Skip to contentSkip to conversation

libv4l2: error dequeuing buf: Input/output error

DISCUSSION bifferos 2 participants 2 messages Nov 15, 2009 – Nov 16, 2009 Media (V4L/DVB)

lore
Share & tools
lore

bifferos

author
#0 lore raw

Hi all,

Can anyone give any clue as to why I might get this error when capturing from a PAC207 webcam? It happens after a 6-7 second delay when capturing.

I've seen this with 2.6.30.1, 2.6.30.5 and 2.6.32-rc7, however I can run the same camera on another (much faster) system using the same kernel(s) and same gspca driver and it works fine, making me think this is a timing issue.

I'm testing with the v4lgrab.c program, compiled statically against libv4l2. A quick google indicates I'm not the only one encountering the problem.

thanks,
Biff.

#1 lore raw

There have been some improvements to gspca_main and gspca_pac207 recently, as well as pac207 specific improvements in libv4l2. Are you using the latest v4l-dvb and libv4l2? I get some slowdown halfway when using capture-example.c and it seems to improve when I use the latest v4l-dvb and libv4l2 from mercurial. http://linuxtv.org/hg/v4l-dvb

Sean

Quoted 20 lines · bifferos

Hi all,

Can anyone give any clue as to why I might get this error when capturing from a PAC207 webcam? It happens after a 6-7 second delay when capturing.

I've seen this with 2.6.30.1, 2.6.30.5 and 2.6.32-rc7, however I can run the same camera on another (much faster) system using the same kernel(s) and same gspca driver and it works fine, making me think this is a timing issue.

I'm testing with the v4lgrab.c program, compiled statically against libv4l2. A quick google indicates I'm not the only one encountering the problem.

thanks,
Biff.

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html