ext2: DIO to use iomap
Subsystems (4)
Ritesh Harjani (IBM)
reviewerv4 cover ext2: DIO to use iomap
Please find the series which rewrites ext2 direct-io path to use modern iomap interface.
RFCv3 -> RFCV4:
===============
1. Renamed __generic_file_fsync_nolock() from libfs to generic_buffer_fsync() in fs/buffer.c
(Review comment from Christoph)
2. Fixed s/EVENTD/EVENTFD/ in TRACE_IOCB_STRINGS
3. Fixed few data types for parameters in ext2 trace patch (size_t && ssize_t)
4. Killed this patch "Minor refactor of iomap_dio_rw"
5. Changed iomap tracepoint patch and fixed the data types (size_t && ssize_t) (addressed review comments from Christoph)
RFCv2 -> RFCv3:
===============
1. Addressed minor review comments related to extern, parameter naming in function declaration, removing not required braces and shorting overly long lines.
2. Added Reviewed-by from various reviewers.
3. Fixed a warning & couple of compilation errors in Patch-7 (ext2 trace points) related to CFLAGS_trace & second related to unable to find function definition for iov_iter_count(). (requires uio.h file) CFLAGS_trace is required in Makefile so that it can find trace.h file from tracepoint infrastructure.
4. Changed naming of IOCB_STRINGS TO TRACE_IOCB_STRINGS.
5. Shortened naming of tracepoint events for ext2 dio.
6. Added iomap DIO tracepoint events.
7. Disha tested this series internally against Power with "auto" group for 4k and 64k blocksize configuration. Added her "Tested-by" tag in all DIO related patches. No new failures were reported.
Thanks everyone for the review and test. The series is looking good to me now. It has now been tested on x86 and Power with different configurations. Please let me know if anything else is required on this.
v2: https://lore.kernel.org/all/[email protected]/
Ritesh Harjani (IBM) (9):
ext2/dax: Fix ext2_setsize when len is page aligned fs/buffer.c: Add generic_buffer_fsync implementation
ext4: Use generic_buffer_fsync() implementation
ext2: Use generic_buffer_fsync() implementation
ext2: Move direct-io to use iomap
fs.h: Add TRACE_IOCB_STRINGS for use in trace points
ext2: Add direct-io trace points
iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
iomap: Add couple of DIO tracepoints
fs/buffer.c | 43 ++++++++++++ fs/ext2/Makefile | 5 +- fs/ext2/ext2.h | 1 + fs/ext2/file.c | 128 +++++++++++++++++++++++++++++++++++- fs/ext2/inode.c | 58 +++++++++------- fs/ext2/trace.c | 6 ++ fs/ext2/trace.h | 94 ++++++++++++++++++++++++++ fs/ext4/fsync.c | 32 ++++----- fs/iomap/direct-io.c | 7 +- fs/iomap/trace.c | 1 + fs/iomap/trace.h | 35 ++++++++++ include/linux/buffer_head.h | 2 + include/linux/fs.h | 14 ++++ include/linux/iomap.h | 6 -- 14 files changed, 384 insertions(+), 48 deletions(-) create mode 100644 fs/ext2/trace.c create mode 100644 fs/ext2/trace.h
--
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 1/9 ext2/dax: Fix ext2_setsize when len is page aligned
PAGE_ALIGN(x) macro gives the next highest value which is multiple of pagesize. But if x is already page aligned then it simply returns x. So, if x passed is 0 in dax_zero_range() function, that means the length gets passed as 0 to ->iomap_begin().
In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on here in ext2_get_blocks().
BUG_ON(maxblocks == 0);
Instead we should be calling dax_truncate_page() here which takes care of it. i.e. it only calls dax_zero_range if the offset is not page/block aligned.
This can be easily triggered with following on fsdax mounted pmem device.
dd if=/dev/zero of=file count=1 bs=512
truncate -s 0 file
[79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff) [93.793207] ------------[ cut here ]------------ [93.795102] kernel BUG at fs/ext2/inode.c:637! [93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI [93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139 [93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610 <...> [93.835298] Call Trace: [93.836253] <TASK> [93.837103] ? lock_acquire+0xf8/0x110 [93.838479] ? d_lookup+0x69/0xd0 [93.839779] ext2_iomap_begin+0xa7/0x1c0 [93.841154] iomap_iter+0xc7/0x150 [93.842425] dax_zero_range+0x6e/0xa0 [93.843813] ext2_setsize+0x176/0x1b0 [93.845164] ext2_setattr+0x151/0x200 [93.846467] notify_change+0x341/0x4e0 [93.847805] ? lock_acquire+0xf8/0x110 [93.849143] ? do_truncate+0x74/0xe0 [93.850452] ? do_truncate+0x84/0xe0 [93.851739] do_truncate+0x84/0xe0 [93.852974] do_sys_ftruncate+0x2b4/0x2f0 [93.854404] do_syscall_64+0x3f/0x90 [93.855789] entry_SYSCALL_64_after_hwframe+0x72/0xdc
--- fs/ext2/inode.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
fs/ext2/inode.c +2 -3
@@ -1259,9 +1259,8 @@ static int ext2_setsize(struct inode *inode, loff_t newsize)inode_dio_wait (inode);if (IS_DAX (inode)) - error =dax_zero_range (inode, newsize, -PAGE_ALIGN (newsize) - newsize,NULL , - &ext2_iomap_ops); + error =dax_truncate_page (inode, newsize,NULL , + &ext2_iomap_ops);else error =block_truncate_page (inode->i_mapping, newsize, ext2_get_block);
Signature · 1 line
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 2/9 fs/buffer.c: Add generic_buffer_fsync implementation
In reply to Ritesh Harjani (IBM)Some of the higher layers like iomap takes inode_lock() when calling generic_write_sync().
Also writeback already happens from other paths without inode lock, so it's difficult to say that we really need sync_mapping_buffers() to take any inode locking here. Having said that, let's add generic_buffer_fsync() implementation in buffer.c with no inode_lock/unlock() for now so that filesystems like ext2 and ext4's nojournal mode can use it.
Ext4 when got converted to iomap for direct-io already copied it's own variant of __generic_file_fsync() without lock. Hence let's add a helper API and use it both in ext2 and ext4.
Later we can review other filesystems as well to see if we can make generic_buffer_fsync() which does not take any inode_lock() as the default path.
--- fs/buffer.c | 43 +++++++++++++++++++++++++++++++++++++ include/linux/buffer_head.h | 2 ++ 2 files changed, 45 insertions(+)
fs/buffer.c +43 -0
@@ -593,6 +593,49 @@ int sync_mapping_buffers(struct address_space *mapping) }EXPORT_SYMBOL (sync_mapping_buffers); +/** +* generic_buffer_fsync - generic buffer fsync implementation +* for simple filesystems with no inode lock +* +* @file: file to synchronize +* @start: start offset in bytes +* @end: end offset in bytes (inclusive) +* @datasync: only synchronize essential metadata if true +* +* This is a generic implementation of the fsync method for simple +* filesystems which track all non-inode metadata in the buffers list +* hanging off the address_space structure. +*/ +int generic_buffer_fsync (struct file *file,loff_t start,loff_t end, +bool datasync) +{ +struct inode *inode = file->f_mapping->host; +int err; +int ret; + + err =file_write_and_wait_range (file, start, end); +if (err) +return err; + + ret =sync_mapping_buffers (inode->i_mapping); +if (!(inode->i_state &I_DIRTY_ALL )) + goto out; +if (datasync && !(inode->i_state &I_DIRTY_DATASYNC )) + goto out; + + err =sync_inode_metadata (inode,1 ); +if (ret ==0 ) + ret = err; + +out: +/* check and advance again to catch errors after syncing out buffers */ + err =file_check_and_advance_wb_err (file); +if (ret ==0 ) + ret = err; +return ret; +} +EXPORT_SYMBOL (generic_buffer_fsync); +/* * Called when we've recently written block `bblock', and it is known that * `bblock' was for a buffer_boundary() buffer. This means that the block at
include/linux/buffer_head.h +2 -0
@@ -211,6 +211,8 @@ int inode_has_buffers(struct inode *);void invalidate_inode_buffers (struct inode *);int remove_inode_buffers (struct inode *inode);int sync_mapping_buffers (struct address_space *mapping); +int generic_buffer_fsync (struct file *file,loff_t start,loff_t end, +bool datasync);void clean_bdev_aliases (struct block_device *bdev,sector_t block,sector_t len);static inline void clean_bdev_bh_alias (struct buffer_head *bh)
Signature · 1 line
2.39.2
Re: [RFCv4 2/9] fs/buffer.c: Add generic_buffer_fsync implementation
Looks good:
Ritesh Harjani (IBM)
reviewerRFC v4 3/9 ext4: Use generic_buffer_fsync() implementation
In reply to Ritesh Harjani (IBM)ext4 when got converted to iomap for dio, it copied __generic_file_fsync implementation to avoid taking inode_lock in order to avoid any deadlock (since iomap takes an inode_lock while calling generic_write_sync()).
The previous patch already added generic_buffer_fsync() which does not take any inode_lock(). Hence kill the redundant code and use generic_buffer_fsync() function instead.
--- fs/ext4/fsync.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
fs/ext4/fsync.c +16 -16
@@ -28,6 +28,7 @@#include <linux/sched.h> #include <linux/writeback.h> #include <linux/blkdev.h> +#include <linux/buffer_head.h> #include "ext4.h" #include "ext4_jbd2.h"
@@ -78,21 +79,13 @@ static int ext4_sync_parent(struct inode *inode)return ret; } -static int ext4_fsync_nojournal (struct inode *inode,bool datasync, -bool *needs_barrier) +static int ext4_fsync_nojournal (struct file *file,loff_t start,loff_t end, +int datasync,bool *needs_barrier) { -int ret, err; - - ret =sync_mapping_buffers (inode->i_mapping); -if (!(inode->i_state &I_DIRTY_ALL )) -return ret; -if (datasync && !(inode->i_state &I_DIRTY_DATASYNC )) -return ret; - - err =sync_inode_metadata (inode,1 ); -if (!ret) - ret = err; +struct inode *inode = file->f_inode; +int ret; + ret =generic_buffer_fsync (file, start, end, datasync);if (!ret) ret =ext4_sync_parent (inode);if (test_opt (inode->i_sb,BARRIER ))
@@ -148,6 +141,14 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync) goto out; } +if (!sbi->s_journal) { + ret =ext4_fsync_nojournal (file, start, end, datasync, + &needs_barrier); +if (needs_barrier) + goto issue_flush; + goto out; + } + ret =file_write_and_wait_range (file, start, end);if (ret) goto out;
@@ -166,13 +167,12 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)* (they were dirtied by commit). But that's OK - the blocks are * safe in-journal, which is all fsync() needs to ensure. */ -if (!sbi->s_journal) - ret =ext4_fsync_nojournal (inode, datasync, &needs_barrier); -else if (ext4_should_journal_data (inode)) +if (ext4_should_journal_data (inode)) ret =ext4_force_commit (inode->i_sb);else ret =ext4_fsync_journal (inode, datasync, &needs_barrier); +issue_flush:if (needs_barrier) { err =blkdev_issue_flush (inode->i_sb->s_bdev);if (!ret)
Signature · 1 line
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 4/9 ext2: Use generic_buffer_fsync() implementation
In reply to Ritesh Harjani (IBM)Next patch converts ext2 to use iomap interface for DIO. iomap layer can call generic_write_sync() -> ext2_fsync() from iomap_dio_complete while still holding the inode_lock().
Now writeback from other paths doesn't need inode_lock(). It seems there is also no need of an inode_lock() for sync_mapping_buffers(). It uses it's own mapping->private_lock for it's buffer list handling.
Hence this patch is in preparation to move ext2 to iomap. This uses generic_buffer_fsync() which does not take any inode_lock() in ext2_fsync().
--- fs/ext2/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
fs/ext2/file.c +4 -1
@@ -25,6 +25,7 @@#include <linux/quotaops.h> #include <linux/iomap.h> #include <linux/uio.h> +#include <linux/buffer_head.h> #include "ext2.h" #include "xattr.h" #include "acl.h"
@@ -153,7 +154,9 @@ int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync)int ret;struct super_block *sb = file->f_mapping->host->i_sb; - ret =generic_file_fsync (file, start, end, datasync); + ret =generic_buffer_fsync (file, start, end, datasync); +if (!ret) + ret =blkdev_issue_flush (sb->s_bdev);if (ret == -EIO )/* We don't really know where the IO error happened... */ ext2_error(sb, __func__,
Signature · 1 line
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 5/9 ext2: Move direct-io to use iomap
In reply to Ritesh Harjani (IBM)This patch converts ext2 direct-io path to iomap interface.
- This also takes care of DIO_SKIP_HOLES part in which we return -ENOTBLK from ext2_iomap_begin(), in case if the write is done on a hole.
- This fallbacks to buffered-io in case of DIO_SKIP_HOLES or in case of a partial write or if any error is detected in ext2_iomap_end(). We try to return -ENOTBLK in such cases.
- For any unaligned or extending DIO writes, we pass IOMAP_DIO_FORCE_WAIT flag to ensure synchronous writes.
- For extending writes we set IOMAP_F_DIRTY in ext2_iomap_begin because otherwise with dsync writes on devices that support FUA, generic_write_sync won't be called and we might miss inode metadata updates.
- Since ext2 already now uses _nolock vartiant of sync write. Hence there is no inode lock problem with iomap in this patch.
- ext2_iomap_ops are now being shared by DIO, DAX & fiemap path
--- fs/ext2/ext2.h | 1 + fs/ext2/file.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++++ fs/ext2/inode.c | 53 ++++++++++++++-------- 3 files changed, 150 insertions(+), 19 deletions(-)
fs/ext2/ext2.h +1 -0
@@ -753,6 +753,7 @@ extern unsigned long ext2_count_free (struct buffer_head *, unsigned);extern struct inode *ext2_iget (struct super_block *,unsigned long );extern int ext2_write_inode (struct inode *,struct writeback_control *);extern void ext2_evict_inode (struct inode *); +void ext2_write_failed (struct address_space *mapping,loff_t to);extern int ext2_get_block (struct inode *,sector_t ,struct buffer_head *,int );extern int ext2_setattr (struct mnt_idmap *,struct dentry *,struct iattr *); extern int ext2_getattr (struct mnt_idmap *, const struct path *,
fs/ext2/file.c +115 -0
133 lines not on this page · raw message
fs/ext2/inode.c +34 -19
91 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [RFCv4 5/9] ext2: Move direct-io to use iomap
Looks good based on my limited ext2 knowledge:
Ritesh Harjani (IBM)
reviewerRFC v4 6/9 fs.h: Add TRACE_IOCB_STRINGS for use in trace points
In reply to Ritesh Harjani (IBM)Add TRACE_IOCB_STRINGS macro which can be used in the trace point patch to print different flag values with meaningful string output.
