAGE_XLIB_LIBXEXTifBR2_PACKAGE_PROVIDES_LIBGLselectBR2_PACKAGE_XLIB_XORGPROTOifBR2_PACKAGE_PROVIDES_LIBGLselectBR2_PACKAGE_HAS_LIBGLifBR2_PACKAGE_PROVIDES_LIBGLif
BR2_PACKAGE_LIBGLVNDconfig
BR2_PACKAGE_PROVIDES_LIBGL
default "libglvnd" ifBR2_PACKAGE_HAS_LIBGLendif
and in libglvnd.mk:
ifeq ($(BR2_PACKAGE_PROVIDES_LIBGL),y) LIBGLVND_DEPENDENCIES += xlib_libXext xorgproto LIBGLVND_CONF_OPTS += -Dglx=enabled LIBGLVND_PROVIDES += libgl else LIBGLVND_CONF_OPTS += -Dglx=disabled endifQuoted 2 lines
OK, here is some vague idea for a possible solution:
- We introduce an intermediate "layer" between libgl and GL providers.[--SNIP--]
Quoted 3 lines
I *think* this would perhaps avoid that complexity in mesa3d... obviously for additional complexity in terms of how the virtual packages in GL world all work together.
You are reinventing libglvnd in between libglvnd and actual providers, no?
Also, remember that individual GL providers will still have to function as providers without libglvnd, which is not required.
But I would like we progress on the topic, and when we have a second candidate for libglvnd use, we can revisit the topic and see if we can over-engineer the thing.
Usually, we wait for three or four cases before trying to solve the problem in a generic fashion, and so I'd like to do here as well. Because so far, only two providers are known to work with libglvnd:
mewsa3d and nvidia. ATI might be a third one, but I have no clue about it. And in the SoC land, there is not much that is libglvnd compatible so far, if at all.
Quoted 2 lines
So, in the short-to-medium term, we'd at best have three providers. Is that enough to delve into a generic infra so far? Not sure...
I had an issue with a package (ogre) that now use OPENGL_glx_LIBRARY to find the "GLVND 'GLX' library"
https://github.com/OGRECave/ogre/commit/aa9ffa7a51e52cb714f1bf5a3a00b9ef9f5a7dc2
https://cmake.org/cmake/help/latest/module/FindOpenGL.html
I guess libglvnd will be required at some point.
Best regards,
Romain
Quoted 4 lines
Regards,
Yann E. MORIN.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Romain Naour
Tested-byRe: [Buildroot] [PATCH 2/2 v4] package/mesa3d: make it aware of libglvnd and support it when present
Le 03/01/2022 à 22:20, Romain Naour a écrit :
Quoted 112 lines
Hello Yann, Thomas,
Le 27/07/2020 à 19:35, Yann E. MORIN a écrit :
Quoted 106 lines
Thomas, All,
On 2020-07-27 17:38 +0200, Thomas Petazzoni spake thusly:
Quoted 9 lines
Quoted 7 lines · On Mon, 27 Jul 2020 10:47:02 +0200 "Yann E. MORIN" <[email protected]>…
From: Jakub Skrzypnik <[email protected]>
When libglvnd is enabled, mesa3d must be told so, so as it installs its libraries with the vendor suffix (e.g. libEGL_mesa.so instead of libEGL.so).
Additionally, the provider (in Buildroot parlance) is libglvnd, not mesa3d.
[--SNIP--]
Quoted 9 lines
package/mesa3d/Config.in comment "gbm support needs a dri driver or a gallium driver w/ EGL support." · line 426
Quoted 6 lines
config
BR2_PACKAGE_MESA3D_OPENGL_GLXpackage/mesa3d/Config.in +2
-1bool "OpenGL GLX" depends on BR2_PACKAGE_XORG7 - select BR2_PACKAGE_HAS_LIBGL + select BR2_PACKAGE_HAS_LIBGL if !BR2_PACKAGE_LIBGLVND + select BR2_PACKAGE_LIBGLVND_DISPATCH_GL if BR2_PACKAGE_LIBGLVNDI don't immediately see a good solution for this, but I find that solution to be quite annoying :-/
At first, I though so too, and I also looked for a better approach, but...
Quoted 4 lines
Indeed, I understand that once libglvnd is enabled, the GL-provider is libglvnd, which in the background is using mesa3d. The dance to handle libglvnd in mesa3d is already not nice, and we would have to have the same dance in other GL providers that support libglvnd.
Well, it is not _so_ bad. We could maybe make it a bit simpler, with:
config
BR2_PACKAGE_MESA3D_OPENGL_GLX
bool "OpenGL GLX"
selectBR2_PACKAGE_HAS_LIBGLWe still need to declare emsa3d as providing libgl depending on whether libglvnd is enabled, but we can make it a bit more "compact":
if !BR2_PACKAGE_LIBGLVND
config
BR2_PACKAGE_PROVIDES_LIBGL
default "mesa3d" ifBR2_PACKAGE_MESA3D_OPENGL_GLX[EGL and GLES too here]
endif
And in mesa3d.mk too:
ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_GLX),y) MESA3D_PROVIDES += $(if $(BR2_PACKAGE_LIBGLVND),,libgl) [...] endifBut now, in libglvnd, we don't need any extra symbol, we can just re-use
BR2_PACKAGE_PROVIDES_LIBGLet al.:config
BR2_PACKAGE_LIBGLVND
bool "libglvnd"
selectBR2_PACKAGE_XLIB_LIBX11ifBR2_PACKAGE_PROVIDES_LIBGLselectBR2_PACKAGE_XLIB_LIBXEXTifBR2_PACKAGE_PROVIDES_LIBGLselectBR2_PACKAGE_XLIB_XORGPROTOifBR2_PACKAGE_PROVIDES_LIBGLselectBR2_PACKAGE_HAS_LIBGLifBR2_PACKAGE_PROVIDES_LIBGLif
BR2_PACKAGE_LIBGLVNDconfig
BR2_PACKAGE_PROVIDES_LIBGL
default "libglvnd" ifBR2_PACKAGE_HAS_LIBGLendif
and in libglvnd.mk:
ifeq ($(BR2_PACKAGE_PROVIDES_LIBGL),y) LIBGLVND_DEPENDENCIES += xlib_libXext xorgproto LIBGLVND_CONF_OPTS += -Dglx=enabled LIBGLVND_PROVIDES += libgl else LIBGLVND_CONF_OPTS += -Dglx=disabled endifQuoted 2 lines
OK, here is some vague idea for a possible solution:
- We introduce an intermediate "layer" between libgl and GL providers.[--SNIP--]
Quoted 3 lines
I *think* this would perhaps avoid that complexity in mesa3d... obviously for additional complexity in terms of how the virtual packages in GL world all work together.
