target/arm: Allow to switch from MON->HYP on AArch32
PATCH 1/1 target/arm: Allow to switch from MON->HYP on AArch32
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
The reason seems to be that we try to see whether we are entering HYP mode from the NS side. However, MON is always considered secure, so we always fall into an error case when going MON->HYP and never manage to actually do the switch.
Fix this by not using a different helper function that does not bork when we're in MON state, as that switch is supposed to work.
--- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
target/arm/helper.c +1 -1
@@ -6297,7 +6297,7 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)return 0 ;case ARM_CPU_MODE_HYP :return !arm_feature (env,ARM_FEATURE_EL2 ) - ||arm_current_el (env) <2 ||arm_is_secure (env); + ||arm_current_el (env) <2 ||arm_is_secure_below_el3 (env);case ARM_CPU_MODE_MON :return arm_current_el (env) <3 ;default :
Signature · 1 line
2.12.3
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
What EL is MON in this case? EL3? In which case I'm confused by the terminology as the ARM ARM states:
The principles of the ARMv8-A security model are:
• If the implementation includes EL3, then it has two Security states, Secure and Non-secure, and:
— EL3 exists only in Secure state.
— A change from Non-secure state to Secure state can only occur on taking an exception to EL3. — A change from Secure state to Non-secure state can only occur on an exception return from EL3.
We don't currently implement ARMv8.4-SecEL2 but that adds secure EL2 but as you can only switch security state in in/out of EL3 you have to be go to the secure monitor before you enter it.
Quoted 18 lines
The reason seems to be that we try to see whether we are entering HYP mode from the NS side. However, MON is always considered secure, so we always fall into an error case when going
MON->HYPand never manage to actually do the switch.Fix this by not using a different helper function that does not bork when we're in MON state, as that switch is supposed to work.
Signed-off-by Alexander Graf <[email protected]>--- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)target/arm/helper.c +0
-0
target/arm/helper.c static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) · line 6301
Quoted 6 lines
target/arm/helper.c +1
-1@@ -6297,7 +6297,7 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)return 0 ;case ARM_CPU_MODE_HYP :return !arm_feature (env,ARM_FEATURE_EL2 ) - ||arm_current_el (env) <2 ||arm_is_secure (env); + ||arm_current_el (env) <2 ||arm_is_secure_below_el3 (env);
This seems to violate the rule that you can enter a NS state from anything other than EL3.
Quoted 3 lines
target/arm/helper.c +0
-0case ARM_CPU_MODE_MON :return arm_current_el (env) <3 ;default:
--
Alex Bennée
Quoted 14 lines · Alex Bennée
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
What EL is MON in this case? EL3? In which case I'm confused by the terminology as the ARM ARM states:
The principles of the ARMv8-A security model are:
• If the implementation includes EL3, then it has two Security states, Secure and Non-secure, and:
— EL3 exists only in Secure state.
— A change from Non-secure state to Secure state can only occur on taking an exception to EL3. — A change from Secure state to Non-secure state can only occur on an exception return from EL3.
Quoted 3 lines
We don't currently implement ARMv8.4-SecEL2 but that adds secure EL2 but as you can only switch security state in in/out of EL3 you have to be go to the secure monitor before you enter it.
Right - and exactly that switch seems to be prohibited here.
Quoted 14 lines
Quoted 14 lines
The reason seems to be that we try to see whether we are entering HYP mode from the NS side. However, MON is always considered secure, so we always fall into an error case when going
MON->HYPand never manage to actually do the switch.Fix this by not using a different helper function that does not bork when we're in MON state, as that switch is supposed to work.
Signed-off-by Alexander Graf <[email protected]>--- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 13 lines
target/arm/helper.c static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) · line 6301
Quoted 11 lines
target/arm/helper.c +1
-1@@ -6297,7 +6297,7 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)return 0 ;case ARM_CPU_MODE_HYP :return !arm_feature (env,ARM_FEATURE_EL2 ) - ||arm_current_el (env) <2 ||arm_is_secure (env); + ||arm_current_el (env) <2 ||arm_is_secure_below_el3 (env);This seems to violate the rule that you can enter a NS state from anything other than EL3.
How so? This statement basically says "Only return to HYP from NS-HYP or EL3" now. Before it said "Only return to HYP from HYP".
Alex
Quoted 8 lines
Quoted 4 lines
target/arm/helper.c +0
-0case ARM_CPU_MODE_MON :return arm_current_el (env) <3 ;default:
--
Alex Bennée
Quoted 9 lines · Alex Bennée
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
What EL is MON in this case? EL3?
Mon is an AArch32 term and EL is really AArch64, but in practice Mon is always (Secure) EL3. Note that if EL3 is AArch32 then S-SVC is *also* EL3 !
thanks
-- PMM
Quoted 23 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
The reason seems to be that we try to see whether we are entering HYP mode from the NS side. However, MON is always considered secure, so we always fall into an error case when going
MON->HYPand never manage to actually do the switch.Fix this by not using a different helper function that does not bork when we're in MON state, as that switch is supposed to work.
Signed-off-by Alexander Graf <[email protected]>--- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)target/arm/helper.c +0
-0
target/arm/helper.c static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
Quoted 9 lines
target/arm/helper.c +1
-2@@ -6297,7 +6297,7 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)return 0 ;case ARM_CPU_MODE_HYP :return !arm_feature (env,ARM_FEATURE_EL2 ) - ||arm_current_el (env) <2 ||arm_is_secure (env); + ||arm_current_el (env) <2 ||arm_is_secure_below_el3 (env);case ARM_CPU_MODE_MON :return arm_current_el (env) <3 ;default : --
This took me a while to figure out, because the bad_mode_switch() code is called for doing checks in two situations:
(1) changes to mode by instructions writing to
CPSR.M (ie not exception take/return) -- this corresponds to the Armv8 Arm ARM pseudocode AArch32.WriteModeByInstr, and using this to enter or leave Hyp mode is forbidden in v8 and UNPREDICTABLE in v7
(2) changes to mode by exception return
Changing to or from Hyp by writing CPSR.M is forbidden, but we catch that already at the top of the bad_mode_switch() function. So what we need to consider here is the exception-return case. An exception return from Mon to Hyp with the NS bit 0 is OK. So this change is the right thing.
thanks
-- PMM
Quoted 6 lines · Peter Maydell
Quoted 4 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
PS: it would be helpful if the commit message said how u-boot is trying to go from Mon to Hyp -- some ways to try to do this are OK, and some are not, so whether it's supposed to work or not depends on what u-boot is actually doing...
thanks
-- PMM
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Peter Maydell
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
PS: it would be helpful if the commit message said how u-boot is trying to go from Mon to Hyp -- some ways to try to do this are OK, and some are not, so whether it's supposed to work or not depends on what u-boot is actually doing...
I don't fully understand all of it to be honest :). But the code is here:
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/nonsec_virt.S
What I managed to understand so far is that it goes to MON using the smc #0 call and then changes SPSR so that on return (movs pc) the mode will be different.
But please double check whether this is supposed to work - I don't find mode switching on ARM terribly intuitive ;).
Alex
Quoted 12 lines · Alexander Graf
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Peter Maydell
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
PS: it would be helpful if the commit message said how u-boot is trying to go from Mon to Hyp -- some ways to try to do this are OK, and some are not, so whether it's supposed to work or not depends on what u-boot is actually doing...
Quoted 7 lines
I don't fully understand all of it to be honest :). But the code is here:
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/nonsec_virt.S
What I managed to understand so far is that it goes to MON using the smc #0 call and then changes SPSR so that on return (movs pc) the mode will be different.
Thanks -- yes, that's an exception return so it's the expected way to go from Mon to Hyp.
-- PMM
Quoted 15 lines · Peter Maydell
Quoted 14 lines · Alexander Graf
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Peter Maydell
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
PS: it would be helpful if the commit message said how u-boot is trying to go from Mon to Hyp -- some ways to try to do this are OK, and some are not, so whether it's supposed to work or not depends on what u-boot is actually doing...
I don't fully understand all of it to be honest :). But the code is here:
Quoted 8 lines
Quoted 5 lines
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/nonsec_virt.S
What I managed to understand so far is that it goes to MON using the smc #0 call and then changes SPSR so that on return (movs pc) the mode will be different.
Thanks -- yes, that's an exception return so it's the expected way to go from Mon to Hyp.
That was my understanding, yes. Do you still want me to change the commit message to mention that or will you just do it when applying?
Thanks,
Alex
Quoted 25 lines · Alexander Graf
Quoted 21 lines · Peter Maydell
Quoted 19 lines · Alexander Graf
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Peter Maydell
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
PS: it would be helpful if the commit message said how u-boot is trying to go from Mon to Hyp -- some ways to try to do this are OK, and some are not, so whether it's supposed to work or not depends on what u-boot is actually doing...
I don't fully understand all of it to be honest :). But the code is here:
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/nonsec_virt.S
What I managed to understand so far is that it goes to MON using the smc #0 call and then changes SPSR so that on return (movs pc) the mode will be different.
Quoted 5 lines
Quoted 2 lines
Thanks -- yes, that's an exception return so it's the expected way to go from Mon to Hyp.
That was my understanding, yes. Do you still want me to change the commit message to mention that or will you just do it when applying?
I'll add a note when I apply it; thanks.
-- PMM
Quoted 27 lines · Peter Maydell
Quoted 25 lines · Alexander Graf
Quoted 21 lines · Peter Maydell
Quoted 19 lines · Alexander Graf
Quoted 9 lines · Peter Maydell
Quoted 4 lines · Peter Maydell
Quoted 3 lines · Alexander Graf
In U-boot, we switch from S-SVC -> MON -> HYP when we want to enter HYP mode. This dance seems to work ok (hence it's there in the code base), but breaks with current QEMU.
PS: it would be helpful if the commit message said how u-boot is trying to go from Mon to Hyp -- some ways to try to do this are OK, and some are not, so whether it's supposed to work or not depends on what u-boot is actually doing...
I don't fully understand all of it to be honest :). But the code is here:
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/nonsec_virt.S
What I managed to understand so far is that it goes to MON using the smc #0 call and then changes SPSR so that on return (movs pc) the mode will be different.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Thanks -- yes, that's an exception return so it's the expected way to go from Mon to Hyp.
That was my understanding, yes. Do you still want me to change the commit message to mention that or will you just do it when applying?
I'll add a note when I apply it; thanks.
Now applied to target-arm.next with a rewritten commit message; thanks.
-- PMM