--- include/linux/fs.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
include/linux/fs.h +14 -0
@@ -340,6 +340,20 @@ enum rw_hint {/* can use bio alloc cache */ #define IOCB_ALLOC_CACHE (1 << 21) +/* for use in trace events */ +#define TRACE_IOCB_STRINGS \ + { IOCB_HIPRI, "HIPRI" }, \ + { IOCB_DSYNC, "DSYNC" }, \ + { IOCB_SYNC, "SYNC" }, \ + { IOCB_NOWAIT, "NOWAIT" }, \ + { IOCB_APPEND, "APPEND" }, \ + { IOCB_EVENTFD, "EVENTFD"}, \ + { IOCB_DIRECT, "DIRECT" }, \ + { IOCB_WRITE, "WRITE" }, \ + { IOCB_WAITQ, "WAITQ" }, \ + { IOCB_NOIO, "NOIO" }, \ + { IOCB_ALLOC_CACHE, "ALLOC_CACHE" } +struct kiocb {struct file *ki_filp;loff_t ki_pos;
Signature · 1 line
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 7/9 ext2: Add direct-io trace points
In reply to Ritesh Harjani (IBM)This patch adds the trace point to ext2 direct-io apis in fs/ext2/file.c
Here is how the output looks like
xfs_io-4099 [004] 81.431800: ext2_dio_write_iter_start: dev 7:7 ino 0xc isize 0x4000 pos 0x4000 count 4096 flags DIRECT aio 0 ret=0
xfs_io-4099 [004] 81.432002: ext2_dio_write_end_io: dev 7:7 ino 0xc isize 0x5000 pos 0x4000 count 4096 flags DIRECT aio 0 ret=0
xfs_io-4099 [004] 81.432014: ext2_dio_write_iter_dio_end: dev 7:7 ino 0xc isize 0x5000 pos 0x5000 count 0 flags DIRECT aio 0 ret=4096
aio-dio-fcntl-r-4103 [005] 81.461123: ext2_dio_write_iter_start: dev 7:7 ino 0xc isize 0x400 pos 0x200 count 512 flags DIRECT|WRITE aio 1 ret=0
aio-dio-fcntl-r-4103 [005] 81.462099: ext2_dio_write_end_io: dev 7:7 ino 0xc isize 0x400 pos 0x200 count 512 flags DIRECT|WRITE aio 1 ret=0
aio-dio-fcntl-r-4103 [005] 81.462133: ext2_dio_write_iter_dio_end: dev 7:7 ino 0xc isize 0x400 pos 0x400 count 0 flags DIRECT|WRITE aio 1 ret=512--- fs/ext2/Makefile | 5 ++- fs/ext2/file.c | 10 +++++- fs/ext2/trace.c | 6 ++++ fs/ext2/trace.h | 94 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 113 insertions(+), 2 deletions(-) create mode 100644 fs/ext2/trace.c create mode 100644 fs/ext2/trace.h
fs/ext2/Makefile +4 -1
@@ -6,7 +6,10 @@ obj-$(CONFIG_EXT2_FS) += ext2.o ext2-y := balloc.o dir.o file.o ialloc.o inode.o \ - ioctl.o namei.o super.o symlink.o + ioctl.o namei.o super.o symlink.o trace.o + +# For tracepoints to include our trace.h from tracepoint infrastructure +CFLAGS_trace.o := -I$(src) ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o ext2-$(CONFIG_EXT2_FS_POSIX_ACL) += acl.o
fs/ext2/file.c +9 -1
@@ -29,6 +29,7 @@#include "ext2.h" #include "xattr.h" #include "acl.h" +#include "trace.h" #ifdef CONFIG_FS_DAX static ssize_t ext2_dax_read_iter (struct kiocb *iocb,struct iov_iter *to)
@@ -170,9 +171,11 @@ static ssize_t ext2_dio_read_iter(struct kiocb *iocb, struct iov_iter *to)struct inode *inode = file->f_mapping->host;ssize_t ret; +trace_ext2_dio_read_begin (iocb, to,0 );inode_lock_shared (inode); ret =iomap_dio_rw (iocb, to, &ext2_iomap_ops,NULL ,0 ,NULL ,0 );inode_unlock_shared (inode); +trace_ext2_dio_read_end (iocb, to, ret);return ret; }
@@ -200,6 +203,7 @@ static int ext2_dio_write_end_io(struct kiocb *iocb, ssize_t size,mark_inode_dirty (inode); } out: +trace_ext2_dio_write_endio (iocb, size, error);return error; }
@@ -216,7 +220,9 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)unsigned long blocksize = inode->i_sb->s_blocksize;loff_t offset = iocb->ki_pos;loff_t count =iov_iter_count (from); +ssize_t status =0 ; +trace_ext2_dio_write_begin (iocb, from,0 );inode_lock (inode); ret =generic_write_checks (iocb, from);if (ret <=0 )
@@ -244,7 +250,6 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)/* handle case for partial write and for fallback to buffered write */ if (ret >=0 &&iov_iter_count (from)) {loff_t pos, endbyte; -ssize_t status;int ret2; iocb->ki_flags &= ~IOCB_DIRECT ;
@@ -270,6 +275,9 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from) out_unlock:inode_unlock (inode); +if (status) +trace_ext2_dio_write_buff_end (iocb, from, status); +trace_ext2_dio_write_end (iocb, from, ret);return ret; }
fs/ext2/trace.c new file +6 -0
@@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "ext2.h" +#include <linux/uio.h> + +#define CREATE_TRACE_POINTS +#include "trace.h"
fs/ext2/trace.h new file +94 -0
94 lines not on this page · raw message
Signature · 1 line
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 8/9 iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
In reply to Ritesh Harjani (IBM)IOMAP_DIO_NOSYNC earlier was added for use in btrfs. But it seems for aio dsync writes this is not useful anyway. For aio dsync case, we we queue the request and return -EIOCBQUEUED. Now, since IOMAP_DIO_NOSYNC doesn't let iomap_dio_complete() to call generic_write_sync(), hence we may lose the sync write.
Hence kill this flag as it is not in use by any FS now.
--- fs/iomap/direct-io.c | 2 +- include/linux/iomap.h | 6 ------ 2 files changed, 1 insertion(+), 7 deletions(-)
fs/iomap/direct-io.c +1 -1
@@ -541,7 +541,7 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, }/* for data sync or sync, we need sync completion processing */ -if (iocb_is_dsync (iocb) && !(dio_flags &IOMAP_DIO_NOSYNC )) { +if (iocb_is_dsync (iocb)) { dio->flags |=IOMAP_DIO_NEED_SYNC ;/*
include/linux/iomap.h +0 -6
@@ -377,12 +377,6 @@ struct iomap_dio_ops {*/ #define IOMAP_DIO_PARTIAL (1 << 2) -/* -* The caller will sync the write if needed; do not sync it within -* iomap_dio_rw. Overrides IOMAP_DIO_FORCE_WAIT. -*/ -#define IOMAP_DIO_NOSYNC (1 << 3) -ssize_t iomap_dio_rw (struct kiocb *iocb,struct iov_iter *iter,const struct iomap_ops *ops,const struct iomap_dio_ops *dops,unsigned int dio_flags,void *private,size_t done_before);
Signature · 1 line
2.39.2
Ritesh Harjani (IBM)
reviewerRFC v4 9/9 iomap: Add couple of DIO tracepoints
In reply to Ritesh Harjani (IBM)Add iomap_dio_rw_queued and iomap_dio_complete tracepoint. iomap_dio_rw_queued is mostly only to know that the request was queued and -EIOCBQUEUED was returned. It is mostly iomap_dio_complete which has all the details.
<output log>
a.out-1827 [004] 707.806763: iomap_dio_rw_queued: dev 7:7 ino 0xd size 0x1000 offset 0x1000 length 0x0
ksoftirqd/3-31 [003] 707.806968: iomap_dio_complete: dev 7:7 ino 0xd size 0x1000 offset 0x1000 flags DIRECT aio 1 error 0 ret 4096--- fs/iomap/direct-io.c | 5 ++++- fs/iomap/trace.c | 1 + fs/iomap/trace.h | 35 +++++++++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+), 1 deletion(-)
fs/iomap/direct-io.c +4 -1
@@ -130,6 +130,7 @@ ssize_t iomap_dio_complete(struct iomap_dio *dio)if (ret >0 ) ret += dio->done_before; +trace_iomap_dio_complete (iocb, dio->error, ret);kfree (dio);return ret;
@@ -650,8 +651,10 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,*/ dio->wait_for_completion = wait_for_completion;if (!atomic_dec_and_test (&dio->ref)) { -if (!wait_for_completion) +if (!wait_for_completion) { +trace_iomap_dio_rw_queued (inode, iomi.pos, iomi.len);return ERR_PTR (-EIOCBQUEUED ); + }for (;;) {set_current_state (TASK_UNINTERRUPTIBLE );
fs/iomap/trace.c +1 -0
@@ -3,6 +3,7 @@* Copyright (c) 2019 Christoph Hellwig */ #include <linux/iomap.h> +#include <linux/uio.h> /* * We include this last to have the helpers above available for the trace
fs/iomap/trace.h +35 -0
@@ -83,6 +83,7 @@ DEFINE_RANGE_EVENT(iomap_writepage);DEFINE_RANGE_EVENT (iomap_release_folio);DEFINE_RANGE_EVENT (iomap_invalidate_folio);DEFINE_RANGE_EVENT (iomap_dio_invalidate_fail); +DEFINE_RANGE_EVENT (iomap_dio_rw_queued);#define IOMAP_TYPE_STRINGS \ { IOMAP_HOLE, "HOLE" }, \
@@ -183,6 +184,40 @@ TRACE_EVENT(iomap_iter, (void *)__entry->caller) ); +TRACE_EVENT (iomap_dio_complete, + TP_PROTO(struct kiocb *iocb, int error, ssize_t ret), +TP_ARGS (iocb, error, ret), +TP_STRUCT__entry ( + __field(dev_t, dev) + __field(ino_t, ino) + __field(loff_t, isize) + __field(loff_t, pos) + __field(int, ki_flags) + __field(bool, aio) + __field(int, error) +__field (ssize_t, ret) + ), +TP_fast_assign ( + __entry->dev = file_inode(iocb->ki_filp)->i_sb->s_dev; + __entry->ino = file_inode(iocb->ki_filp)->i_ino; + __entry->isize = file_inode(iocb->ki_filp)->i_size; + __entry->pos = iocb->ki_pos; + __entry->ki_flags = iocb->ki_flags; + __entry->aio = !is_sync_kiocb(iocb); + __entry->error = error; + __entry->ret = ret; + ), +TP_printk ("dev %d:%d ino 0x%lx size 0x%llx offset 0x%llx flags %s aio %d error %d ret %zd" , +MAJOR (__entry->dev),MINOR (__entry->dev), + __entry->ino, + __entry->isize, + __entry->pos, +__print_flags (__entry->ki_flags,"|" ,TRACE_IOCB_STRINGS ), + __entry->aio, + __entry->error, + __entry->ret) +); +#endif /* _IOMAP_TRACE_H */ #undef TRACE_INCLUDE_PATH
Signature · 1 line
2.39.2
Re: [RFCv4 9/9] iomap: Add couple of DIO tracepoints
Quoted 4 lines · Ritesh Harjani (IBM)
Add
iomap_dio_rw_queuedandiomap_dio_completetracepoint.iomap_dio_rw_queuedis mostly only to know that the request was queued and-EIOCBQUEUEDwas returned. It is mostlyiomap_dio_completewhich has all the details.
Everything that is here looks good to me. But it seems like we lost the _begin tracepoint?
Ritesh Harjani (IBM)
reviewerRe: [RFCv4 9/9] iomap: Add couple of DIO tracepoints
Quoted 8 lines · Christoph Hellwig
Quoted 4 lines · Ritesh Harjani (IBM)
Add
iomap_dio_rw_queuedandiomap_dio_completetracepoint.iomap_dio_rw_queuedis mostly only to know that the request was queued and-EIOCBQUEUEDwas returned. It is mostlyiomap_dio_completewhich has all the details.Everything that is here looks good to me. But it seems like we lost the
_begintracepoint?
Sorry, my bad, I might have only partially understood your review comment then. Will quickly send the next rev.
So in the next rev. will only just add a _begin tracepoint in __iomap_dio_rw() function. Rest everything should be as is.
Right?
Re: [RFCv4 9/9] iomap: Add couple of DIO tracepoints
Quoted 4 lines · Ritesh Harjani
Sorry, my bad, I might have only partially understood your review comment then. Will quickly send the next rev.
So in the next rev. will only just add a_begintracepoint in__iomap_dio_rw()function. Rest everything should be as is.
Thanks and sorry for beeing unclear.