You are reinventing libglvnd in between libglvnd and actual providers, no?
Also, remember that individual GL providers will still have to function as providers without libglvnd, which is not required.
But I would like we progress on the topic, and when we have a second candidate for libglvnd use, we can revisit the topic and see if we can over-engineer the thing.
Usually, we wait for three or four cases before trying to solve the problem in a generic fashion, and so I'd like to do here as well. Because so far, only two providers are known to work with libglvnd:
mewsa3d and nvidia. ATI might be a third one, but I have no clue about it. And in the SoC land, there is not much that is libglvnd compatible so far, if at all.Quoted 2 lines
So, in the short-to-medium term, we'd at best have three providers. Is that enough to delve into a generic infra so far? Not sure...
Quoted 7 lines
I had an issue with a package (ogre) that now use
OPENGL_glx_LIBRARYto find the "GLVND 'GLX' library"https://github.com/OGRECave/ogre/commit/aa9ffa7a51e52cb714f1bf5a3a00b9ef9f5a7dc2
https://cmake.org/cmake/help/latest/module/FindOpenGL.htmlI guess libglvnd will be required at some point.
Actually I did a test using this series as is.
Best regards,
Romain
Quoted 10 lines
Best regards,
RomainQuoted 4 lines
Regards,
Yann E. MORIN.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 69 lines · Yann E. MORIN
Hello All!
This is a respin from the original series by Jakub, heavily massaged by me (Yann); thanks Jakub for your initial work! :-) What follows is Jakub's original cover letter (tweaked to drop the reference to other patches not include in this respin):
Here comes support for GLVND which is a GL Vendor-Neutral disaptches, initially proposed by NVidia, currently done within the Freedestop/ RedHat project team as libglvnd.
It's useful not only for NVidia (they were first to adopt it though) but might be also beneficial for others, for example allowing you to deliver an image running on multiple machines with different GPUs and their respective OpenGL providers, which happens quite often on
x86_64and was the major reason to implement it in Buildroot for me.On the other hand, if your board has multiple GPUs it also helps a lot
- for example when you have a "display" unit and "compute/accel" graphics units from different vendors. Happens on some ARM boards recently and there are already efforts to integrate it in these GL stacks.The only EXT needed by GL provider is to implement
GL_EXT_libglvndwhich is a dummy extension allowing GL lib to "register" to let it receive GL calls.In practive it's very simple, the libglvnd delivers its own set of "dummy" libraries:
- libGL.so
- libGLX.so
- libOpenGL.so
- libEGL.soand needs the actual providers to be present as they already are but with names like libGLX_nvidia.so.
It allows developers to link against vendor-neutral dummy libs and openGL contexts without thinking about target GPU too much as long as it supports desired GL/EGL standard.
Also delivers GL API headers (
GL/gl.h,GL/egl.h, etc.) so removes need of mesa3d-headers in GLVND-supported drivers.Currently it's supported by all Mesa-compatible drivers and NVidia. For simplicity sake, and to ease introduction of libglvnd, only mesa3d is converted to be compatible with libglvnd. Other providers, like NVidia, can be converted (or added!) in follow-up patches.
Changes v3 -> v4:
- bump to libglvnd 1.3.2Regards,
Yann E. MORIN.The following changes since commit
1640b0c1f967e394f87eb7a0ca04ae40aade11b4package/mbpfan: new package (2020-07-27 10:13:06 +0200)are available in the git repository at:
https://git.busybox.net/~ymorin/git/buildroot
for you to fetch changes up to
c48baa11cd0c06ec5af3fd4989306c3ec581d0e9
Quoted 7 lines
package/mesa3d: make it aware of libglvnd and support it when present (2020-07-27 10:45:34 +0200)
----------------------------------------------------------------
Jakub Skrzypnik (2):
package/libglvnd: new package
package/mesa3d: make it aware of libglvnd and support it when present
Series (finally) applied to master, thanks.
Jakub, I also added you to DEVELOPERS for the package.
Regards,
Arnout
Quoted 8 lines
package/Config.in | 1 + package/libglvnd/Config.in | 42 +++++++++++++++++++++++++++++++++ package/libglvnd/libglvnd.hash | 7 ++++++ package/libglvnd/libglvnd.mk | 53 ++++++++++++++++++++++++++++++++++++++++++ package/mesa3d/Config.in | 15 +++++++----- package/mesa3d/mesa3d.mk | 15 ++++++++---- 6 files changed, 123 insertions(+), 10 deletions(-)
Quoted 4 lines
create mode 100644 package/libglvnd/Config.in create mode 100644 package/libglvnd/libglvnd.hash create mode 100644
package/libglvnd/libglvnd.mk
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot