qla2xxx: Add EDIF support
Subsystems (2)
Nilesh Javali
maintainerv4 cover qla2xxx: Add EDIF support
Martin,
Please apply the EDIF support feature to the scsi tree at your earliest convenience.
v4:
Reword subject line for patch 10/11.
v3:
- Incorporate the review comments.
- Enable recently added heartbeat validation for EDIF.
v2:
Split the EDIF support feature into logical commits for better readability.
Thanks,
Nilesh
Nilesh Javali (1):
qla2xxx: Update version to 10.02.00.107-k
Quinn Tran (10):
qla2xxx: Add start + stop bsg's
qla2xxx: Add getfcinfo and statistic bsg's
qla2xxx: Add send, receive and accept for auth_els
qla2xxx: Add extraction of auth_els from the wire
qla2xxx: Add key update
qla2xxx: Add authentication pass + fail bsg's
qla2xxx: Add detection of secure device
qla2xxx: Add doorbell notification for app
qla2xxx: Add encryption to IO path
qla2xxx: Increment EDIF command and completion counts
drivers/scsi/qla2xxx/Makefile | 3 +- drivers/scsi/qla2xxx/qla_attr.c | 5 + drivers/scsi/qla2xxx/qla_bsg.c | 90 +- drivers/scsi/qla2xxx/qla_bsg.h | 3 + drivers/scsi/qla2xxx/qla_dbg.h | 1 + drivers/scsi/qla2xxx/qla_def.h | 195 +- drivers/scsi/qla2xxx/qla_edif.c | 3409 +++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_edif.h | 128 + drivers/scsi/qla2xxx/qla_edif_bsg.h | 220 ++ drivers/scsi/qla2xxx/qla_fw.h | 12 +- drivers/scsi/qla2xxx/qla_gbl.h | 50 +- drivers/scsi/qla2xxx/qla_gs.c | 6 +- drivers/scsi/qla2xxx/qla_init.c | 168 +- drivers/scsi/qla2xxx/qla_iocb.c | 69 +- drivers/scsi/qla2xxx/qla_isr.c | 320 ++- drivers/scsi/qla2xxx/qla_mbx.c | 33 +- drivers/scsi/qla2xxx/qla_mid.c | 7 +- drivers/scsi/qla2xxx/qla_nvme.c | 4 + drivers/scsi/qla2xxx/qla_os.c | 101 +- drivers/scsi/qla2xxx/qla_target.c | 145 +- drivers/scsi/qla2xxx/qla_target.h | 19 +- drivers/scsi/qla2xxx/qla_version.h | 4 +- 22 files changed, 4845 insertions(+), 147 deletions(-) create mode 100644 drivers/scsi/qla2xxx/qla_edif.c create mode 100644 drivers/scsi/qla2xxx/qla_edif.h create mode 100644 drivers/scsi/qla2xxx/qla_edif_bsg.h
base-commit: 041761f4a4db662e38b4ae9d510b8beb24c7d4b6
prerequisite-patch-id: 62258e2861a8064d0d7fc3ea4efbf71758054bde
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 1/11 qla2xxx: Add start + stop bsg's
From: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
This patch add 2 new BSG calls:QL_VND_SC_APP_START: application will announce its present to driver with this call. Driver will restart all connections to see if remote device support security or not.
QL_VND_SC_APP_STOP: application announce it's in the process of exiting. Driver will restart all connections to revert back to non-secure. Provided the remote device is willing to allow a non-secure connection.
--- drivers/scsi/qla2xxx/Makefile | 3 +- drivers/scsi/qla2xxx/qla_bsg.c | 3 + drivers/scsi/qla2xxx/qla_bsg.h | 3 + drivers/scsi/qla2xxx/qla_dbg.h | 1 + drivers/scsi/qla2xxx/qla_def.h | 70 ++++-- drivers/scsi/qla2xxx/qla_edif.c | 356 ++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_edif.h | 33 +++ drivers/scsi/qla2xxx/qla_edif_bsg.h | 220 +++++++++++++++++ drivers/scsi/qla2xxx/qla_gbl.h | 4 + 9 files changed, 669 insertions(+), 24 deletions(-) create mode 100644 drivers/scsi/qla2xxx/qla_edif.c create mode 100644 drivers/scsi/qla2xxx/qla_edif.h create mode 100644 drivers/scsi/qla2xxx/qla_edif_bsg.h
drivers/scsi/qla2xxx/Makefile +2 -1
@@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \ qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o \ - qla_nx.o qla_mr.o qla_nx2.o qla_target.o qla_tmpl.o qla_nvme.o + qla_nx.o qla_mr.o qla_nx2.o qla_target.o qla_tmpl.o qla_nvme.o \ + qla_edif.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o obj-$(CONFIG_TCM_QLA2XXX) += tcm_qla2xxx.o
drivers/scsi/qla2xxx/qla_bsg.c +3 -0
@@ -2840,6 +2840,9 @@ qla2x00_process_vendor_specific(struct bsg_job *bsg_job)case QL_VND_DPORT_DIAGNOSTICS :return qla2x00_do_dport_diagnostics (bsg_job); +case QL_VND_EDIF_MGMT : +return qla_edif_app_mgmt (bsg_job); +case QL_VND_SS_GET_FLASH_IMAGE_STATUS :return qla2x00_get_flash_image_status (bsg_job);
drivers/scsi/qla2xxx/qla_bsg.h +3 -0
@@ -31,6 +31,7 @@#define QL_VND_DPORT_DIAGNOSTICS 0x19#define QL_VND_GET_PRIV_STATS_EX 0x1A#define QL_VND_SS_GET_FLASH_IMAGE_STATUS 0x1E +#define QL_VND_EDIF_MGMT 0X1F#define QL_VND_MANAGE_HOST_STATS 0x23#define QL_VND_GET_HOST_STATS 0x24#define QL_VND_GET_TGT_STATS 0x25
@@ -294,4 +295,6 @@ struct qla_active_regions { uint8_t reserved[32]; } __packed; +#include "qla_edif_bsg.h" +#endif
drivers/scsi/qla2xxx/qla_dbg.h +1 -0
@@ -367,6 +367,7 @@ ql_log_qp(uint32_t, struct qla_qpair *, int32_t, const char *fmt, ...);#define ql_dbg_tgt_mgt 0x00002000/* Target mode management */ #define ql_dbg_tgt_tmr 0x00001000/* Target mode task management */ #define ql_dbg_tgt_dif 0x00000800/* Target mode dif */ +#define ql_dbg_edif 0x00000400/* edif and purex debug */ extern int qla27xx_dump_mpi_ram (struct qla_hw_data *,uint32_t ,uint32_t *,uint32_t ,void **);
drivers/scsi/qla2xxx/qla_def.h +47 -23
124 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_edif.c new file +356 -0
356 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_edif.h new file +33 -0
@@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Marvell Fibre Channel HBA Driver +* Copyright (c) 2021 Marvell +*/ +#ifndef __QLA_EDIF_H +#define __QLA_EDIF_H + +struct qla_scsi_host ; +#define EDIF_APP_ID 0x73730001 + +enum enode_flags_t { +ENODE_ACTIVE =0x1 , +}; + +struct pur_core { +enum enode_flags_t enode_flags; +spinlock_t pur_lock; +struct list_head head; +}; + +enum db_flags_t { +EDB_ACTIVE =0x1 , +}; + +struct edif_dbell { +enum db_flags_t db_flags; +spinlock_t db_lock; +struct list_head head; +struct completion dbell; +}; + +#endif /* __QLA_EDIF_H */
drivers/scsi/qla2xxx/qla_edif_bsg.h new file +220 -0
220 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_gbl.h +4 -0
@@ -950,6 +950,10 @@ extern void qla_nvme_abort_process_comp_status/* nvme.c */ void qla_nvme_unregister_remote_port (struct fc_port *fcport); +void qla_edb_stop (scsi_qla_host_t *vha); +int32_t qla_edif_app_mgmt (struct bsg_job *bsg_job); +void qla_enode_init (scsi_qla_host_t *vha); +void qla_enode_stop (scsi_qla_host_t *vha);void qla_handle_els_plogi_done (scsi_qla_host_t *vha,struct event_arg *ea);#define QLA2XX_HW_ERROR BIT_0
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 2/11 qla2xxx: Add getfcinfo and statistic bsg's
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
This patch add 2 new BSG calls:QL_VND_SC_GET_FCINFO: Application from time to time can request for a list of all FC ports or a single device that support secure connection. If driver sees a new or old device has came onto the switch, this call is used to check for the WWPN.
QL_VND_SC_GET_STATS: Application request for various statistic count of each FC port.
--- drivers/scsi/qla2xxx/qla_def.h | 3 +- drivers/scsi/qla2xxx/qla_edif.c | 188 ++++++++++++++++++++++++++++++++ 2 files changed, 190 insertions(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_def.h +2 -1
@@ -2576,10 +2576,11 @@ typedef struct fc_port { uint32_t app_sess_online:1;uint32_t tx_rekey_cnt;uint32_t rx_rekey_cnt; -/* delayed rx delete data structure list */ uint64_t tx_bytes;uint64_t rx_bytes;uint8_t non_secured_login; +uint8_t auth_state; +uint16_t rekey_cnt; } edif; } fc_port_t;
drivers/scsi/qla2xxx/qla_edif.c +188 -0
200 lines not on this page · raw message
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 3/11 qla2xxx: Add send, receive and accept for auth_els
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
This patch add ability for authentication application to send and retrieve message(s) as part of the authentication process via existing FC_BSG_HST_ELS_NOLOGIN BSG interface
To send a message, application is expected to format the data in the AUTH ELS format. Refer to FC-SP2 for details.
If a message was received, application is required to reply with either a LS_ACC or LS_RJT complete the exchange using the same interface. Otherwise, remote device will treat it as a timeout.
--- drivers/scsi/qla2xxx/qla_attr.c | 1 + drivers/scsi/qla2xxx/qla_bsg.c | 63 +++-- drivers/scsi/qla2xxx/qla_def.h | 48 ++++ drivers/scsi/qla2xxx/qla_edif.c | 396 ++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_edif.h | 34 +++ drivers/scsi/qla2xxx/qla_gbl.h | 6 +- drivers/scsi/qla2xxx/qla_iocb.c | 41 ++++ drivers/scsi/qla2xxx/qla_isr.c | 95 ++++++- drivers/scsi/qla2xxx/qla_os.c | 41 ++++ drivers/scsi/qla2xxx/qla_target.c | 7 +- 10 files changed, 692 insertions(+), 40 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +1 -0
@@ -3107,6 +3107,7 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)qla2x00_wait_for_sess_deletion (vha);qla_nvme_delete (vha); +qla_enode_stop (vha); vha->flags.delete_progress =1 ;qlt_remove_target (ha, vha);
drivers/scsi/qla2xxx/qla_bsg.c +39 -24
95 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_def.h +48 -0
87 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_edif.c +396 -0
428 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_edif.h +34 -0
@@ -30,4 +30,38 @@ struct edif_dbell { struct completion dbell; }; +#define MAX_PAYLOAD 1024 +#define PUR_GET 1 + +struct dinfo { +int nodecnt; +int lstate; +}; + +struct pur_ninfo { +unsigned int pur_pend:1 ; +port_id_t pur_sid; +port_id_t pur_did; +uint8_t vp_idx; +short pur_bytes_rcvd; +unsigned short pur_nphdl; +unsigned int pur_rx_xchg_address; +}; + +struct purexevent { +struct pur_ninfo pur_info; +unsigned char *msgp; +u32 msgp_len; +}; + +#define N_UNDEF 0 +#define N_PUREX 1 +struct enode { +struct list_head list; +struct dinfo dinfo; +uint32_t ntype; +union { +struct purexevent purexinfo; + } u; +};#endif /* __QLA_EDIF_H */
drivers/scsi/qla2xxx/qla_gbl.h +5 -1
@@ -130,6 +130,8 @@ void qla24xx_free_purex_item(struct purex_item *item);extern bool qla24xx_risc_firmware_invalid (uint32_t *);void qla_init_iocb_limit (scsi_qla_host_t *); +int qla_edif_process_els (scsi_qla_host_t *vha,struct bsg_job *bsgjob); +const char *sc_to_str (uint16_t cmd);/* * Global Data in qla_os.c source file.
@@ -280,7 +282,8 @@ extern int qla2x00_vp_abort_isp(scsi_qla_host_t *);/* * Global Function Prototypes in qla_iocb.c source file. */ - +void qla_els_pt_iocb (struct scsi_qla_host *vha, +struct els_entry_24xx *pkt,struct qla_els_pt_arg *a);extern uint16_t qla2x00_calc_iocbs_32 (uint16_t );extern uint16_t qla2x00_calc_iocbs_64 (uint16_t );extern void qla2x00_build_scsi_iocbs_32 (srb_t *,cmd_entry_t *,uint16_t );
@@ -950,6 +953,7 @@ extern void qla_nvme_abort_process_comp_status/* nvme.c */ void qla_nvme_unregister_remote_port (struct fc_port *fcport); +fc_port_t *qla2x00_find_fcport_by_pid (scsi_qla_host_t *vha,port_id_t *id);void qla_edb_stop (scsi_qla_host_t *vha);int32_t qla_edif_app_mgmt (struct bsg_job *bsg_job);void qla_enode_init (scsi_qla_host_t *vha);
drivers/scsi/qla2xxx/qla_iocb.c +41 -0
53 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_isr.c +84 -11
134 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_os.c +41 -0
73 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_target.c +3 -4
@@ -184,8 +184,7 @@ static inline int qlt_issue_marker(struct scsi_qla_host *vha, int vha_locked)return QLA_SUCCESS ; } -static inline -struct scsi_qla_host *qlt_find_host_by_d_id (struct scsi_qla_host *vha, +struct scsi_qla_host *qla_find_host_by_d_id (struct scsi_qla_host *vha,be_id_t d_id) {struct scsi_qla_host *host;
@@ -299,7 +298,7 @@ static void qlt_try_to_dequeue_unknown_atios(struct scsi_qla_host *vha, goto abort; } - host =qlt_find_host_by_d_id (vha, u->atio.u.isp24.fcp_hdr.d_id); + host =qla_find_host_by_d_id (vha, u->atio.u.isp24.fcp_hdr.d_id);if (host !=NULL ) {ql_dbg (ql_dbg_async + ql_dbg_verbose, vha,0x502f ,"Requeuing unknown ATIO_TYPE7 %p\n" , u);
@@ -348,7 +347,7 @@ static bool qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *vha,switch (atio->u.raw.entry_type) {case ATIO_TYPE7 : { -struct scsi_qla_host *host =qlt_find_host_by_d_id (vha, +struct scsi_qla_host *host =qla_find_host_by_d_id (vha, atio->u.isp24.fcp_hdr.d_id);if (unlikely (NULL == host)) { ql_dbg(ql_dbg_tgt, vha, 0xe03e,
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 4/11 qla2xxx: Add extraction of auth_els from the wire
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
This patch is a continuation of previous patch where authentication messages sent from remote device has arrived. Each message is extracted and placed in a buffer for application to retrieve. The FC frame header will be stripped leaving behind the AUTH ELS payload. It is up to the application to strip the AUTH ELS header to get to the actual authentication message.
--- drivers/scsi/qla2xxx/qla_def.h | 2 +- drivers/scsi/qla2xxx/qla_edif.c | 184 ++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_gbl.h | 7 +- drivers/scsi/qla2xxx/qla_isr.c | 212 ++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_os.c | 11 +- drivers/scsi/qla2xxx/qla_target.c | 36 +++-- 6 files changed, 427 insertions(+), 25 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +1 -1
@@ -3908,7 +3908,6 @@ struct qlt_hw_data {int num_act_qpairs;#define DEFAULT_NAQP 2spinlock_t atio_lock____cacheline_aligned ; -struct btree_head32 host_map; };#define MAX_QFULL_CMDS_ALLOC 8192
@@ -4684,6 +4683,7 @@ struct qla_hw_data {pci_error_state_t pci_error_state;u64 prev_cmd_cnt;struct dma_pool *purex_dma_pool; +struct btree_head32 host_map;struct els_reject elsrej; };
drivers/scsi/qla2xxx/qla_edif.c +184 -0
202 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_gbl.h +6 -1
@@ -581,6 +581,7 @@ qla2xxx_msix_rsp_q_hs(int irq, void *dev_id);fc_port_t *qla2x00_find_fcport_by_loopid (scsi_qla_host_t *,uint16_t );fc_port_t *qla2x00_find_fcport_by_wwpn (scsi_qla_host_t *,u8 *,u8 );fc_port_t *qla2x00_find_fcport_by_nportid (scsi_qla_host_t *,port_id_t *,u8 ); +void __qla_consume_iocb (struct scsi_qla_host *vha,void **pkt,struct rsp_que **rsp);/* * Global Function Prototypes in qla_sup.c source file.
@@ -643,6 +644,8 @@ extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);extern void qla2xxx_flash_npiv_conf (scsi_qla_host_t *);extern int qla24xx_read_fcp_prio_cfg (scsi_qla_host_t *); +int __qla_copy_purex_to_buffer (struct scsi_qla_host *vha,void **pkt, +struct rsp_que **rsp,u8 *buf,u32 buf_len);/* * Global Function Prototypes in qla_dbg.c source file.
@@ -926,6 +929,7 @@ extern int qla_set_exchoffld_mem_cfg(scsi_qla_host_t *);extern void qlt_handle_abts_recv (struct scsi_qla_host *,struct rsp_que *,response_t *); +struct scsi_qla_host *qla_find_host_by_d_id (struct scsi_qla_host *vha,be_id_t d_id);int qla24xx_async_notify_ack (scsi_qla_host_t *,fc_port_t *,struct imm_ntfy_from_isp *,int );void qla24xx_do_nack_work (struct scsi_qla_host *,struct qla_work_evt *);
@@ -938,7 +942,7 @@ extern struct fc_port *qlt_find_sess_invalidate_other(scsi_qla_host_t *,void qla24xx_delete_sess_fn (struct work_struct *);void qlt_unknown_atio_work_fn (struct work_struct *);void qlt_update_host_map (struct scsi_qla_host *,port_id_t ); -void qlt_remove_target_resources (struct qla_hw_data *); +void qla_remove_hostmap (struct qla_hw_data *ha);void qlt_clr_qp_table (struct scsi_qla_host *vha);void qlt_set_mode (struct scsi_qla_host *);int qla2x00_set_data_rate (scsi_qla_host_t *vha,uint16_t mode);
@@ -958,6 +962,7 @@ void qla_edb_stop(scsi_qla_host_t *vha);int32_t qla_edif_app_mgmt (struct bsg_job *bsg_job);void qla_enode_init (scsi_qla_host_t *vha);void qla_enode_stop (scsi_qla_host_t *vha); +void qla24xx_auth_els (scsi_qla_host_t *vha,void **pkt,struct rsp_que **rsp);void qla_handle_els_plogi_done (scsi_qla_host_t *vha,struct event_arg *ea);#define QLA2XX_HW_ERROR BIT_0
drivers/scsi/qla2xxx/qla_isr.c +212 -0
236 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_os.c +9 -2
@@ -3797,7 +3797,6 @@ qla2x00_remove_one(struct pci_dev *pdev)qla2x00_free_sysfs_attr (base_vha, true);fc_remove_host (base_vha->host); -qlt_remove_target_resources (ha);scsi_remove_host (base_vha->host);
@@ -3974,15 +3973,20 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, struct req_que **req, struct rsp_que **rsp) { char name[16]; +int rc; ha->init_cb =dma_alloc_coherent (&ha->pdev->dev, ha->init_cb_size, &ha->init_cb_dma,GFP_KERNEL );if (!ha->init_cb) goto fail; -if (qlt_mem_alloc (ha) <0 ) + rc =btree_init32 (&ha->host_map); +if (rc) goto fail_free_init_cb; +if (qlt_mem_alloc (ha) <0 ) + goto fail_free_btree; + ha->gid_list =dma_alloc_coherent (&ha->pdev->dev,qla2x00_gid_list_size (ha), &ha->gid_list_dma,GFP_KERNEL );if (!ha->gid_list)
@@ -4386,6 +4390,8 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, ha->gid_list_dma =0 ; fail_free_tgt_mem:qlt_mem_free (ha); +fail_free_btree: +btree_destroy32 (&ha->host_map); fail_free_init_cb:dma_free_coherent (&ha->pdev->dev, ha->init_cb_size, ha->init_cb, ha->init_cb_dma);
@@ -4802,6 +4808,7 @@ qla2x00_mem_free(struct qla_hw_data *ha) ha->dif_bundl_pool =NULL ;qlt_mem_free (ha); +qla_remove_hostmap (ha);if (ha->init_cb) dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
drivers/scsi/qla2xxx/qla_target.c +15 -21
@@ -197,7 +197,7 @@ struct scsi_qla_host *qla_find_host_by_d_id(struct scsi_qla_host *vha, key =be_to_port_id (d_id).b24; - host =btree_lookup32 (&vha->hw->tgt.host_map, key); + host =btree_lookup32 (&vha->hw->host_map, key);if (!host)ql_dbg (ql_dbg_tgt_mgt + ql_dbg_verbose, vha,0xf005 ,"Unable to find host %06x\n" , key);
@@ -6441,15 +6441,15 @@ int qlt_remove_target(struct qla_hw_data *ha, struct scsi_qla_host *vha)return 0 ; } -void qlt_remove_target_resources (struct qla_hw_data *ha) +void qla_remove_hostmap (struct qla_hw_data *ha) {struct scsi_qla_host *node;u32 key =0 ; -btree_for_each_safe32 (&ha->tgt.host_map, key, node) -btree_remove32 (&ha->tgt.host_map, key); +btree_for_each_safe32 (&ha->host_map, key, node) +btree_remove32 (&ha->host_map, key); -btree_destroy32 (&ha->tgt.host_map); +btree_destroy32 (&ha->host_map); } static void qlt_lport_dump(struct scsi_qla_host *vha, u64 wwpn,
@@ -7077,8 +7077,7 @@ qlt_modify_vp_config(struct scsi_qla_host *vha,void qlt_probe_one_stage1 (struct scsi_qla_host *base_vha,struct qla_hw_data *ha) { -int rc; - +mutex_init (&base_vha->vha_tgt.tgt_mutex);if (!QLA_TGT_MODE_ENABLED ())return ;
@@ -7091,7 +7090,6 @@ qlt_probe_one_stage1(struct scsi_qla_host *base_vha, struct qla_hw_data *ha)ISP_ATIO_Q_OUT (base_vha) = &ha->iobase->isp24.atio_q_out; } -mutex_init (&base_vha->vha_tgt.tgt_mutex);mutex_init (&base_vha->vha_tgt.tgt_host_action_mutex);INIT_LIST_HEAD (&base_vha->unknown_atio_list);
@@ -7100,11 +7098,6 @@ qlt_probe_one_stage1(struct scsi_qla_host *base_vha, struct qla_hw_data *ha)qlt_clear_mode (base_vha); - rc =btree_init32 (&ha->tgt.host_map); -if (rc) -ql_log (ql_log_info, base_vha,0xd03d , -"Unable to initialize ha->host_map btree\n" ); -qlt_update_vp_map (base_vha,SET_VP_IDX ); }
@@ -7225,21 +7218,20 @@ qlt_update_vp_map(struct scsi_qla_host *vha, int cmd)u32 key;int rc; -if (!QLA_TGT_MODE_ENABLED ()) -return ; - key = vha->d_id.b24;switch (cmd) {case SET_VP_IDX : +if (!QLA_TGT_MODE_ENABLED ()) +return ; vha->hw->tgt.tgt_vp_map[vha->vp_idx].vha = vha;break ;case SET_AL_PA : - slot =btree_lookup32 (&vha->hw->tgt.host_map, key); + slot =btree_lookup32 (&vha->hw->host_map, key);if (!slot) {ql_dbg (ql_dbg_tgt_mgt, vha,0xf018 ,"Save vha in host_map %p %06x\n" , vha, key); - rc =btree_insert32 (&vha->hw->tgt.host_map, + rc =btree_insert32 (&vha->hw->host_map, key, vha,GFP_ATOMIC );if (rc) ql_log(ql_log_info, vha, 0xd03e,
@@ -7249,17 +7241,19 @@ qlt_update_vp_map(struct scsi_qla_host *vha, int cmd) }ql_dbg (ql_dbg_tgt_mgt, vha,0xf019 ,"replace existing vha in host_map %p %06x\n" , vha, key); -btree_update32 (&vha->hw->tgt.host_map, key, vha); +btree_update32 (&vha->hw->host_map, key, vha);break ;case RESET_VP_IDX : +if (!QLA_TGT_MODE_ENABLED ()) +return ; vha->hw->tgt.tgt_vp_map[vha->vp_idx].vha =NULL ;break ;case RESET_AL_PA :ql_dbg (ql_dbg_tgt_mgt, vha,0xf01a ,"clear vha in host_map %p %06x\n" , vha, key); - slot =btree_lookup32 (&vha->hw->tgt.host_map, key); + slot =btree_lookup32 (&vha->hw->host_map, key);if (slot) -btree_remove32 (&vha->hw->tgt.host_map, key); +btree_remove32 (&vha->hw->host_map, key); vha->d_id.b24 =0 ;break ; }
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 5/11 qla2xxx: Add key update
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
As part of the authentication process, the authentication application will generate a SADB entry (Security Association/SA, key, SPI value, etc). This SADB is then pass to driver to be programmed into hardware. There will be a pair of SADB's (Tx and Rx) for each connection.
After some period, the application can choose to change the key. At that time, a new set of SADB pair is given to driver. The old set of SADB will be deleted.
This patch add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow add | delete of SADB. Driver will not keep the key in memory. It will pass it to HW.
It is assume that application will assign a unique SPI value to this SADB(SA + key). Driver + HW will assign a handle to track this unique SPI/SADB.
--- drivers/scsi/qla2xxx/qla_def.h | 69 ++ drivers/scsi/qla2xxx/qla_edif.c | 1480 ++++++++++++++++++++++++++++- drivers/scsi/qla2xxx/qla_edif.h | 61 ++ drivers/scsi/qla2xxx/qla_fw.h | 1 + drivers/scsi/qla2xxx/qla_gbl.h | 21 + drivers/scsi/qla2xxx/qla_init.c | 10 + drivers/scsi/qla2xxx/qla_iocb.c | 6 + drivers/scsi/qla2xxx/qla_isr.c | 8 + drivers/scsi/qla2xxx/qla_os.c | 17 + drivers/scsi/qla2xxx/qla_target.h | 2 +- 10 files changed, 1668 insertions(+), 7 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +69 -0
@@ -401,6 +401,7 @@ struct srb_cmd {#define SRB_CRC_CTX_DSD_VALID BIT_5/* DIF: dsd_list valid */ #define SRB_WAKEUP_ON_COMP BIT_6#define SRB_DIF_BUNDL_DMA_VALID BIT_7/* DIF: DMA list valid */ +#define SRB_EDIF_CLEANUP_DELETE BIT_9/* To identify if a srb is of T10-CRC type. @sp => srb_t pointer */ #define IS_PROT_IO (sp) (sp->flags & SRB_CRC_CTX_DSD_VALID)
@@ -595,6 +596,10 @@ struct srb_iocb {u16 cmd;u16 vp_index; } ctrlvp; +struct { +struct edif_sa_ctl *sa_ctl; +struct qla_sa_update_frame sa_frame; + } sa_update; } u;struct timer_list timer;
@@ -2616,7 +2621,12 @@ typedef struct fc_port { uint32_t app_stop:2; uint32_t app_started:1; uint32_t secured_login:1; + uint32_t aes_gmac:1; uint32_t app_sess_online:1; + uint32_t tx_sa_set:1; + uint32_t rx_sa_set:1; + uint32_t tx_sa_pending:1; + uint32_t rx_sa_pending:1;uint32_t tx_rekey_cnt;uint32_t rx_rekey_cnt;uint64_t tx_bytes;
@@ -2624,6 +2634,12 @@ typedef struct fc_port {uint8_t non_secured_login;uint8_t auth_state;uint16_t rekey_cnt; +struct list_head edif_indx_list; +spinlock_t indx_list_lock; + +struct list_head tx_sa_list; +struct list_head rx_sa_list; +spinlock_t sa_list_lock; } edif; } fc_port_t;
@@ -2679,6 +2695,7 @@ static const char * const port_dstate_str[] = {#define FCF_CONF_COMP_SUPPORTED BIT_4#define FCF_ASYNC_ACTIVE BIT_5#define FCF_FCSP_DEVICE BIT_6 +#define FCF_EDIF_DELETE BIT_7/* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000
@@ -3449,6 +3466,7 @@ enum qla_work_type {QLA_EVT_SP_RETRY ,QLA_EVT_IIDMA ,QLA_EVT_ELS_PLOGI , + QLA_EVT_SA_REPLACE, };
@@ -3507,6 +3525,11 @@ struct qla_work_evt {u8 fc4_type;srb_t *sp; } gpnft; +struct { +struct edif_sa_ctl *sa_ctl; +fc_port_t *fcport; +uint16_t nport_handle; + } sa_update; } u; };
@@ -4684,6 +4707,16 @@ struct qla_hw_data {u64 prev_cmd_cnt;struct dma_pool *purex_dma_pool;struct btree_head32 host_map; + +#define EDIF_NUM_SA_INDEX 512 +#define EDIF_TX_SA_INDEX_BASE EDIF_NUM_SA_INDEX +void *edif_rx_sa_id_map; +void *edif_tx_sa_id_map; +spinlock_t sadb_fp_lock; + +struct list_head sadb_tx_index_list; +struct list_head sadb_rx_index_list; +spinlock_t sadb_lock;/* protects list */ struct els_reject elsrej; };
@@ -5160,7 +5193,43 @@ enum nexus_wait_type { WAIT_LUN, }; +#define INVALID_EDIF_SA_INDEX 0xffff +#define RX_DELETE_NO_EDIF_SA_INDEX 0xfffe +#define QLA_SKIP_HANDLE QLA_TGT_SKIP_HANDLE + +/* edif hash element */ +struct edif_list_entry { +uint16_t handle;/* nport_handle */ +uint32_t update_sa_index; +uint32_t delete_sa_index; +uint32_t count;/* counter for filtering sa_index */ +#define EDIF_ENTRY_FLAGS_CLEANUP 0x01/* this index is being cleaned up */ +uint32_t flags;/* used by sadb cleanup code */ +fc_port_t *fcport;/* needed by rx delay timer function */ +struct timer_list timer;/* rx delay timer */ +struct list_head next; +}; + +#define EDIF_TX_INDX_BASE 512 +#define EDIF_RX_INDX_BASE 0 +#define EDIF_RX_DELETE_FILTER_COUNT 3/* delay queuing rx delete until this many */ + +/* entry in the sa_index free pool */ + +struct sa_index_pair { +uint16_t sa_index; +uint32_t spi; +}; + +/* edif sa_index data structure */ +struct edif_sa_index_entry { +struct sa_index_pair sa_pair[2 ]; +fc_port_t *fcport; +uint16_t handle; +struct list_head next; +}; +/* Refer to SNIA SFF 8247 */ struct sff_8247_a0 {u8 txid;/* transceiver id */
drivers/scsi/qla2xxx/qla_edif.c +1474 -6
1,537 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_edif.h +61 -0
73 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_fw.h +1 -0
@@ -611,6 +611,7 @@ struct sts_entry_24xx {union {__le16 reserved_1;__le16 nvme_rsp_pyld_len; +__le16 edif_sa_index;/* edif sa_index used for initiator read data */ };__le16 state_flags;/* State flags. */
drivers/scsi/qla2xxx/qla_gbl.h +21 -0
@@ -130,6 +130,13 @@ void qla24xx_free_purex_item(struct purex_item *item);extern bool qla24xx_risc_firmware_invalid (uint32_t *);void qla_init_iocb_limit (scsi_qla_host_t *); +void qla_edif_sadb_release (struct qla_hw_data *ha); +int qla_edif_sadb_build_free_pool (struct qla_hw_data *ha); +void qla_edif_sadb_release_free_pool (struct qla_hw_data *ha); +void qla_chk_edif_rx_sa_delete_pending (scsi_qla_host_t *vha, +srb_t *sp,struct sts_entry_24xx *sts24); +void qlt_chk_edif_rx_sa_delete_pending (scsi_qla_host_t *vha,fc_port_t *fcport, +struct ctio7_from_24xx *ctio);int qla_edif_process_els (scsi_qla_host_t *vha,struct bsg_job *bsgjob);const char *sc_to_str (uint16_t cmd);
@@ -238,6 +245,8 @@ void qla24xx_process_purex_rdp(struct scsi_qla_host *vha, struct purex_item *pkt);void qla_pci_set_eeh_busy (struct scsi_qla_host *);void qla_schedule_eeh_work (struct scsi_qla_host *); +struct edif_sa_ctl *qla_edif_find_sa_ctl_by_index (fc_port_t *fcport, +int index,int dir);/* * Global Functions in qla_mid.c source file.
@@ -313,6 +322,8 @@ extern int qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *, srb_t *, struct dsd64 *, uint16_t, struct qla_tgt_cmd *);extern int qla24xx_get_one_block_sg (uint32_t ,struct qla2_sgx *,uint32_t *);extern int qla24xx_configure_prot_mode (srb_t *,uint16_t *); +extern int qla24xx_issue_sa_replace_iocb (scsi_qla_host_t *vha, +struct qla_work_evt *e);/* * Global Function Prototypes in qla_mbx.c source file.
@@ -885,6 +896,9 @@ extern int qla2x00_issue_iocb_timeout(scsi_qla_host_t *, void *, dma_addr_t, size_t, uint32_t);extern int qla2x00_get_idma_speed (scsi_qla_host_t *,uint16_t ,uint16_t *,uint16_t *); +extern int qla24xx_sadb_update (struct bsg_job *bsg_job); +extern int qla_post_sa_replace_work (struct scsi_qla_host *vha, +fc_port_t *fcport,uint16_t nport_handle,struct edif_sa_ctl *sa_ctl);/* 83xx related functions */ void qla83xx_fw_dump (scsi_qla_host_t *vha);
@@ -957,12 +971,19 @@ extern void qla_nvme_abort_process_comp_status/* nvme.c */ void qla_nvme_unregister_remote_port (struct fc_port *fcport); + +/* qla_edif.c */ fc_port_t *qla2x00_find_fcport_by_pid (scsi_qla_host_t *vha,port_id_t *id);void qla_edb_stop (scsi_qla_host_t *vha);int32_t qla_edif_app_mgmt (struct bsg_job *bsg_job);void qla_enode_init (scsi_qla_host_t *vha);void qla_enode_stop (scsi_qla_host_t *vha); +void qla_edif_flush_sa_ctl_lists (fc_port_t *fcport); +void qla24xx_sa_update_iocb (srb_t *sp,struct sa_update_28xx *sa_update_iocb); +void qla24xx_sa_replace_iocb (srb_t *sp,struct sa_update_28xx *sa_update_iocb);void qla24xx_auth_els (scsi_qla_host_t *vha,void **pkt,struct rsp_que **rsp); +void qla28xx_sa_update_iocb_entry (scsi_qla_host_t *vha,struct req_que *req, +struct sa_update_28xx *pkt);void qla_handle_els_plogi_done (scsi_qla_host_t *vha,struct event_arg *ea);#define QLA2XX_HW_ERROR BIT_0
drivers/scsi/qla2xxx/qla_init.c +10 -0
@@ -5071,6 +5071,16 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)INIT_LIST_HEAD (&fcport->sess_cmd_list);spin_lock_init (&fcport->sess_cmd_lock); +spin_lock_init (&fcport->edif.sa_list_lock); +INIT_LIST_HEAD (&fcport->edif.tx_sa_list); +INIT_LIST_HEAD (&fcport->edif.rx_sa_list); + +if (vha->e_dbell.db_flags ==EDB_ACTIVE ) + fcport->edif.app_started =1 ; + +spin_lock_init (&fcport->edif.indx_list_lock); +INIT_LIST_HEAD (&fcport->edif.edif_indx_list); +return fcport; }
drivers/scsi/qla2xxx/qla_iocb.c +6 -0
@@ -3892,6 +3892,12 @@ qla2x00_start_sp(srb_t *sp)case SRB_PRLO_CMD :qla24xx_prlo_iocb (sp, pkt);break ; +case SRB_SA_UPDATE : +qla24xx_sa_update_iocb (sp, pkt); +break ; +case SRB_SA_REPLACE : +qla24xx_sa_replace_iocb (sp, pkt); +break ;default :break ; }
drivers/scsi/qla2xxx/qla_isr.c +8 -0
@@ -3191,6 +3191,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) sp->qpair->cmd_completion_cnt++;/* Fast path completion. */ +qla_chk_edif_rx_sa_delete_pending (vha, sp, sts24); +if (comp_status ==CS_COMPLETE && scsi_status ==0 ) {qla2x00_process_completed_request (vha, req, handle);
@@ -3585,6 +3587,7 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt) }break ; +case SA_UPDATE_IOCB_TYPE :case ABTS_RESP_24XX :case CTIO_TYPE7 :case CTIO_CRC2 :
@@ -3883,6 +3886,11 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, purex_entry->els_frame_payload[3]); }break ; +case SA_UPDATE_IOCB_TYPE : +qla28xx_sa_update_iocb_entry (vha, rsp->req, + (struct sa_update_28xx *)pkt); +break ; +default :/* Type Not Supported. */ ql_dbg(ql_dbg_async, vha, 0x5042,
drivers/scsi/qla2xxx/qla_os.c +17 -0
@@ -2835,6 +2835,17 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)spin_lock_init (&ha->tgt.sess_lock);spin_lock_init (&ha->tgt.atio_lock); +spin_lock_init (&ha->sadb_lock); +INIT_LIST_HEAD (&ha->sadb_tx_index_list); +INIT_LIST_HEAD (&ha->sadb_rx_index_list); + +spin_lock_init (&ha->sadb_fp_lock); + +if (qla_edif_sadb_build_free_pool (ha)) { +kfree (ha); + goto disable_device; + } +atomic_set (&ha->nvme_active_aen_cnt,0 );/* Clear our data area */
@@ -3868,6 +3879,9 @@ qla2x00_free_device(scsi_qla_host_t *vha)qla82xx_md_free (vha); +qla_edif_sadb_release_free_pool (ha); +qla_edif_sadb_release (ha); +qla2x00_free_queues (ha); }
@@ -5375,6 +5389,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)qla24xx_els_dcmd2_iocb (vha,ELS_DCMD_PLOGI , e->u.fcport.fcport, false);break ; +case QLA_EVT_SA_REPLACE : +qla24xx_issue_sa_replace_iocb (vha, e); +break ; }if (rc ==EAGAIN ) {
drivers/scsi/qla2xxx/qla_target.h +1 -1
@@ -446,7 +446,7 @@ struct ctio7_from_24xx {uint8_t vp_index;uint8_t reserved1[5 ];__le32 exchange_address; -__le16 reserved2; +__le16 edif_sa_index;__le16 flags;__le32 residual;__le16 ox_id;
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 6/11 qla2xxx: Add authentication pass + fail bsg's
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
On completion of the authentication process, the authentication application will notify driver on whether it is successful or not.
If success, application will use the QL_VND_SC_AUTH_OK BSG call to tell driver to proceed to the PRLI phase.
If fail, application will use the QL_VND_SC_AUTH_FAIL bsg call to tell driver to tear down the connection and retry. In the case where an existing session is active, the re-key process can fail. The session tear down ensure data is not further compromise.
