Skip to contentSkip to conversation

ARM: mvebu: add Kirkwood cpuidle to defconfig

PATCH Applied Linus Walleij 2 participants 2 messages Nov 25, 2015 – Nov 30, 2015

Subsystems (2)
Arm (32-bit) Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support
lore
Share & tools
lore

Linus Walleij

author
#0 lore raw

PATCH 2/2 ARM: mvebu: add Kirkwood cpuidle to defconfig

The Kirkwood v5 platforms need their CPUIDLE driver, so put it into the defconfig.

Signed-off-by Linus Walleij <[email protected]>
---
 arch/arm/configs/mvebu_v5_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/mvebu_v5_defconfig +1 -0
index 519c72725798..aa9079c84024 100644
@@ -25,6 +25,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
Signature · 1 line
2.4.3
#1 lore raw

PATCH 2/2 ARM: mvebu: add Kirkwood cpuidle to defconfig

Hi Linus,

Quoted 4 lines · Linus Walleij

The Kirkwood v5 platforms need their CPUIDLE driver, so put it into the defconfig.

Signed-off-by Linus Walleij <[email protected]>

Applied on mvebu/defconfig

Thanks,

Gregory

Quoted 19 lines
---
 arch/arm/configs/mvebu_v5_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/mvebu_v5_defconfig +1 -0
index 519c72725798..aa9079c84024 100644
@@ -25,6 +25,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
Signature · 1 line
2.4.3
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com