drm/panel: Add Anbernic RG353V-V2 Panel

PATCH Applied Chris Morgan 4 participants 9 messages Apr 26, 2023 – Aug 6, 2023

Subsystems (5)

Device tree bindings DRM drivers DRM misc DRM panel drivers +1 more subsystems

lore

Share & tools

lore

Chris Morgan

author

2023-04-26 14:32 UTC #0 lore raw

v3 cover drm/panel: Add Anbernic RG353V-V2 Panel

From: Chris Morgan <[email protected]>

Add the NewVision NV3051D panel as found on the second revision of the RG353V. The underlying LCD panel itself is unknown (ST7703 is the controller IC).

Changes from V2:
- Rebased patch series (to address removal of dsi_dcs_write_seq custom macro).

Changes from V1:
- Split redefinition of CMD_UNKNOWN_C6 into separate patch.

Chris Morgan (3):
dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO drm/panel: st7703: Add Anbernic RG353V-V2 Panel Support

 .../display/panel/rocktech,jh057n00900.yaml   |   2 +
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 102 +++++++++++++++++-
 2 files changed, 101 insertions(+), 3 deletions(-)

Signature · 1 line

2.34.1

Chris Morgan

author

2023-04-26 14:32 UTC #1 lore raw

PATCH v3 1/3 dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

From: Chris Morgan <[email protected]>

The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel. It's based on the ST7703 LCD controller just like rocktech,jh057n00900. It's used in a 2nd revision of the Anbernic RG353V handheld gaming device. Like the first revision of the RG353V the control chip is known but the panel itself is unknown, so name it for the device.

Signed-off-by Chris Morgan <[email protected]>

Acked-by Krzysztof Kozlowski <[email protected]>

Acked-by Guido Günther <[email protected]>

---
 .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 ++
 1 file changed, 2 insertions(+)

Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +2 -0

index 09b5eb7542f8..150e81090af2 100644
@@ -20,6 +20,8 @@ allOf:
 properties:
   compatible:
     enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
       # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel

Signature · 1 line

2.34.1

Chris Morgan

author

2023-04-26 14:32 UTC #2 lore raw

PATCH v3 2/3 drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO

In reply to Chris Morgan

From: Chris Morgan <[email protected]>

A later revision of the datasheet for the ST7703 refers to this command as "SETECO".

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +2 -3

index 6747ca237ced..fc55b5fbb67f 100644
@@ -41,8 +41,8 @@
 #define ST7703_CMD_UNKNOWN_BF	 0xBF
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_SETECO	 0xC6
 #define ST7703_CMD_SETPANEL	 0xCC
-#define ST7703_CMD_UNKNOWN_C6	 0xC6
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9

@@ -249,8 +249,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
 				      * ESD_DET_TIME_SEL = 0 frames
 				      */);
 
-	/* Undocumented command. */
-	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
 
 	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
 			       0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */

Signature · 1 line

2.34.1

Chris Morgan

author

2023-04-26 14:32 UTC #3 lore raw

PATCH v3 3/3 drm/panel: st7703: Add Anbernic RG353V-V2 Panel Support

In reply to Chris Morgan

From: Chris Morgan <[email protected]>

The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the Anbernic RG353V handheld gaming device. Add support for it.

Unfortunately it appears this controller is not able to support 120hz or 100hz mode like the first revision panel.

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +97 -0

index fc55b5fbb67f..3aa31f3d6157 100644
@@ -28,6 +28,7 @@
 /* Manufacturer specific Commands send via DSI */
 #define ST7703_CMD_ALL_PIXEL_OFF 0x22
 #define ST7703_CMD_ALL_PIXEL_ON	 0x23
+#define ST7703_CMD_SETAPID	 0xB1
 #define ST7703_CMD_SETDISP	 0xB2
 #define ST7703_CMD_SETRGBIF	 0xB3
 #define ST7703_CMD_SETCYC	 0xB4

@@ -42,11 +43,14 @@
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
 #define ST7703_CMD_SETECO	 0xC6
+#define ST7703_CMD_SETIO	 0xC7
+#define ST7703_CMD_SETCABC	 0xC8
 #define ST7703_CMD_SETPANEL	 0xCC
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9
 #define ST7703_CMD_SETGIP2	 0xEA
+#define ST7703_CMD_UNKNOWN_EF	 0xEF
 
 struct st7703 {
 	struct device *dev;

@@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = {
 	.init_sequence = xbd599_init_sequence,
 };
 
+static int rg353v2_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
+			       0xda, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
+			       0xf0, 0x63);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
+			       0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
+			       0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+			       0x00, 0x00, 0x12, 0x50, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
+			       0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
+			       0x33);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+			       0x00, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+			       0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+			       0x02);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
+			       0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
+			       0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
+			       0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
+			       0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
+			       0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+			       0xc0, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
+			       0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
+			       0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
+			       0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
+			       0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
+			       0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
+			       0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
+			       0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
+			       0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+	return 0;
+}
+
+static const struct drm_display_mode rg353v2_mode = {
+	.hdisplay	= 640,
+	.hsync_start	= 640 + 40,
+	.hsync_end	= 640 + 40 + 2,
+	.htotal		= 640 + 40 + 2 + 80,
+	.vdisplay	= 480,
+	.vsync_start	= 480 + 18,
+	.vsync_end	= 480 + 18 + 2,
+	.vtotal		= 480 + 18 + 2 + 28,
+	.clock		= 24150,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 70,
+	.height_mm	= 57,
+};
+
+static const struct st7703_panel_desc rg353v2_desc = {
+	.mode = &rg353v2_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = rg353v2_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);

@@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id st7703_of_match[] = {
+	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
 	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
 	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
 	{ /* sentinel */ }

Signature · 1 line

2.34.1

Guido Günther

2023-04-26 15:01 UTC #4 lore raw

Re: [PATCH V3 1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

Hi Chris,
could you check if these two modifications by Frank of the init sequence

https://lore.kernel.org/dri-devel/[email protected]/
https://lore.kernel.org/dri-devel/[email protected]/

work for your panel too?
Cheers,
-- Guido

Quoted 31 lines · Chris Morgan

From: Chris Morgan <[email protected]>
The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel. It's based on the ST7703 LCD controller just like rocktech,jh057n00900. It's used in a 2nd revision of the Anbernic RG353V handheld gaming device. Like the first revision of the RG353V the control chip is known but the panel itself is unknown, so name it for the device.
Signed-off-by Chris Morgan <[email protected]>
Acked-by Krzysztof Kozlowski <[email protected]>
Acked-by Guido Günther <[email protected]>
---
 .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +2 -0
index 09b5eb7542f8..150e81090af2 100644
@@ -20,6 +20,8 @@ allOf:
 properties:
   compatible:
     enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
       # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
Signature · 1 line
2.34.1

Quoted 38 lines · Chris Morgan

From: Chris Morgan <[email protected]>

A later revision of the datasheet for the ST7703 refers to this command as "SETECO".

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +2 -3

index 6747ca237ced..fc55b5fbb67f 100644
@@ -41,8 +41,8 @@
 #define ST7703_CMD_UNKNOWN_BF	 0xBF
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_SETECO	 0xC6
 #define ST7703_CMD_SETPANEL	 0xCC
-#define ST7703_CMD_UNKNOWN_C6	 0xC6
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9

@@ -249,8 +249,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
 				      * ESD_DET_TIME_SEL = 0 frames
 				      */);
 
-	/* Undocumented command. */
-	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
 
 	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
 			       0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */

Signature · 1 line

2.34.1

Quoted 151 lines · Chris Morgan

From: Chris Morgan <[email protected]>

The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the Anbernic RG353V handheld gaming device. Add support for it.

Unfortunately it appears this controller is not able to support 120hz or 100hz mode like the first revision panel.

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +97 -0

index fc55b5fbb67f..3aa31f3d6157 100644
@@ -28,6 +28,7 @@
 /* Manufacturer specific Commands send via DSI */
 #define ST7703_CMD_ALL_PIXEL_OFF 0x22
 #define ST7703_CMD_ALL_PIXEL_ON	 0x23
+#define ST7703_CMD_SETAPID	 0xB1
 #define ST7703_CMD_SETDISP	 0xB2
 #define ST7703_CMD_SETRGBIF	 0xB3
 #define ST7703_CMD_SETCYC	 0xB4

@@ -42,11 +43,14 @@
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
 #define ST7703_CMD_SETECO	 0xC6
+#define ST7703_CMD_SETIO	 0xC7
+#define ST7703_CMD_SETCABC	 0xC8
 #define ST7703_CMD_SETPANEL	 0xCC
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9
 #define ST7703_CMD_SETGIP2	 0xEA
+#define ST7703_CMD_UNKNOWN_EF	 0xEF
 
 struct st7703 {
 	struct device *dev;

@@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = {
 	.init_sequence = xbd599_init_sequence,
 };
 
