dim: Add helpers to move fixes branches up.
PATCH 1/1 dim: Add helpers to move fixes branches up.
One of main doubts I had when starting maintaining the fixes branches was when to move them, but also how, to-where, and when avoid moving and stay on the current one.
So this scripts aims to avoid doubts and mistakes on fixes maintainance besides making all bases more clear and standardized.
--- dim | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ dim.rst | 13 +++++++++++++ 2 files changed, 63 insertions(+)
dim +50 -0
@@ -918,6 +918,56 @@ function dim_apply_pull return $rv } +function rebase_branch +{ + local branch newbase + + branch=${1:?$usage} + shift + newbase=${1:?$usage} + shift + + assert_branch $branch + assert_repo_clean + + $DRY git rebase $newbase "$@" +} + +dim_alias_rf=rebase-fixes +function dim_rebase_fixes +{ + local tag commit + + commit=$(git rev-list --tags --max-count=1 --remotes=$DIM_DRM_INTEL) + tag=$(git describe --tags $commit) + + if [[ $tag != *"-rc"* ]]; then + echoerr "Tag $tag is not an -rc one." + return 1; + fi + + rebase_branch drm-intel-fixes $tag "$@" + + if [ $DRY ]; then + return 0; + fi + + if [ $(git rev-parse HEAD) != $commit ]; then + git reset --hard $DIM_DRM_INTEL_REMOTE/drm-intel-fixes + echoerr "ERROR: fixes didn't fully propagated yet, aborting" + fi +} + +dim_alias_rnf=rebase-next-fixes +function dim_rebase_next_fixes +{ + local dim_drm_upstream_remote + + dim_drm_upstream_remote=$(url_to_remote $drm_upstream_git) + + rebase_branch drm-intel-next-fixes $dim_drm_upstream_remote/drm-next "$@" +} + function dim_backmerge { local branch upstream patch_file
dim.rst +13 -0
@@ -376,6 +376,19 @@ apply-pull *branch* ------------------- Reads a pull request mail from stdin and merges it into the given *branch*. +rebase-fixes +------------ +Rebases drm-intel-fixes to latest Linus tag. +This command is to be used following a Linus "-rc" tag, in order to move +drm-intel-fixes branch up. +It fails if tag is not an -rc tag. +It fails if your current fixes didn't fully propagated yet. + +rebase-fixes-next +----------------- +Rebases drm-intel-next queued into drm-next. +This command is to be used after drm-next is closed for new features. + backmerge *branch* *upstream* -----------------------------
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines · Rodrigo Vivi
One of main doubts I had when starting maintaining the fixes branches was when to move them, but also how, to-where, and when avoid moving and stay on the current one.
Quoted 8 lines
So this scripts aims to avoid doubts and mistakes on fixes maintainance besides making all bases more clear and standardized.
Cc Jani Nikula <[email protected]>Cc Joonas Lahtinen <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>
I think calling these rebase is not good, and doing an actual rebase is also not good really. Here's my thoughts on this:
- I'd call the command "forward"
- It should do a fast forward only, and if that fails, abort. So git merge --ff-only. If fast-forward isn't possible I think it should suggest to do a dim backmerge, but only if moving forward is really required.
- There's more than drm-intel.git in dim, I think it'd be great if we can make this work for other repos. Currently the meaning of the 3 branches is hard-coded in dim_push_branch at the end where we call update_linux_next. I think it'd be good to extract this information into nightly.conf (as an array perhaps, indexed by repo name, with the three names, not sure how to do that best). With that you could do a generic dim forward(-branch) which would pick the right logic depending whether you're on -fixes, -next-fixes or the main feature branch.
Thoughts?
