board/beaglebone: fix boot on BeagleBone Black
PATCH 1/1 board/beaglebone: fix boot on BeagleBone Black
From: Carlos Santos <[email protected]>
Commit 68b5b79b2f has set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.
Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the values that were valid for the ancient U-Boot and Linux pre-installed on old boards but cause boot hangs with the current versions.
---
CC: Thomas Petazzoni <[email protected]>
CC: Lothar Felten <[email protected]>
---
Changes v1->v2:
- Clarify the explanation about old U-Boot versions in the commit message.
--- board/beaglebone/uEnv.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
board/beaglebone/uEnv.txt +4 -1
@@ -3,6 +3,9 @@ devtype=mmc bootdir= bootfile=zImage bootpartition=mmcblk0p2 +console=ttyS0,115200n8 +loadaddr=0x82000000 +fdtaddr=0x88000000 set_mmc1=if test $board_name = A33515BB; then setenv bootpartition mmcblk1p2; fi -set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait +set_bootargs=setenv bootargs console=${console} root=/dev/${bootpartition} rw rootfstype=ext4 rootwait uenvcmd=run set_mmc1; run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr}
Signature · 1 line
2.18.1
Thomas Petazzoni
AppliedPATCH 1/1 board/beaglebone: fix boot on BeagleBone Black
Quoted 17 lines · On Sat, 9 Nov 2019 12:22:54 -0300 unixmania at gmail.com wrote:
From: Carlos Santos <[email protected]>
Commit
68b5b79b2fhas set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.Also set loadaddr to
0x82000000and fdtaddr to0x88000000, replacing the values that were valid for the ancient U-Boot and Linux pre-installed on old boards but cause boot hangs with the current versions.Signed-off-by Carlos Santos <[email protected]>---
CC: Thomas Petazzoni <[email protected]>
CC: Lothar Felten <[email protected]>
---
Changesv1->v2:
- Clarify the explanation about old U-Boot versions in the commit message.
Quoted 3 lines
--- board/beaglebone/uEnv.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/1 board/beaglebone: fix boot on BeagleBone Black
In reply to unixmania at gmail.comQuoted 10 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"unixmania" == unixmania <[email protected]> writes:
From: Carlos Santos <[email protected]>
Commit68b5b79b2fhas set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.Also set loadaddr to
0x82000000and fdtaddr to0x88000000, replacing the values that were valid for the ancient U-Boot and Linux pre-installed on old boards but cause boot hangs with the current versions.
Quoted 8 lines
Signed-off-by Carlos Santos <[email protected]>---
CC: Thomas Petazzoni <[email protected]>
CC: Lothar Felten <[email protected]>
---
Changesv1->v2:
- Clarify the explanation about old U-Boot versions in the commit message.
Committed to 2019.02.x and 2019.08.x, thanks.
Signature · 1 line
Bye, Peter Korsgaard