+static int rg353v2_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
+			       0xda, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
+			       0xf0, 0x63);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
+			       0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
+			       0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+			       0x00, 0x00, 0x12, 0x50, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
+			       0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
+			       0x33);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+			       0x00, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+			       0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+			       0x02);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
+			       0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
+			       0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
+			       0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
+			       0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
+			       0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+			       0xc0, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
+			       0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
+			       0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
+			       0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
+			       0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
+			       0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
+			       0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
+			       0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
+			       0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+	return 0;
+}
+
+static const struct drm_display_mode rg353v2_mode = {
+	.hdisplay	= 640,
+	.hsync_start	= 640 + 40,
+	.hsync_end	= 640 + 40 + 2,
+	.htotal		= 640 + 40 + 2 + 80,
+	.vdisplay	= 480,
+	.vsync_start	= 480 + 18,
+	.vsync_end	= 480 + 18 + 2,
+	.vtotal		= 480 + 18 + 2 + 28,
+	.clock		= 24150,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 70,
+	.height_mm	= 57,
+};
+
+static const struct st7703_panel_desc rg353v2_desc = {
+	.mode = &rg353v2_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = rg353v2_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);

@@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id st7703_of_match[] = {
+	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
 	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
 	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
 	{ /* sentinel */ }

Signature · 1 line

2.34.1

Frank Oltmanns

2023-06-06 07:21 UTC #5 lore raw

Re: [PATCH V3 1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

Hi Chris,
hi Guido,

Quoted 7 lines · Guido Günther

Hi Chris,
could you check if these two modifications by Frank of the init sequence
   https://lore.kernel.org/dri-devel/[email protected]/
   https://lore.kernel.org/dri-devel/[email protected]/
work for your panel too?

I saw that Chris' patchset got accepted into drm-next, and I'm glad that more panels will therefore work out of the box. But: Did anyone check if the modifications I submitted in February and that Guido referenced above work with the new panel?

Thanks,
Frank

Quoted 228 lines

Cheers,
-- Guido

Quoted 31 lines · Chris Morgan

From: Chris Morgan <[email protected]>
The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel. It's based on the ST7703 LCD controller just like rocktech,jh057n00900. It's used in a 2nd revision of the Anbernic RG353V handheld gaming device. Like the first revision of the RG353V the control chip is known but the panel itself is unknown, so name it for the device.
Signed-off-by Chris Morgan <[email protected]>
Acked-by Krzysztof Kozlowski <[email protected]>
Acked-by Guido Günther <[email protected]>
---
 .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +2 -1
index 09b5eb7542f8..150e81090af2 100644
@@ -20,6 +20,8 @@ allOf:
 properties:
   compatible:
     enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
       # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
--
2.34.1

Quoted 38 lines · Chris Morgan

From: Chris Morgan <[email protected]>

A later revision of the datasheet for the ST7703 refers to this command as "SETECO".

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +2 -4

index 6747ca237ced..fc55b5fbb67f 100644
@@ -41,8 +41,8 @@
 #define ST7703_CMD_UNKNOWN_BF	 0xBF
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_SETECO	 0xC6
 #define ST7703_CMD_SETPANEL	 0xCC
-#define ST7703_CMD_UNKNOWN_C6	 0xC6
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9

@@ -249,8 +249,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
 				      * ESD_DET_TIME_SEL = 0 frames
 				      */);
 
-	/* Undocumented command. */
-	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
 
 	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
 			       0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
--

2.34.1

Quoted 151 lines · Chris Morgan

From: Chris Morgan <[email protected]>

The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the Anbernic RG353V handheld gaming device. Add support for it.

Unfortunately it appears this controller is not able to support 120hz or 100hz mode like the first revision panel.

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +97 -1

index fc55b5fbb67f..3aa31f3d6157 100644
@@ -28,6 +28,7 @@
 /* Manufacturer specific Commands send via DSI */
 #define ST7703_CMD_ALL_PIXEL_OFF 0x22
 #define ST7703_CMD_ALL_PIXEL_ON	 0x23
+#define ST7703_CMD_SETAPID	 0xB1
 #define ST7703_CMD_SETDISP	 0xB2
 #define ST7703_CMD_SETRGBIF	 0xB3
 #define ST7703_CMD_SETCYC	 0xB4

@@ -42,11 +43,14 @@
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
 #define ST7703_CMD_SETECO	 0xC6
+#define ST7703_CMD_SETIO	 0xC7
+#define ST7703_CMD_SETCABC	 0xC8
 #define ST7703_CMD_SETPANEL	 0xCC
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9
 #define ST7703_CMD_SETGIP2	 0xEA
+#define ST7703_CMD_UNKNOWN_EF	 0xEF
 
 struct st7703 {
 	struct device *dev;