-Daniel
Quoted 93 lines
--- dim | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ dim.rst | 13 +++++++++++++ 2 files changed, 63 insertions(+)dim +50
-0@@ -918,6 +918,56 @@ function dim_apply_pull return $rv } +function rebase_branch +{ + local branch newbase + + branch=${1:?$usage} + shift + newbase=${1:?$usage} + shift + + assert_branch $branch + assert_repo_clean + + $DRY git rebase $newbase "$@" +} + +dim_alias_rf=rebase-fixes +function dim_rebase_fixes +{ + local tag commit + + commit=$(git rev-list --tags --max-count=1 --remotes=$DIM_DRM_INTEL) + tag=$(git describe --tags $commit) + + if [[ $tag != *"-rc"* ]]; then + echoerr "Tag $tag is not an -rc one." + return 1; + fi + + rebase_branch drm-intel-fixes $tag "$@" + + if [ $DRY ]; then + return 0; + fi + + if [ $(git rev-parse HEAD) != $commit ]; then + git reset --hard $DIM_DRM_INTEL_REMOTE/drm-intel-fixes + echoerr "ERROR: fixes didn't fully propagated yet, aborting" + fi +} + +dim_alias_rnf=rebase-next-fixes +function dim_rebase_next_fixes +{ + local dim_drm_upstream_remote + + dim_drm_upstream_remote=$(url_to_remote $drm_upstream_git) + + rebase_branch drm-intel-next-fixes $dim_drm_upstream_remote/drm-next "$@" +} + function dim_backmerge { local branch upstream patch_filedim.rst +13
-0@@ -376,6 +376,19 @@ apply-pull *branch* ------------------- Reads a pull request mail from stdin and merges it into the given *branch*. +rebase-fixes +------------ +Rebases drm-intel-fixes to latest Linus tag. +This command is to be used following a Linus "-rc" tag, in order to move +drm-intel-fixes branch up. +It fails if tag is not an -rc tag. +It fails if your current fixes didn't fully propagated yet. + +rebase-fixes-next +----------------- +Rebases drm-intel-next queued into drm-next. +This command is to be used after drm-next is closed for new features. + backmerge *branch* *upstream* -----------------------------Signature · 1 line
2.13.5
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 32 lines · Daniel Vetter
Quoted 4 lines · Rodrigo Vivi
One of main doubts I had when starting maintaining the fixes branches was when to move them, but also how, to-where, and when avoid moving and stay on the current one.
Quoted 8 lines
So this scripts aims to avoid doubts and mistakes on fixes maintainance besides making all bases more clear and standardized.
Cc Jani Nikula <[email protected]>Cc Joonas Lahtinen <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>I think calling these rebase is not good, and doing an actual rebase is also not good really. Here's my thoughts on this:
- I'd call the command "forward"
- It should do a fast forward only, and if that fails, abort. So git merge --ff-only. If fast-forward isn't possible I think it should suggest to do a dim backmerge, but only if moving forward is really required.
- There's more than drm-intel.git in dim, I think it'd be great if we can make this work for other repos. Currently the meaning of the 3 branches is hard-coded in
dim_push_branchat the end where we callupdate_linux_next. I think it'd be good to extract this information into nightly.conf (as an array perhaps, indexed by repo name, with the three names, not sure how to do that best). With that you could do a generic dim forward(-branch) which would pick the right logic depending whether you're on -fixes, -next-fixes or the main feature branch.
Quoted 1 line
Thoughts?
I have a bunch of refactoring in the pipeline relying more and more on the information in nightly.conf so I suggest holding off until those have landed.
BR,
Jani.
Quoted 95 lines
-Daniel
Quoted 93 lines
--- dim | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ dim.rst | 13 +++++++++++++ 2 files changed, 63 insertions(+)dim +50
-0@@ -918,6 +918,56 @@ function dim_apply_pull return $rv } +function rebase_branch +{ + local branch newbase + + branch=${1:?$usage} + shift + newbase=${1:?$usage} + shift + + assert_branch $branch + assert_repo_clean + + $DRY git rebase $newbase "$@" +} + +dim_alias_rf=rebase-fixes +function dim_rebase_fixes +{ + local tag commit + + commit=$(git rev-list --tags --max-count=1 --remotes=$DIM_DRM_INTEL) + tag=$(git describe --tags $commit) + + if [[ $tag != *"-rc"* ]]; then + echoerr "Tag $tag is not an -rc one." + return 1; + fi + + rebase_branch drm-intel-fixes $tag "$@" + + if [ $DRY ]; then + return 0; + fi + + if [ $(git rev-parse HEAD) != $commit ]; then + git reset --hard $DIM_DRM_INTEL_REMOTE/drm-intel-fixes + echoerr "ERROR: fixes didn't fully propagated yet, aborting" + fi +} + +dim_alias_rnf=rebase-next-fixes +function dim_rebase_next_fixes +{ + local dim_drm_upstream_remote + + dim_drm_upstream_remote=$(url_to_remote $drm_upstream_git) + + rebase_branch drm-intel-next-fixes $dim_drm_upstream_remote/drm-next "$@" +} + function dim_backmerge { local branch upstream patch_filedim.rst +13
-0@@ -376,6 +376,19 @@ apply-pull *branch* ------------------- Reads a pull request mail from stdin and merges it into the given *branch*. +rebase-fixes +------------ +Rebases drm-intel-fixes to latest Linus tag. +This command is to be used following a Linus "-rc" tag, in order to move +drm-intel-fixes branch up. +It fails if tag is not an -rc tag. +It fails if your current fixes didn't fully propagated yet. + +rebase-fixes-next +----------------- +Rebases drm-intel-next queued into drm-next. +This command is to be used after drm-next is closed for new features. + backmerge *branch* *upstream* -----------------------------Signature · 1 line
2.13.5
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx