HPET regression in 2.6.26 versus 2.6.25 -- found another user with the same regression
Quoted 69 lines · David Witbrodt
Quoted 7 lines
Quoted 5 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-Region 0: I/O ports at fa00 [size=16] Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: piix4_smbus00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old address from BIOS.
the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +9
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree */ + base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 );
drivers/pci/quirks.c DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_B · line 1939
Quoted 10 lines
drivers/pci/quirks.c +7
-0+if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); +dev_info (&dev->dev,"HPET at %04x-%04x\n" , name, base, base + size -1 ); + } +} +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_ATI ,0x3485 , quirk_hpet_in_bar); +#ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
Hi Yinghai,
Your patch seems to be broken, see :
Quoted 9 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function ‘quirk_hpet_in_bar’:drivers/pci/quirks.c:1804: erreur: ‘dev’ undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: ‘name’ undeclared (first use in this function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable ‘i’
make[2]: *** [drivers/pci/quirks.o] Erreur 1
Regards.
Quoted 86 lines · Rufus & Azrael
Quoted 81 lines
Quoted 7 lines · David Witbrodt
Quoted 5 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at fa00 [size=16]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +16
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree */ + base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); +dev_info (&dev->dev,"HPET at %04x-%04x\n" , name, base, base + size -1 ); + } +} +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_ATI ,0x3485 , quirk_hpet_in_bar); +#ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting Quoted 1 line
*
PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 15 lines
Your patch seems to be broken, see :
Quoted 12 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1
please check v2.
YH
[PATCH] x86: protect hpet in BAR for one ATI chipset v2
so avoid kernel don't allocate nre resource for it because it can not allocate the old address from BIOS.
the same way like some IO APIC address in BAR handling
--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/pci/quirks.c +16 -0
@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +u64 base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree */ + base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base && size) { +insert_resource (&iomem_resource, &pdev->resource[1 ]); +dev_info (&pdev->dev,"HPET at %08llx-%08llx\n" , base, base + size -1 ); + } +} +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_ATI ,0x3485 , quirk_hpet_in_bar); +#ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
Quoted 105 lines · Yinghai Lu
Quoted 85 lines · Rufus& Azrael
Quoted 80 lines
Quoted 7 lines · David Witbrodt
Quoted 5 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at fa00 [size=16]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again.
YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +16
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree */ + base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); +dev_info (&dev->dev,"HPET at %04x-%04x\n" , name, base, base + size -1 ); + } +} +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_ATI ,0x3485 , quirk_hpet_in_bar); +#ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting Quoted 2 lines
*
PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 16 lines
Your patch seems to be broken, see :
Quoted 13 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1
Quoted 4 lines
please check v2.
YH
Thanks Yinghai,
Your patch applied, I attach lspci -vvxxxx.
Regards.
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: ATI Technologies Inc RS690 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00: 02 10 10 79 06 00 20 22 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 10 79
30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 42 20 05 00
50: 02 10 10 79 00 00 00 00 00 00 00 00 00 00 00 00
60: 5f 00 00 00 00 00 00 00 00 02 20 00 a8 f8 01 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 40 43 00 00 95 00 00 03 20 05 10 00 03 26 00 00
90: 00 00 00 78 40 c4 40 e2 00 f0 00 08 01 00 00 00
a0: 00 00 00 00 00 00 00 00 07 01 00 00 49 01 10 07
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 08 00 94 01 60 00 11 11 d0 00 00 00
d0: 25 06 65 00 02 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 03 00 00 00 78 ff 7f
f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00: 02 10 12 79 07 01 30 02 00 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 d1 d1 20 02
20: 90 fe a0 fe 01 f0 f1 f7 00 00 00 00 00 00 00 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 12 00
40: 00 00 00 00 08 b0 03 a8 00 00 00 00 02 10 12 79
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0d 00 00 00 02 10 12 79 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 6, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 7910
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00: 02 10 17 79 07 01 10 00 00 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 e1 e1 00 00
20: b0 fe b0 fe f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 03 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 03 c8 00 00 00 00 10 80 41 01 20 80 00 00
60: 1f 08 00 00 11 0c 10 04 40 00 11 30 80 0c 30 00
70: c0 03 48 00 00 00 01 00 00 00 00 00 00 00 00 00
80: 05 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0d b8 00 00 02 10 10 79 08 00 03 a8 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: a5 00 00 00 10 22 21 20 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
100: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
110: 00 00 00 00 ff 00 00 80 00 00 00 00 00 80 00 00
120: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 01 00 01 00 00 00 00 00 00 00 00 00 30 20 06 00
150: 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
350: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device 7329
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
00: 02 10 80 43 07 01 30 02 00 01 06 01 10 40 00 00
10: 01 c0 00 00 01 b0 00 00 01 a0 00 00 01 90 00 00
20: 01 80 00 00 00 f8 8f fe 00 00 00 00 62 14 29 73
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
40: 10 00 80 02 01 00 10 00 01 00 00 00 00 00 00 00
50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 06 00 00 2c d6 01 b4 00 16 20 b4 00
90: 96 20 b4 00 56 20 b4 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00
b0: 00 00 00 00 00 78 00 00 00 00 00 00 00 78 00 00
c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00: 02 10 87 43 17 01 a0 02 00 10 03 0c 10 40 80 00
10: 00 e0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: 80 1f 00 00 0a 84 b7 18 07 35 00 00 00 00 00 00
50: 00 9c 00 00 00 00 00 00 00 22 33 44 77 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00: 02 10 88 43 17 01 a0 02 00 10 03 0c 10 40 00 00
10: 00 d0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00: 02 10 89 43 17 01 a0 02 00 10 03 0c 10 40 00 00
10: 00 c0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00: 02 10 8a 43 17 01 a0 02 00 10 03 0c 10 40 00 00
10: 00 b0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00: 02 10 8b 43 17 01 a0 02 00 10 03 0c 10 40 00 00
10: 00 a0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00: 02 10 86 43 17 01 b0 02 00 20 03 0c 10 40 00 00
10: 00 f0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 40 00 0e 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0f
80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device 7327 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: pata_atiixp
00: 02 10 8c 43 05 00 20 02 00 8a 01 01 00 40 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 ff 00 00 00 00 00 00 00 00 00 00 62 14 27 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 5d 20 00 00 ff 20 00 00 00 00 04 00 00 00 00 00 50: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00
10: 04 40 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 00 00 00
40: 00 00 02 00 00 00 00 00 00 00 00 00 01 00 00 00
50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 04 00 00 00 03 c0 c3 f7 07 ff 42 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 0e 00 00 0e 00 0f 00 f8 ff ff ff
70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00
80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 01 c0 fe 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: 02 10 84 43 05 01 a0 02 00 01 04 06 00 40 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 40 f0 00 80 22
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00
40: 26 00 0c ff 00 00 00 00 0c 01 3f d1 00 01 00 00
50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff
60: ca 0e 17 00 ba 18 10 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06
e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2f 0f 2c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 78 01 70 01 00 00 ff 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 00 f0 00 80 fe f7 00 00 00 00 00 00 00 00 00
a0: 03 00 e0 00 80 ff ef 00 03 00 80 00 00 ff df 00
b0: 03 0a 00 00 00 0b 00 00 03 ff f7 00 00 ff ff 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3f 78 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 05 00 00 00 00 00 00 00 34 c2 6a 5d 20 13 22 00
90: 10 0c 01 00 5a 00 50 67 10 00 00 80 31 00 00 00
a0: ef 02 00 5d 00 00 00 00 00 00 00 00 00 00 00 00
b0: 47 2f 05 2b b3 00 00 00 fa 8f 8a 80 2e 22 07 02
c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: e3 a8 c0 c7 62 5d 42 b8 1d 25 56 8a 50 8c 1c d1
e0: 60 3a a9 28 7b cb 1e f5 08 a3 b3 6a 24 29 8c 48
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 fb db 3a
60: f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 32 51 21 40 70 50 00 2a 00 08 17 21 00 00
80: 00 37 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 00 00 00 00 93 39 00 00 90 3a 4e b2 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 60 08 25 26 26 00
e0: 00 00 00 00 24 16 4d 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 04 00 00 02 00 00 00 33 0f 04 00
01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00: 02 10 1e 79 07 01 10 00 00 00 00 03 10 40 00 00
10: 0c 00 00 f0 00 00 00 00 04 00 af fe 00 00 00 00
20: 01 d0 00 00 00 00 90 fe 00 00 00 00 62 14 27 73
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
50: 01 80 02 06 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device 327c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data <?>
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-10-01
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
00: ec 10 36 81 07 01 10 00 01 00 00 02 10 00 00 00
10: 01 e8 00 00 00 00 00 00 04 f0 bf fe 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 7c 32
30: 00 00 bc fe 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 84 01 00 20 7f 00 00 00 00 1a 00 11 f4 03 00
70: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 41 0f 02 00 bb a0 0d 00 bd 09 00 00
a0: 02 28 ff 01 00 00 00 00 00 01 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
100: 01 00 c1 12 00 00 10 00 00 00 00 00 11 20 06 00
110: 00 00 00 00 00 00 00 00 14 00 00 00 01 00 00 04
120: 03 00 00 00 00 00 01 02 12 e7 cc 94 02 00 81 14
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: ff 00 00 80 00 00 00 00 03 00 41 15 36 81 ec 10
150: 00 00 10 01 04 00 01 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
350: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 04 00 01 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Quoted 146 lines · Rufus & Azrael
Quoted 116 lines · Yinghai Lu
Quoted 93 lines · Rufus& Azrael
Quoted 86 lines
Quoted 10 lines · David Witbrodt
Quoted 7 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at fa00 [size=16]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +16
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree */ + base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); +dev_info (&dev->dev,"HPET at %04x-%04x\n" , name, base, base + size -1 ); + } +} +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_ATI ,0x3485 , quirk_hpet_in_bar); +#ifdef CONFIG_PCI_MSI Quoted 3 lines
/* Some chipsets do not support MSI. We cannot easily rely on setting
*PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 18 lines
Your patch seems to be broken, see :
Quoted 15 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported
only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1Quoted 4 lines
please check v2.
YH
Thanks Yinghai,
Your patch applied, I attach lspci -vvxxxx.
Regards.
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0f
Quoted 8 lines
80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
bios didn't set HPET in BAR1?
YH
Quoted 158 lines · Yinghai Lu
Quoted 145 lines · Rufus& Azrael
Quoted 114 lines · Yinghai Lu
Quoted 91 lines · Rufus& Azrael
Quoted 84 lines
Quoted 9 lines · David Witbrodt
Quoted 6 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at fa00 [size=16]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +16
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree */ + base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); +dev_info (&dev->dev,"HPET at %04x-%04x\n" , name, base, base + size -1 ); + } +} +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_ATI ,0x3485 , quirk_hpet_in_bar); +#ifdef CONFIG_PCI_MSI Quoted 4 lines
/* Some chipsets do not support MSI. We cannot easily rely on setting
*PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 19 lines
Your patch seems to be broken, see :
Quoted 15 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported
only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1Quoted 5 lines
please check v2.
YH
Thanks Yinghai,
Your patch applied, I attach lspci -vvxxxx.
Regards.
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0fQuoted 9 lines
80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
Quoted 5 lines
bios didn't set HPET in BAR1?
YH
Yinghai,
How do I check this ?