--- drivers/scsi/qla2xxx/qla_edif.c | 213 +++++++++++++++++++++++++++++++- drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 3 +- 3 files changed, 209 insertions(+), 8 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +207 -6
@@ -656,6 +656,204 @@ qla_edif_app_stop(scsi_qla_host_t *vha, struct bsg_job *bsg_job)return rval; } +static int +qla_edif_app_chk_sa_update (scsi_qla_host_t *vha,fc_port_t *fcport, +struct app_plogi_reply *appplogireply) +{ +int ret =0 ; + +if (!(fcport->edif.rx_sa_set && fcport->edif.tx_sa_set)) { +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s: wwpn %8phC Both SA indexes has not been SET TX %d, RX %d.\n" , + __func__, fcport->port_name, fcport->edif.tx_sa_set, + fcport->edif.rx_sa_set); + appplogireply->prli_status =0 ; + ret =1 ; + }else { +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s wwpn %8phC Both SA(s) updated.\n" , __func__, + fcport->port_name); + fcport->edif.rx_sa_set = fcport->edif.tx_sa_set =0 ; + fcport->edif.rx_sa_pending = fcport->edif.tx_sa_pending =0 ; + appplogireply->prli_status =1 ; + } +return ret; +} + +/** +* qla_edif_app_authok - authentication by app succeeded. Driver can proceed +* with prli +* @vha: host adapter pointer +* @bsg_job: user request +*/ +static int +qla_edif_app_authok (scsi_qla_host_t *vha,struct bsg_job *bsg_job) +{ +int32_t rval =0 ; +struct auth_complete_cmd appplogiok; +struct app_plogi_reply appplogireply = {0 }; +struct fc_bsg_reply *bsg_reply = bsg_job->reply; +fc_port_t *fcport =NULL ; +port_id_t portid = {0 }; + +sg_copy_to_buffer (bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, &appplogiok, +sizeof (struct auth_complete_cmd )); + +switch (appplogiok.type) { +case PL_TYPE_WWPN : + fcport =qla2x00_find_fcport_by_wwpn (vha, + appplogiok.u.wwpn,0 ); +if (!fcport) +ql_dbg (ql_dbg_edif, vha,0x911d , +"%s wwpn lookup failed: %8phC\n" , + __func__, appplogiok.u.wwpn); +break ; +case PL_TYPE_DID : + fcport =qla2x00_find_fcport_by_pid (vha, &appplogiok.u.d_id); +if (!fcport) +ql_dbg (ql_dbg_edif, vha,0x911d , +"%s d_id lookup failed: %x\n" , __func__, + portid.b24); +break ; +default : +ql_dbg (ql_dbg_edif, vha,0x911d , +"%s undefined type: %x\n" , __func__, + appplogiok.type); +break ; + } + +if (!fcport) { +SET_DID_STATUS (bsg_reply->result,DID_ERROR ); + goto errstate_exit; + } + +/* +* if port is online then this is a REKEY operation +* Only do sa update checking +*/ +if (atomic_read (&fcport->state) ==FCS_ONLINE ) { +ql_dbg (ql_dbg_edif, vha,0x911d , +"%s Skipping PRLI complete based on rekey\n" , __func__); + appplogireply.prli_status =1 ; +SET_DID_STATUS (bsg_reply->result,DID_OK ); +qla_edif_app_chk_sa_update (vha, fcport, &appplogireply); + goto errstate_exit; + } + +/* make sure in AUTH_PENDING or else reject */ +if (fcport->disc_state !=DSC_LOGIN_AUTH_PEND ) { +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s wwpn %8phC is not in auth pending state (%x)\n" , + __func__, fcport->port_name, fcport->disc_state); +SET_DID_STATUS (bsg_reply->result,DID_OK ); + appplogireply.prli_status =0 ; + goto errstate_exit; + } + +SET_DID_STATUS (bsg_reply->result,DID_OK ); + appplogireply.prli_status =1 ; +if (!(fcport->edif.rx_sa_set && fcport->edif.tx_sa_set)) { +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s: wwpn %8phC Both SA indexes has not been SET TX %d, RX %d.\n" , + __func__, fcport->port_name, fcport->edif.tx_sa_set, + fcport->edif.rx_sa_set); +SET_DID_STATUS (bsg_reply->result,DID_OK ); + appplogireply.prli_status =0 ; + goto errstate_exit; + + }else { +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s wwpn %8phC Both SA(s) updated.\n" , __func__, + fcport->port_name); + fcport->edif.rx_sa_set = fcport->edif.tx_sa_set =0 ; + fcport->edif.rx_sa_pending = fcport->edif.tx_sa_pending =0 ; + } + +if (qla_ini_mode_enabled (vha)) { +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s AUTH complete - RESUME with prli for wwpn %8phC\n" , + __func__, fcport->port_name); +qla_edif_reset_auth_wait (fcport,DSC_LOGIN_PEND ,1 ); +qla24xx_post_prli_work (vha, fcport); + } + +errstate_exit: + bsg_job->reply_len =sizeof (struct fc_bsg_reply ); +sg_copy_from_buffer (bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, &appplogireply, +sizeof (struct app_plogi_reply )); + +return rval; +} + +/** +* qla_edif_app_authfail - authentication by app has failed. Driver is given +* notice to tear down current session. +* @vha: host adapter pointer +* @bsg_job: user request +*/ +static int +qla_edif_app_authfail (scsi_qla_host_t *vha,struct bsg_job *bsg_job) +{ +int32_t rval =0 ; +struct auth_complete_cmd appplogifail; +struct fc_bsg_reply *bsg_reply = bsg_job->reply; +fc_port_t *fcport =NULL ; +port_id_t portid = {0 }; + +ql_dbg (ql_dbg_edif, vha,0x911d ,"%s app auth fail\n" , __func__); + +sg_copy_to_buffer (bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, &appplogifail, +sizeof (struct auth_complete_cmd )); + +/* +* TODO: edif: app has failed this plogi. Inform driver to +* take any action (if any). +*/ +switch (appplogifail.type) { +case PL_TYPE_WWPN : + fcport =qla2x00_find_fcport_by_wwpn (vha, + appplogifail.u.wwpn,0 ); +SET_DID_STATUS (bsg_reply->result,DID_OK ); +break ; +case PL_TYPE_DID : + fcport =qla2x00_find_fcport_by_pid (vha, &appplogifail.u.d_id); +if (!fcport) +ql_dbg (ql_dbg_edif, vha,0x911d , +"%s d_id lookup failed: %x\n" , __func__, + portid.b24); +SET_DID_STATUS (bsg_reply->result,DID_OK ); +break ; +default : +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s undefined type: %x\n" , __func__, + appplogifail.type); + bsg_job->reply_len =sizeof (struct fc_bsg_reply ); +SET_DID_STATUS (bsg_reply->result,DID_ERROR ); + rval =-1 ; +break ; + } + +ql_dbg (ql_dbg_edif, vha,0x911d , +"%s fcport is 0x%p\n" , __func__, fcport); + +if (fcport) { +/* set/reset edif values and flags */ +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s reset the auth process - %8phC, loopid=%x portid=%06x.\n" , + __func__, fcport->port_name, fcport->loop_id, fcport->d_id.b24); + +if (qla_ini_mode_enabled (fcport->vha)) { + fcport->send_els_logo =1 ; +qla_edif_reset_auth_wait (fcport,DSC_LOGIN_PEND ,0 ); + } + } + +return rval; +} +/** * qla_edif_app_getfcinfo - app would like to read session info (wwpn, nportid, * [initiator|target] mode. It can specific session with specific nport id or
@@ -697,8 +895,7 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job) tdid = app_req.remote_pid;ql_dbg (ql_dbg_edif, vha,0x2058 , -"APP request entry - portid=%06x.\n" , - tdid.b24); +"APP request entry - portid=%06x.\n" , tdid.b24);/* Ran out of space */ if (pcnt > app_req.num_ports)
@@ -719,10 +916,8 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job) app_reply->ports[pcnt].remote_pid = fcport->d_id;ql_dbg (ql_dbg_edif, vha,0x2058 , -"Found FC_SP fcport - nn %8phN pn %8phN pcnt %d portid=%02x%02x%02x.\n" , - fcport->node_name, fcport->port_name, pcnt, - fcport->d_id.b.domain, fcport->d_id.b.area, - fcport->d_id.b.al_pa); +"Found FC_SP fcport - nn %8phN pn %8phN pcnt %d portid=%06x\n" , + fcport->node_name, fcport->port_name, pcnt, fcport->d_id.b24);switch (fcport->edif.auth_state) {case VND_CMD_AUTH_STATE_ELS_RCVD :
@@ -888,6 +1083,12 @@ qla_edif_app_mgmt(struct bsg_job *bsg_job)case QL_VND_SC_APP_STOP : rval =qla_edif_app_stop (vha, bsg_job);break ; +case QL_VND_SC_AUTH_OK : + rval =qla_edif_app_authok (vha, bsg_job); +break ; +case QL_VND_SC_AUTH_FAIL : + rval =qla_edif_app_authfail (vha, bsg_job); +break ;case QL_VND_SC_GET_FCINFO : rval =qla_edif_app_getfcinfo (vha, bsg_job);break ;
drivers/scsi/qla2xxx/qla_gbl.h +1 -0
@@ -12,6 +12,7 @@* Global Function Prototypes in qla_init.c source file. */ extern int qla2x00_initialize_adapter (scsi_qla_host_t *); +extern int qla24xx_post_prli_work (struct scsi_qla_host *vha,fc_port_t *fcport);extern int qla2100_pci_config (struct scsi_qla_host *);extern int qla2300_pci_config (struct scsi_qla_host *);
drivers/scsi/qla2xxx/qla_init.c +1 -2
@@ -34,7 +34,6 @@ static int qla2x00_restart_isp(scsi_qla_host_t *);static struct qla_chip_state_84xx *qla84xx_get_chip (struct scsi_qla_host *);static int qla84xx_init_chip (scsi_qla_host_t *);static int qla25xx_init_queues (struct qla_hw_data *); -static int qla24xx_post_prli_work (struct scsi_qla_host *,fc_port_t *);static void qla24xx_handle_gpdb_event (scsi_qla_host_t *vha,struct event_arg *ea); static void qla24xx_handle_prli_done_event(struct scsi_qla_host *,
@@ -1191,7 +1190,7 @@ static void qla24xx_async_gpdb_sp_done(srb_t *sp, int res) sp->free (sp); } -static int qla24xx_post_prli_work (struct scsi_qla_host *vha,fc_port_t *fcport) +int qla24xx_post_prli_work (struct scsi_qla_host *vha,fc_port_t *fcport) {struct qla_work_evt *e;
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 7/11 qla2xxx: Add detection of secure device
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
At this time, there is no FC switch scan service that indicate a device is secure or non-secure.
In order to detect whether the remote port support secured or not, driver must first do a PLOGI with the remote device. On completion of the PLOGI, driver will query FW to see if the device supports secure login. To do that, driver + FW must advertise the security bit via PLOGI's service parameter. The remote device shall respond with the same service parameter bit on whether it supports it or not.
--- drivers/scsi/qla2xxx/qla_def.h | 5 +- drivers/scsi/qla2xxx/qla_edif.c | 31 +++++++ drivers/scsi/qla2xxx/qla_fw.h | 8 +- drivers/scsi/qla2xxx/qla_gbl.h | 3 + drivers/scsi/qla2xxx/qla_gs.c | 4 + drivers/scsi/qla2xxx/qla_init.c | 141 +++++++++++++++++++++++++----- drivers/scsi/qla2xxx/qla_iocb.c | 17 +++- drivers/scsi/qla2xxx/qla_isr.c | 4 + drivers/scsi/qla2xxx/qla_mbx.c | 6 ++ drivers/scsi/qla2xxx/qla_mid.c | 7 +- drivers/scsi/qla2xxx/qla_os.c | 19 ++++ drivers/scsi/qla2xxx/qla_target.c | 61 ++++++++++++- drivers/scsi/qla2xxx/qla_target.h | 1 + 13 files changed, 279 insertions(+), 28 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +4 -1
@@ -492,6 +492,7 @@ struct srb_iocb {#define SRB_LOGIN_SKIP_PRLI BIT_2#define SRB_LOGIN_NVME_PRLI BIT_3#define SRB_LOGIN_PRLI_ONLY BIT_4 +#define SRB_LOGIN_FCSP BIT_5uint16_t data[2 ];u32 iop[2 ]; } logio;
@@ -2343,6 +2344,7 @@ struct imm_ntfy_from_isp {__le16 nport_handle;uint16_t reserved_2;__le16 flags; +#define NOTIFY24XX_FLAGS_FCSP BIT_5#define NOTIFY24XX_FLAGS_GLOBAL_TPRLO BIT_1#define NOTIFY24XX_FLAGS_PUREX_IOCB BIT_0__le16 srr_rx_id;
@@ -2682,7 +2684,8 @@ static const char * const port_dstate_str[] = {"UPD_FCPORT" ,"LOGIN_COMPLETE" ,"ADISC" , - "DELETE_PEND" +"DELETE_PEND" , + "LOGIN_AUTH_PEND", };/*
drivers/scsi/qla2xxx/qla_edif.c +31 -0
@@ -2366,6 +2366,26 @@ qla28xx_sa_update_iocb_entry(scsi_qla_host_t *v, struct req_que *req, sp->done (sp,0 ); } +/********************************************** +* edif update/delete sa_index list functions * +**********************************************/ + +/* clear the edif_indx_list for this port */ +void qla_edif_list_del (fc_port_t *fcport) +{ +struct edif_list_entry *indx_lst; +struct edif_list_entry *tindx_lst; +struct list_head *indx_list = &fcport->edif.edif_indx_list; +unsigned long flags =0 ; + +spin_lock_irqsave (&fcport->edif.indx_list_lock, flags); +list_for_each_entry_safe (indx_lst, tindx_lst, indx_list, next) { +list_del (&indx_lst->next); +kfree (indx_lst); + } +spin_unlock_irqrestore (&fcport->edif.indx_list_lock, flags); +} +/****************** * SADB functions * ******************/
@@ -2791,3 +2811,14 @@ int qla_edif_process_els(scsi_qla_host_t *vha, struct bsg_job *bsg_job) done:return rval; } + +void qla_edif_sess_down (struct scsi_qla_host *vha,struct fc_port *sess) +{ +if (sess->edif.app_sess_online && vha->e_dbell.db_flags &EDB_ACTIVE ) { +ql_dbg (ql_dbg_disc, vha,0xf09c , +"%s: sess %8phN send port_offline event\n" , + __func__, sess->port_name); + sess->edif.app_sess_online =0 ; +qla2x00_post_aen_work (vha,FCH_EVT_PORT_OFFLINE , sess->d_id.b24); + } +}
drivers/scsi/qla2xxx/qla_fw.h +6 -2
@@ -82,10 +82,11 @@ struct port_database_24xx {uint8_t port_name[WWN_SIZE ];uint8_t node_name[WWN_SIZE ]; -uint8_t reserved_3[4 ]; +uint8_t reserved_3[2 ]; +uint16_t nvme_first_burst_size;uint16_t prli_nvme_svc_param_word_0;/* Bits 15-0 of word 0 */ uint16_t prli_nvme_svc_param_word_3;/* Bits 15-0 of word 3 */ -uint16_t nvme_first_burst_size; +uint8_t secure_login;uint8_t reserved_4[14 ]; };
@@ -897,6 +898,7 @@ struct logio_entry_24xx {#define LCF_FCP2_OVERRIDE BIT_9/* Set/Reset word 3 of PRLI. */ #define LCF_CLASS_2 BIT_8/* Enable class 2 during PLOGI. */ #define LCF_FREE_NPORT BIT_7/* Release NPORT handle after LOGO. */ +#define LCF_COMMON_FEAT BIT_7/* PLOGI - Set Common Features Field */ #define LCF_EXPL_LOGO BIT_6/* Perform an explicit LOGO. */ #define LCF_NVME_PRLI BIT_6/* Perform NVME FC4 PRLI */ #define LCF_SKIP_PRLI BIT_5/* Skip PRLI after PLOGI. */
@@ -921,6 +923,8 @@ struct logio_entry_24xx {uint8_t rsp_size;/* Response size in 32bit words. */ __le32 io_parameter[11 ];/* General I/O parameters. */ +#define LIO_COMM_FEAT_FCSP BIT_21 +#define LIO_COMM_FEAT_CIO BIT_31#define LSC_SCODE_NOLINK 0x01#define LSC_SCODE_NOIOCB 0x02#define LSC_SCODE_NOXCB 0x03
drivers/scsi/qla2xxx/qla_gbl.h +3 -0
@@ -131,6 +131,7 @@ void qla24xx_free_purex_item(struct purex_item *item);extern bool qla24xx_risc_firmware_invalid (uint32_t *);void qla_init_iocb_limit (scsi_qla_host_t *); +void qla_edif_list_del (fc_port_t *fcport);void qla_edif_sadb_release (struct qla_hw_data *ha);int qla_edif_sadb_build_free_pool (struct qla_hw_data *ha);void qla_edif_sadb_release_free_pool (struct qla_hw_data *ha);
@@ -138,7 +139,9 @@ void qla_chk_edif_rx_sa_delete_pending(scsi_qla_host_t *vha, srb_t *sp, struct sts_entry_24xx *sts24);void qlt_chk_edif_rx_sa_delete_pending (scsi_qla_host_t *vha,fc_port_t *fcport,struct ctio7_from_24xx *ctio); +void qla2x00_release_all_sadb (struct scsi_qla_host *vha,struct fc_port *fcport);int qla_edif_process_els (scsi_qla_host_t *vha,struct bsg_job *bsgjob); +void qla_edif_sess_down (struct scsi_qla_host *vha,struct fc_port *sess);const char *sc_to_str (uint16_t cmd);/*
drivers/scsi/qla2xxx/qla_gs.c +4 -0
@@ -2826,6 +2826,10 @@ void qla24xx_handle_gpsc_event(scsi_qla_host_t *vha, struct event_arg *ea)if (fcport->disc_state ==DSC_DELETE_PEND )return ; +/* We will figure-out what happen after AUTH completes */ +if (fcport->disc_state ==DSC_LOGIN_AUTH_PEND ) +return ; +if (ea->sp->gen2 != fcport->login_gen) {/* target side must have changed it. */ ql_dbg(ql_dbg_disc, vha, 0x20d3,
drivers/scsi/qla2xxx/qla_init.c +119 -22
224 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_iocb.c +16 -1
@@ -2466,6 +2466,12 @@ qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio) logio->control_flags |=cpu_to_le16 (LCF_COND_PLOGI );if (lio->u.logio.flags &SRB_LOGIN_SKIP_PRLI ) logio->control_flags |=cpu_to_le16 (LCF_SKIP_PRLI ); +if (lio->u.logio.flags &SRB_LOGIN_FCSP ) { + logio->control_flags |= +cpu_to_le16 (LCF_COMMON_FEAT |LCF_SKIP_PRLI ); + logio->io_parameter[0 ] = +cpu_to_le32 (LIO_COMM_FEAT_FCSP |LIO_COMM_FEAT_CIO ); + } } logio->nport_handle =cpu_to_le16 (sp->fcport->loop_id); logio->port_id[0 ] = sp->fcport->d_id.b.al_pa;
@@ -2806,7 +2812,6 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) (uint8_t *)els_iocb, sizeof(*els_iocb)); }else { - els_iocb->control_flags =cpu_to_le16 (1 <<13 ); els_iocb->tx_byte_count =cpu_to_le32 (sizeof (struct els_logo_payload )); put_unaligned_le64(elsio->u.els_logo.els_logo_pyld_dma,
@@ -3737,6 +3742,16 @@ static void qla2x00_send_notify_ack_iocb(srb_t *sp, nack->u.isp24.srr_reject_code =0 ; nack->u.isp24.srr_reject_code_expl =0 ; nack->u.isp24.vp_index = ntfy->u.isp24.vp_index; + +if (ntfy->u.isp24.status_subcode ==ELS_PLOGI && + (le16_to_cpu (ntfy->u.isp24.flags) &NOTIFY24XX_FLAGS_FCSP ) && + sp->vha->hw->flags.edif_enabled) { +ql_dbg (ql_dbg_disc, sp->vha,0x3074 , +"%s PLOGI NACK sent with FC SECURITY bit, hdl=%x, loopid=%x, to pid %06x\n" , + sp->name, sp->handle, sp->fcport->loop_id, + sp->fcport->d_id.b24); + nack->u.isp24.flags |=cpu_to_le16 (NOTIFY_ACK_FLAGS_FCSP ); + } }/*
drivers/scsi/qla2xxx/qla_isr.c +4 -0
@@ -2372,6 +2372,10 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,if (sp->type !=SRB_LOGIN_CMD ) goto logio_done; + lio->u.logio.iop[1 ] =le32_to_cpu (logio->io_parameter[5 ]); +if (le32_to_cpu (logio->io_parameter[5 ]) &LIO_COMM_FEAT_FCSP ) + fcport->flags |=FCF_FCSP_DEVICE ; + iop[0 ] =le32_to_cpu (logio->io_parameter[0 ]);if (iop[0 ] &BIT_4 ) { fcport->port_type =FCT_TARGET ;
drivers/scsi/qla2xxx/qla_mbx.c +6 -0
@@ -6588,6 +6588,12 @@ int __qla24xx_parse_gpdb(struct scsi_qla_host *vha, fc_port_t *fcport, fcport->d_id.b.al_pa = pd->port_id[2 ]; fcport->d_id.b.rsvd_1 =0 ; +ql_dbg (ql_dbg_disc, vha,0x2062 , +"%8phC SVC Param w3 %02x%02x" , + fcport->port_name, + pd->prli_svc_param_word_3[1 ], + pd->prli_svc_param_word_3[0 ]); +if (NVME_TARGET (vha->hw, fcport)) { fcport->port_type =FCT_NVME ;if ((pd->prli_svc_param_word_3[0 ] &BIT_5 ) ==0 )
drivers/scsi/qla2xxx/qla_mid.c +6 -1
@@ -158,6 +158,10 @@ qla24xx_disable_vp(scsi_qla_host_t *vha)int ret =QLA_SUCCESS ;fc_port_t *fcport; +if (vha->hw->flags.edif_enabled) +/* delete sessions and flush sa_indexes */ +qla2x00_wait_for_sess_deletion (vha); +if (vha->hw->flags.fw_started) ret =qla24xx_control_vp (vha,VCE_COMMAND_DISABLE_VPS_LOGO_ALL );
@@ -166,7 +170,8 @@ qla24xx_disable_vp(scsi_qla_host_t *vha)list_for_each_entry (fcport, &vha->vp_fcports, list) fcport->logout_on_delete =0 ; -qla2x00_mark_all_devices_lost (vha); +if (!vha->hw->flags.edif_enabled) +qla2x00_wait_for_sess_deletion (vha);/* Remove port id from vp target map */ spin_lock_irqsave (&vha->hw->hardware_lock, flags);
drivers/scsi/qla2xxx/qla_os.c +19 -0
@@ -1120,12 +1120,28 @@ static inline int test_fcport_count(scsi_qla_host_t *vha)struct qla_hw_data *ha = vha->hw;unsigned long flags;int res; +/* Return 0 = sleep, x=wake */ spin_lock_irqsave (&ha->tgt.sess_lock, flags);ql_dbg (ql_dbg_init, vha,0x00ec ,"tgt %p, fcport_count=%d\n" , vha, vha->fcport_count); res = (vha->fcport_count ==0 ); +if (res) { +struct fc_port *fcport; + +list_for_each_entry (fcport, &vha->vp_fcports, list) { +if (fcport->deleted !=QLA_SESS_DELETED ) { +/* session(s) may not be fully logged in +* (ie fcport_count=0), but session +* deletion thread(s) may be inflight. +*/ + + res =0 ; +break ; + } + } + }spin_unlock_irqrestore (&ha->tgt.sess_lock, flags);return res;
@@ -3934,6 +3950,8 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,qla2x00_set_fcport_state (fcport,FCS_DEVICE_LOST );qla2x00_schedule_rport_del (vha, fcport); } + +qla_edif_sess_down (vha, fcport);/* * We may need to retry the login, so don't change the state of the * port but do the retries.
@@ -5441,6 +5459,7 @@ void qla2x00_relogin(struct scsi_qla_host *vha)if (atomic_read (&fcport->state) !=FCS_ONLINE && fcport->login_retry) {if (fcport->scan_state !=QLA_FCPORT_FOUND || + fcport->disc_state ==DSC_LOGIN_AUTH_PEND || fcport->disc_state ==DSC_LOGIN_COMPLETE )continue ;
drivers/scsi/qla2xxx/qla_target.c +60 -1
115 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_target.h +1 -0
@@ -176,6 +176,7 @@ struct nack_to_isp {uint8_t reserved[2 ];__le16 ox_id; } __packed; +#define NOTIFY_ACK_FLAGS_FCSP BIT_5#define NOTIFY_ACK_FLAGS_TERMINATE BIT_3#define NOTIFY_ACK_SRR_FLAGS_ACCEPT 0#define NOTIFY_ACK_SRR_FLAGS_REJECT 1
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 8/11 qla2xxx: Add doorbell notification for app
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
During runtime, driver and authentication application needs to stay in sync in terms of: session being down|up, arrival of new authentication message(AUTH ELS) and SADB update completion.
These events are queued up as doorbell to the authentication application. Application would read this doorbell on regular basis to stay up to date. Each SCSI host would have a separate doorbell queue.
The doorbell interface can daisy chain a list of events for each read. Each event contains an event code + hint to help application steer the next course of action.