@@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = {
 	.init_sequence = xbd599_init_sequence,
 };
 
+static int rg353v2_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
+			       0xda, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
+			       0xf0, 0x63);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
+			       0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
+			       0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+			       0x00, 0x00, 0x12, 0x50, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
+			       0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
+			       0x33);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+			       0x00, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+			       0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+			       0x02);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
+			       0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
+			       0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
+			       0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
+			       0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
+			       0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+			       0xc0, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
+			       0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
+			       0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
+			       0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
+			       0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
+			       0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
+			       0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
+			       0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
+			       0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+	return 0;
+}
+
+static const struct drm_display_mode rg353v2_mode = {
+	.hdisplay	= 640,
+	.hsync_start	= 640 + 40,
+	.hsync_end	= 640 + 40 + 2,
+	.htotal		= 640 + 40 + 2 + 80,
+	.vdisplay	= 480,
+	.vsync_start	= 480 + 18,
+	.vsync_end	= 480 + 18 + 2,
+	.vtotal		= 480 + 18 + 2 + 28,
+	.clock		= 24150,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 70,
+	.height_mm	= 57,
+};
+
+static const struct st7703_panel_desc rg353v2_desc = {
+	.mode = &rg353v2_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = rg353v2_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);

@@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id st7703_of_match[] = {
+	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
 	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
 	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
 	{ /* sentinel */ }
--

2.34.1

Frank Oltmanns

2023-08-06 12:49 UTC #6 lore raw

Re: [PATCH V3 1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

Hi Chris,
hi Guido,

Quoted 10 lines · Frank Oltmanns

Hi Chris,
hi Guido,
Quoted 6 lines · Guido Günther
Hi Chris,
could you check if these two modifications by Frank of the init sequence
   https://lore.kernel.org/dri-devel/[email protected]/
   https://lore.kernel.org/dri-devel/[email protected]/

Quoted 6 lines

Quoted 1 line
work for your panel too?
I saw that Chris' patchset got accepted into drm-next, and I'm glad that more panels will therefore work out of the box. But: Did anyone check if the modifications I submitted in February and that Guido referenced above work with the new panel?

Chris, could you please check that the new rg353v-panel-v2 works with the changes I proposed.

Guido, could you please check that the jh057n00900 panel works with the changes I proposed.

Without these patches the XBD599 panel does not work reliably, so in the long run it's desirable to include them in mainline. Currently, the only user of the XBD599 panel that I'm aware of is the pinephone. Therefore, all distributions supporting the pinephone rely on out-of-tree patches to support the XDB599 panel.

I'd appreciate if we could rectify this situation.

Thank you both for your support,
Frank

Quoted 231 lines

Thanks,
Frank

Quoted 228 lines

Cheers,
-- Guido

Quoted 31 lines · Chris Morgan

From: Chris Morgan <[email protected]>
The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel. It's based on the ST7703 LCD controller just like rocktech,jh057n00900. It's used in a 2nd revision of the Anbernic RG353V handheld gaming device. Like the first revision of the RG353V the control chip is known but the panel itself is unknown, so name it for the device.
Signed-off-by Chris Morgan <[email protected]>
Acked-by Krzysztof Kozlowski <[email protected]>
Acked-by Guido Günther <[email protected]>
---
 .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +2 -1
index 09b5eb7542f8..150e81090af2 100644
@@ -20,6 +20,8 @@ allOf:
 properties:
   compatible:
     enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
       # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
--
2.34.1

Quoted 38 lines · Chris Morgan

From: Chris Morgan <[email protected]>

A later revision of the datasheet for the ST7703 refers to this command as "SETECO".

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +2 -4

index 6747ca237ced..fc55b5fbb67f 100644
@@ -41,8 +41,8 @@
 #define ST7703_CMD_UNKNOWN_BF	 0xBF
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_SETECO	 0xC6
 #define ST7703_CMD_SETPANEL	 0xCC
-#define ST7703_CMD_UNKNOWN_C6	 0xC6
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9

@@ -249,8 +249,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
 				      * ESD_DET_TIME_SEL = 0 frames
 				      */);
 
-	/* Undocumented command. */
-	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
 
 	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
 			       0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
--

2.34.1

Quoted 151 lines · Chris Morgan

From: Chris Morgan <[email protected]>

The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the Anbernic RG353V handheld gaming device. Add support for it.

Unfortunately it appears this controller is not able to support 120hz or 100hz mode like the first revision panel.

