Skip to contentSkip to conversation

defconfigs: zedboard add info about uboot installation

PATCH New Spenser Gilliland 2 participants 2 messages Feb 7, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 defconfigs: zedboard add info about uboot installation

Add info about how to install a custom uboot on the zedboard.

---
 board/avnet/zedboard/readme.txt |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)
board/avnet/zedboard/readme.txt +15 -0
index b869066..6b6df36 100644
@@ -11,3 +11,18 @@ to the sdcard:
 	rootfs.cpio.gz.uboot -> uramdisk.image.gz
 	uImage -> uImage
 
+Uboot Support
+-------------
+
+Uboot is installed in a wrapper file called BOOT.BIN located on the root of
+the SD card.  To create the BOOT.BIN file do the following.
+
+source <path/to/xilinx/settings.sh>
+cat <<EOF > boot.bif
+{
+   [bootloader]<path/to/fsbl.elf>
+   <path/to/system.bit>
+   <path/to/uboot.elf>
+}
+EOF
+bootgen -image boot.bif -o i BOOT.BIN
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 defconfigs: zedboard add info about uboot installation

Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Spenser" == Spenser Gilliland <[email protected]> writes:

Add info about how to install a custom uboot on the zedboard.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard