Skip to contentSkip to conversation

arm64: dts: marvell: mcbin: fix eth3 connector name

PATCH New Baruch Siach 2 participants 2 messages Jun 24, 2018 – Jun 27, 2018

Subsystems (3)
Device tree bindings Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support Marvell macchiatobin support
lore
Share & tools
lore

Baruch Siach

author
#0 lore raw

PATCH 1/1 arm64: dts: marvell: mcbin: fix eth3 connector name

The right most SFP connector on the Macchiatobin board and schematics is marked as CON13/CON14.

Signed-off-by Baruch Siach <[email protected]>
---
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +1 -1
index a66958ff4de6..56fa44860909 100644
@@ -91,7 +91,7 @@
 	};
 
 	sfp_eth3: sfp-eth3 {
-		/* CON3,4 - CPS lane 5 */
+		/* CON13,14 - CPS lane 5 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfp_1g_i2c>;
 		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
Signature · 1 line
2.17.1
maintainer
#1 lore raw

PATCH 1/1 arm64: dts: marvell: mcbin: fix eth3 connector name

Hi Baruch,

Quoted 4 lines · Baruch Siach

The right most SFP connector on the Macchiatobin board and schematics is marked as CON13/CON14.

Signed-off-by Baruch Siach <[email protected]>

Applied on mvebu/dt64

Thanks,

Gregory

Quoted 20 lines
---
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +1 -1
index a66958ff4de6..56fa44860909 100644
@@ -91,7 +91,7 @@
 	};
 
 	sfp_eth3: sfp-eth3 {
-		/* CON3,4 - CPS lane 5 */
+		/* CON13,14 - CPS lane 5 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfp_1g_i2c>;
 		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
Signature · 1 line
2.17.1
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com