Signed-off-by Chris Morgan <[email protected]>

Reviewed-by Guido Günther <[email protected]>

---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)

drivers/gpu/drm/panel/panel-sitronix-st7703.c +97 -1

index fc55b5fbb67f..3aa31f3d6157 100644
@@ -28,6 +28,7 @@
 /* Manufacturer specific Commands send via DSI */
 #define ST7703_CMD_ALL_PIXEL_OFF 0x22
 #define ST7703_CMD_ALL_PIXEL_ON	 0x23
+#define ST7703_CMD_SETAPID	 0xB1
 #define ST7703_CMD_SETDISP	 0xB2
 #define ST7703_CMD_SETRGBIF	 0xB3
 #define ST7703_CMD_SETCYC	 0xB4

@@ -42,11 +43,14 @@
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
 #define ST7703_CMD_SETECO	 0xC6
+#define ST7703_CMD_SETIO	 0xC7
+#define ST7703_CMD_SETCABC	 0xC8
 #define ST7703_CMD_SETPANEL	 0xCC
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9
 #define ST7703_CMD_SETGIP2	 0xEA
+#define ST7703_CMD_UNKNOWN_EF	 0xEF
 
 struct st7703 {
 	struct device *dev;

@@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = {
 	.init_sequence = xbd599_init_sequence,
 };
 
+static int rg353v2_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
+			       0xda, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
+			       0xf0, 0x63);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
+			       0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
+			       0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+			       0x00, 0x00, 0x12, 0x50, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
+			       0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
+			       0x33);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+			       0x00, 0xff);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+			       0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+			       0x02);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
+			       0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
+			       0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
+			       0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
+			       0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
+			       0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+			       0xc0, 0x10);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
+			       0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
+			       0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
+			       0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
+			       0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
+			       0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
+			       0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
+			       0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
+			       0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
+			       0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
+			       0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			       0x00);
+	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+	return 0;
+}
+
+static const struct drm_display_mode rg353v2_mode = {
+	.hdisplay	= 640,
+	.hsync_start	= 640 + 40,
+	.hsync_end	= 640 + 40 + 2,
+	.htotal		= 640 + 40 + 2 + 80,
+	.vdisplay	= 480,
+	.vsync_start	= 480 + 18,
+	.vsync_end	= 480 + 18 + 2,
+	.vtotal		= 480 + 18 + 2 + 28,
+	.clock		= 24150,
+	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm	= 70,
+	.height_mm	= 57,
+};
+
+static const struct st7703_panel_desc rg353v2_desc = {
+	.mode = &rg353v2_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = rg353v2_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);

@@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id st7703_of_match[] = {
+	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
 	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
 	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
 	{ /* sentinel */ }
--

2.34.1

Neil Armstrong

maintainer Applied

2023-04-27 11:47 UTC #7 lore raw

In reply to Chris Morgan

Hi,

Quoted 11 lines · Chris Morgan

From: Chris Morgan <[email protected]>
Add the NewVision NV3051D panel as found on the second revision of the RG353V. The underlying LCD panel itself is unknown (ST7703 is the controller IC).
Changes from V2:
- Rebased patch series (to address removal of dsi_dcs_write_seq custom macro).
[...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next-fixes)

[1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e41fef1e43ae86aecc466e8c9e449d7bf71596a7
[2/3] drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e0310564a7e31d7359a6831226aa9b559c6728a0
[3/3] drm/panel: st7703: Add Anbernic RG353V-V2 Panel Support
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=0ed9208cb120086f1b600199c548f00544406fa5

Signature · 1 line

Neil

Neil Armstrong

maintainer

2023-04-27 11:49 UTC #8 lore raw

Quoted 9 lines · Neil Armstrong

Hi,
Quoted 6 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add the NewVision NV3051D panel as found on the second revision of the RG353V. The underlying LCD panel itself is unknown (ST7703 is the controller IC).

Quoted 7 lines

Quoted 5 lines
Changes from V2:
- Rebased patch series (to address removal of dsi_dcs_write_seq custom
    macro).
[...]
Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next-fixes)

Ok, again b4 picks the wrong branch name, it's drm-misc-next here.

Neil

Quoted 8 lines

[1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

       https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e41fef1e43ae86aecc466e8c9e449d7bf71596a7
[2/3] drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO
       https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e0310564a7e31d7359a6831226aa9b559c6728a0
[3/3] drm/panel: st7703: Add Anbernic RG353V-V2 Panel Support
       https://cgit.freedesktop.org/drm/drm-misc/commit/?id=0ed9208cb120086f1b600199c548f00544406fa5