Quoted 179 lines · Rufus & Azrael
Quoted 178 lines · Yinghai Lu
Quoted 162 lines · Rufus& Azrael
Quoted 128 lines · Yinghai Lu
Quoted 101 lines · Rufus& Azrael
Quoted 90 lines
Quoted 12 lines · David Witbrodt
Quoted 8 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-Region 0: I/O ports at fa00 [size=16] Region 1: Memory at 80000000 (32-bit, non-prefetchable)[size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +7
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree
*/drivers/pci/quirks.c +5
-0+ base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); + dev_info(&dev->dev, "HPET at %04x-%04x\n", name, base,base + size - 1);
drivers/pci/quirks.c +3
-0+ } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485,Quoted 7 lines
quirk_hpet_in_bar);
+
#ifdefCONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
*PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 21 lines
Your patch seems to be broken, see :
Quoted 17 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported
only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this
function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1Quoted 5 lines
please check v2.
YH
Thanks Yinghai,
Your patch applied, I attach lspci -vvxxxx.
Regards.
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0fQuoted 9 lines
80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01bios didn't set HPET in BAR1?
Quoted 8 lines
Quoted 3 lines
YH
Yinghai,
How do I check this ?
it seems that you BIOS have HPET in acpi tables, but didn't set that in BAR1 of 00:14.0
or BIOS have set one magic bit to hide BAR1 to OS.
please check if your hpet works. if so, we could have other quirks to hide BAR1 for David's system.
YH
Quoted 194 lines · Yinghai Lu
Quoted 178 lines · Rufus& Azrael
Quoted 176 lines · Yinghai Lu
Quoted 160 lines · Rufus& Azrael
Quoted 126 lines · Yinghai Lu
Quoted 99 lines · Rufus& Azrael
Quoted 88 lines
Quoted 11 lines · David Witbrodt
Quoted 7 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-Region 0: I/O ports at fa00 [size=16] Region 1: Memory at 80000000 (32-bit, non-prefetchable)[size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +7
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree
*/drivers/pci/quirks.c +5
-0+ base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); + dev_info(&dev->dev, "HPET at %04x-%04x\n", name, base,base + size - 1);
drivers/pci/quirks.c +3
-0+ } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485,Quoted 8 lines
quirk_hpet_in_bar);
+
#ifdefCONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
*PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 22 lines
Your patch seems to be broken, see :
Quoted 17 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported
only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this
function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1Quoted 6 lines
please check v2.
YH
Thanks Yinghai,
Your patch applied, I attach lspci -vvxxxx.
Regards.
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0fQuoted 10 lines
80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01bios didn't set HPET in BAR1?
Quoted 9 lines
Quoted 4 lines
YH
Yinghai,
How do I check this ?
it seems that you BIOS have HPET in acpi tables, but didn't set that in BAR1 of 00:14.0
Quoted 8 lines
or BIOS have set one magic bit to hide BAR1 to OS.
please check if your hpet works. if so, we could have other quirks to hide BAR1 for David's system.
YH
Yinghai,
I found these lines in dmesg :
Quoted 2 lines
[ 0.145977] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.145977] hpet0: 4 32-bit timers, 14318180 Hz
do you think hpet works ?
Regards.
Quoted 227 lines · Rufus & Azrael
Quoted 217 lines · Yinghai Lu
Quoted 199 lines · Rufus& Azrael
Quoted 196 lines · Yinghai Lu
Quoted 178 lines · Rufus& Azrael
Quoted 142 lines · Yinghai Lu
Quoted 110 lines · Rufus& Azrael
Quoted 97 lines
Quoted 14 lines · David Witbrodt
Quoted 9 lines
please send out after booting with hpet=disable
lspci -tv
lspci -vvxxxInfo attached:
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: Elitegroup Computer Systems Device 2621
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-Region 0: I/O ports at fa00 [size=16] Region 1: Memory at 80000000 (32-bit, non-prefetchable)[size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
it seems kernel update BAR1 from0xfed00000to0x80000000after it can
not give0xfed00000to that device.
please try attached patch, and send out lspci -vvxxxx again. YH
[PATCH] x86: protect hpet in BAR for one ATI chipsetso avoid kernel don't allocate nre resource for it because it can not
allocate the old
address from BIOS.the same way like some IO APIC address in BAR handling
Signed-off-by Yinghai Lu<[email protected]>--- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +7
-0@@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BPCI_DEVICE_ID_NX2_5709S , quirk_brcm_570x_limit_vpd); +static void __init quirk_hpet_in_bar (struct pci_dev *pdev) +{ +int i; +unsigned int base, size; + +/* the BAR1 is the location of the HPET...we must +* not touch this, so forcibly insert it into the resource tree
*/drivers/pci/quirks.c +5
-0+ base =pci_resource_start (pdev,1 ); + size =pci_resource_len (pdev,1 ); +if (base&& size) { +insert_resource (&iomem_resource,&pdev->resource[1 ]); + dev_info(&dev->dev, "HPET at %04x-%04x\n", name,base,
base + size - 1);drivers/pci/quirks.c +3
-0+ } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485,Quoted 9 lines
quirk_hpet_in_bar);
+
#ifdefCONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on
setting
*PCI_BUS_FLAGS_NO_MSIin its bus flags because there are actuallyHi Yinghai,
Quoted 25 lines
Your patch seems to be broken, see :
Quoted 20 lines
CC
drivers/pci/quirks.odrivers/pci/quirks.c: In function 'quirk_hpet_in_bar':drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this
function)drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is reported
only oncedrivers/pci/quirks.c:1804: erreur: for each function it appears in.)drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this
function)drivers/pci/quirks.c:1804: attention : trop d'arguments pour le formatdrivers/pci/quirks.c:1795: attention : unused variable 'i' make[2]: *** [drivers/pci/quirks.o] Erreur 1Quoted 6 lines
please check v2.
YH
Thanks Yinghai,
Your patch applied, I attach lspci -vvxxxx.
Regards.
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7327
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
<TAbort-<MAbort->SERR-<PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use:piix4_smbus
00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0fQuoted 10 lines
80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01bios didn't set HPET in BAR1?
Quoted 10 lines
Quoted 4 lines
YH
Yinghai,
How do I check this ?
it seems that you BIOS have HPET in acpi tables, but didn't set that in BAR1 of 00:14.0
Quoted 8 lines
or BIOS have set one magic bit to hide BAR1 to OS.
please check if your hpet works. if so, we could have other quirks to hide BAR1 for David's system.
YH
Quoted 9 lines
Yinghai,
I found these lines in dmesg :
Quoted 2 lines
[ 0.145977] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.145977] hpet0: 4 32-bit timers, 14318180 Hzdo you think hpet works ?
cat /proc/timer_list
YH
Quoted 2 lines · Yinghai Lu
cat
/proc/timer_list
see file attached.
Timer List Version: v0.3HRTIMER_MAX_CLOCK_BASES: 2
now at 3695974274663 nsecs
cpu: 0
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1219520062195573940 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <ffff88007365dd68>, tick_sched_timer, S:01
# expires at 3695975000000 nsecs [in 725337 nsecs] #1: <ffff88007365dd68>, hrtimer_wakeup, S:01 # expires at 3696440460527 nsecs [in 466185864 nsecs] .expires_next : 3695975000000 nsecs .hres_active : 1 .nr_events : 329999 .nohz_mode : 2 .idle_tick : 3695912000000 nsecs .tick_stopped : 0 .idle_jiffies : 4298363207 .idle_calls : 392104 .idle_sleeps : 112315 .idle_entrytime : 3695973392707 nsecs .idle_waketime : 3695911002655 nsecs .idle_exittime : 3695973261196 nsecs .idle_sleeptime : 3631485402358 nsecs .last_jiffies : 4298363269 .next_jiffies : 4298363307 .idle_expires : 3696011000000 nsecs jiffies: 4298363270
cpu: 1
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1219520062195573940 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <ffff88007365dd68>, tick_sched_timer, S:01
# expires at 3695975250000 nsecs [in 975337 nsecs] #1: <ffff88007365dd68>, it_real_fn, S:01 # expires at 3695993484129 nsecs [in 19209466 nsecs] #2: <ffff88007365dd68>, hrtimer_wakeup, S:01 # expires at 3696060447527 nsecs [in 86172864 nsecs] #3: <ffff88007365dd68>, hrtimer_wakeup, S:01 # expires at 3698989020182 nsecs [in 3014745519 nsecs] #4: <ffff88007365dd68>, hrtimer_wakeup, S:01 # expires at 3728638347527 nsecs [in 32664072864 nsecs] #5: <ffff88007365dd68>, hrtimer_wakeup, S:01 # expires at 3743417075015 nsecs [in 47442800352 nsecs] .expires_next : 3695975250000 nsecs .hres_active : 1 .nr_events : 386558 .nohz_mode : 2 .idle_tick : 3695954250000 nsecs .tick_stopped : 0 .idle_jiffies : 4298363250 .idle_calls : 589449 .idle_sleeps : 372520 .idle_entrytime : 3695974261463 nsecs .idle_waketime : 3695972715107 nsecs .idle_exittime : 3695972738574 nsecs .idle_sleeptime : 3526088161959 nsecs .last_jiffies : 4298363270 .next_jiffies : 4298363279 .idle_expires : 3696000000000 nsecs jiffies: 4298363270
Tick Device: mode: 1
Clock Event Device: hpet
max_delta_ns: 149983003520 min_delta_ns: 3352 mult: 61496115 shift: 32 mode: 3 next_event: 9223372036854775807 nsecs
set_next_event: hpet_legacy_next_event
set_mode: hpet_legacy_set_mode
event_handler: tick_handle_oneshot_broadcasttick_broadcast_mask: 00000000tick_broadcast_oneshot_mask: 00000000
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 672693290 min_delta_ns: 1202 mult: 53559019 shift: 32 mode: 3 next_event: 3695975000000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 672693290 min_delta_ns: 1202 mult: 53559019 shift: 32 mode: 3 next_event: 3695975250000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Quoted 7 lines · Rufus & Azrael
Quoted 3 lines · Yinghai Lu
cat
/proc/timer_listsee file attached.
..
Quoted 9 lines
Tick Device: mode: 1
Clock Event Device: hpetmax_delta_ns: 149983003520 min_delta_ns: 3352 mult: 61496115 shift: 32 mode: 3 next_event: 9223372036854775807 nsecs
Quoted 6 lines
set_next_event:hpet_legacy_next_event
set_mode:hpet_legacy_set_mode
event_handler:tick_handle_oneshot_broadcasttick_broadcast_mask: 00000000tick_broadcast_oneshot_mask: 00000000
thanks
so it works..., need to find out where is the magic bit.
YH
Quoted 26 lines · Yinghai Lu
Quoted 7 lines · Rufus & Azrael
Quoted 3 lines · Yinghai Lu
cat
/proc/timer_listsee file attached.
..
Quoted 9 lines
Tick Device: mode: 1
Clock Event Device: hpetmax_delta_ns: 149983003520 min_delta_ns: 3352 mult: 61496115 shift: 32 mode: 3 next_event: 9223372036854775807 nsecsQuoted 6 lines
set_next_event:hpet_legacy_next_event
set_mode:hpet_legacy_set_mode
event_handler:tick_handle_oneshot_broadcasttick_broadcast_mask: 00000000tick_broadcast_oneshot_mask: 00000000
Quoted 4 lines
thanks
so it works..., need to find out where is the magic bit.
Jordan, or others for AMD could access SB600
can you check ATI SB600 doc to produce one quirks patch to set the magic bit to hide 00:14.0 BAR1 to OS ?
Tthanks
Yinghai Lu
Quoted 27 lines · Yinghai Lu
Quoted 26 lines · Yinghai Lu
Quoted 7 lines · Rufus & Azrael
Quoted 3 lines · Yinghai Lu
cat
/proc/timer_listsee file attached.
..