--- drivers/scsi/qla2xxx/qla_attr.c | 4 + drivers/scsi/qla2xxx/qla_bsg.c | 24 ++- drivers/scsi/qla2xxx/qla_edif.c | 329 ++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_gbl.h | 4 + drivers/scsi/qla2xxx/qla_init.c | 3 + drivers/scsi/qla2xxx/qla_os.c | 4 + drivers/scsi/qla2xxx/qla_target.c | 2 + 7 files changed, 366 insertions(+), 4 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +4 -0
@@ -2435,6 +2435,7 @@ static DEVICE_ATTR(port_speed, 0644, qla2x00_port_speed_show, qla2x00_port_speed_store); static DEVICE_ATTR(port_no, 0444, qla2x00_port_no_show, NULL); static DEVICE_ATTR(fw_attr, 0444, qla2x00_fw_attr_show, NULL); +static DEVICE_ATTR_RO (edif_doorbell);struct device_attribute *qla2x00_host_attrs[] = {
@@ -2480,6 +2481,7 @@ struct device_attribute *qla2x00_host_attrs[] = { &dev_attr_port_no, &dev_attr_fw_attr, &dev_attr_dport_diagnostics, + &dev_attr_edif_doorbell,NULL ,/* reserve for qlini_mode */ NULL ,/* reserve for ql2xiniexchg */ NULL, /* reserve for ql2xexchoffld */
@@ -3108,6 +3110,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)qla_nvme_delete (vha);qla_enode_stop (vha); +qla_edb_stop (vha); + vha->flags.delete_progress =1 ;qlt_remove_target (ha, vha);
drivers/scsi/qla2xxx/qla_bsg.c +20 -4
@@ -2784,10 +2784,13 @@ qla2x00_manage_host_port(struct bsg_job *bsg_job) }static int -qla2x00_process_vendor_specific (struct bsg_job *bsg_job) +qla2x00_process_vendor_specific (struct scsi_qla_host *vha,struct bsg_job *bsg_job) {struct fc_bsg_request *bsg_request = bsg_job->request; +ql_dbg (ql_dbg_edif, vha,0x911b ,"%s FC_BSG_HST_VENDOR cmd[0]=0x%x\n" , + __func__, bsg_request->rqst_data.h_vendor.vendor_cmd[0 ]); +switch (bsg_request->rqst_data.h_vendor.vendor_cmd[0 ]) {case QL_VND_LOOPBACK :return qla2x00_process_loopback (bsg_job);
@@ -2916,12 +2919,19 @@ qla24xx_bsg_request(struct bsg_job *bsg_job)ql_dbg (ql_dbg_user, vha,0x709f ,"BSG: ISP abort active/needed -- cmd=%d.\n" , bsg_request->msgcode); +SET_DID_STATUS (bsg_reply->result,DID_ERROR );return -EBUSY ; } +if (test_bit (PFLG_DRIVER_REMOVING , &vha->pci_flags)) { +SET_DID_STATUS (bsg_reply->result,DID_ERROR ); +return -EIO ; + } + skip_chip_chk: -ql_dbg (ql_dbg_user, vha,0x7000 , -"Entered %s msgcode=0x%x.\n" , __func__, bsg_request->msgcode); +ql_dbg (ql_dbg_user + ql_dbg_verbose, vha,0x7000 , +"Entered %s msgcode=0x%x. bsg ptr %px\n" , + __func__, bsg_request->msgcode, bsg_job);switch (bsg_request->msgcode) {case FC_BSG_RPT_ELS :
@@ -2932,7 +2942,7 @@ qla24xx_bsg_request(struct bsg_job *bsg_job) ret =qla2x00_process_ct (bsg_job);break ;case FC_BSG_HST_VENDOR : - ret =qla2x00_process_vendor_specific (bsg_job); + ret =qla2x00_process_vendor_specific (vha, bsg_job);break ;case FC_BSG_HST_ADD_RPORT :case FC_BSG_HST_DEL_RPORT :
@@ -2941,6 +2951,10 @@ qla24xx_bsg_request(struct bsg_job *bsg_job)ql_log (ql_log_warn, vha,0x705a ,"Unsupported BSG request.\n" );break ; } + +ql_dbg (ql_dbg_user + ql_dbg_verbose, vha,0x7000 , +"%s done with return %x\n" , __func__, ret); +return ret; }
@@ -2955,6 +2969,8 @@ qla24xx_bsg_timeout(struct bsg_job *bsg_job)unsigned long flags;struct req_que *req; +ql_log (ql_log_info, vha,0x708b ,"%s CMD timeout. bsg ptr %p.\n" , + __func__, bsg_job);/* find the bsg job from the active list of commands */ spin_lock_irqsave (&ha->hardware_lock, flags);for (que =0 ; que < ha->max_req_queues; que++) {
drivers/scsi/qla2xxx/qla_edif.c +329 -0
397 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_gbl.h +4 -0
@@ -978,11 +978,15 @@ void qla_nvme_unregister_remote_port(struct fc_port *fcport);/* qla_edif.c */ fc_port_t *qla2x00_find_fcport_by_pid (scsi_qla_host_t *vha,port_id_t *id); +void qla_edb_eventcreate (scsi_qla_host_t *vha,uint32_t dbtype,uint32_t data,uint32_t data2, +fc_port_t *fcport);void qla_edb_stop (scsi_qla_host_t *vha); +ssize_t edif_doorbell_show (struct device *dev,struct device_attribute *attr,char *buf);int32_t qla_edif_app_mgmt (struct bsg_job *bsg_job);void qla_enode_init (scsi_qla_host_t *vha);void qla_enode_stop (scsi_qla_host_t *vha);void qla_edif_flush_sa_ctl_lists (fc_port_t *fcport); +void qla_edb_init (scsi_qla_host_t *vha);void qla24xx_sa_update_iocb (srb_t *sp,struct sa_update_28xx *sa_update_iocb);void qla24xx_sa_replace_iocb (srb_t *sp,struct sa_update_28xx *sa_update_iocb);void qla24xx_auth_els (scsi_qla_host_t *vha,void **pkt,struct rsp_que **rsp);
drivers/scsi/qla2xxx/qla_init.c +3 -0
@@ -1473,6 +1473,9 @@ static int qla_chk_secure_login(scsi_qla_host_t *vha, fc_port_t *fcport, __func__, __LINE__, fcport->port_name); fcport->edif.app_started =1 ; fcport->edif.app_sess_online =1 ; + +qla_edb_eventcreate (vha,VND_CMD_AUTH_STATE_NEEDED , + fcport->d_id.b24,0 , fcport); } rc =1 ;
drivers/scsi/qla2xxx/qla_os.c +4 -0
@@ -3488,6 +3488,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) probe_failed:qla_enode_stop (base_vha); +qla_edb_stop (base_vha);if (base_vha->gnl.l) {dma_free_coherent (&ha->pdev->dev, base_vha->gnl.size, base_vha->gnl.l, base_vha->gnl.ldma);
@@ -3791,6 +3792,7 @@ qla2x00_remove_one(struct pci_dev *pdev) base_vha->gnl.l =NULL ;qla_enode_stop (base_vha); +qla_edb_stop (base_vha);vfree (base_vha->scan.l);
@@ -4917,6 +4919,8 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,init_waitqueue_head (&vha->fcport_waitQ);init_waitqueue_head (&vha->vref_waitq);qla_enode_init (vha); +qla_edb_init (vha); + vha->gnl.size =sizeof (struct get_name_list_extended ) * (ha->max_loop_id +1 );
drivers/scsi/qla2xxx/qla_target.c +2 -0
@@ -585,6 +585,8 @@ static void qla2x00_async_nack_sp_done(srb_t *sp, int res) DSC_LOGIN_AUTH_PEND);qla2x00_post_aen_work (vha,FCH_EVT_PORT_ONLINE , sp->fcport->d_id.b24); +qla_edb_eventcreate (vha,VND_CMD_AUTH_STATE_NEEDED , sp->fcport->d_id.b24, +0 , sp->fcport); }break ;
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 9/11 qla2xxx: Add encryption to IO path
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Latest FC adapter from Marvell has the ability to encrypt data in flight (EDIF) feature. This feature require an application (ex: ipsec, etc) to act as an authenticator.
After the completion of PLOGI, both sides have authenticated and PRLI completion, encrypted IOs are allow to proceed. This patch adds the following:
- use new FW api to encrypt traffic on the wire.
- add driver parameter to enable|disable EDIF feature.
modprobe qla2xxx ql2xsecenable=1
--- drivers/scsi/qla2xxx/qla_edif.c | 337 ++++++++++++++++++++++++++---- drivers/scsi/qla2xxx/qla_fw.h | 3 + drivers/scsi/qla2xxx/qla_gbl.h | 4 + drivers/scsi/qla2xxx/qla_gs.c | 2 +- drivers/scsi/qla2xxx/qla_init.c | 29 ++- drivers/scsi/qla2xxx/qla_iocb.c | 5 +- drivers/scsi/qla2xxx/qla_mbx.c | 27 ++- drivers/scsi/qla2xxx/qla_nvme.c | 4 + drivers/scsi/qla2xxx/qla_os.c | 9 +- drivers/scsi/qla2xxx/qla_target.c | 41 +++- drivers/scsi/qla2xxx/qla_target.h | 16 +- 11 files changed, 406 insertions(+), 71 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +296 -41
@@ -547,41 +547,30 @@ qla_edif_app_start(scsi_qla_host_t *vha, struct bsg_job *bsg_job) }list_for_each_entry_safe (fcport, tf, &vha->vp_fcports, list) { -if ((fcport->flags &FCF_FCSP_DEVICE )) { -ql_dbg (ql_dbg_edif, vha,0xf084 , -"%s: sess %p %8phC lid %#04x s_id %06x logout %d\n" , - __func__, fcport, fcport->port_name, - fcport->loop_id, fcport->d_id.b24, - fcport->logout_on_delete); - -ql_dbg (ql_dbg_edif, vha,0xf084 , -"keep %d els_logo %d disc state %d auth state %d stop state %d\n" , - fcport->keep_nport_handle, - fcport->send_els_logo, fcport->disc_state, - fcport->edif.auth_state, fcport->edif.app_stop); - -if (atomic_read (&vha->loop_state) ==LOOP_DOWN ) -break ; +ql_dbg (ql_dbg_edif, vha,0xf084 , +"%s: sess %p %8phC lid %#04x s_id %06x logout %d\n" , + __func__, fcport, fcport->port_name, + fcport->loop_id, fcport->d_id.b24, + fcport->logout_on_delete); + +ql_dbg (ql_dbg_edif, vha,0xf084 , +"keep %d els_logo %d disc state %d auth state %d stop state %d\n" , + fcport->keep_nport_handle, + fcport->send_els_logo, fcport->disc_state, + fcport->edif.auth_state, fcport->edif.app_stop); + +if (atomic_read (&vha->loop_state) ==LOOP_DOWN ) +break ; -if (!fcport->edif.secured_login) -continue ; + fcport->edif.app_started =1 ; + fcport->edif.app_stop =0 ; - fcport->edif.app_started =1 ; -if (fcport->edif.app_stop || - (fcport->disc_state !=DSC_LOGIN_COMPLETE && - fcport->disc_state !=DSC_LOGIN_PEND && - fcport->disc_state !=DSC_DELETED )) { -/* no activity */ - fcport->edif.app_stop =0 ; - -ql_dbg (ql_dbg_edif, vha,0x911e , -"%s wwpn %8phC calling qla_edif_reset_auth_wait\n" , - __func__, fcport->port_name); - fcport->edif.app_sess_online =1 ; -qla_edif_reset_auth_wait (fcport,DSC_LOGIN_PEND ,0 ); - } -qla_edif_sa_ctl_init (vha, fcport); - } +ql_dbg (ql_dbg_edif, vha,0x911e , +"%s wwpn %8phC calling qla_edif_reset_auth_wait\n" , + __func__, fcport->port_name); + fcport->edif.app_sess_online =1 ; +qla_edif_reset_auth_wait (fcport,DSC_LOGIN_PEND ,0 ); +qla_edif_sa_ctl_init (vha, fcport); }if (vha->pur_cinfo.enode_flags !=ENODE_ACTIVE ) {
@@ -925,6 +914,9 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job)if (tdid.b24 !=0 && tdid.b24 != fcport->d_id.b24)continue ; + app_reply->ports[pcnt].rekey_count = + fcport->edif.rekey_cnt; + app_reply->ports[pcnt].remote_type =VND_CMD_RTYPE_UNKNOWN ;if (fcport->port_type & (FCT_NVME_TARGET |FCT_TARGET ))
@@ -1076,8 +1068,8 @@ qla_edif_app_mgmt(struct bsg_job *bsg_job)if (!vha->hw->flags.edif_enabled ||test_bit (VPORT_DELETE , &vha->dpc_flags)) {ql_dbg (ql_dbg_edif, vha,0x911d , -"%s edif not enabled or vp delete. bsg ptr done %p\n" , - __func__, bsg_job); +"%s edif not enabled or vp delete. bsg ptr done %p. dpc_flags %lx\n" , + __func__, bsg_job, vha->dpc_flags);SET_DID_STATUS (bsg_reply->result,DID_ERROR ); goto done;
@@ -2227,16 +2219,10 @@ void qla24xx_sa_update_iocb(srb_t *sp, struct sa_update_28xx *sa_update_iocb) sa_update_iocb->sa_control |=SA_CNTL_KEY256 ;for (itr =0 ; itr <32 ; itr++) sa_update_iocb->sa_key[itr] = sa_frame->sa_key[itr]; - -ql_dbg (ql_dbg_edif + ql_dbg_verbose, vha,0x921f ,"%s 256 sa key=%32phN\n" , - __func__, sa_update_iocb->sa_key); }else { sa_update_iocb->sa_control |=SA_CNTL_KEY128 ;for (itr =0 ; itr <16 ; itr++) sa_update_iocb->sa_key[itr] = sa_frame->sa_key[itr]; - -ql_dbg (ql_dbg_edif + ql_dbg_verbose, vha,0x921f ,"%s 128 sa key=%16phN\n" , - __func__, sa_update_iocb->sa_key); } ql_dbg(ql_dbg_edif, vha, 0x921d,
@@ -2693,6 +2679,275 @@ qla28xx_sa_update_iocb_entry(scsi_qla_host_t *v, struct req_que *req, sp->done (sp,0 ); } +/** +* qla28xx_start_scsi_edif() - Send a SCSI type 6 command to the ISP +* @sp: command to send to the ISP +* +* Return: non-zero if a failure occurred, else zero. +*/ +int +qla28xx_start_scsi_edif (srb_t *sp) +{ +int nseg; +unsigned long flags; +struct scsi_cmnd *cmd; +uint32_t *clr_ptr; +uint32_t index, i; +uint32_t handle; +uint16_t cnt; +int16_t req_cnt; +uint16_t tot_dsds; +__be32 *fcp_dl; +uint8_t additional_cdb_len; +struct ct6_dsd *ctx; +struct scsi_qla_host *vha = sp->vha; +struct qla_hw_data *ha = vha->hw; +struct cmd_type_6 *cmd_pkt; +struct dsd64 *cur_dsd; +uint8_t avail_dsds =0 ; +struct scatterlist *sg; +struct req_que *req = sp->qpair->req; +spinlock_t *lock = sp->qpair->qp_lock_ptr; + +/* Setup device pointers. */ + cmd =GET_CMD_SP (sp); + +/* So we know we haven't pci_map'ed anything yet */ + tot_dsds =0 ; + +/* Send marker if required */ +if (vha->marker_needed !=0 ) { +if (qla2x00_marker (vha, sp->qpair,0 ,0 ,MK_SYNC_ALL ) != +QLA_SUCCESS ) { +ql_log (ql_log_warn, vha,0x300c , +"qla2x00_marker failed for cmd=%p.\n" , cmd); +return QLA_FUNCTION_FAILED ; + } + vha->marker_needed =0 ; + } + +/* Acquire ring specific lock */ +spin_lock_irqsave (lock, flags); + +/* Check for room in outstanding command list. */ + handle = req->current_outstanding_cmd; +for (index =1 ; index < req->num_outstanding_cmds; index++) { + handle++; +if (handle == req->num_outstanding_cmds) + handle =1 ; +if (!req->outstanding_cmds[handle]) +break ; + } +if (index == req->num_outstanding_cmds) + goto queuing_error; + +/* Map the sg table so we have an accurate count of sg entries needed */ +if (scsi_sg_count (cmd)) { + nseg =dma_map_sg (&ha->pdev->dev,scsi_sglist (cmd), +scsi_sg_count (cmd), cmd->sc_data_direction); +if (unlikely (!nseg)) + goto queuing_error; + }else { + nseg =0 ; + } + + tot_dsds = nseg; + req_cnt =qla24xx_calc_iocbs (vha, tot_dsds); +if (req->cnt < (req_cnt +2 )) { + cnt =IS_SHADOW_REG_CAPABLE (ha) ? *req->out_ptr : +rd_reg_dword (req->req_q_out); +if (req->ring_index < cnt) + req->cnt = cnt - req->ring_index; +else + req->cnt = req->length - + (req->ring_index - cnt); +if (req->cnt < (req_cnt +2 )) + goto queuing_error; + } + + ctx = sp->u.scmd.ct6_ctx = +mempool_alloc (ha->ctx_mempool,GFP_ATOMIC ); +if (!ctx) { +ql_log (ql_log_fatal, vha,0x3010 , +"Failed to allocate ctx for cmd=%p.\n" , cmd); + goto queuing_error; + } + +memset (ctx,0 ,sizeof (struct ct6_dsd )); + ctx->fcp_cmnd =dma_pool_zalloc (ha->fcp_cmnd_dma_pool, +GFP_ATOMIC , &ctx->fcp_cmnd_dma); +if (!ctx->fcp_cmnd) { +ql_log (ql_log_fatal, vha,0x3011 , +"Failed to allocate fcp_cmnd for cmd=%p.\n" , cmd); + goto queuing_error; + } + +/* Initialize the DSD list and dma handle */ +INIT_LIST_HEAD (&ctx->dsd_list); + ctx->dsd_use_cnt =0 ; + +if (cmd->cmd_len >16 ) { + additional_cdb_len = cmd->cmd_len -16 ; +if ((cmd->cmd_len %4 ) !=0 ) { +/* +* SCSI command bigger than 16 bytes must be +* multiple of 4 +*/ +ql_log (ql_log_warn, vha,0x3012 , +"scsi cmd len %d not multiple of 4 for cmd=%p.\n" , + cmd->cmd_len, cmd); + goto queuing_error_fcp_cmnd; + } + ctx->fcp_cmnd_len =12 + cmd->cmd_len +4 ; + }else { + additional_cdb_len =0 ; + ctx->fcp_cmnd_len =12 +16 +4 ; + } + + cmd_pkt = (struct cmd_type_6 *)req->ring_ptr; + cmd_pkt->handle =make_handle (req->id, handle); + +/* +* Zero out remaining portion of packet. +* tagged queuing modifier -- default is TSK_SIMPLE (0). +*/ + clr_ptr = (uint32_t *)cmd_pkt +2 ; +memset (clr_ptr,0 ,REQUEST_ENTRY_SIZE -8 ); + cmd_pkt->dseg_count =cpu_to_le16 (tot_dsds); + +/* No data transfer */ +if (!scsi_bufflen (cmd) || cmd->sc_data_direction ==DMA_NONE ) { + cmd_pkt->byte_count =cpu_to_le32 (0 ); + goto no_dsds; + } + +/* Set transfer direction */ +if (cmd->sc_data_direction ==DMA_TO_DEVICE ) { + cmd_pkt->control_flags =cpu_to_le16 (CF_WRITE_DATA ); + vha->qla_stats.output_bytes +=scsi_bufflen (cmd); + vha->qla_stats.output_requests++; + sp->fcport->edif.tx_bytes +=scsi_bufflen (cmd); + }else if (cmd->sc_data_direction ==DMA_FROM_DEVICE ) { + cmd_pkt->control_flags =cpu_to_le16 (CF_READ_DATA ); + vha->qla_stats.input_bytes +=scsi_bufflen (cmd); + vha->qla_stats.input_requests++; + sp->fcport->edif.rx_bytes +=scsi_bufflen (cmd); + } + + cmd_pkt->control_flags |=cpu_to_le16 (CF_EN_EDIF ); + cmd_pkt->control_flags &= ~(cpu_to_le16 (CF_NEW_SA )); + +/* One DSD is available in the Command Type 6 IOCB */ + avail_dsds =1 ; + cur_dsd = &cmd_pkt->fcp_dsd; + +/* Load data segments */ +scsi_for_each_sg (cmd, sg, tot_dsds, i) { +dma_addr_t sle_dma; +cont_a64_entry_t *cont_pkt; + +/* Allocate additional continuation packets? */ +if (avail_dsds ==0 ) { +/* +* Five DSDs are available in the Continuation +* Type 1 IOCB. +*/ + cont_pkt =qla2x00_prep_cont_type1_iocb (vha, req); + cur_dsd = cont_pkt->dsd; + avail_dsds =5 ; + } + + sle_dma =sg_dma_address (sg); +put_unaligned_le64 (sle_dma, &cur_dsd->address); + cur_dsd->length =cpu_to_le32 (sg_dma_len (sg)); + cur_dsd++; + avail_dsds--; + } + +no_dsds: +/* Set NPORT-ID and LUN number*/ + cmd_pkt->nport_handle =cpu_to_le16 (sp->fcport->loop_id); + cmd_pkt->port_id[0 ] = sp->fcport->d_id.b.al_pa; + cmd_pkt->port_id[1 ] = sp->fcport->d_id.b.area; + cmd_pkt->port_id[2 ] = sp->fcport->d_id.b.domain; + cmd_pkt->vp_index = sp->vha->vp_idx; + + cmd_pkt->entry_type =COMMAND_TYPE_6 ; + +/* Set total data segment count. */ + cmd_pkt->entry_count = (uint8_t )req_cnt; + +int_to_scsilun (cmd->device->lun, &cmd_pkt->lun); +host_to_fcp_swap ((uint8_t *)&cmd_pkt->lun,sizeof (cmd_pkt->lun)); + +/* build FCP_CMND IU */ +int_to_scsilun (cmd->device->lun, &ctx->fcp_cmnd->lun); + ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; + +if (cmd->sc_data_direction ==DMA_TO_DEVICE ) + ctx->fcp_cmnd->additional_cdb_len |=1 ; +else if (cmd->sc_data_direction ==DMA_FROM_DEVICE ) + ctx->fcp_cmnd->additional_cdb_len |=2 ; + +/* Populate the FCP_PRIO. */ +if (ha->flags.fcp_prio_enabled) + ctx->fcp_cmnd->task_attribute |= + sp->fcport->fcp_prio <<3 ; + +memcpy (ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); + + fcp_dl = (__be32 *)(ctx->fcp_cmnd->cdb +16 + + additional_cdb_len); + *fcp_dl =htonl ((uint32_t )scsi_bufflen (cmd)); + + cmd_pkt->fcp_cmnd_dseg_len =cpu_to_le16 (ctx->fcp_cmnd_len); +put_unaligned_le64 (ctx->fcp_cmnd_dma, &cmd_pkt->fcp_cmnd_dseg_address); + + sp->flags |=SRB_FCP_CMND_DMA_VALID ; + cmd_pkt->byte_count =cpu_to_le32 ((uint32_t )scsi_bufflen (cmd)); +/* Set total data segment count. */ + cmd_pkt->entry_count = (uint8_t )req_cnt; + cmd_pkt->entry_status =0 ; + +/* Build command packet. */ + req->current_outstanding_cmd = handle; + req->outstanding_cmds[handle] = sp; + sp->handle = handle; + cmd->host_scribble = (unsigned char *)(unsigned long )handle; + req->cnt -= req_cnt; + +/* Adjust ring index. */ +wmb (); + req->ring_index++; +if (req->ring_index == req->length) { + req->ring_index =0 ; + req->ring_ptr = req->ring; + }else { + req->ring_ptr++; + } + +/* Set chip new ring index. */ +wrt_reg_dword (req->req_q_in, req->ring_index); + +spin_unlock_irqrestore (lock, flags); + +return QLA_SUCCESS ; + +queuing_error_fcp_cmnd: +dma_pool_free (ha->fcp_cmnd_dma_pool, ctx->fcp_cmnd, ctx->fcp_cmnd_dma); +queuing_error: +if (tot_dsds) +scsi_dma_unmap (cmd); + +if (sp->u.scmd.ct6_ctx) { +mempool_free (sp->u.scmd.ct6_ctx, ha->ctx_mempool); + sp->u.scmd.ct6_ctx =NULL ; + } +spin_unlock_irqrestore (lock, flags); + +return QLA_FUNCTION_FAILED ; +} +/********************************************** * edif update/delete sa_index list functions * **********************************************/
drivers/scsi/qla2xxx/qla_fw.h +3 -0
@@ -490,6 +490,9 @@ struct cmd_type_6 {struct scsi_lun lun;/* FCP LUN (BE). */ __le16 control_flags;/* Control flags. */ +#define CF_NEW_SA BIT_12 +#define CF_EN_EDIF BIT_9 +#define CF_ADDITIONAL_PARAM_BLK BIT_8#define CF_DIF_SEG_DESCR_ENABLE BIT_3#define CF_DATA_SEG_DESCR_ENABLE BIT_2#define CF_READ_DATA BIT_1
drivers/scsi/qla2xxx/qla_gbl.h +4 -0
@@ -188,6 +188,7 @@ extern int ql2xenablemsix;extern int qla2xuseresexchforels;extern int ql2xdifbundlinginternalbuffers;extern int ql2xfulldump_on_mpifail; +extern int ql2xsecenable;extern int ql2xenforce_iocb_limit;extern int ql2xabts_wait_nvme;
@@ -297,6 +298,8 @@ extern int qla2x00_vp_abort_isp(scsi_qla_host_t *);*/ void qla_els_pt_iocb (struct scsi_qla_host *vha,struct els_entry_24xx *pkt,struct qla_els_pt_arg *a); +cont_a64_entry_t *qla2x00_prep_cont_type1_iocb (scsi_qla_host_t *vha, +struct req_que *que);extern uint16_t qla2x00_calc_iocbs_32 (uint16_t );extern uint16_t qla2x00_calc_iocbs_64 (uint16_t );extern void qla2x00_build_scsi_iocbs_32 (srb_t *,cmd_entry_t *,uint16_t );
@@ -987,6 +990,7 @@ void qla_enode_init(scsi_qla_host_t *vha);void qla_enode_stop (scsi_qla_host_t *vha);void qla_edif_flush_sa_ctl_lists (fc_port_t *fcport);void qla_edb_init (scsi_qla_host_t *vha); +int qla28xx_start_scsi_edif (srb_t *sp);void qla24xx_sa_update_iocb (srb_t *sp,struct sa_update_28xx *sa_update_iocb);void qla24xx_sa_replace_iocb (srb_t *sp,struct sa_update_28xx *sa_update_iocb);void qla24xx_auth_els (scsi_qla_host_t *vha,void **pkt,struct rsp_que **rsp);
drivers/scsi/qla2xxx/qla_gs.c +1 -1
@@ -632,7 +632,7 @@ static int qla_async_rftid(scsi_qla_host_t *vha, port_id_t *d_id) ct_req->req.rft_id.port_id =port_id_to_be_id (vha->d_id); ct_req->req.rft_id.fc4_types[2 ] =0x01 ;/* FCP-3 */ -if (vha->flags.nvme_enabled) +if (vha->flags.nvme_enabled &&qla_ini_mode_enabled (vha)) ct_req->req.rft_id.fc4_types[6 ] =1 ;/* NVMe type 28h */ sp->u.iocb_cmd.u.ctarg.req_size =RFT_ID_REQ_SIZE ;
drivers/scsi/qla2xxx/qla_init.c +14 -15
