Skip to contentSkip to conversation

package/linux-firmware: add rpi settings files

PATCH New Frank Hunleth 3 participants 3 messages Oct 17, 2020 – Oct 29, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/linux-firmware: add rpi settings files

The brcmfmac drivers now load settings files for BCM434xx devices and fail if they're missing on the Raspberry Pi:

brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2

This commit copies the missing settings files over to the firmware directory with the other files.

---
 package/linux-firmware/linux-firmware.mk | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
package/linux-firmware/linux-firmware.mk +4 -1
index 8a44129102..e2a6ebcbf1 100644
@@ -547,7 +547,10 @@ LINUX_FIRMWARE_FILES += \
 	brcm/brcmfmac43362-sdio.bin brcm/brcmfmac43430-sdio.bin \
 	brcm/brcmfmac43430a0-sdio.bin brcm/brcmfmac43455-sdio.bin \
 	brcm/brcmfmac43569.bin brcm/brcmfmac43570-pcie.bin \
-	brcm/brcmfmac43602-pcie.ap.bin brcm/brcmfmac43602-pcie.bin
+	brcm/brcmfmac43602-pcie.ap.bin brcm/brcmfmac43602-pcie.bin \
+	brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt \
+	brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt \
+	brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
 LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.broadcom_bcm43xx
 endif
 
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/1 package/linux-firmware: add rpi settings files

Frank, All,

On 2020-10-17 11:18 -0400, Frank Hunleth spake thusly:

Quoted 9 lines

The brcmfmac drivers now load settings files for BCM434xx devices and fail if they're missing on the Raspberry Pi:

brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2

This commit copies the missing settings files over to the firmware directory with the other files.

Applied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 23 lines
---
 package/linux-firmware/linux-firmware.mk | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
package/linux-firmware/linux-firmware.mk +4 -1
index 8a44129102..e2a6ebcbf1 100644
@@ -547,7 +547,10 @@ LINUX_FIRMWARE_FILES += \
 	brcm/brcmfmac43362-sdio.bin brcm/brcmfmac43430-sdio.bin \
 	brcm/brcmfmac43430a0-sdio.bin brcm/brcmfmac43455-sdio.bin \
 	brcm/brcmfmac43569.bin brcm/brcmfmac43570-pcie.bin \
-	brcm/brcmfmac43602-pcie.ap.bin brcm/brcmfmac43602-pcie.bin
+	brcm/brcmfmac43602-pcie.ap.bin brcm/brcmfmac43602-pcie.bin \
+	brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt \
+	brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt \
+	brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
 LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.broadcom_bcm43xx
 endif
 
Signature · 1 line
2.25.1
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#2 lore raw

PATCH 1/1 package/linux-firmware: add rpi settings files

In reply to Frank Hunleth
Quoted 11 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Frank" == Frank Hunleth <[email protected]> writes:

The brcmfmac drivers now load settings files for BCM434xx devices and fail if they're missing on the Raspberry Pi:

brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2

This commit copies the missing settings files over to the firmware directory with the other files.

Committed to 2020.02.x (except for the RPI4 file which isn't present) and 2020.08.x, thanks.

Signature · 1 line
Bye, Peter Korsgaard