Quoted 15 lines
Tick Device: mode: 1
Clock Event Device: hpetmax_delta_ns: 149983003520 min_delta_ns: 3352 mult: 61496115 shift: 32 mode: 3 next_event: 9223372036854775807 nsecs
set_next_event:hpet_legacy_next_event
set_mode:hpet_legacy_set_mode
event_handler:tick_handle_oneshot_broadcasttick_broadcast_mask: 00000000tick_broadcast_oneshot_mask: 00000000
Quoted 8 lines
Quoted 4 lines
thanks
so it works..., need to find out where is the magic bit.
Jordan, or others for AMD could access SB600
can you check ATI SB600 doc to produce one quirks patch to set the magic bit to hide 00:14.0 BAR1 to OS ?
Hi Yinghai - sorry, I've been away from my email for a few days. I know you resolved most of the problems, but a quirk patch to get rid of the BAR all together would be a good idea. I'll send something out following the US holiday.
Jordan
Signature · 3 lines
Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.
Quoted 3 lines · Yinghai Lu
Jordan, or others for AMD could access SB600
can you check ATI SB600 doc to produce one quirks patch to set the magic bit to hide 00:14.0 BAR1 to OS ?
I know this is a very late reply, but
is there still a quirk desired to hide BAR1 of SB600 SMBus device?
If yes, I'll provide a patch asap.
Regards,
Andreas
Quoted 9 lines · Andreas Herrmann
Quoted 3 lines · Yinghai Lu
Jordan, or others for AMD could access SB600
can you check ATI SB600 doc to produce one quirks patch to set the magic bit to hide 00:14.0 BAR1 to OS ?I know this is a very late reply, but
is there still a quirk desired to hide BAR1 of SB600 SMBus device?If yes, I'll provide a patch asap.
I sent one up last week, but it was overshadowed by the much more serious R790 problem that Linus and Rafael was looking at. I have re-attached the patch for posterity.
Thanks,
Jordan
Signature · 3 lines
Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.
[PATCH]: SB600 - remove HPET resources from PCI device
From: Jordan Crouse <[email protected]>
Prevent the HPET resources from appearing in PCI device 14.0 which confuses the PCI resource engine.
---
arch/x86/pci/fixup.c | 27 +++++++++++++++++++++++++++ 1 files changed, 27 insertions(+), 0 deletions(-)
arch/x86/pci/fixup.c +27 -0
@@ -511,3 +511,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,0x1202 , fam10h_pci_cfg_space_size);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,0x1203 , fam10h_pci_cfg_space_size);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,0x1204 , fam10h_pci_cfg_space_size); + +/* SB600: Disable BAR1 on device 14.0 to avoid HPET resources from +* confusing the PCI engine */ + +static void sb600_disable_hpet_bar (struct pci_dev *dev) +{ +u8 val; + +/* The SB600 and SB700 both share the same device +* ID, but the PM register 0x55 does something different +* for the SB700, so make sure we are dealing with the +* SB600 before touching the bit. +*/ + +pci_read_config_byte (dev,0x08 , &val); + +if (val <0x2F ) { +outb (0x55 ,0xCD6 ); + val =inb (0xCD7 ); + +/* Set bit 7 in PM register 0x55 */ +outb (0x55 ,0xCD6 ); +outb (val |0x80 ,0xCD7 ); + } +} + +DECLARE_PCI_FIXUP_EARLY (PCI_VENDOR_ID_ATI ,0x4385 , sb600_disable_hpet_bar);
Quoted 6 lines · Jordan Crouse
Quoted 5 lines · Andreas Herrmann
Quoted 3 lines · Yinghai Lu
Jordan, or others for AMD could access SB600
can you check ATI SB600 doc to produce one quirks patch to set the magic bit to hide 00:14.0 BAR1 to OS ?
Quoted 8 lines
Quoted 4 lines
I know this is a very late reply, but
is there still a quirk desired to hide BAR1 of SB600 SMBus device?If yes, I'll provide a patch asap.
I sent one up last week, but it was overshadowed by the much more serious R790 problem that Linus and Rafael was looking at. I have re-attached the patch for posterity.
i think that quirk still makes sense (even with a perfect PCI resources engine it gets rid of a debug warning), i've applied it to tip/timers/hpet. Thanks Jordan,
Ingo