luajit: mips and mipsel are 32bit targets too
PATCH 1/1 luajit: mips and mipsel are 32bit targets too
When cross compiling, the word size of the compiler set via HOST_CC must match the word size of the target. That's achieved by appending "-m32" to BUILD_CC_ARCH if the target word size is known to be 32bits.
Unfortunately the current list of over-rides (powerpc, x86 and arm) does not cover all cases. Add mips and mipsel to the list too (which is still not enough to cover all targets or corner cases such as x32, but better than before).
--- meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb | 2 ++ 1 file changed, 2 insertions(+)
meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +2 -0
@@ -24,6 +24,8 @@ BBCLASSEXTEND = "native" BUILD_CC_ARCH_append_powerpc = ' -m32' BUILD_CC_ARCH_append_x86 = ' -m32' BUILD_CC_ARCH_append_arm = ' -m32' +BUILD_CC_ARCH_append_mips = ' -m32' +BUILD_CC_ARCH_append_mipsel = ' -m32' # The lua makefiles expect the TARGET_SYS to be from uname -s # Values: Windows, Linux, Darwin, iOS, SunOS, PS3, GNU/kFreeBSD
Signature · 1 line
1.9.1
Quoted 8 lines · Andre McCurdy
When cross compiling, the word size of the compiler set via
HOST_CCmust match the word size of the target. That's achieved by appending "-m32" toBUILD_CC_ARCHif the target word size is known to be 32bits.Unfortunately the current list of over-rides (powerpc, x86 and arm) does not cover all cases. Add mips and mipsel to the list too (which is still not enough to cover all targets or corner cases such as x32, but better than before).
x32 ABI is not supported in luaJIT
Quoted 20 lines
Signed-off-by Andre McCurdy <[email protected]>--- meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb | 2 ++ 1 file changed, 2 insertions(+)meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +2
-0@@ -24,6 +24,8 @@ BBCLASSEXTEND = "native" BUILD_CC_ARCH_append_powerpc = ' -m32' BUILD_CC_ARCH_append_x86 = ' -m32' BUILD_CC_ARCH_append_arm = ' -m32' +BUILD_CC_ARCH_append_mips = ' -m32' +BUILD_CC_ARCH_append_mipsel = ' -m32' # The lua makefiles expect the TARGET_SYS to be from uname -s # Values: Windows, Linux, Darwin, iOS, SunOS, PS3, GNU/kFreeBSD
Quoted 23 lines · Andre McCurdy
When cross compiling, the word size of the compiler set via
HOST_CCmust match the word size of the target. That's achieved by appending "-m32" toBUILD_CC_ARCHif the target word size is known to be 32bits.Unfortunately the current list of over-rides (powerpc, x86 and arm) does not cover all cases. Add mips and mipsel to the list too (which is still not enough to cover all targets or corner cases such as x32, but better than before).
Signed-off-by Andre McCurdy <[email protected]>---
meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb | 2 ++1 file changed, 2 insertions(+)meta- renamed from meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +0
-0oe/recipes-devtools/luajit/luajit_2.0.4.bb
index 964dc1d..2049846 100644meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +0
-0@@ -24,6 +24,8 @@ BBCLASSEXTEND = "native"BUILD_CC_ARCH_append_powerpc = ' -m32'
BUILD_CC_ARCH_append_x86 = ' -m32'
BUILD_CC_ARCH_append_arm = ' -m32'
meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb BBCLASSEXTEND = "native" · line 28
Quoted 2 lines
meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +2
-0+BUILD_CC_ARCH_append_mips = ' -m32' +BUILD_CC_ARCH_append_mipsel = ' -m32'
I suspect this should be using:
BUILD_CC_ARCH_append_mipsarchn32 = ' -m32'BUILD_CC_ARCH_append_mipsarcho32 = ' -m32'
to also cover mips r6?
Cheers,
Andre'
Quoted 29 lines · André Draszik
Quoted 20 lines · Andre McCurdy
When cross compiling, the word size of the compiler set via
HOST_CCmust match the word size of the target. That's achieved by appending "-m32" toBUILD_CC_ARCHif the target word size is known to be 32bits.Unfortunately the current list of over-rides (powerpc, x86 and arm) does not cover all cases. Add mips and mipsel to the list too (which is still not enough to cover all targets or corner cases such as x32, but better than before).
Signed-off-by Andre McCurdy <[email protected]>--- meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb | 2 ++ 1 file changed, 2 insertions(+)meta- renamed from meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +0
-0oe/recipes-devtools/luajit/luajit_2.0.4.bb
index 964dc1d..2049846 100644meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb BBCLASSEXTEND = "native" · line 28
Quoted 5 lines
meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +2
-0@@ -24,6 +24,8 @@ BBCLASSEXTEND = "native" BUILD_CC_ARCH_append_powerpc = ' -m32' BUILD_CC_ARCH_append_x86 = ' -m32' BUILD_CC_ARCH_append_arm = ' -m32' +BUILD_CC_ARCH_append_mips = ' -m32' +BUILD_CC_ARCH_append_mipsel = ' -m32'I suspect this should be using:
Quoted 2 lines
BUILD_CC_ARCH_append_mipsarchn32= ' -m32'BUILD_CC_ARCH_append_mipsarcho32= ' -m32'
That wouldn't work so well when backported to krogoth and morty (which is where I personally need the fix).
But maybe there's a more generic way to answer the question "is the target 32bit?" from within a recipe without needing to keep a list of over-rides up to date?
Quoted 13 lines
to also cover mips r6?
Cheers,
Andre'--
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel
Quoted 33 lines · Andre McCurdy
Quoted 29 lines · André Draszik
Quoted 20 lines · Andre McCurdy
When cross compiling, the word size of the compiler set via
HOST_CCmust match the word size of the target. That's achieved by appending "-m32" toBUILD_CC_ARCHif the target word size is known to be 32bits.Unfortunately the current list of over-rides (powerpc, x86 and arm) does not cover all cases. Add mips and mipsel to the list too (which is still not enough to cover all targets or corner cases such as x32, but better than before).
Signed-off-by Andre McCurdy <[email protected]>--- meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb | 2 ++ 1 file changed, 2 insertions(+)meta- renamed from meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +0
-0oe/recipes-devtools/luajit/luajit_2.0.4.bb
index 964dc1d..2049846 100644meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb BBCLASSEXTEND = "native" · line 28
Quoted 5 lines
meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb +2
-0@@ -24,6 +24,8 @@ BBCLASSEXTEND = "native" BUILD_CC_ARCH_append_powerpc = ' -m32' BUILD_CC_ARCH_append_x86 = ' -m32' BUILD_CC_ARCH_append_arm = ' -m32' +BUILD_CC_ARCH_append_mips = ' -m32' +BUILD_CC_ARCH_append_mipsel = ' -m32'I suspect this should be using:
Quoted 2 lines
BUILD_CC_ARCH_append_mipsarchn32= ' -m32'BUILD_CC_ARCH_append_mipsarcho32= ' -m32'
Quoted 6 lines
That wouldn't work so well when backported to krogoth and morty (which is where I personally need the fix).
But maybe there's a more generic way to answer the question "is the target 32bit?" from within a recipe without needing to keep a list of over-rides up to date?
SITEINFO_BITS seems to do that.
Quoted 4 lines
Quoted 4 lines
Cheers,
Andre'