@@ -345,15 +345,13 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport,if (N2N_TOPO (fcport->vha->hw) &&fcport_is_bigger (fcport)) { lio->u.logio.flags |=SRB_LOGIN_PRLI_ONLY ; }else { -if (vha->hw->flags.edif_enabled) { -if (fcport->edif.non_secured_login ==0 ) { - lio->u.logio.flags |= - (SRB_LOGIN_FCSP |SRB_LOGIN_SKIP_PRLI ); -ql_dbg (ql_dbg_disc, vha,0x2072 , -"Async-login: w/ FCSP %8phC hdl=%x, loopid=%x portid=%06x\n" , - fcport->port_name, sp->handle, fcport->loop_id, - fcport->d_id.b24); - } +if (vha->hw->flags.edif_enabled && + vha->e_dbell.db_flags &EDB_ACTIVE ) { + lio->u.logio.flags |= + (SRB_LOGIN_FCSP |SRB_LOGIN_SKIP_PRLI ); +ql_dbg (ql_dbg_disc, vha,0x2072 , +"Async-login: w/ FCSP %8phC hdl=%x, loopid=%x portid=%06x\n" , + fcport->port_name, sp->handle, fcport->loop_id, fcport->d_id.b24); }else { lio->u.logio.flags |=SRB_LOGIN_COND_PLOGI ; }
@@ -363,10 +361,9 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, lio->u.logio.flags |=SRB_LOGIN_SKIP_PRLI ;ql_log (ql_log_warn, vha,0x2072 , -"Async-login - %8phC hdl=%x, loopid=%x portid=%02x%02x%02x retries=%d.\n" , +"Async-login - %8phC hdl=%x, loopid=%x portid=%06x retries=%d.\n" , fcport->port_name, sp->handle, fcport->loop_id, - fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, - fcport->login_retry); + fcport->d_id.b24, fcport->login_retry); rval =qla2x00_start_sp (sp);if (rval !=QLA_SUCCESS ) {
@@ -3964,7 +3961,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) }/* Enable PUREX PASSTHRU */ -if (ql2xrdpenable || ha->flags.scm_supported_f) +if (ql2xrdpenable || ha->flags.scm_supported_f || + ha->flags.edif_enabled)qla25xx_set_els_cmds_supported (vha); }else goto failed;
@@ -4149,7 +4147,7 @@ qla24xx_update_fw_options(scsi_qla_host_t *vha) }/* Move PUREX, ABTS RX & RIDA to ATIOQ */ -if (ql2xmvasynctoatio && +if (ql2xmvasynctoatio && !ha->flags.edif_enabled && (IS_QLA83XX (ha) ||IS_QLA27XX (ha) ||IS_QLA28XX (ha))) {if (qla_tgt_mode_enabled (vha) ||qla_dual_mode_enabled (vha))
@@ -4177,7 +4175,8 @@ qla24xx_update_fw_options(scsi_qla_host_t *vha) ha->fw_options[2 ] &= ~BIT_8 ; } -if (ql2xrdpenable || ha->flags.scm_supported_f) +if (ql2xrdpenable || ha->flags.scm_supported_f || + ha->flags.edif_enabled) ha->fw_options[1 ] |=ADD_FO1_ENABLE_PUREX_IOCB ;/* Enable Async 8130/8131 events -- transceiver insertion/removal */
drivers/scsi/qla2xxx/qla_iocb.c +4 -1
@@ -118,7 +118,7 @@ qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)* * Returns a pointer to the continuation type 1 IOCB packet. */ -static inline cont_a64_entry_t * +cont_a64_entry_t *qla2x00_prep_cont_type1_iocb (scsi_qla_host_t *vha,struct req_que *req) {cont_a64_entry_t *cont_pkt;
@@ -1963,6 +1963,9 @@ qla2xxx_start_scsi_mq(srb_t *sp)struct qla_hw_data *ha = vha->hw;struct qla_qpair *qpair = sp->qpair; +if (sp->fcport->edif.enable) +return qla28xx_start_scsi_edif (sp); +/* Acquire qpair specific lock */ spin_lock_irqsave (&qpair->qp_lock, flags);
drivers/scsi/qla2xxx/qla_mbx.c +22 -5
@@ -739,7 +739,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr) mcp->mb[11 ] |=EXE_FW_FORCE_SEMAPHORE ; mcp->out_mb |=MBX_4 |MBX_3 |MBX_2 |MBX_1 |MBX_11 ; - mcp->in_mb |=MBX_3 |MBX_2 |MBX_1 ; + mcp->in_mb |=MBX_5 |MBX_3 |MBX_2 |MBX_1 ; }else { mcp->mb[1 ] =LSW (risc_addr); mcp->out_mb |=MBX_1 ;
@@ -795,6 +795,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr) } } +if (IS_QLA28XX (ha) && (mcp->mb[5 ] &BIT_10 ) && ql2xsecenable) { + ha->flags.edif_enabled =1 ; +ql_log (ql_log_info, vha,0xffff , +"%s: edif is enabled\n" , __func__); + } + done:ql_dbg (ql_dbg_mbx + ql_dbg_verbose, vha,0x1028 ,"Done %s.\n" , __func__);
@@ -4946,7 +4952,7 @@ qla24xx_get_port_login_templ(scsi_qla_host_t *vha, dma_addr_t buf_dma,return rval; } -#define PUREX_CMD_COUNT 2 +#define PUREX_CMD_COUNT 4int qla25xx_set_els_cmds_supported (scsi_qla_host_t *vha) {
@@ -4954,6 +4960,7 @@ qla25xx_set_els_cmds_supported(scsi_qla_host_t *vha)mbx_cmd_t mc;mbx_cmd_t *mcp = &mc;uint8_t *els_cmd_map; +uint8_t active_cnt =0 ;dma_addr_t els_cmd_map_dma;uint8_t cmd_opcode[PUREX_CMD_COUNT ];uint8_t i, index, purex_bit;
@@ -4975,10 +4982,20 @@ qla25xx_set_els_cmds_supported(scsi_qla_host_t *vha) }/* List of Purex ELS */ - cmd_opcode[0 ] =ELS_FPIN ; - cmd_opcode[1 ] =ELS_RDP ; +if (ql2xrdpenable) { + cmd_opcode[active_cnt] =ELS_RDP ; + active_cnt++; + } +if (ha->flags.scm_supported_f) { + cmd_opcode[active_cnt] =ELS_FPIN ; + active_cnt++; + } +if (ha->flags.edif_enabled) { + cmd_opcode[active_cnt] =ELS_AUTH_ELS ; + active_cnt++; + } -for (i =0 ; i <PUREX_CMD_COUNT ; i++) { +for (i =0 ; i < active_cnt; i++) { index = cmd_opcode[i] /8 ; purex_bit = cmd_opcode[i] %8 ; els_cmd_map[index] |=1 << purex_bit;
drivers/scsi/qla2xxx/qla_nvme.c +4 -0
@@ -463,6 +463,10 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp) }else if (fd->io_dir ==0 ) { cmd_pkt->control_flags =0 ; } + +if (sp->fcport->edif.enable && fd->io_dir !=0 ) + cmd_pkt->control_flags |=cpu_to_le16 (CF_EN_EDIF ); +/* Set BIT_13 of control flags for Async event */ if (vha->flags.nvme2_enabled && cmd->sqe.common.opcode == nvme_admin_async_event) {
drivers/scsi/qla2xxx/qla_os.c +7 -2
@@ -53,6 +53,11 @@ static struct kmem_cache *ctx_cachep;*/ uint ql_errlev =0x8001 ; +int ql2xsecenable; +module_param (ql2xsecenable, int,S_IRUGO ); +MODULE_PARM_DESC (ql2xsecenable, +"Enable/disable security. 0(Default) - Security disabled. 1 - Security enabled." ); +static int ql2xenableclass2;module_param (ql2xenableclass2, int,S_IRUGO |S_IRUSR ); MODULE_PARM_DESC(ql2xenableclass2,
@@ -4030,7 +4035,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,if (!ha->srb_mempool) goto fail_free_gid_list; -if (IS_P3P_TYPE (ha)) { +if (IS_P3P_TYPE (ha) ||IS_QLA27XX (ha) || (ql2xsecenable &&IS_QLA28XX (ha))) {/* Allocate cache for CT6 Ctx. */ if (!ctx_cachep) { ctx_cachep = kmem_cache_create("qla2xxx_ctx",
@@ -4064,7 +4069,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,"init_cb=%p gid_list=%p, srb_mempool=%p s_dma_pool=%p.\n" , ha->init_cb, ha->gid_list, ha->srb_mempool, ha->s_dma_pool); -if (IS_P3P_TYPE (ha) || ql2xenabledif) { +if (IS_P3P_TYPE (ha) || ql2xenabledif || (IS_QLA28XX (ha) && ql2xsecenable)) { ha->dl_dma_pool =dma_pool_create (name, &ha->pdev->dev,DSD_LIST_DMA_POOL_SIZE ,8 ,0 );if (!ha->dl_dma_pool) {
drivers/scsi/qla2xxx/qla_target.c +36 -5
89 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_target.h +15 -1
@@ -239,6 +239,10 @@ struct ctio_to_2xxx {#define CTIO_PORT_LOGGED_OUT 0x29#define CTIO_PORT_CONF_CHANGED 0x2A#define CTIO_SRR_RECEIVED 0x45 +#define CTIO_FAST_AUTH_ERR 0x63 +#define CTIO_FAST_INCOMP_PAD_LEN 0x65 +#define CTIO_FAST_INVALID_REQ 0x66 +#define CTIO_FAST_SPI_ERR 0x67#endif #ifndef CTIO_RET_TYPE
@@ -409,7 +413,16 @@ struct ctio7_to_24xx {struct {__le16 reserved1;__le16 flags; -__le32 residual; +union { +__le32 residual; +struct { +uint8_t rsvd1; +uint8_t edif_flags; +#define EF_EN_EDIF BIT_0 +#define EF_NEW_SA BIT_1 +uint16_t rsvd2; + }; + };__le16 ox_id;__le16 scsi_status;__le32 relative_offset;
@@ -876,6 +889,7 @@ struct qla_tgt_cmd { unsigned int term_exchg:1; unsigned int cmd_sent_to_fw:1; unsigned int cmd_in_wq:1; + unsigned int edif:1;/* * This variable may be set from outside the LIO and I/O completion
Signature · 1 line
2.19.0.rc0
Nilesh Javali
maintainerPATCH v4 10/11 qla2xxx: Increment EDIF command and completion counts
In reply to Nilesh JavaliFrom: Quinn Tran <[email protected]>
Increment the command and the completion counts.
--- drivers/scsi/qla2xxx/qla_edif.c | 1 + drivers/scsi/qla2xxx/qla_isr.c | 3 +-- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +1 -0
@@ -2926,6 +2926,7 @@ qla28xx_start_scsi_edif(srb_t *sp) req->ring_ptr++; } + sp->qpair->cmd_cnt++;/* Set chip new ring index. */ wrt_reg_dword (req->req_q_in, req->ring_index);
drivers/scsi/qla2xxx/qla_isr.c +1 -2
@@ -3192,10 +3192,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)return ; } - sp->qpair->cmd_completion_cnt++; -/* Fast path completion. */ qla_chk_edif_rx_sa_delete_pending (vha, sp, sts24); + sp->qpair->cmd_completion_cnt++;if (comp_status ==CS_COMPLETE && scsi_status ==0 ) {qla2x00_process_completed_request (vha, req, handle);
Signature · 1 line
2.19.0.rc0
Re: [PATCH v4 10/11] qla2xxx: Increment EDIF command and completion counts
Quoted 30 lines · Nilesh Javali
From: Quinn Tran <[email protected]>
Increment the command and the completion counts.
Signed-off-by Quinn Tran <[email protected]>Signed-off-by Nilesh Javali <[email protected]>--- drivers/scsi/qla2xxx/qla_edif.c | 1 + drivers/scsi/qla2xxx/qla_isr.c | 3 +-- 2 files changed, 2 insertions(+), 2 deletions(-)drivers/scsi/qla2xxx/qla_edif.c +1
-0@@ -2926,6 +2926,7 @@ qla28xx_start_scsi_edif(srb_t *sp) req->ring_ptr++; } + sp->qpair->cmd_cnt++;/* Set chip new ring index. */ wrt_reg_dword (req->req_q_in, req->ring_index);drivers/scsi/qla2xxx/qla_isr.c +0
-0@@ -3192,10 +3192,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)return ;
drivers/scsi/qla2xxx/qla_isr.c qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) · line 3200
Quoted 10 lines
drivers/scsi/qla2xxx/qla_isr.c +1
-2} - sp->qpair->cmd_completion_cnt++; -/* Fast path completion. */ qla_chk_edif_rx_sa_delete_pending (vha, sp, sts24); + sp->qpair->cmd_completion_cnt++;if (comp_status ==CS_COMPLETE && scsi_status ==0 ) {qla2x00_process_completed_request (vha, req, handle);
Please fix up the patch description (the patch doesn't add counter increments, it just moves them to the correct place).
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Kernel Storage Architect [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
Nilesh Javali
maintainerPATCH v4 11/11 qla2xxx: Update version to 10.02.00.107-k
In reply to Nilesh Javali--- drivers/scsi/qla2xxx/qla_version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_version.h +2 -2
@@ -6,9 +6,9 @@/* * Driver version */ -#define QLA2XXX_VERSION "10.02.00.106-k" +#define QLA2XXX_VERSION "10.02.00.107-k"#define QLA_DRIVER_MAJOR_VER 10#define QLA_DRIVER_MINOR_VER 2#define QLA_DRIVER_PATCH_VER 0 -#define QLA_DRIVER_BETA_VER 106 +#define QLA_DRIVER_BETA_VER 107
Signature · 1 line
2.19.0.rc0
Martin K. Petersen
AppliedNilesh,
Quoted 2 lines
Please apply the EDIF support feature to the scsi tree at your earliest convenience.
Applied to 5.15/scsi-staging, thanks!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering